| View previous topic :: View next topic |
| Author |
Message |
cmdic
n00b
Joined: 06 Apr 2012
Posts: 27
|
 Posted: Thu Aug 29, 2013 10:40 pm Post subject: ssd upgraded to systemd high disk wait |
 |
|
Hi,
I have just upgraded my system to systemd and now I am experiencing very high disk wait on my ssd.
I ran an fsck-check, which did some stuff, but the problem remains. I also ran a SMART check, which was passed
Here is part of my dmesg:
| Quote: | [ 1399.610764] ata1.00: exception Emask 0x0 SAct 0x7ffffc07 SErr 0x0 action 0x6 frozen
[ 1399.610772] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610781] ata1.00: cmd 60/08:00:20:09:86/00:00:05:00:00/40 tag 0 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610785] ata1.00: status: { DRDY }
[ 1399.610789] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610796] ata1.00: cmd 60/00:08:10:e6:7c/01:00:09:00:00/40 tag 1 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610800] ata1.00: status: { DRDY }
[ 1399.610803] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610811] ata1.00: cmd 60/08:10:10:cf:47/00:00:07:00:00/40 tag 2 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610815] ata1.00: status: { DRDY }
[ 1399.610818] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610828] ata1.00: cmd 60/08:50:78:08:86/00:00:05:00:00/40 tag 10 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610830] ata1.00: status: { DRDY }
[ 1399.610831] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610834] ata1.00: cmd 60/08:58:80:08:86/00:00:05:00:00/40 tag 11 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610836] ata1.00: status: { DRDY }
[ 1399.610837] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610841] ata1.00: cmd 60/08:60:88:08:86/00:00:05:00:00/40 tag 12 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610842] ata1.00: status: { DRDY }
[ 1399.610844] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610847] ata1.00: cmd 60/08:68:90:08:86/00:00:05:00:00/40 tag 13 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610849] ata1.00: status: { DRDY }
[ 1399.610850] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610853] ata1.00: cmd 60/08:70:98:08:86/00:00:05:00:00/40 tag 14 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610855] ata1.00: status: { DRDY }
[ 1399.610857] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610860] ata1.00: cmd 60/08:78:a0:08:86/00:00:05:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610862] ata1.00: status: { DRDY }
[ 1399.610863] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610866] ata1.00: cmd 60/08:80:a8:08:86/00:00:05:00:00/40 tag 16 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610868] ata1.00: status: { DRDY }
[ 1399.610869] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610873] ata1.00: cmd 60/08:88:b0:08:86/00:00:05:00:00/40 tag 17 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610874] ata1.00: status: { DRDY }
[ 1399.610876] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610879] ata1.00: cmd 60/08:90:b8:08:86/00:00:05:00:00/40 tag 18 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610881] ata1.00: status: { DRDY }
[ 1399.610882] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610885] ata1.00: cmd 60/08:98:c0:08:86/00:00:05:00:00/40 tag 19 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610887] ata1.00: status: { DRDY }
[ 1399.610889] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610892] ata1.00: cmd 60/08:a0:c8:08:86/00:00:05:00:00/40 tag 20 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610893] ata1.00: status: { DRDY }
[ 1399.610895] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610898] ata1.00: cmd 60/08:a8:d0:08:86/00:00:05:00:00/40 tag 21 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610900] ata1.00: status: { DRDY }
[ 1399.610901] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610905] ata1.00: cmd 60/08:b0:d8:08:86/00:00:05:00:00/40 tag 22 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610906] ata1.00: status: { DRDY }
[ 1399.610908] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610911] ata1.00: cmd 60/08:b8:e0:08:86/00:00:05:00:00/40 tag 23 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610913] ata1.00: status: { DRDY }
[ 1399.610914] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610917] ata1.00: cmd 60/08:c0:e8:08:86/00:00:05:00:00/40 tag 24 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610919] ata1.00: status: { DRDY }
[ 1399.610920] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610924] ata1.00: cmd 60/08:c8:f0:08:86/00:00:05:00:00/40 tag 25 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610925] ata1.00: status: { DRDY }
[ 1399.610927] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610930] ata1.00: cmd 60/08:d0:f8:08:86/00:00:05:00:00/40 tag 26 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610932] ata1.00: status: { DRDY }
[ 1399.610933] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610936] ata1.00: cmd 60/08:d8:00:09:86/00:00:05:00:00/40 tag 27 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610938] ata1.00: status: { DRDY }
[ 1399.610939] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610943] ata1.00: cmd 60/08:e0:08:09:86/00:00:05:00:00/40 tag 28 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610944] ata1.00: status: { DRDY }
[ 1399.610946] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610949] ata1.00: cmd 60/08:e8:10:09:86/00:00:05:00:00/40 tag 29 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610951] ata1.00: status: { DRDY }
[ 1399.610952] ata1.00: failed command: READ FPDMA QUEUED
[ 1399.610955] ata1.00: cmd 60/08:f0:18:09:86/00:00:05:00:00/40 tag 30 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1399.610957] ata1.00: status: { DRDY }
[ 1399.610960] ata1: hard resetting link
[ 1400.224103] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 1400.237527] ata1.00: configured for UDMA/133
[ 1400.237967] ata1.00: device reported invalid CHS sector 0
[ 1400.237974] ata1.00: device reported invalid CHS sector 0
[ 1400.237977] ata1.00: device reported invalid CHS sector 0
[ 1400.237980] ata1.00: device reported invalid CHS sector 0
[ 1400.237983] ata1.00: device reported invalid CHS sector 0
[ 1400.237986] ata1.00: device reported invalid CHS sector 0
[ 1400.237988] ata1.00: device reported invalid CHS sector 0
[ 1400.237991] ata1.00: device reported invalid CHS sector 0
[ 1400.237994] ata1.00: device reported invalid CHS sector 0
[ 1400.237996] ata1.00: device reported invalid CHS sector 0
[ 1400.237999] ata1.00: device reported invalid CHS sector 0
[ 1400.238002] ata1.00: device reported invalid CHS sector 0
[ 1400.238004] ata1.00: device reported invalid CHS sector 0
[ 1400.238007] ata1.00: device reported invalid CHS sector 0
[ 1400.238010] ata1.00: device reported invalid CHS sector 0
[ 1400.238012] ata1.00: device reported invalid CHS sector 0
[ 1400.238015] ata1.00: device reported invalid CHS sector 0
[ 1400.238018] ata1.00: device reported invalid CHS sector 0
[ 1400.238020] ata1.00: device reported invalid CHS sector 0
[ 1400.238023] ata1.00: device reported invalid CHS sector 0
[ 1400.238026] ata1.00: device reported invalid CHS sector 0
[ 1400.238028] ata1.00: device reported invalid CHS sector 0
[ 1400.238031] ata1.00: device reported invalid CHS sector 0
[ 1400.238034] ata1.00: device reported invalid CHS sector 0
[ 1400.238044] sd 0:0:0:0: [sda]
[ 1400.238047] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238052] sd 0:0:0:0: [sda]
[ 1400.238053] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238055] Descriptor sense data with sense descriptors (in hex):
[ 1400.238056] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238062] 00 00 00 00
[ 1400.238065] sd 0:0:0:0: [sda]
[ 1400.238066] Add. Sense: No additional sense information
[ 1400.238068] sd 0:0:0:0: [sda] CDB:
[ 1400.238068] Read(10): 28 00 05 86 09 20 00 00 08 00
[ 1400.238074] blk_update_request: 21 callbacks suppressed
[ 1400.238075] end_request: I/O error, dev sda, sector 92670240
[ 1400.238088] sd 0:0:0:0: [sda]
[ 1400.238089] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238091] sd 0:0:0:0: [sda]
[ 1400.238091] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238093] Descriptor sense data with sense descriptors (in hex):
[ 1400.238094] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238100] 00 00 00 00
[ 1400.238102] sd 0:0:0:0: [sda]
[ 1400.238103] Add. Sense: No additional sense information
[ 1400.238105] sd 0:0:0:0: [sda] CDB:
[ 1400.238105] Read(10): 28 00 05 86 08 78 00 00 08 00
[ 1400.238110] end_request: I/O error, dev sda, sector 92670072
[ 1400.238115] sd 0:0:0:0: [sda]
[ 1400.238116] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238117] sd 0:0:0:0: [sda]
[ 1400.238118] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238120] Descriptor sense data with sense descriptors (in hex):
[ 1400.238121] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238126] 00 00 00 00
[ 1400.238129] sd 0:0:0:0: [sda]
[ 1400.238129] Add. Sense: No additional sense information
[ 1400.238131] sd 0:0:0:0: [sda] CDB:
[ 1400.238132] Read(10): 28 00 05 86 08 80 00 00 08 00
[ 1400.238136] end_request: I/O error, dev sda, sector 92670080
[ 1400.238140] sd 0:0:0:0: [sda]
[ 1400.238141] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238142] sd 0:0:0:0: [sda]
[ 1400.238143] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238145] Descriptor sense data with sense descriptors (in hex):
[ 1400.238146] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238151] 00 00 00 00
[ 1400.238154] sd 0:0:0:0: [sda]
[ 1400.238154] Add. Sense: No additional sense information
[ 1400.238156] sd 0:0:0:0: [sda] CDB:
[ 1400.238157] Read(10): 28 00 05 86 08 88 00 00 08 00
[ 1400.238161] end_request: I/O error, dev sda, sector 92670088
[ 1400.238165] sd 0:0:0:0: [sda]
[ 1400.238166] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238167] sd 0:0:0:0: [sda]
[ 1400.238168] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238170] Descriptor sense data with sense descriptors (in hex):
[ 1400.238171] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238176] 00 00 00 00
[ 1400.238179] sd 0:0:0:0: [sda]
[ 1400.238179] Add. Sense: No additional sense information
[ 1400.238181] sd 0:0:0:0: [sda] CDB:
[ 1400.238182] Read(10): 28 00 05 86 08 90 00 00 08 00
[ 1400.238186] end_request: I/O error, dev sda, sector 92670096
[ 1400.238190] sd 0:0:0:0: [sda]
[ 1400.238191] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238192] sd 0:0:0:0: [sda]
[ 1400.238193] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238195] Descriptor sense data with sense descriptors (in hex):
[ 1400.238195] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238201] 00 00 00 00
[ 1400.238203] sd 0:0:0:0: [sda]
[ 1400.238204] Add. Sense: No additional sense information
[ 1400.238206] sd 0:0:0:0: [sda] CDB:
[ 1400.238206] Read(10): 28 00 05 86 08 98 00 00 08 00
[ 1400.238211] end_request: I/O error, dev sda, sector 92670104
[ 1400.238215] sd 0:0:0:0: [sda]
[ 1400.238216] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238217] sd 0:0:0:0: [sda]
[ 1400.238218] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238219] Descriptor sense data with sense descriptors (in hex):
[ 1400.238220] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238226] 00 00 00 00
[ 1400.238228] sd 0:0:0:0: [sda]
[ 1400.238229] Add. Sense: No additional sense information
[ 1400.238231] sd 0:0:0:0: [sda] CDB:
[ 1400.238231] Read(10): 28 00 05 86 08 a0 00 00 08 00
[ 1400.238236] end_request: I/O error, dev sda, sector 92670112
[ 1400.238240] sd 0:0:0:0: [sda]
[ 1400.238241] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238242] sd 0:0:0:0: [sda]
[ 1400.238243] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238244] Descriptor sense data with sense descriptors (in hex):
[ 1400.238245] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238251] 00 00 00 00
[ 1400.238253] sd 0:0:0:0: [sda]
[ 1400.238254] Add. Sense: No additional sense information
[ 1400.238256] sd 0:0:0:0: [sda] CDB:
[ 1400.238256] Read(10): 28 00 05 86 08 a8 00 00 08 00
[ 1400.238261] end_request: I/O error, dev sda, sector 92670120
[ 1400.238265] sd 0:0:0:0: [sda]
[ 1400.238266] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238267] sd 0:0:0:0: [sda]
[ 1400.238268] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238269] Descriptor sense data with sense descriptors (in hex):
[ 1400.238270] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238276] 00 00 00 00
[ 1400.238278] sd 0:0:0:0: [sda]
[ 1400.238279] Add. Sense: No additional sense information
[ 1400.238281] sd 0:0:0:0: [sda] CDB:
[ 1400.238281] Read(10): 28 00 05 86 08 b0 00 00 08 00
[ 1400.238286] end_request: I/O error, dev sda, sector 92670128
[ 1400.238290] sd 0:0:0:0: [sda]
[ 1400.238291] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238292] sd 0:0:0:0: [sda]
[ 1400.238293] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238295] Descriptor sense data with sense descriptors (in hex):
[ 1400.238296] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238301] 00 00 00 00
[ 1400.238303] sd 0:0:0:0: [sda]
[ 1400.238304] Add. Sense: No additional sense information
[ 1400.238306] sd 0:0:0:0: [sda] CDB:
[ 1400.238307] Read(10): 28 00 05 86 08 b8 00 00 08 00
[ 1400.238311] end_request: I/O error, dev sda, sector 92670136
[ 1400.238315] sd 0:0:0:0: [sda]
[ 1400.238316] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238317] sd 0:0:0:0: [sda]
[ 1400.238318] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238320] Descriptor sense data with sense descriptors (in hex):
[ 1400.238321] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238326] 00 00 00 00
[ 1400.238328] sd 0:0:0:0: [sda]
[ 1400.238329] Add. Sense: No additional sense information
[ 1400.238331] sd 0:0:0:0: [sda] CDB:
[ 1400.238332] Read(10): 28 00 05 86 08 c0 00 00 08 00
[ 1400.238339] sd 0:0:0:0: [sda]
[ 1400.238340] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238341] sd 0:0:0:0: [sda]
[ 1400.238342] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238344] Descriptor sense data with sense descriptors (in hex):
[ 1400.238345] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238350] 00 00 00 00
[ 1400.238352] sd 0:0:0:0: [sda]
[ 1400.238353] Add. Sense: No additional sense information
[ 1400.238355] sd 0:0:0:0: [sda] CDB:
[ 1400.238356] Read(10): 28 00 05 86 08 c8 00 00 08 00
[ 1400.238363] sd 0:0:0:0: [sda]
[ 1400.238364] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238365] sd 0:0:0:0: [sda]
[ 1400.238366] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238368] Descriptor sense data with sense descriptors (in hex):
[ 1400.238369] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238374] 00 00 00 00
[ 1400.238377] sd 0:0:0:0: [sda]
[ 1400.238377] Add. Sense: No additional sense information
[ 1400.238379] sd 0:0:0:0: [sda] CDB:
[ 1400.238380] Read(10): 28 00 05 86 08 d0 00 00 08 00
[ 1400.238387] sd 0:0:0:0: [sda]
[ 1400.238388] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238389] sd 0:0:0:0: [sda]
[ 1400.238390] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238392] Descriptor sense data with sense descriptors (in hex):
[ 1400.238393] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238398] 00 00 00 00
[ 1400.238401] sd 0:0:0:0: [sda]
[ 1400.238402] Add. Sense: No additional sense information
[ 1400.238403] sd 0:0:0:0: [sda] CDB:
[ 1400.238404] Read(10): 28 00 05 86 08 d8 00 00 08 00
[ 1400.238411] sd 0:0:0:0: [sda]
[ 1400.238412] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238413] sd 0:0:0:0: [sda]
[ 1400.238414] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238416] Descriptor sense data with sense descriptors (in hex):
[ 1400.238417] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238422] 00 00 00 00
[ 1400.238424] sd 0:0:0:0: [sda]
[ 1400.238425] Add. Sense: No additional sense information
[ 1400.238427] sd 0:0:0:0: [sda] CDB:
[ 1400.238428] Read(10): 28 00 05 86 08 e0 00 00 08 00
[ 1400.238435] sd 0:0:0:0: [sda]
[ 1400.238436] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238437] sd 0:0:0:0: [sda]
[ 1400.238438] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238440] Descriptor sense data with sense descriptors (in hex):
[ 1400.238441] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238446] 00 00 00 00
[ 1400.238449] sd 0:0:0:0: [sda]
[ 1400.238450] Add. Sense: No additional sense information
[ 1400.238451] sd 0:0:0:0: [sda] CDB:
[ 1400.238452] Read(10): 28 00 05 86 08 e8 00 00 08 00
[ 1400.238459] sd 0:0:0:0: [sda]
[ 1400.238460] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238461] sd 0:0:0:0: [sda]
[ 1400.238462] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238464] Descriptor sense data with sense descriptors (in hex):
[ 1400.238465] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238470] 00 00 00 00
[ 1400.238473] sd 0:0:0:0: [sda]
[ 1400.238473] Add. Sense: No additional sense information
[ 1400.238475] sd 0:0:0:0: [sda] CDB:
[ 1400.238476] Read(10): 28 00 05 86 08 f0 00 00 08 00
[ 1400.238483] sd 0:0:0:0: [sda]
[ 1400.238484] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238485] sd 0:0:0:0: [sda]
[ 1400.238486] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238488] Descriptor sense data with sense descriptors (in hex):
[ 1400.238489] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238494] 00 00 00 00
[ 1400.238496] sd 0:0:0:0: [sda]
[ 1400.238497] Add. Sense: No additional sense information
[ 1400.238499] sd 0:0:0:0: [sda] CDB:
[ 1400.238500] Read(10): 28 00 05 86 08 f8 00 00 08 00
[ 1400.238507] sd 0:0:0:0: [sda]
[ 1400.238508] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238509] sd 0:0:0:0: [sda]
[ 1400.238510] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238511] Descriptor sense data with sense descriptors (in hex):
[ 1400.238512] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238518] 00 00 00 00
[ 1400.238520] sd 0:0:0:0: [sda]
[ 1400.238521] Add. Sense: No additional sense information
[ 1400.238523] sd 0:0:0:0: [sda] CDB:
[ 1400.238523] Read(10): 28 00 05 86 09 00 00 00 08 00
[ 1400.238530] sd 0:0:0:0: [sda]
[ 1400.238531] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238533] sd 0:0:0:0: [sda]
[ 1400.238534] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238535] Descriptor sense data with sense descriptors (in hex):
[ 1400.238536] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238541] 00 00 00 00
[ 1400.238544] sd 0:0:0:0: [sda]
[ 1400.238545] Add. Sense: No additional sense information
[ 1400.238546] sd 0:0:0:0: [sda] CDB:
[ 1400.238547] Read(10): 28 00 05 86 09 08 00 00 08 00
[ 1400.238554] sd 0:0:0:0: [sda]
[ 1400.238556] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238557] sd 0:0:0:0: [sda]
[ 1400.238558] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238559] Descriptor sense data with sense descriptors (in hex):
[ 1400.238560] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238565] 00 00 00 00
[ 1400.238568] sd 0:0:0:0: [sda]
[ 1400.238569] Add. Sense: No additional sense information
[ 1400.238570] sd 0:0:0:0: [sda] CDB:
[ 1400.238571] Read(10): 28 00 05 86 09 10 00 00 08 00
[ 1400.238578] sd 0:0:0:0: [sda]
[ 1400.238580] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1400.238581] sd 0:0:0:0: [sda]
[ 1400.238582] Sense Key : Aborted Command [current] [descriptor]
[ 1400.238583] Descriptor sense data with sense descriptors (in hex):
[ 1400.238584] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1400.238590] 00 00 00 00
[ 1400.238592] sd 0:0:0:0: [sda]
[ 1400.238593] Add. Sense: No additional sense information
[ 1400.238594] sd 0:0:0:0: [sda] CDB:
[ 1400.238595] Read(10): 28 00 05 86 09 18 00 00 08 00
[ 1400.238602] ata1: EH complete |
The problem mostly occus while writing or attempting to open a file.
If you need additional information, please let me know.
best regards,
cmdic |
|
| Back to top |
|
 |
eccerr0r
Watchman
Joined: 01 Jul 2004
Posts: 9679
Location: almost Mile High in the USA
|
| Posted: Fri Aug 30, 2013 12:34 am Post subject: |
|
|
These errors don't look like software problems if you just upgraded systemd...
I'd look into hardware issues - check power/data cables. Also, what SATA controller are you using (as well as kernel version, and what SSD?)
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
| Back to top |
|
|
cmdic
n00b
Joined: 06 Apr 2012
Posts: 27
|
| Posted: Thu Sep 05, 2013 9:20 pm Post subject: |
|
|
| eccerr0r wrote: | These errors don't look like software problems if you just upgraded systemd...
I'd look into hardware issues - check power/data cables. Also, what SATA controller are you using (as well as kernel version, and what SSD?) |
Hi,
thanks for the suggestion. I have plugged my SSD into a SATA 2 Port and it is running fine again.
My SSD is: Model=Corsair Force GT, FwRev=1.3.3
SATA3-Controller: 0a:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 10)
SATA2-Controller: 04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03)
Kernel-Version: 3.9.5
I actually would like to use my SATA-3-Ports. Do you think it has something to do with the kernel version? |
|
| Back to top |
|
|
eccerr0r
Watchman
Joined: 01 Jul 2004
Posts: 9679
Location: almost Mile High in the USA
|
| Posted: Thu Sep 05, 2013 10:08 pm Post subject: |
|
|
Did you upgrade the kernel recently leading to the possible correlation between it and the slowdown?
I would think this should be regression tested fairly well and a lot of people would have run into this issue. Then again I'm not sure how many people test Marvell.
I'm currently using 3.8.13 with the SATA 6Gbps ports on a Z68 and a H77, and so far so good, as well as SATA 3Gbps on JMicron and other chips. I have not tried the Marvell controllers as I don't own them.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
| Back to top |
|
|
cmdic
n00b
Joined: 06 Apr 2012
Posts: 27
|
| Posted: Fri Sep 20, 2013 4:32 am Post subject: |
|
|
Hi,
I have upgraded the Kernel to 3.10, but I keep getting the same errors. I think they occur less often, but they are there.
Here is some SMART-Data output, but I think the results look ok:
| Code: | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.7-gentoo] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: Corsair Force GT
Serial Number: 1151820200000689087A
LU WWN Device Id: 0 000000 000000000
Firmware Version: 1.3.3
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Sep 20 06:30:32 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 0/11931192
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours_and_Msec 0x0032 087 087 000 Old_age Always - 12108h+33m+07.400s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 184
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 43
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 027 059 000 Old_age Always - 27 (Min/Max 18/59)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/11931192
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/11931192
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/11931192
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 099 099 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 31488
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 3514
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 3514
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 5688
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
| Back to top |
|
|
Schnulli
Guru
Joined: 25 Jun 2010
Posts: 320
Location: Bremen DE
|
| Posted: Fri Sep 20, 2013 1:30 pm Post subject: |
|
|
| i had nearly same problems with a Marvel and a Crossair SSD, now using a H77 Board and it works fine, even on my H61 it works with this SSD |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
