Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[risolto] Card reader non funzionante dopo aggior. kernel
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
pingoo
Guru
Guru


Joined: 11 Jul 2006
Posts: 324

PostPosted: Thu Apr 25, 2013 2:59 pm    Post subject: [risolto] Card reader non funzionante dopo aggior. kernel Reply with quote

Ho aggiornato il kernel passando dal 3.4.9 al 3.8.6 utilizzando, anche se non è consigliato, il vecchio file di configurazione. Quando inserisco una scheda nell'apposito lettore non succede nulla col kernel più recente mentre continua a funzionare correttamente col kernel vecchio.
Ho provato ad indagare e modificare la configurazione del nuovo kernel, in particolare attivando alcune opzioni che prima non c'erano (tra le quali CONFIG_MMC_REALTEK_PCI=Y) ma non è cambiato nulla e dmesg non da segnali sull'avvenuto inserimento della scheda.
Code:
lspci
03:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)

Qualche idea?


Last edited by pingoo on Fri Apr 26, 2013 9:43 pm; edited 1 time in total
Back to top
View user's profile Send private message
fbcyborg
Advocate
Advocate


Joined: 16 Oct 2005
Posts: 3056
Location: ROMA

PostPosted: Fri Apr 26, 2013 7:44 pm    Post subject: Reply with quote

Ciao,

è successo anche a me. A quanto pare è un bug del kernel.
_________________
[HOWTO] Come criptare la /home usando cryptsetup e luks
[HOWTO] Abilitare il supporto al dom0 XEN su kernel 3.X
Help answer the unanswered
Back to top
View user's profile Send private message
pingoo
Guru
Guru


Joined: 11 Jul 2006
Posts: 324

PostPosted: Fri Apr 26, 2013 9:42 pm    Post subject: Reply with quote

Ottimo, risolto installando il 3.8.8, grazie! Ora devo solo ricordare quanto ho sporcato il file di configurazione...
Back to top
View user's profile Send private message
fbcyborg
Advocate
Advocate


Joined: 16 Oct 2005
Posts: 3056
Location: ROMA

PostPosted: Sat Apr 27, 2013 7:26 am    Post subject: Reply with quote

A me continua a non funzionare una cippa... :x

Ho anche seguito questo wiki, specialmente l'ultimo paragrafo.
_________________
[HOWTO] Come criptare la /home usando cryptsetup e luks
[HOWTO] Abilitare il supporto al dom0 XEN su kernel 3.X
Help answer the unanswered
Back to top
View user's profile Send private message
pierino_89
Guru
Guru


Joined: 03 Oct 2009
Posts: 522

PostPosted: Sat Apr 27, 2013 11:33 pm    Post subject: Reply with quote

A me funzionava con il modulo rts_pstor, da quando l'hanno rimosso niente da fare.
Pensavo di attendere il 3.9 (dato che FINALMENTE dovrebbe risolvere anche i miei problemi di scheda audio), ma visto che ci siamo, cosa avete tentato?
Io ho aggiunto il nuovo modulo, ma a parte questo schifo nell'output di lspci non ho ottenuto nulla:
Code:
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)

_________________
Linux registered user 461710
Back to top
View user's profile Send private message
fbcyborg
Advocate
Advocate


Joined: 16 Oct 2005
Posts: 3056
Location: ROMA

PostPosted: Sun Apr 28, 2013 9:29 am    Post subject: Reply with quote

Boh, sinceramente non riesco più a capire se è colpa mia che non ho configurato bene il kernel oppure no.
In particolare ho abilitato i seguenti moduli del kernel (riabilitati, visto che prima erano attivi e poi sono stati disattivati ad un upgrade del kernel):
Code:
Device Drivers  --->
   <*> MMC/SD/SDIO card support  --->
      <*>   MMC block device driver
      (8)     Number of minors per block device
      [*]     Use bounce buffer for simple hosts
      <*>   Secure Digital Host Controller Interface support
   SCSI device support  --->
      [*] Probe all LUNs on each SCSI device


Inoltre, se inserisco una scheda di memoria nel ringbuffer non leggo assolutamente niente!!!

