Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
eix-sync/update stuck processing bgo-overlay
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Portage & Programming
View previous topic :: View next topic  
Author Message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Fri Mar 22, 2013 8:32 pm    Post subject: eix-sync/update stuck processing bgo-overlay Reply with quote

Hi,

Just recently I added an outside overlay - bgo-overlay. Adding using layman command works successfully. However, when I run eix-update, every time process gets stuck as shown below.

Code:
eix-update
Reading Portage settings ..
Building database (/var/cache/eix/portage.eix) ..
[0] "gentoo" /usr/portage/ (cache: metadata-md5-or-flat)
     Reading category 160|160 (100%) Finished             
[1] "lxde" /var/lib/layman/lxde (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished     
[2] "portage-backup" /var/lib/layman/portage-backup (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished     
[3] "cj-overlay" /var/lib/layman/cj-overlay (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished             
[4] "bleeding-edge" /var/lib/layman/bleeding-edge (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished           
[5] "sunrise" /var/lib/layman/sunrise (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished             
[6] "mozilla" /var/lib/layman/mozilla (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished       
[7] "bgo-overlay" /var/lib/layman/bgo-overlay (cache: parse|ebuild*#metadata-md5#metadata-flat#assign)
     Reading category   4|160 (  2%): app-arch .. * ERROR: app-arch/peazip-1.8.2 failed (depend phase):
 *   kde-functions.eclass could not be found by inherit()
 *
 * Call stack:
 *             ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-arch/peazip/peazip-1.8.2.ebuild'
 *   peazip-1.8.2.ebuild, line   5:  Called inherit 'eutils' 'kde-functions'
 *             ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-arch/peazip-1.8.2'`,
 * the complete build log and the output of `emerge -pqv '=app-arch/peazip-1.8.2'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/peazip-1.8.2'

Ebuild failed with status 1
     Reading category   4|160 (  2%): app-arch ..
Could not properly execute /var/lib/layman/bgo-overlay/app-arch/peazip/peazip-1.8.2.ebuild
     Reading category   4|160 (  2%): app-arch .. * ERROR: app-arch/peazip-1.9 failed (depend phase):
 *   kde-functions.eclass could not be found by inherit()
 *
 * Call stack:
 *           ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-arch/peazip/peazip-1.9.ebuild'
 *   peazip-1.9.ebuild, line   5:  Called inherit 'eutils' 'kde-functions'
 *           ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-arch/peazip-1.9'`,
 * the complete build log and the output of `emerge -pqv '=app-arch/peazip-1.9'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/peazip-1.9'

Ebuild failed with status 1
     Reading category   4|160 (  2%): app-arch ..
Could not properly execute /var/lib/layman/bgo-overlay/app-arch/peazip/peazip-1.9.ebuild
     Reading category   4|160 (  2%): app-arch .. * ERROR: app-arch/peazip-2.3a failed (depend phase):
 *   kde-functions.eclass could not be found by inherit()
 *
 * Call stack:
 *            ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-arch/peazip/peazip-2.3a.ebuild'
 *   peazip-2.3a.ebuild, line   5:  Called inherit 'eutils' 'kde-functions'
 *            ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-arch/peazip-2.3a'`,
 * the complete build log and the output of `emerge -pqv '=app-arch/peazip-2.3a'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/peazip-2.3a'

Ebuild failed with status 1
     Reading category   4|160 (  2%): app-arch ..
Could not properly execute /var/lib/layman/bgo-overlay/app-arch/peazip/peazip-2.3a.ebuild
     Reading category   9|160 (  5%): app-dicts .. * ERROR: app-dicts/kydpdict-0.6.4 failed (depend phase):
 *   kde.eclass could not be found by inherit()
 *
 * Call stack:
 *               ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.6.4.ebuild'
 *   kydpdict-0.6.4.ebuild, line   5:  Called inherit 'kde'
 *               ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-dicts/kydpdict-0.6.4'`,
 * the complete build log and the output of `emerge -pqv '=app-dicts/kydpdict-0.6.4'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kydpdict-0.6.4'

Ebuild failed with status 1
     Reading category   9|160 (  5%): app-dicts ..
Could not properly execute /var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.6.4.ebuild
     Reading category   9|160 (  5%): app-dicts .. * ERROR: app-dicts/kydpdict-0.9.0 failed (depend phase):
 *   kde.eclass could not be found by inherit()
 *
 * Call stack:
 *               ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.9.0.ebuild'
 *   kydpdict-0.9.0.ebuild, line   7:  Called inherit 'kde'
 *               ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-dicts/kydpdict-0.9.0'`,
 * the complete build log and the output of `emerge -pqv '=app-dicts/kydpdict-0.9.0'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kydpdict-0.9.0'

Ebuild failed with status 1
     Reading category   9|160 (  5%): app-dicts ..
Could not properly execute /var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.9.0.ebuild
     Reading category   9|160 (  5%): app-dicts .. * ERROR: app-dicts/kydpdict-0.9.2 failed (depend phase):
 *   kde.eclass could not be found by inherit()
 *
 * Call stack:
 *               ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.9.2.ebuild'
 *   kydpdict-0.9.2.ebuild, line   7:  Called inherit 'kde'
 *               ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-dicts/kydpdict-0.9.2'`,
 * the complete build log and the output of `emerge -pqv '=app-dicts/kydpdict-0.9.2'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kydpdict-0.9.2'

Ebuild failed with status 1
     Reading category   9|160 (  5%): app-dicts ..
Could not properly execute /var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.9.2.ebuild
     Reading category   9|160 (  5%): app-dicts .. * ERROR: app-dicts/kydpdict-0.9.3 failed (depend phase):
 *   kde.eclass could not be found by inherit()
 *
 * Call stack:
 *               ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.9.3.ebuild'
 *   kydpdict-0.9.3.ebuild, line   7:  Called inherit 'kde'
 *               ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-dicts/kydpdict-0.9.3'`,
 * the complete build log and the output of `emerge -pqv '=app-dicts/kydpdict-0.9.3'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kydpdict-0.9.3'

Ebuild failed with status 1
     Reading category   9|160 (  5%): app-dicts ..
Could not properly execute /var/lib/layman/bgo-overlay/app-dicts/kydpdict/kydpdict-0.9.3.ebuild
     Reading category  11|160 (  6%): app-editors .. * ERROR: app-editors/kompozer-0.8_alpha4 failed (depend phase):
 *   mozconfig.eclass could not be found by inherit()
 *
 * Call stack:
 *                    ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-editors/kompozer/kompozer-0.8_alpha4.ebuild'
 *   kompozer-0.8_alpha4.ebuild, line   1:  Called inherit 'eutils' 'mozconfig' 'flag-o-matic' 'multilib'
 *                    ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-editors/kompozer-0.8_alpha4'`,
 * the complete build log and the output of `emerge -pqv '=app-editors/kompozer-0.8_alpha4'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kompozer-0.8_alpha4'

Ebuild failed with status 1
     Reading category  11|160 (  6%): app-editors ..
Could not properly execute /var/lib/layman/bgo-overlay/app-editors/kompozer/kompozer-0.8_alpha4.ebuild
     Reading category  11|160 (  6%): app-editors .. * ERROR: app-editors/kompozer-0.8_beta1 failed (depend phase):
 *   mozconfig.eclass could not be found by inherit()
 *
 * Call stack:
 *                   ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-editors/kompozer/kompozer-0.8_beta1.ebuild'
 *   kompozer-0.8_beta1.ebuild, line   5:  Called inherit 'eutils' 'mozconfig' 'flag-o-matic' 'multilib'
 *                   ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-editors/kompozer-0.8_beta1'`,
 * the complete build log and the output of `emerge -pqv '=app-editors/kompozer-0.8_beta1'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kompozer-0.8_beta1'

Ebuild failed with status 1
     Reading category  11|160 (  6%): app-editors ..
Could not properly execute /var/lib/layman/bgo-overlay/app-editors/kompozer/kompozer-0.8_beta1.ebuild
     Reading category  11|160 (  6%): app-editors .. * ERROR: app-editors/kompozer-0.8_beta2 failed (depend phase):
 *   mozconfig-2.eclass could not be found by inherit()
 *
 * Call stack:
 *                   ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-editors/kompozer/kompozer-0.8_beta2.ebuild'
 *   kompozer-0.8_beta2.ebuild, line   6:  Called inherit 'eutils' 'mozconfig-2' 'flag-o-matic' 'toolchain-funcs' 'mozilla-launcher' 'makeedit' 'multilib' 'mozextension' 'fdo-mime' 'autotools'
 *                   ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-editors/kompozer-0.8_beta2'`,
 * the complete build log and the output of `emerge -pqv '=app-editors/kompozer-0.8_beta2'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/kompozer-0.8_beta2'

