View previous topic :: View next topic |
Author |
Message |
nobody13 Apprentice
Joined: 21 Jan 2006 Posts: 190
|
Posted: Fri Apr 05, 2013 2:28 pm Post subject: resource conflicts? |
|
|
Hi, I found some driver conflicts after updating to udev-200 and have no idea what to do about them. One looks like my network adapter. The last one looks like something intel ( i thought I was using the acpi drivers for that) This might have nothing to do with the update, I just noticed it when I was looking to see what my network adapter got renamed to . PLease help!
#dmesg
Code: | 6.707874] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20120711/utaddress-251)
[ 6.707880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.819054] systemd-udevd[1235]: renamed network interface eth0 to enp2s0
[ 7.025230] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20120711/utaddress-251)
[ 7.025238] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.025241] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20120711/utaddress-251)
[ 7.025246] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.025248] lpc_ich: Resource conflict(s) found affecting gpio_ich
|
if it helps: lspci -v
Code: | 02:00.0 Ethernet controller: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
Subsystem: ASUSTeK Computer Inc. Device 8226
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at dc00 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [180] Device Serial Number ff-08-37-ba-00-23-54-ff
Kernel driver in use: ATL1E
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
|
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Fri Apr 05, 2013 5:34 pm Post subject: |
|
|
should produce nic names
will tell you what to do to retain kernel nic names
_________________ Defund the FCC. |
|
Back to top |
|
|
nobody13 Apprentice
Joined: 21 Jan 2006 Posts: 190
|
Posted: Tue Apr 16, 2013 6:09 pm Post subject: |
|
|
Thanks for the reply and sorry I took so long to answer. I did follow the guide in the news when i updated udev.
The second bug you listed seems to have a patch included with newer kernels. I'll try that tonight.
Code: | intel-desk dave # ifconfig -a
dummy0: flags=130<BROADCAST,NOARP> mtu 1500
ether ee:f4:35:2a:55:8f txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.134 netmask 255.255.255.0 broadcast 192.168.2.255
ether 00:23:54:08:37:ba txqueuelen 1000 (Ethernet)
RX packets 245226 bytes 352018621 (335.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 136349 bytes 11329978 (10.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 2 collisions 0
firewire0: flags=4098<BROADCAST,MULTICAST> mtu 1500
unspec 00-1E-8C-00-01-81-4F-91-00-00-00-00-00-00-00-00 txqueuelen 20 (UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 4 bytes 280 (280.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 280 (280.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 |
|
|
Back to top |
|
|
nobody13 Apprentice
Joined: 21 Jan 2006 Posts: 190
|
Posted: Sun Apr 21, 2013 3:09 am Post subject: |
|
|
updated kernel to 3.7.10 and no change.
dmesg:
Code: | systemd-udevd[1214]: starting version 200
[ 7.125319] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20120913/utaddress-251)
[ 7.125325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.142051] systemd-udevd[1239]: renamed network interface eth0 to enp2s0
[ 7.197611] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20120913/utaddress-251)
[ 7.197617] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.197621] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 1 (20120913/utaddress-251)
[ 7.197624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.197625] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 1 (20120913/utaddress-251)
[ 7.197629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.197630] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.290799] md: bind<sdc>
[ 7.292757] md: bind<sdb>
[ 7.383916] md/raid1:md127: active with 2 out of 2 mirrors
[ 7.383930] md127: detected capacity change from 0 to 500107771904
[ 7.483330] md127: p1 p2
[ 7.489470] nvidia: module license 'NVIDIA' taints kernel.
[ 7.489473] Disabling lock debugging due to kernel taint
[ 7.499930] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.500049] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.30 Wed Mar 27 16:56:45 PDT 2013
[ 8.585066] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 8.835144] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.835201] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.835249] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.835294] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.835341] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.835386] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.835432] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.835477] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.835681] hda_intel: Disabling MSI
[ 9.376080] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 9.376162] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 9.376210] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 9.376249] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 9.731297] nvidia-smi (1279) used greatest stack depth: 4616 bytes left
[ 10.379425] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 10.480417] mount (1387) used greatest stack depth: 4600 bytes left
[ 10.604877] Adding 8388604k swap on /dev/sda5. Priority:-1 extents:1 across:8388604k
[ 10.625156] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 10.627925] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 10.729714] fuse init (API version 7.20)
[ 14.107270] ATL1E 0000:02:00.0: irq 46 for MSI/MSI-X
[ 14.107389] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <1000 Mbps Full Duplex>
[ 57.568492] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 5035.584025] flush-8:0 (2010) used greatest stack depth: 4104 bytes left |
It looks like one of the conflicts is my network card but it appears to work fine.
Can lpc_ich or gpio_ich have something to do with my smbus not having a driver loaded?
Code: | *-serial UNCLAIMED
description: SMBus
product: 82801JI (ICH10 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 00
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:fbfff400-fbfff4ff ioport:400(size=32) |
|
|
Back to top |
|
|
nobody13 Apprentice
Joined: 21 Jan 2006 Posts: 190
|
Posted: Mon Apr 22, 2013 12:51 am Post subject: |
|
|
I got rid of 3 of the warnings by changing kernel options. How do I tell if this error is from my network drivers or something else?
Code: | 5.343738] systemd-udevd[1216]: starting version 200
[ 6.080241] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20120913/utaddress-251)
[ 6.080247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.230056] systemd-udevd[1235]: renamed network interface eth0 to enp2s0
[ 6.332211] md: bind<sdb>
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|