Credo anche io che la mancanza di rts_pstor sia la causa del fatto che non funzioni più nulla!

EDIT:
ho anche abilitato il seguente modulo ma nulla di fatto
Code:
Device Drivers  --->
   Multifunction device drivers  --->
      <*> Support for Realtek PCI-E card reader


Riferimento.
_________________
[HOWTO] Come criptare la /home usando cryptsetup e luks
[HOWTO] Abilitare il supporto al dom0 XEN su kernel 3.X
Help answer the unanswered
Back to top
View user's profile Send private message
pierino_89
Guru
Guru


Joined: 03 Oct 2009
Posts: 522

PostPosted: Tue Apr 30, 2013 5:08 pm    Post subject: Reply with quote

Ho appena installato il 3.9 e il problema sembra risolto.
_________________
Linux registered user 461710
Back to top
View user's profile Send private message
fbcyborg
Advocate
Advocate


Joined: 16 Oct 2005
Posts: 3056
Location: ROMA

PostPosted: Sat May 04, 2013 2:55 pm    Post subject: Reply with quote

Appena installato il kernel 3.9.0 e non sembra risolto ancora nulla. :(

pierino_89: puoi aiutarmi a capire se mi manca qualcosa nella conf del kernel?
_________________
[HOWTO] Come criptare la /home usando cryptsetup e luks
[HOWTO] Abilitare il supporto al dom0 XEN su kernel 3.X
Help answer the unanswered
Back to top
View user's profile Send private message
pierino_89
Guru
Guru


Joined: 03 Oct 2009
Posts: 522

PostPosted: Sat May 04, 2013 3:15 pm    Post subject: Reply with quote

Uhm, se cerco realtek vedo questi:

CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_PCI=m

ma immagino che tu li abbia già abilitati tutti.
_________________
Linux registered user 461710
Back to top
View user's profile Send private message
fbcyborg
Advocate
Advocate


Joined: 16 Oct 2005
Posts: 3056
Location: ROMA

PostPosted: Sat May 04, 2013 5:37 pm    Post subject: Reply with quote

Ciao,

a dire la verità non erano tutti compilati, anzi ecco com'era la situazione prima:
Code:
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_REALTEK_PHY is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_MMC_REALTEK_PCI is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set


Mentre ora la situazione è:
Code:
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_REALTEK_PHY is not set
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_MMC_REALTEK_PCI=y
CONFIG_MEMSTICK_REALTEK_PCI=y


Comunque ancora non funziona.

Quando inserisco una scheda di memoria compare questo.
Eppure la scheda di memoria non ha problemi e ne ho provata anche un'altra.
_________________
[HOWTO] Come criptare la /home usando cryptsetup e luks
[HOWTO] Abilitare il supporto al dom0 XEN su kernel 3.X
Help answer the unanswered
Back to top
View user's profile Send private message
pierino_89
Guru
Guru


Joined: 03 Oct 2009
Posts: 522

PostPosted: Sun May 05, 2013 1:33 am    Post subject: Reply with quote

Prova a compilarli come modulo. Anche il driver generico (CONFIG_MMC_SDHCI).
_________________
Linux registered user 461710
Back to top
View user's profile Send private message
fbcyborg
Advocate
Advocate


Joined: 16 Oct 2005
Posts: 3056
Location: ROMA

PostPosted: Sun May 05, 2013 9:58 am    Post subject: Reply with quote

Niente da fare.

:cry:

Ottengo sempre lo stesso risultato.
_________________
[HOWTO] Come criptare la /home usando cryptsetup e luks
[HOWTO] Abilitare il supporto al dom0 XEN su kernel 3.X
Help answer the unanswered
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum