View previous topic :: View next topic |
Author |
Message |
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Tue May 07, 2013 2:17 pm Post subject: what modules required in kernel for wlan[solved rtl8723ae] |
|
|
i use toshiba sattelite C855D-S5232 laptop.
recently i ad to change my rouer-modem due to modems power supply failure.
bought a new power supply but it does not work with the modem beetel 220BXI ADSL2+
now i bought beetel 450 tc2 . t has 4 port ethernet ports and wlan.
i want to make use of wifi
what kernel modules needed to make wlan connection?
any help appreaciated _________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name)
Last edited by padoor on Sat May 18, 2013 2:57 pm; edited 1 time in total |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9709 Location: almost Mile High in the USA
|
Posted: Tue May 07, 2013 4:38 pm Post subject: |
|
|
Need your lspci information, or lsusb if your wifi is connected via USB, to get what kind of wifi adapter you have
So you never got your wifi working before? Just curious if it was something broke versus a new setup...
http://us.toshiba.com/computers/laptops/satellite/C850/C855D-S5232/ _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Tue May 07, 2013 5:26 pm Post subject: |
|
|
Code: | gentoo@Gentoo-11 ~ $ sudo su
Gentoo-11 gentoo # lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: ATI Technologies Inc Device 9809
00:01.1 Audio device: ATI Technologies Inc Wrestler HDMI Audio [Radeon HD 6250/6310]
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode]
00:12.0 USB Controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:12.2 USB Controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:13.0 USB Controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:13.2 USB Controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices [AMD] Hudson SD Flash Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0
00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1
00:16.0 USB Controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11)
00:16.2 USB Controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8723
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Gentoo-11 gentoo # |
i did not have a wireless modem before. i was using desktop with wired internet.
as i changed the modem i got one with wifi also.
it is not becuse brken configuration. but new wfi try on my new laptop. _________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9709 Location: almost Mile High in the USA
|
Posted: Tue May 07, 2013 7:13 pm Post subject: |
|
|
lspci wrote: | 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8723 |
This is your wifi adapter. Apparently this is fairly new and from a cursory search, this is first supported built-in, in Linux-3.8.
Apparently rtlwifi works with this device, but it might need the rtl819x module...
I think the other default settings for wifi works or it will pull in the right ones automatically, you should try it and see what it does, there's a whole bunch of dependencies (80211 stuff) that tend to be pulled in correctly.
You probably need to also emerge the linux-firmware package as well. _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Fri May 17, 2013 5:31 pm Post subject: |
|
|
i have tried with 3.8.3 and 3.9.0 kernels with rtl8723ae module compiled in the kernel
driver loads ok but no wlan0
both fails to make wlan0 device
how can i trouble shoot this problem?
Code: | dhcppc0 ramaswamy # modinfo rtl8723ae
filename: /lib/modules/3.8.3-gentoo/kernel/drivers/net/wireless/rtlwifi/rtl8723ae/rtl8723ae.ko
firmware: rtlwifi/rtl8723aefw_B.bin
firmware: rtlwifi/rtl8723aefw.bin
description: Realtek 8723E 802.11n PCI wireless
license: GPL
author: Larry Finger <Larry.Finger@lwfinger.net>
author: Realtek WlanFAE <wlanfae@realtek.com>
author: lizhaoming <chaoming_li@realsil.com.cn>
alias: pci:v000010ECd00008723sv*sd*bc*sc*i*
depends: rtlwifi
intree: Y
vermagic: 3.8.3-gentoo SMP mod_unload K8
parm: swenc:Set to 1 for software crypto (default 0)
(bool)
parm: ips:Set to 0 to not use link power save (default 1)
(bool)
parm: swlps:Set to 1 to use SW control power save (default 0)
(bool)
parm: fwlps:Set to 1 to use FW control power save (default 1)
(bool)
parm: debug:Set debug level (0-5) (default 0) (int)
dhcppc0 ramaswamy # |
it seems it is default not on
how or where i configure this driver ? _________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9709 Location: almost Mile High in the USA
|
Posted: Fri May 17, 2013 6:09 pm Post subject: |
|
|
most of the wifi drivers I've seen at least would detect the HW without config, whether or not it works is another problem.
So when the module is modprobed, what does it report in dmesg? Is it completely "hardware not found" (wrong driver?) _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Sat May 18, 2013 11:23 am Post subject: |
|
|
Code: | 8.038131] [drm] Driver supports precise vblank timestamp query.
[ 8.038142] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[ 8.038211] radeon 0000:00:01.0: irq 42 for MSI/MSI-X
[ 8.038233] radeon 0000:00:01.0: radeon: using MSI.
8.713016] rtlwifi: Firmware rtlwifi/rtl8723fw_B.bin not available
[ 8.793589] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
[ 8.793925] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.795354] sd 2:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 8.796460] sd 2:0:0:0: [sdb] Write Protect is off
[ 8.796469] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 8.798208] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 8.803451] sdb: sdb1
[ 8.806691] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.198273] Console: switching to colour frame buffer device 170x48
[ 9.207982] radeon 0000:00:01.0: fb0: radeon |
the above is from dmesg
it is looking for rtl8723fw_bin
modprobe rtl8723ae has no complaint.
what do i do now _________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Sat May 18, 2013 12:05 pm Post subject: |
|
|
made some progress
i copied the rtlwifi folder from downloaded linux-firmware
and now get
Code: | dhcppc0 ramaswamy # ifconfig wlan0 up
dhcppc0 ramaswamy # iwconfig
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
sit0 no wireless extensions.
lo no wireless extensions.
eth0 no wireless extensions.
dhcppc0 ramaswamy # |
what further can be done to configure wlan0 ? _________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9709 Location: almost Mile High in the USA
|
Posted: Sat May 18, 2013 1:50 pm Post subject: |
|
|
Looks like you're most of the way there.
Now you need to know how you configured your access point (WEP, WPA, etc.)
At this point the path diverges depending on how you want to configure it... I took the easy way out as my wireless clients are laptops and they have GNOME installed, so networkmanager and its GUI nm-applet made it very easy to configure. I've heard wicd works well too for non-GNOME/KDE installs.
If you don't have encryption turned on (not recommended!) all you would need to do is
iwconfig wlan0 essid <your ssid>
and things should start working (IIRC.) You should be able to run DHCP at this point.
WEP is not too much more (also not recommended)
iwconfig wlan0 key 0 <your-wep-key>
Likely you're using WPA/WPA2 and you need to use wpa-supplicant which I haven't used directly before -- networkmanager dealt with it automatically... _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Sat May 18, 2013 2:21 pm Post subject: |
|
|
thanks for your reply above eccerr0r
i emerge wicd and it promptly scanned and found my modem wifi among others
soon i put in the psk password it connected.
thanks for a replies
_________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
666threesixes666 Veteran
Joined: 31 May 2011 Posts: 1248 Location: 42.68n 85.41w
|
Posted: Sat May 18, 2013 2:25 pm Post subject: |
|
|
glad to see your on the right track.... id advise against using wicd as your primary connection method. it works, though networkmanager's had more consistent solid performance for me. |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Sat May 18, 2013 2:29 pm Post subject: |
|
|
i will try the networkmanager too
i have gnome installed.
this is 64bit version of gentoo on amd64
thanks very much 666threesixes666
_________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
padoor Advocate
Joined: 30 Dec 2005 Posts: 4185 Location: india
|
Posted: Sat May 18, 2013 2:31 pm Post subject: |
|
|
i will try the networkmanager too
i have gnome installed.
this is 64bit version of gentoo on amd64
thanks very much 666threesixes666
_________________ reach out a little bit more to catch it (DON'T BELIEVE the advocate part under my user name) |
|
Back to top |
|
|
666threesixes666 Veteran
Joined: 31 May 2011 Posts: 1248 Location: 42.68n 85.41w
|
Posted: Sat May 18, 2013 2:34 pm Post subject: |
|
|
merge nm-applet to manipulate network manager through the gui. (networkmanager might pull it in) id follow the wiki to install it....
http://wiki.gentoo.org/wiki/NetworkManager |
|
Back to top |
|
|
eccerr0r Watchman
Joined: 01 Jul 2004 Posts: 9709 Location: almost Mile High in the USA
|
Posted: Sat May 18, 2013 2:36 pm Post subject: |
|
|
Yes, if you're using Gnome you should be using networkmanager. The nice thing about it is that it's very well integrated with dbus so networkmanager can signal network features as it goes up and down - it's very slick. Props to Redhat for writing this. _________________ Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching? |
|
Back to top |
|
|
|