| View previous topic :: View next topic |
| Author |
Message |
Rooney
Apprentice
Joined: 07 Aug 2003
Posts: 193
Location: Sheffield, UK
|
 Posted: Tue May 14, 2013 11:04 am Post subject: Missing CONFIG_VIDEO_CX88_DVB [SOLVED] |
 |
|
i have been using Gentoo and also this DVB-S2 card for years under Linux be recently i built a new system based on Gentoo and want to install this card but the kernel option which I've used before and seems to be the most documented one for this card doesn't seem to be be available any longer.
Does anyone know if this has been supper seed or support dropped for this.
CONFIG_VIDEO_CX88_DVB
the card is an Hauppauge WinTV-NOVA-HD-S2
| Quote: |
11:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
11:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
11:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
11:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
|
Last edited by Rooney on Wed May 15, 2013 12:08 pm; edited 1 time in total |
|
| Back to top |
|
 |
Randy Andy
Veteran
Joined: 19 Jun 2007
Posts: 1148
Location: /dev/koelsch
|
| Posted: Tue May 14, 2013 1:00 pm Post subject: |
|
|
Hi Rooney.
AFAIR there were some movement into the kernel.config file some time ago, but I'm pretty sure it wasn't dropped.
So please let us know what exact kernel version(s) do you speak about.
Then I would check my kernel.config of my VDR box, when I'm later at home an give you a hint afterwards, cause one of my 4 TV cards, is the same as yours.
If you are in hurry, did you try to find it with the search function of nconfig/menuconfig/xconfig searching for CX88_DVB?
Best regards, Andy.
_________________
If you want to see a Distro done right, compile it yourself! |
|
| Back to top |
|
|
Randy Andy
Veteran
Joined: 19 Jun 2007
Posts: 1148
Location: /dev/koelsch
|
| Posted: Tue May 14, 2013 5:25 pm Post subject: |
|
|
Now Rooney,
back on my VDR box which is actually using kernel 3.8.4 you could find the relevant entry here :
Device Drivers --->
Multimedia support --->
Media PCI Adapters --->
DVB/ATSC Support for cx2388x based TV cards (and more as below).
I use this modules:
zgrep CX88 /proc/config.gz
| Code: | CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m |
Belonging Hardware for listed modules above, not exactly the same as yours, but should work nonetheless:
| Code: | 00:0d.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Kernel driver in use: cx8800
00:0d.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Kernel driver in use: cx88_audio
00:0d.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Kernel driver in use: cx88-mpeg driver manager
00:0d.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202 |
Hope this may help you out..
Regards, Andy.
_________________
If you want to see a Distro done right, compile it yourself! |
|
| Back to top |
|
|
Rooney
Apprentice
Joined: 07 Aug 2003
Posts: 193
Location: Sheffield, UK
|
| Posted: Wed May 15, 2013 11:20 am Post subject: |
|
|
| Randy Andy wrote: | Now Rooney,
back on my VDR box which is actually using kernel 3.8.4 you could find the relevant entry here :
Device Drivers --->
Multimedia support --->
Media PCI Adapters --->
DVB/ATSC Support for cx2388x based TV cards (and more as below).
I use this modules:
zgrep CX88 /proc/config.gz
| Code: | CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m |
Belonging Hardware for listed modules above, not exactly the same as yours, but should work nonetheless:
| Code: | 00:0d.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Kernel driver in use: cx8800
00:0d.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Kernel driver in use: cx88_audio
00:0d.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202
Kernel driver in use: cx88-mpeg driver manager
00:0d.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Device 9202 |
Hope this may help you out..
Regards, Andy. |
Just checked mine which was Kernel 3.4.9 but i upgraded to 3.7.10 in an attempt to fix this issues.
i did a search which returned the same as you.
│ Symbol: VIDEO_CX88_DVB [=n] │
│ Type : tristate │
│ Prompt: DVB/ATSC Support for cx2388x based TV cards │
│ Defined at drivers/media/pci/cx88/Kconfig:45 │
│ Depends on: MEDIA_SUPPORT [=y] && MEDIA_PCI_SUPPORT [=y] && (MEDIA_AN │
│ Location: │
│ -> Device Drivers │
│ -> Multimedia support (MEDIA_SUPPORT [=y]) │
│ (2) -> Media PCI Adapters (MEDIA_PCI_SUPPORT [=y]) │
│ -> Conexant 2388x (bt878 successor) support (VIDEO_CX88 [=n]) │
│ Selects: VIDEOBUF_DVB [=n] && DVB_PLL [=n] && DVB_MT352 [=n] && DVB_Z │
but as you can see below im missing Conexant 2388x (bt878 successor) support
│ │ --- Media PCI Adapters │ │
│ │ *** Media capture support *** │ │
│ │ *** Media capture/analog TV support *** │ │
│ │ < > Zoran ZR36057/36067 Video For Linux │ │
│ │ < > Hexium Gemini frame grabber │ │
│ │ < > Hexium HV-PCI6 and Orion frame grabber │ │
│ │ < > Siemens-Nixdorf 'Multimedia eXtension Board' │ │
│ │ *** Media capture/analog/hybrid TV support *** │ │
│ │ < > Philips SAA7134 support │ │
│ │ < > NXP SAA7164 support │ │
│ │ *** Media digital TV PCI Adapters *** │ │
│ │ < > AV7110 cards │ │
│ │ < > SAA7146 DVB cards (aka Budget, Nova-PCI) │ │
│ │ < > Technisat/B2C2 Air/Sky/Cable2PC PCI │ │
│ │ < > Pluto2 cards │ │
│ │ < > PT1 cards │ │
│ │ < > Micronas nGene support │ │
│ │ < > Digital Devices bridge support │ │ |
|
| Back to top |
|
|
Rooney
Apprentice
Joined: 07 Aug 2003
Posts: 193
Location: Sheffield, UK
|
| Posted: Wed May 15, 2013 12:08 pm Post subject: |
|
|
| turns out that all i need to do was add "Remote Controller support" under Multimedia and the conextant option appeared |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
