View previous topic :: View next topic |
Author |
Message |
agk n00b
Joined: 03 Sep 2013 Posts: 2
|
Posted: Tue Sep 03, 2013 11:04 am Post subject: Network does't work on mobo GA-970A-DS3P (LAN r8169) |
|
|
Hello.
I can't get LAN work on new motherboard GA-970A-DS3P.
I've booted from minimal-amd64 and livecd-amd64 - the same problems.
But when I booted from minimal-x32 the LAN was working properly.
I made a diagnostic script to compare those system states and saw following differences:
Code: | NETDEV WATCHDOG: enp3s0 (r8169): transmit queue 0 timed out
....
[ 438.846403] Modules linked in:
[ 438.846554] Call Trace:
[ 438.846556] <IRQ> [<ffffffff813af400>] ? dev_watchdog+0xa6/0x1ec
[ 438.846568] [<ffffffff81031eef>] ? warn_slowpath_common+0x78/0x8c
[ 438.846573] [<ffffffff81031f9b>] ? warn_slowpath_fmt+0x45/0x4a
[ 438.846579] [<ffffffff813af4ab>] ? dev_watchdog+0x151/0x1ec
[ 438.846583] [<ffffffff81043b15>] ? __queue_work+0x256/0x256
[ 438.846588] [<ffffffff813af35a>] ? pfifo_fast_dequeue+0xb8/0xb8
[ 438.846593] [<ffffffff8103b687>] ? call_timer_fn.isra.34+0x1d/0x73
[ 438.846598] [<ffffffff8103b837>] ? run_timer_softirq+0x15a/0x1a0
[ 438.846611] [<ffffffff8104ae50>] ? hrtimer_run_queues+0xec/0x1cc
[ 438.846613] [<ffffffff81037788>] ? __do_softirq+0x9c/0x145
[ 438.846615] [<ffffffff8142f29c>] ? call_softirq+0x1c/0x30
[ 438.846617] [<ffffffff8100ab52>] ? do_softirq+0x3c/0x7a
[ 438.846618] [<ffffffff81037907>] ? irq_exit+0x41/0x60
[ 438.846620] [<ffffffff81022e43>] ? smp_apic_timer_interrupt+0x83/0x91
[ 438.846622] [<ffffffff8142eb5d>] ? apic_timer_interrupt+0x6d/0x80
[ 438.846622] <EOI> [<ffffffff813756b6>] ? cpuidle_wrap_enter+0x3b/0x71
[ 438.846626] [<ffffffff813756af>] ? cpuidle_wrap_enter+0x34/0x71
[ 438.846628] [<ffffffff81375427>] ? cpuidle_enter_state+0xc/0x31
[ 438.846630] [<ffffffff813761a1>] ? ladder_select_state+0x2e/0x179
[ 438.846631] [<ffffffff81375425>] ? cpuidle_enter_state+0xa/0x31
[ 438.846633] [<ffffffff813754ef>] ? cpuidle_idle_call+0xa3/0xc3
[ 438.846634] [<ffffffff8101023e>] ? cpu_idle+0x52/0x96
[ 438.846635] ---[ end trace 5fd89abb0545b575 ]---
[ 438.888570] r8169 0000:03:00.0 enp3s0: link up
|
More details:
script: https://dl.dropboxusercontent.com/u/34678857/dump_hw.sh
working LAN (x32): https://dl.dropboxusercontent.com/u/34678857/x32.dump.txt
broken LAN (amd64): https://dl.dropboxusercontent.com/u/34678857/x64.dump.txt
Please help me to setup amd64 system. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
|
Back to top |
|
|
agk n00b
Joined: 03 Sep 2013 Posts: 2
|
Posted: Tue Sep 03, 2013 7:09 pm Post subject: |
|
|
Does not work too. |
|
Back to top |
|
|
Jaglover Watchman
Joined: 29 May 2005 Posts: 8291 Location: Saint Amant, Acadiana
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Tue Sep 03, 2013 7:42 pm Post subject: |
|
|
r8168 may also not work, but worth a try.
I have an 8168/8111 where neither works. Someday I may have to try ndiswrapper just for fun. sad thing is earlier kernels used to run either one. _________________ Defund the FCC. |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9679 Location: almost Mile High in the USA
|
Posted: Wed Sep 18, 2013 11:36 pm Post subject: |
|
|
I have a couple Gigabyte boards, haven't had too much of a problem with ethernet:
EP43-UD3L (running x86_64 Linux 3.9.2-stock)
Code: | 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology Motherboard
Kernel driver in use: r8169
Kernel modules: r8169
|
G31MX-S2 (despite it says it's an AMD board, running x86 Linux 3.5.7-gentoo)
Code: | 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Subsystem: Giga-byte Technology GA-MA69G-S3H Motherboard
Kernel driver in use: r8169
Kernel modules: r8169
|
Z68AP-D3 (running x86_64 Linux 3.9.2-stock)
Code: | 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Giga-byte Technology Motherboard
Kernel driver in use: r8169
Kernel modules: r8169
|
Hmm... Don't know what's going wrong here... Most of the time these realteks seem to just work. _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
marmoras n00b
Joined: 12 May 2012 Posts: 14
|
Posted: Thu Sep 26, 2013 11:49 pm Post subject: |
|
|
I have gay boards and through many kernels with no problem. I recall in some other distro, I think fedora, it was requesting firmware. In all my gentoos I install linux-firmware package on the base system, so I don't know if it helps to install this package |
|
Back to top |
|
|
|