Ebuild failed with status 1
     Reading category  11|160 (  6%): app-editors ..
Could not properly execute /var/lib/layman/bgo-overlay/app-editors/kompozer/kompozer-0.8_beta2.ebuild
     Reading category  13|160 (  8%): app-emulation ..
Can't split filename of ebuild /var/lib/layman/bgo-overlay/app-emulation/faumachine/faumachine-VERSION.ebuild
     Reading category  14|160 (  8%): app-forensics .. *
 * "/var/lib/layman/bgo-overlay/app-forensics/yim2text/yim2text-0.1.0.ebuild":
 * Deprecation Warning: Usage of distutils.eclass in packages not supporting installation
 * for multiple Python ABIs in EAPI <=2 is deprecated.
 * The ebuild should to be fixed. Please report a bug, if it has not been already reported.
 *
/var/lib/layman/bgo-overlay/app-forensics/yim2text/yim2text-0.1.0.ebuild: line 24: doman: command not found
 * ERROR: app-forensics/yim2text-0.1.0 failed (depend phase):
 *   error sourcing ebuild
 *
 * Call stack:
 *   ebuild.sh, line 551:  Called die
 * The specific snippet of code:
 *            source "$EBUILD" || die "error sourcing ebuild"
 *
 * If you need support, post the output of `emerge --info '=app-forensics/yim2text-0.1.0'`,
 * the complete build log and the output of `emerge -pqv '=app-forensics/yim2text-0.1.0'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/yim2text-0.1.0'

Ebuild failed with status 1
     Reading category  14|160 (  8%): app-forensics ..
Could not properly execute /var/lib/layman/bgo-overlay/app-forensics/yim2text/yim2text-0.1.0.ebuild
     Reading category  16|160 ( 10%): app-laptop .. * ERROR: app-laptop/hotswap-0.5.0 failed (depend phase):
 *   kde.eclass could not be found by inherit()
 *
 * Call stack:
 *              ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-laptop/hotswap/hotswap-0.5.0.ebuild'
 *   hotswap-0.5.0.ebuild, line   6:  Called inherit 'kde'
 *              ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-laptop/hotswap-0.5.0'`,
 * the complete build log and the output of `emerge -pqv '=app-laptop/hotswap-0.5.0'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/hotswap-0.5.0'

Ebuild failed with status 1
     Reading category  16|160 ( 10%): app-laptop ..
Could not properly execute /var/lib/layman/bgo-overlay/app-laptop/hotswap/hotswap-0.5.0.ebuild
     Reading category  18|160 ( 11%): app-misc .. * ERROR: app-misc/bsc-2.26 failed (depend phase):
 *   qt3.eclass could not be found by inherit()
 *
 * Call stack:
 *         ebuild.sh, line 551:  Called source '/var/lib/layman/bgo-overlay/app-misc/bsc/bsc-2.26.ebuild'
 *   bsc-2.26.ebuild, line   5:  Called inherit 'eutils' 'qt3'
 *         ebuild.sh, line 261:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=app-misc/bsc-2.26'`,
 * the complete build log and the output of `emerge -pqv '=app-misc/bsc-2.26'`.
 * This ebuild is from an overlay: '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/bsc-2.26'

Ebuild failed with status 1
     Reading category  18|160 ( 11%): app-misc ..
Could not properly execute /var/lib/layman/bgo-overlay/app-misc/bsc/bsc-2.26.ebuild
     Reading category  18|160 ( 11%): app-misc ..


Code:
 emerge --info
Portage 2.1.11.55 (default/linux/amd64/13.0, gcc-4.5.4, glibc-2.15-r3, 3.7.9-gentoo x86_64)
=================================================================
System uname: Linux-3.7.9-gentoo-x86_64-Intel-R-_Core-TM-_i7_CPU_860_@_2.80GHz-with-gentoo-2.1
KiB Mem:     3975016 total,    597552 free
KiB Swap:     987960 total,    727748 free
Timestamp of tree: Fri, 22 Mar 2013 16:45:01 +0000
ld GNU ld (GNU Binutils) 2.22
ccache version 3.1.9 [enabled]
app-shells/bash:          4.2_p37
dev-java/java-config:     2.1.12-r1
dev-lang/python:          2.5.4-r5, 2.7.3-r3, 3.1.5, 3.2.3-r2
dev-util/ccache:          3.1.9
dev-util/cmake:           2.8.9
dev-util/pkgconfig:       0.28
sys-apps/baselayout:      2.1-r1
sys-apps/openrc:          9999
sys-apps/sandbox:         2.5
sys-devel/autoconf:       2.13, 2.69
sys-devel/automake:       1.9.6-r3, 1.10.3, 1.11.6
sys-devel/binutils:       2.22-r1
sys-devel/gcc:            4.4.7, 4.5.4, 4.6.3
sys-devel/gcc-config:     1.7.3
sys-devel/libtool:        2.4-r1
sys-devel/make:           3.82-r4
sys-kernel/linux-headers: 3.6 (virtual/os-headers)
sys-libs/glibc:           2.15-r3
Repositories: gentoo lxde portage-backup cj-overlay bleeding-edge sunrise mozilla bgo-overlay local
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -march=native -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt /usr/share/maven-bin-2.2/conf /usr/share/maven-bin-3.0/conf /var/lib/hsqldb /var/spool/munin-async/.ssh"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5.3/ext-active/ /etc/php/apache2-php5.4/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/cgi-php5.4/ext-active/ /etc/php/cli-php5.3/ext-active/ /etc/php/cli-php5.4/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/splash /etc/terminfo"
CXXFLAGS="-O2 -march=native -pipe"
DISTDIR="/usr/portage/distfiles"
EMERGE_DEFAULT_OPTS="--autounmask=n"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs ccache config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://mirror.mcs.anl.gov/pub/gentoo/ rsync://mirror.mcs.anl.gov/gentoo/ ftp://mirror.mcs.anl.gov/pub/gentoo/ ftp://gentoo.mirrors.tds.net/gentoo rsync://gentoo.mirrors.tds.net/gentoo http://gentoo.mirrors.tds.net/gentoo"
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j8 -l8"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_EXTRA_OPTS="--timeout=50"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/nfs1/var/tmp/portage"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/var/lib/layman/lxde /var/lib/layman/portage-backup /var/lib/layman/cj-overlay /var/lib/layman/bleeding-edge /var/lib/layman/sunrise /var/lib/layman/mozilla /var/lib/layman/bgo-overlay /usr/local/portage"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="X acl alsa amd64 aspell berkdb bzip2 cli consolekit cracklib crypt cxx dbus dri gdbm gpm gstreamer gtk hal iconv ipv6 jpeg ldap mmx modules mudflap multilib ncurses nls nptl nptlonly nsplugin openmp pam pcre readline session sse sse2 ssl svg tcpd unicode zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias cgi cgid" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" PHP_TARGETS="php5-3" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_2" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" VIDEO_CARDS="radeon" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, USE_PYTHON




Wonder if anyone here was able to use bgo-overlay successfully. Any help is appreciated. Thanks.
Back to top
View user's profile Send private message
khayyam
Advocate
Advocate


Joined: 07 Jun 2012
Posts: 2244

PostPosted: Fri Mar 22, 2013 9:21 pm    Post subject: Reply with quote

upengan78 ...

The issue is that ... and I'm sure mv will correct me if I'm wrong ... eix is parsing the metadata and one or other ebuild from the b.g.o overlay is using a nolonger existant, and so obsolete, *.eclass. As the eclass is 'kde-functions.eclass' I assume this is due to the changes to kde recently.

The deeper issue is that b.g.o isn't really an overlay with a maintainer, but autogenerated from whatever ebuilds are added to b.g.o .... so its no doubt more prone to issues of this kind. Your probably best not to use it via layman, but sync to some other part of the filesystem, and filter any ebuild you want to use in PORTDIR_OVERLAY.

best ... khay
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Fri Mar 22, 2013 9:25 pm    Post subject: Reply with quote

Hey,

Thanks for the advise and pin pointing the problem and where it leading. I will follow your suggestion.
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Sat Mar 23, 2013 8:33 pm    Post subject: Reply with quote

The problem is that apparently there is no metadata, so eix is trying to execute the ebuilds to generate them. This in turn fails due to the missing eclass.
It is likely that all these ebuiilds will not emerge.
To generate a vaild metadata you can force eix to only use cache method "parse" (instead of parse|ebuild - please consult the manpage how to do that, I am currently too tired): Then some data (like e.g. slot name) will be missing for these ebuilds, but at least you can see them in eix. (OTOH, I suspect that also the parse|ebuild will finish eventually and probably then contains even more accurate information despite the error messages during creation).
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Mon Mar 25, 2013 7:39 pm    Post subject: Reply with quote

Ok. Thanks.

Tried the option to just use parse cache (for overlays)

Code:
OVERLAY_CACHE_METHOD="parse" eix-sync
 * Copying old database to /var/cache/eix/previous.eix
 * Running emerge --sync
>>> Starting rsync with rsync://67.212.64.3/gentoo-portage...
>>> Checking server timestamp ...
Welcome.
This is rsync6.ca.gentoo.org.
This is also { mirror.the-best-hosting.net }
IPV4 : [67.212.64.3]
IPV6 : [2001:470:c0f2:1::20]
This server support IPV4 and IPV6

This is a virtual server running on top of a dual cpu quad core 3ghz vmware server cluster.
If there is any problem with this mirror, you may contact us at: support@the-best-hosting.net
Ask for Patrick Legault and the issue should be resolved shortly after.

Thanks for using our mirror

receiving incremental file list
timestamp.chk

Number of files: 1
Number of files transferred: 1
Total file size: 32 bytes
Total transferred file size: 32 bytes
Literal data: 32 bytes
Matched data: 0 bytes
File list size: 27
File list generation time: 0.001 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 98
Total bytes received: 591

sent 98 bytes  received 591 bytes  459.33 bytes/sec
total size is 32  speedup is 0.05

>>>
>>> Timestamps on the server and in the local repository are the same.
>>> Cancelling all further sync action. You are already up to date.
>>>
>>> In order to force sync, remove '/usr/portage/metadata/timestamp.chk'.
>>>

 * Running eix-update
Reading Portage settings ..
Building database (/var/cache/eix/portage.eix) ..
[0] "gentoo" /usr/portage/ (cache: metadata-md5-or-flat)
     Reading category 160|160 (100%) Finished             
[1] "lxde" /var/lib/layman/lxde (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished     
[2] "portage-backup" /var/lib/layman/portage-backup (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished     
[3] "cj-overlay" /var/lib/layman/cj-overlay (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished             
[4] "bleeding-edge" /var/lib/layman/bleeding-edge (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished           
[5] "sunrise" /var/lib/layman/sunrise (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished             
[6] "mozilla" /var/lib/layman/mozilla (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category 160|160 (100%) Finished       
[7] "bgo-overlay" /var/lib/layman/bgo-overlay (cache: parse#metadata-md5#metadata-flat#assign)
     Reading category  13|160 (  8%): app-emulation ..   
Can't split filename of ebuild /var/lib/layman/bgo-overlay/app-emulation/faumachine/faumachine-VERSION.ebuild
     Reading category  18|160 ( 11%): app-misc ..     <-------stuck
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Tue Mar 26, 2013 10:02 am    Post subject: Reply with quote

I cannot reproduce that here: I just added gpo-overlay and realized that it even has md5 metadata, so OVERLAY_CACHE_METHOD=metadata-md5 works. Due to your (default) setting of CACHE_METHOD_PARSE, eix should be attempting this method before trying to actually parse/execute something else. However, even
Code:
CACHE_METHOD_PARSE= OVERLAY_CACHE_METHOD=parse eix-update
which forces to use cache method parse, does not hang here. Maybe you have some rubbish in /var/cache/edb/dep: Please remove/rename that directory before retrying.
Another possibility is that you have a filesystem/disk problem: Does
Code:
cat /var/lib/layman/bgo-overlay/metadata/md5-cache/*/* >/dev/null
exit quickly?
Edit: Are you using >=eix-0.23.2?
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Tue Mar 26, 2013 2:19 pm    Post subject: Reply with quote

Hi - appreciate your help.

I tried after removing directory, but same problem..

Code:

eix -I -c eix
[I] app-portage/eix (0.25.5@02/20/2013): Search and query ebuilds, portage incl. local settings, ext. overlays, version changes, and more


Code:
host79 dep # ls -al
total 16
drwxrwsr-x 4 root portage 4096 Mar 25 14:22 .
drwxr-sr-x 3 root portage 4096 Mar 25 17:04 ..
drwxrwsr-x 4 root portage 4096 Mar 25 14:22 usr
drwxrwsr-x 3 root portage 4096 Mar 25 14:22 var

host79 dep # rm -rf /var/cache/edb/dep

CACHE_METHOD_PARSE= OVERLAY_CACHE_METHOD=parse eix-update
Reading Portage settings ..
Building database (/var/cache/eix/portage.eix) ..
[0] "gentoo" /usr/portage/ (cache: metadata-md5-or-flat)
     Reading category 160|160 (100%) Finished             
[1] "lxde" /var/lib/layman/lxde (cache: parse)
     Reading category 160|160 (100%) Finished     
[2] "portage-backup" /var/lib/layman/portage-backup (cache: parse)
     Reading category 160|160 (100%) Finished     
[3] "cj-overlay" /var/lib/layman/cj-overlay (cache: parse)
     Reading category 160|160 (100%) Finished             
[4] "bleeding-edge" /var/lib/layman/bleeding-edge (cache: parse)
     Reading category 160|160 (100%) Finished           
[5] "sunrise" /var/lib/layman/sunrise (cache: parse)
     Reading category 160|160 (100%) Finished             
[6] "mozilla" /var/lib/layman/mozilla (cache: parse)
     Reading category 160|160 (100%) Finished       
[7] "bgo-overlay" /var/lib/layman/bgo-overlay (cache: parse)
     Reading category  13|160 (  8%): app-emulation ..   
Can't split filename of ebuild /var/lib/layman/bgo-overlay/app-emulation/faumachine/faumachine-VERSION.ebuild
     Reading category  18|160 ( 11%): app-misc ..     



time cat /var/lib/layman/bgo-overlay/metadata/md5-cache/*/* >/dev/null
Code:

real   0m0.029s
user   0m0.009s
sys   0m0.020s
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Tue Mar 26, 2013 11:41 pm    Post subject: Reply with quote

It is strange that I cannot reproduce it. Maybe it is related with locales: Does LC_ALL=C fix the problem? (BTW: Did the workaround OVERLAY_CACHE_METHOD=metadata-md5 help at least as an intermediate solution?)
Please also use eix-update -v (with OVERLAY_CACHE_METHOD=parse) to find out which ebuild causes the problems (not necessary to post the whole output, just the last lines).
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Wed Mar 27, 2013 12:01 am    Post subject: Reply with quote

Hi-

Yes , this worked.
OVERLAY_CACHE_METHOD=metadata-md5 eix-update
Code:
Reading Portage settings ..
Building database (/var/cache/eix/portage.eix) ..
[0] "gentoo" /usr/portage/ (cache: metadata-md5-or-flat)
     Reading category 160|160 (100%) Finished
[1] "lxde" /var/lib/layman/lxde (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
[2] "portage-backup" /var/lib/layman/portage-backup (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
[3] "cj-overlay" /var/lib/layman/cj-overlay (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
[4] "bleeding-edge" /var/lib/layman/bleeding-edge (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
[5] "sunrise" /var/lib/layman/sunrise (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
[6] "mozilla" /var/lib/layman/mozilla (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
[7] "bgo-overlay" /var/lib/layman/bgo-overlay (cache: metadata-md5)
     Reading category 160|160 (100%) Finished
[8] "local" /usr/local/portage (cache: metadata-md5)
     Reading category 160|160 (100%) EMPTY!
Applying masks ..
Calculating hash tables ..
Writing database file /var/cache/eix/portage.eix ..
Database contains 18042 packages in 160 categories.


using 'OVERLAY_CACHE_METHOD="parse" eix-update -v' ,it's getting stuck at,

Code:
app-misc/dosage-1.3.0: metadata-md5
     Reading category  18|160 ( 11%): app-misc ..
app-misc/dosage-1.5.2: metadata-md5
     Reading category  18|160 ( 11%): app-misc ..
app-misc/dosage-1.5.6: metadata-md5
     Reading category  18|160 ( 11%): app-misc ..
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Wed Mar 27, 2013 7:58 am    Post subject: Reply with quote

Thanks.
upengan78 wrote:
Yes , this worked

Yes, but it is only a hack which just ignores all ebuilds which are not contained already in metadata. It would be much better if eix could be fixed.
I suppose the offending ebuild in your case is elasticsearch-bin-0.20.3.ebuild, but I cannot see anything for which I can imagine eix could become confused: debugging shows here that everything works as it should for parsing this ebuild. Did setting LC_ALL=C help in some way? Does it help if you manually add a trailing newline to that ebuild? Or maybe this ebuild contains obviously broken data on your system?
BTW: you did not reply whether you are using >=eix-0.28.2 or some older version; some bugs concerning parsing had been fixed meanwhile, especially concerning missing newlines at end of file...
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Wed Mar 27, 2013 11:46 am    Post subject: Reply with quote

Actually I did reply about eix version installed.

Here it is again.
eix -I -c eix
Code:
[I] app-portage/eix (0.25.5@02/20/2013): Search and query ebuilds, portage incl. local settings, ext. overlays, version changes, and more


LC_ALL=C didn't really help. OVERLAY_CACHE_METHOD=metadata-md5 eix-update worked fine even without LC_ALL=C setting.

If I attempt to emerge eleasticsearch-bin, i get :
emerge elasticsearch-bin
Code:
Calculating dependencies //var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.ebuild: line 4: $'\r': command not found
/var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.ebuild: line 6: $'\r': command not found
/var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.ebuild: line 14: $'\r': command not found
/var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.ebuild: line 16: $'\r': command not found
/var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.ebuild: line 18: $'\r': command not found
/var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.ebuild: line 19: syntax error near unexpected token `$'{\r''
/var/lib/layman/bgo-overlay/app-misc/elasticsearch-bin/elasticsearch-bin-0.20.3.'build: line 19: `src_install() {
 * ERROR: app-misc/elasticsearch-bin-0.20.3 failed (depend phase):
 *   error sourcing ebuild
 *
 * Call stack:
 *   ebuild.sh, line 551:  Called die
 * The specific snippet of code:
 *                      source "$EBUILD" || die "error sourcing ebuild"
 *
 * If you need support, post the output of `emerge --info '=app-misc/elasticsearch-bin-0.20.3'`,
 * the complete build log and the output of `emerge -pqv '=app-misc/elasticsearch-bin-0.20.3'`.
 * This ebuild is from an overlay named 'bgo-overlay': '/var/lib/layman/bgo-overlay/'
 * Working directory: '/root'
 * S: '/nfs1/var/tmp/portage/portage/app-misc/elasticsearch-bin-0.20.3/work/elasticsearch-bin-0.20.3'                                                         ... done!

!!! All ebuilds that could satisfy "elasticsearch-bin" have been masked.
!!! One of the following masked packages is required to complete your request:
- app-misc/elasticsearch-bin-0.20.3::bgo-overlay (masked by: corruption)
Back to top
View user's profile Send private message
TomWij
Developer
Developer


Joined: 04 Jul 2012
Posts: 1550

PostPosted: Wed Mar 27, 2013 12:31 pm    Post subject: Reply with quote

This has to do with line endings, you will want to use a tool like dos2unix to get rid of the \r.
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Wed Mar 27, 2013 2:11 pm    Post subject: Reply with quote

TomWij wrote:
This has to do with line endings, you will want to use a tool like dos2unix to get rid of the \r.



wow, that was a quick fix to that issue. dos2unix helped. Now I see,

emerge elasticsearch-bin
Code:
Calculating dependencies... done!

!!! All ebuilds that could satisfy "elasticsearch-bin" have been masked.
!!! One of the following masked packages is required to complete your request:
- app-misc/elasticsearch-bin-0.20.3::bgo-overlay (masked by: package.mask, missing keyword)

For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.



Glad that 'corruption' word has now vanished.
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Wed Mar 27, 2013 2:22 pm    Post subject: Reply with quote

upengan78 wrote:
Actually I did reply about eix version installed.
Code:
[I] app-portage/eix (0.25.5@02/20/2013)

Oh, I didn't see. Thank you. Then the hang is completely clear:
ChangeLog wrote:
*eix-0.26.1
... - varsreader: Fix hang for DOS line ends

Just upgrade eix and be happy :wink:
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Wed Mar 27, 2013 2:50 pm    Post subject: Reply with quote

I don't see that particular version available here.

eix eix
Code:
[I] app-portage/eix
     Available versions:  0.23.10 0.25.5 ~0.27.4 ~0.27.6 ~0.28.2 {{clang debug +dep doc



What I have done temporarily is,
Code:
cd /var/lib/layman/bgo-overlay ; find . -type f | xargs -I{} dos2unix {}


After that the eix-update finished without getting stuck using eix-update. I ran it with -v and output is at http://bpaste.net/show/86979/


If you suggest, it's still better to update eix to a higher version, which version one do you recommend?

Thank you all for your help to overcome this issue.
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Wed Mar 27, 2013 3:26 pm    Post subject: Reply with quote

upengan78 wrote:
I don't see that particular version available here.

All later versions will have the bugfix as well, of course.
Quote:
Code:
cd /var/lib/layman/bgo-overlay ; find . -type f | xargs -I{} dos2unix {}

There is a problem with modifying overlays fetched by layman: Depending on the VCS used and the changes made "upstream", it may be that your next layman -S does not update the files you changed or overrides your changes or even stops with an error.
Quote:
it's still better to update eix to a higher version

With a more current version, you do not need to modify the files (at least, concerning eix).
Quote:
which version one do you recommend?

I think the most current version should be quite stable: No bugreports for quite a while. (Except for color issues for which there is no satisfactory solution; see the BUGS section if you have problems with it). eix-0.28.3 which should be in the tree soon contains even more bugfixes and, moreover, has support for bgo.zugaina.org in eix-remote.
Back to top
View user's profile Send private message
upengan78
l33t
l33t


Joined: 27 Jun 2007
Posts: 676
Location: IL

PostPosted: Wed Mar 27, 2013 3:34 pm    Post subject: Reply with quote

Cool. Thanks much 'mv' .

I can understand why you will not be tired after all this..Hope you get some sleep ;)
Back to top
View user's profile Send private message
lock_cda
n00b
n00b


Joined: 03 Mar 2007
Posts: 11

PostPosted: Mon Jul 29, 2013 7:54 am    Post subject: Reply with quote

Hi,

I had a similar problem and I just wanted to share my solution. As it was mentioned before, the problem here is that eix is parsing the metadata of an ebuild from an overlay but there's some missing eclass in its dependecies.

In my case the overlay with problems was /var/lib/layman/krontage. So what I just tried (and worked for me) was to update the overlay's package tree with the following command:

Code:
# layman -s krontage


After that the eix-update command worked without having to force any cache method on eix.


PD: I'm sorry for my bad english, I'm spanish and my english sucks :P.
Back to top
View user's profile Send private message
Yuriy Skvortsov
n00b
n00b


Joined: 30 Dec 2012
Posts: 29
Location: Odessa, Ukraine

PostPosted: Wed Sep 25, 2013 3:57 pm    Post subject: Reply with quote

Hi!
I've got a similar problem with bgo-overlay, except the fact not only eix-update fails (with eix 0.29.3), but also
Code:
emerge --update --deep --with-bdeps=y --newuse world
results to
Code:

--- Invalid atom in /var/lib/layman/bgo-overlay/profiles/package.mask: net-analyzer/mk-livestatus-1.2.0_p2
Calculating dependencies / * ERROR: mail-mta/citadel-6.82 failed (depend phase):
 *   mailer.eclass could not be found by inherit()
 *
 * Call stack:
 *             ebuild.sh, line 549:  Called source '/var/lib/layman/bgo-overlay/mail-mta/citadel/citadel-6.82.ebuild'
 *   citadel-6.82.ebuild, line   5:  Called inherit 'eutils' 'mailer'
 *             ebuild.sh, line 259:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=mail-mta/citadel-6.82'`,
 * the complete build log and the output of `emerge -pqv '=mail-mta/citadel-6.82'`.
 * This ebuild is from an overlay named 'bgo-overlay': '/var/lib/layman/bgo-overlay/'
 * Working directory: '/usr/lib64/portage/pym'
 * S: '/tmp/portage/mail-mta/citadel-6.82/work/citadel-6.82'                                                                                                                 - * ERROR: sci-libs/mkl-10.1.1.019 failed (depend phase):
 *   fortran.eclass could not be found by inherit()
 *
 * Call stack:
 *               ebuild.sh, line 549:  Called source '/var/lib/layman/bgo-overlay/sci-libs/mkl/mkl-10.1.1.019.ebuild'
 *   mkl-10.1.1.019.ebuild, line   5:  Called inherit 'eutils' 'toolchain-funcs' 'fortran' 'check-reqs'
 *               ebuild.sh, line 259:  Called die
 * The specific snippet of code:
 *         [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *
 * If you need support, post the output of `emerge --info '=sci-libs/mkl-10.1.1.019'`,
 * the complete build log and the output of `emerge -pqv '=sci-libs/mkl-10.1.1.019'`.
 * This ebuild is from an overlay named 'bgo-overlay': '/var/lib/layman/bgo-overlay/'
 * Working directory: '/usr/lib64/portage/pym'
 * S: '/tmp/portage/sci-libs/mkl-10.1.1.019/work/mkl-10.1.1.019'


And also
Code:
emerge -av media-gfx/ocrfeeder
(ocrfeeder is in bgo-overlay) gives:
Code:

>>> Emerging (1 of 1) media-gfx/ocrfeeder-0.7.7 from bgo-overlay
!!! Fetched file: ocrfeeder-0.7.7.tar.xz VERIFY FAILED!
!!! Reason: Insufficient data for checksum verification
!!! Got:     
!!! Expected: MD5 RMD160 SHA1 SHA256 SHA512 WHIRLPOOL
 * Fetch failed for 'media-gfx/ocrfeeder-0.7.7', Log file:
 *  '/tmp/portage/media-gfx/ocrfeeder-0.7.7/temp/build.log'

>>> Failed to emerge media-gfx/ocrfeeder-0.7.7, Log file:


Any suggestions?
Back to top
View user's profile Send private message
mv
Advocate
Advocate


Joined: 20 Apr 2005
Posts: 4050

PostPosted: Wed Sep 25, 2013 4:08 pm    Post subject: Reply with quote

Well, bgo-overlay is not a maintained overlay but just created automatically from bug submissions (I do not know details of that script, but it is enough reason to not trust this overlay anyway and copy only manually the ebuilds which you want into your local overlay). In particular, the ebuilds are never updated. In this case, some ebuild is using fortran.eclass which has been obsoleted by the fortran-2.eclass long ago. The ebuild just is no longer valid.
Back to top
View user's profile Send private message
Yuriy Skvortsov
n00b
n00b


Joined: 30 Dec 2012
Posts: 29
Location: Odessa, Ukraine

PostPosted: Thu Sep 26, 2013 4:03 pm    Post subject: Reply with quote

mv, thank you for the hint! I've got rid of bgo-overlay and installed the needed packages with manually downloaded ebuilds. It works :)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portage & Programming All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum