Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Kernel Problem mit USB
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Nokai001
n00b
n00b


Joined: 25 Sep 2007
Posts: 28

PostPosted: Fri Jul 05, 2013 10:43 am    Post subject: Kernel Problem mit USB Reply with quote

Hi Leute,

hab mir ein neues Mainboard gekauft und den neusten Kernel installiert. Es wird auch alles erkannt. Nur nach kurzer Zeit taucht das hier im log auf:

Jul 5 12:33:53 localhost kernel: [ 558.005027] usb 1-6: configuration #1 chosen from 1 choice
Jul 5 12:33:53 localhost kernel: [ 558.005291] usb 1-6: Successful Endpoint Configure command
Jul 5 12:33:53 localhost kernel: [ 558.005332] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
Jul 5 12:33:53 localhost kernel: [ 558.005375] hub 1-6:1.0: usb_probe_interface
Jul 5 12:33:53 localhost kernel: [ 558.005379] hub 1-6:1.0: usb_probe_interface - got id
Jul 5 12:33:53 localhost kernel: [ 558.005383] hub 1-6:1.0: USB hub found
Jul 5 12:33:53 localhost kernel: [ 558.005408] hub 1-6:1.0: 4 ports detected
Jul 5 12:33:53 localhost kernel: [ 558.005412] hub 1-6:1.0: standalone hub
Jul 5 12:33:53 localhost kernel: [ 558.005416] hub 1-6:1.0: individual port power switching
Jul 5 12:33:53 localhost kernel: [ 558.005419] hub 1-6:1.0: individual port over-current protection
Jul 5 12:33:53 localhost kernel: [ 558.005712] usb 1-6: Successful Endpoint Configure command
Jul 5 12:33:53 localhost kernel: [ 558.005771] hub 1-6:1.0: TT per port
Jul 5 12:33:53 localhost kernel: [ 558.005776] hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
Jul 5 12:33:53 localhost kernel: [ 558.005781] hub 1-6:1.0: Port indicators are supported
Jul 5 12:33:53 localhost kernel: [ 558.005784] hub 1-6:1.0: power on to power good time: 100ms
Jul 5 12:33:53 localhost kernel: [ 558.005844] hub 1-6:1.0: config failed, can't get hub status (err -71)
Jul 5 12:33:53 localhost kernel: [ 558.005858] BUG: unable to handle kernel NULL pointer dereference at (null)
Jul 5 12:33:53 localhost kernel: [ 558.005871] IP: [<ffffffffa0007b4e>] hub_quiesce+0x4e/0xb0 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.005875] PGD 3c8540067 PUD 3c84c7067 PMD 0
Jul 5 12:33:53 localhost kernel: [ 558.005878] Oops: 0000 [#1] SMP
Jul 5 12:33:53 localhost kernel: [ 558.005890] Modules linked in: ftdi_sio usbserial r8169 ehci_pci usbhid xhci_hcd ohci_hcd uhci_hcd usb_storage ehci_hcd usbcore usb_common
Jul 5 12:33:53 localhost kernel: [ 558.005895] CPU: 1 PID: 2130 Comm: khubd Not tainted 3.10.0-gentoo #1
Jul 5 12:33:53 localhost kernel: [ 558.005897] Hardware name: ASUS All Series/Z87-DELUXE, BIOS 0801 04/19/2013
Jul 5 12:33:53 localhost kernel: [ 558.005899] task: ffff88040c73bd00 ti: ffff880408102000 task.ti: ffff880408102000
Jul 5 12:33:53 localhost kernel: [ 558.005908] RIP: 0010:[<ffffffffa0007b4e>] [<ffffffffa0007b4e>] hub_quiesce+0x4e/0xb0 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.005910] RSP: 0018:ffff880408103808 EFLAGS: 00010246
Jul 5 12:33:53 localhost kernel: [ 558.005912] RAX: ffff8803c5600920 RBX: ffff8803b90dc000 RCX: 0000000000000009
Jul 5 12:33:53 localhost kernel: [ 558.005913] RDX: 0000000000000000 RSI: 000000007fffffff RDI: 0000000000000000
Jul 5 12:33:53 localhost kernel: [ 558.005915] RBP: ffff880408103828 R08: ffffffff81deb848 R09: ffffffff81dff33f
Jul 5 12:33:53 localhost kernel: [ 558.005917] R10: 000000000000007c R11: 000000000002c574 R12: ffff8803b90de800
Jul 5 12:33:53 localhost kernel: [ 558.005918] R13: 0000000000000000 R14: ffff880408130a30 R15: 0000000000000064
Jul 5 12:33:53 localhost kernel: [ 558.005921] FS: 0000000000000000(0000) GS:ffff88041ec80000(0000) knlGS:0000000000000000
Jul 5 12:33:53 localhost kernel: [ 558.005923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 5 12:33:53 localhost kernel: [ 558.005925] CR2: 0000000000000000 CR3: 000000040c076000 CR4: 00000000001407e0
Jul 5 12:33:53 localhost kernel: [ 558.005927] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Jul 5 12:33:53 localhost kernel: [ 558.005928] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Jul 5 12:33:53 localhost kernel: [ 558.005929] Stack:
Jul 5 12:33:53 localhost kernel: [ 558.005933] ffff880408103868 ffff8803b90dc000 ffff8803b90de888 ffff880408130a00
Jul 5 12:33:53 localhost kernel: [ 558.005936] ffff880408103858 ffffffffa0007c3d ffff8803b90dc000 ffff880408130a00
Jul 5 12:33:53 localhost kernel: [ 558.005939] ffff8803b90de800 00000000ffffffb9 ffff880408103908 ffffffffa0009f1b
Jul 5 12:33:53 localhost kernel: [ 558.005940] Call Trace:
Jul 5 12:33:53 localhost kernel: [ 558.005950] [<ffffffffa0007c3d>] hub_disconnect+0x6d/0x130 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.005958] [<ffffffffa0009f1b>] hub_probe+0x2fb/0xb90 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.005969] [<ffffffffa0011be0>] usb_probe_interface+0x110/0x200 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.005976] [<ffffffff815184e7>] driver_probe_device+0x77/0x230
Jul 5 12:33:53 localhost kernel: [ 558.005980] [<ffffffff8151878b>] __device_attach+0x4b/0x60
Jul 5 12:33:53 localhost kernel: [ 558.005984] [<ffffffff81518740>] ? __driver_attach+0xa0/0xa0
Jul 5 12:33:53 localhost kernel: [ 558.005991] [<ffffffff81516924>] bus_for_each_drv+0x54/0x90
Jul 5 12:33:53 localhost kernel: [ 558.005995] [<ffffffff81518449>] device_attach+0x99/0xa0
Jul 5 12:33:53 localhost kernel: [ 558.005998] [<ffffffff81517968>] bus_probe_device+0x98/0xc0
Jul 5 12:33:53 localhost kernel: [ 558.006004] [<ffffffff81515d99>] device_add+0x599/0x650
Jul 5 12:33:53 localhost kernel: [ 558.006014] [<ffffffffa0010a62>] usb_set_configuration+0x5b2/0x800 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006019] [<ffffffff81514fb0>] ? dev_printk+0x40/0x50
Jul 5 12:33:53 localhost kernel: [ 558.006027] [<ffffffffa0019612>] generic_probe+0x32/0x90 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006035] [<ffffffffa0010ed5>] usb_probe_device+0x45/0x50 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006039] [<ffffffff815184e7>] driver_probe_device+0x77/0x230
Jul 5 12:33:53 localhost kernel: [ 558.006042] [<ffffffff8151878b>] __device_attach+0x4b/0x60
Jul 5 12:33:53 localhost kernel: [ 558.006046] [<ffffffff81518740>] ? __driver_attach+0xa0/0xa0
Jul 5 12:33:53 localhost kernel: [ 558.006051] [<ffffffff81516924>] bus_for_each_drv+0x54/0x90
Jul 5 12:33:53 localhost kernel: [ 558.006055] [<ffffffff81518449>] device_attach+0x99/0xa0
Jul 5 12:33:53 localhost kernel: [ 558.006058] [<ffffffff81517968>] bus_probe_device+0x98/0xc0
Jul 5 12:33:53 localhost kernel: [ 558.006064] [<ffffffff81515d99>] device_add+0x599/0x650
Jul 5 12:33:53 localhost kernel: [ 558.006072] [<ffffffffa0007eda>] usb_new_device+0x1da/0x330 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006080] [<ffffffffa00091a8>] hub_thread+0xe18/0x15d0 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006088] [<ffffffff810f9990>] ? set_next_entity+0xa0/0xc0
Jul 5 12:33:53 localhost kernel: [ 558.006092] [<ffffffff810e95b0>] ? add_wait_queue+0x60/0x60
Jul 5 12:33:53 localhost kernel: [ 558.006100] [<ffffffffa0008390>] ? hub_port_debounce+0x140/0x140 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006107] [<ffffffff810e8e6b>] kthread+0xbb/0xc0
Jul 5 12:33:53 localhost kernel: [ 558.006113] [<ffffffff810e8db0>] ? flush_kthread_worker+0xa0/0xa0
Jul 5 12:33:53 localhost kernel: [ 558.006121] [<ffffffff817e286c>] ret_from_fork+0x7c/0xb0
Jul 5 12:33:53 localhost kernel: [ 558.006127] [<ffffffff810e8db0>] ? flush_kthread_worker+0xa0/0xa0
Jul 5 12:33:53 localhost kernel: [ 558.006162] Code: 80 8b ec 00 00 00 02 41 83 fd 02 74 37 45 8b ac 24 78 03 00 00 45 85 ed 7e 2a 45 31 ed 48 8b 83 10 02 00 00 49 63 d5 48 8b 3c d0 <48> 83 3f 00 74 05 e8 07 fe ff ff 41 83 c5 01 45 39 ac 24 78 03
Jul 5 12:33:53 localhost kernel: [ 558.006168] RIP [<ffffffffa0007b4e>] hub_quiesce+0x4e/0xb0 [usbcore]
Jul 5 12:33:53 localhost kernel: [ 558.006170] RSP <ffff880408103808>
Jul 5 12:33:53 localhost kernel: [ 558.006171] CR2: 0000000000000000
Jul 5 12:33:53 localhost kernel: [ 558.006174] ---[ end trace b70061d137a24aaa ]---
Jul 5 12:35:01 localhost cron[7318]: (munin) CMD (/usr/bin/munin-cron)



lspci sagt das hier:
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04)
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #2 (rev d4)
00:1c.3 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #4 (rev d4)
00:1c.4 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #5 (rev d4)
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
01:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9125 PCIe SATA 6.0 Gb/s controller (rev 11)
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
04:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
05:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9125 PCIe SATA 6.0 Gb/s controller (rev 11)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 11)
0a:00.0 Network controller: Broadcom Corporation Device 43b1 (rev 03)
0c:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
0d:00.0 VGA compatible controller: NVIDIA Corporation NV44 [Quadro NVS 285] (rev a1)


Für mehr infos einfach Fragen.

Ich bin auf euere Antworten und Tips gespannt. Danke schon mal für euer Hilfe

Gruß
Back to top
View user's profile Send private message
Nokai001
n00b
n00b


Joined: 25 Sep 2007
Posts: 28

PostPosted: Fri Jul 12, 2013 8:01 am    Post subject: Reply with quote

Hi Leute,

Mainboard ASUS All Series/Z87-DELUXE, BIOS 0801 04/19/2013
Kernel: 3.10.0-gentoo

Hab das ganze USB zeug mal als modul gemacht. Nützt trotzdem nichts.

hat keiner eine Idee?

lsmod sagt:

Module Size Used by
ftdi_sio 34070 1
usbserial 23097 3 ftdi_sio
r8169 55133 0
ehci_pci 3536 0
usbhid 34535 0
xhci_hcd 78145 0
ohci_hcd 31138 0
uhci_hcd 30697 0
usb_storage 44881 0
ehci_hcd 48617 1 ehci_pci
usbcore 142065 9 uhci_hcd,usb_storage,usbserial,ohci_hcd,ehci_hcd,ehci_pci,usbhid,ftdi_sio,xhci_hcd
usb_common 1528 1 usbcore
Back to top
View user's profile Send private message
GOS
n00b
n00b


Joined: 09 Sep 2010
Posts: 72
Location: Germany

PostPosted: Fri Jul 12, 2013 10:04 am    Post subject: Reply with quote

Hallöchen,

würde zunächst mal das BIOS upgraden. Würde zudem mal im BIOS alles deaktivieren, was so im Bereich von "USB leagcy support" etc. liegt und dann nochmal schauen.

Zudem möchte ich Dich zum Kauf von Asus bedauern! Habe selber ein P8P67-M und das Ding ist der letzte Dreck. Fehler im Bios, für den Windoof offensichlich ein Patch hat. Reaktion des Asus-Service --> Ist uns doch wurscht; Linux interessiert uns nicht. Naja, hoffentlich ist Dein Borad nicht so schlimm ;-)

Übrigens bist Du hier im "internationalen Teil" des Forums, weshalb mit Deiner Deutschen Anfrage vermutlich niemand antworten wird. Ich weiß nicht, wie man das verschiebt, würde es aber in das Deutsche Unterforum packen. Da wird die Resonanz größer ausfallen.

Beste Grüße und viel Glück
GOS
Back to top
View user's profile Send private message
gehzumteufel
n00b
n00b


Joined: 27 May 2007
Posts: 15

PostPosted: Wed Oct 09, 2013 4:44 am    Post subject: Reply with quote

I know this is kind of an old topic, but I have the same motherboard, but just figured I'd say you're not the only one with this problem.

I posted about it here. http://forums.gentoo.org/viewtopic-p-7413214.html
Back to top
View user's profile Send private message
XavierMiller
Moderator
Moderator


Joined: 23 Jul 2004
Posts: 5285
Location: ~Brussels - Belgique

PostPosted: Wed Oct 09, 2013 6:03 am    Post subject: Reply with quote

mesage moved to the German section
_________________
Xavier Miller
(FR) Merci de respecter les règles du forum.
http://www.xaviermiller.be
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum