Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Weird screen refresh (KDE 4.9.5)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Fri Feb 01, 2013 6:30 pm    Post subject: Weird screen refresh (KDE 4.9.5) Reply with quote

Hi, guys, I hope you can help me with a weird problem I am having since a month ago, after an update.
Since then, my screen refresh is weird with some programs. For instance, if I open a konsole instance, sometimes the content inside konsole doesn't refresh until I move the window around. The same problem happens with almost every program if a konsole instance is opened. It is also weird the behaviour of the clock, which instead of updating every second, it updates every 2, 3, sometimes 4 seconds...

When any of those windows gets frozen, I can apply the same solution, if I move those windows around, the content refreshes. I tried to disable KDE effects, but the problem persists.

I tried to re-emerge xorg (emerge --emptytree xorg-x11) but it didn't solve the problem. I also tried to re-emerge the whole system (emerge --emptytree --deep world), buuuuuut problem persists.

I am using a gentoo 3.6.11 kernel, kde 4.9.5 and my computer is a dell xps 15 laptop with two graphics cards (maybe this is related to the problem): an intel HD3000 and a nvidia GTS-I-don't-remember-what (optimus is installed and running properly). If I run any of those programs with optimus (optirun program) the problem persists.

My grub configuration for this kernel is as follows:

Quote:

title Gentoo Linux 3.6.11-gentoo
root (hd0,5)
kernel /boot/linux-3.6.11-gentoo root=/dev/sda8 console=tty1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1


I don't have any xorg.conf file since I haven't needed it with this computer (only the xorg.nvidia.conf file, but this doesn't apply, since the problem happens with the KDE desktop, which runs with the intel card).

If you need to know any specific configuration for the kernel or for any other thing, just let me know, I'm a bit lost with this problem which has been freaking me out for a month now.

Thank you in advance for any help, guys.
Back to top
View user's profile Send private message
rmzelnick
n00b
n00b


Joined: 03 Feb 2013
Posts: 24

PostPosted: Sun Feb 03, 2013 2:32 am    Post subject: Re: Weird screen refresh (KDE 4.9.5) Reply with quote

candamil wrote:
Hi, guys, I hope you can help me with a weird problem I am having since a month ago, after an update.
Since then, my screen refresh is weird with some programs. For instance, if I open a konsole instance, sometimes the content inside konsole doesn't refresh until I move the window around. The same problem happens with almost every program if a konsole instance is opened. It is also weird the behaviour of the clock, which instead of updating every second, it updates every 2, 3, sometimes 4 seconds...

When any of those windows gets frozen, I can apply the same solution, if I move those windows around, the content refreshes. I tried to disable KDE effects, but the problem persists.

I tried to re-emerge xorg (emerge --emptytree xorg-x11) but it didn't solve the problem. I also tried to re-emerge the whole system (emerge --emptytree --deep world), buuuuuut problem persists.

I am using a gentoo 3.6.11 kernel, kde 4.9.5 and my computer is a dell xps 15 laptop with two graphics cards (maybe this is related to the problem): an intel HD3000 and a nvidia GTS-I-don't-remember-what (optimus is installed and running properly). If I run any of those programs with optimus (optirun program) the problem persists.

My grub configuration for this kernel is as follows:

Quote:

title Gentoo Linux 3.6.11-gentoo
root (hd0,5)
kernel /boot/linux-3.6.11-gentoo root=/dev/sda8 console=tty1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1


I don't have any xorg.conf file since I haven't needed it with this computer (only the xorg.nvidia.conf file, but this doesn't apply, since the problem happens with the KDE desktop, which runs with the intel card).

If you need to know any specific configuration for the kernel or for any other thing, just let me know, I'm a bit lost with this problem which has been freaking me out for a month now.

Thank you in advance for any help, guys.

Please post /var/log/portage/elog/summary.log (there might be something useful there)
also post /var/log/Xorg.0.log (there's also Xorg.1.log but check the date at the beginning of the file and post the most recent one)

If you can, also post /etc/portage/package.use (I would like to see if you use any especific flags for a package)
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Sun Feb 03, 2013 8:44 am    Post subject: Reply with quote

Hi, rmzelnick. Thanks for your reply. You can get my summary.log here (it's huge):
https://mega.co.nz/#!aRUDCAgJ!IZYvjWaFmMmP1FNJvozlXiw4vFx5Mb9PiqWSFZ5G6oI

This is my most recent Xorg.X.log (0 in this case):
Quote:

[ 21.422]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 21.422] X Protocol Version 11, Revision 0
[ 21.422] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo
[ 21.422] Current Operating System: Linux nomada 3.6.11-gentoo #17 SMP Thu Jan 31 22:35:37 Local time zone must be set--see zic x86_64
[ 21.422] Kernel command line: root=/dev/sda8 console=tty1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
[ 21.422] Build Date: 03 February 2013 03:42:18AM
[ 21.422]
[ 21.422] Current version of pixman: 0.28.0
[ 21.422] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.422] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.423] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 3 08:03:17 2013
[ 21.486] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.512] (==) No Layout section. Using the first Screen section.
[ 21.512] (==) No screen section available. Using defaults.
[ 21.512] (**) |-->Screen "Default Screen Section" (0)
[ 21.512] (**) | |-->Monitor "<default monitor>"
[ 21.513] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 21.513] (==) Automatically adding devices
[ 21.513] (==) Automatically enabling devices
[ 21.513] (==) Automatically adding GPU devices
[ 21.536] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 21.536] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 21.536] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.537] (II) Loader magic: 0x806be0
[ 21.537] (II) Module ABI versions:
[ 21.537] X.Org ANSI C Emulation: 0.4
[ 21.537] X.Org Video Driver: 13.1
[ 21.537] X.Org XInput driver : 18.0
[ 21.537] X.Org Server Extension : 7.0
[ 21.538] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 21.541] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 21.541] (--) PCI: (0:1:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 21.541] (II) Open ACPI successful (/var/run/acpid.socket)
[ 21.552] Initializing built-in extension Generic Event Extension
[ 21.552] Initializing built-in extension SHAPE
[ 21.552] Initializing built-in extension MIT-SHM
[ 21.552] Initializing built-in extension XInputExtension
[ 21.552] Initializing built-in extension XTEST
[ 21.552] Initializing built-in extension BIG-REQUESTS
[ 21.552] Initializing built-in extension SYNC
[ 21.552] Initializing built-in extension XKEYBOARD
[ 21.552] Initializing built-in extension XC-MISC
[ 21.552] Initializing built-in extension XINERAMA
[ 21.552] Initializing built-in extension XFIXES
[ 21.562] Initializing built-in extension RENDER
[ 21.562] Initializing built-in extension RANDR
[ 21.562] Initializing built-in extension COMPOSITE
[ 21.562] Initializing built-in extension DAMAGE
[ 21.562] Initializing built-in extension MIT-SCREEN-SAVER
[ 21.562] Initializing built-in extension DOUBLE-BUFFER
[ 21.562] Initializing built-in extension RECORD
[ 21.562] Initializing built-in extension DPMS
[ 21.562] Initializing built-in extension X-Resource
[ 21.562] Initializing built-in extension XVideo
[ 21.562] Initializing built-in extension XVideo-MotionCompensation
[ 21.563] Initializing built-in extension XFree86-VidModeExtension
[ 21.563] Initializing built-in extension XFree86-DGA
[ 21.563] Initializing built-in extension XFree86-DRI
[ 21.563] Initializing built-in extension DRI2
[ 21.563] (II) LoadModule: "glx"
[ 21.843] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 21.854] (II) Module glx: vendor="X.Org Foundation"
[ 21.854] compiled for 1.13.1, module version = 1.0.0
[ 21.854] ABI class: X.Org Server Extension, version 7.0
[ 21.854] (==) AIGLX enabled
[ 21.855] Loading extension GLX
[ 21.855] (==) Matched intel as autoconfigured driver 0
[ 21.855] (==) Matched intel as autoconfigured driver 1
[ 21.855] (==) Matched vesa as autoconfigured driver 2
[ 21.855] (==) Matched modesetting as autoconfigured driver 3
[ 21.855] (==) Matched fbdev as autoconfigured driver 4
[ 21.855] (==) Assigned the driver to the xf86ConfigLayout
[ 21.855] (II) LoadModule: "intel"
[ 21.855] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 21.876] (II) Module intel: vendor="X.Org Foundation"
[ 21.876] compiled for 1.13.1, module version = 2.20.13
[ 21.876] Module class: X.Org Video Driver
[ 21.876] ABI class: X.Org Video Driver, version 13.1
[ 21.876] (II) LoadModule: "vesa"
[ 21.876] (WW) Warning, couldn't open module vesa
[ 21.876] (II) UnloadModule: "vesa"
[ 21.877] (II) Unloading vesa
[ 21.877] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 21.877] (II) LoadModule: "modesetting"
[ 21.877] (WW) Warning, couldn't open module modesetting
[ 21.877] (II) UnloadModule: "modesetting"
[ 21.877] (II) Unloading modesetting
[ 21.877] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 21.877] (II) LoadModule: "fbdev"
[ 21.878] (WW) Warning, couldn't open module fbdev
[ 21.878] (II) UnloadModule: "fbdev"
[ 21.878] (II) Unloading fbdev
[ 21.878] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 21.878] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 21.880] (++) using VT number 7

[ 21.900] (II) intel(0): using device path '/dev/dri/card0'
[ 21.952] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.952] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.952] (==) intel(0): RGB weight 888
[ 21.952] (==) intel(0): Default visual is TrueColor
[ 21.952] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 21.953] (**) intel(0): Framebuffer tiled
[ 21.953] (**) intel(0): Pixmaps tiled
[ 21.953] (**) intel(0): 3D buffers tiled
[ 21.953] (**) intel(0): Throttling enabled
[ 21.953] (**) intel(0): Delayed flush enabled
[ 21.953] (**) intel(0): "Tear free" disabled
[ 21.953] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 21.953] (II) intel(0): Output LVDS1 has no monitor section
[ 21.953] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 21.969] (II) intel(0): Output VGA1 has no monitor section
[ 21.973] (II) intel(0): Output HDMI1 has no monitor section
[ 21.997] (II) intel(0): Output DP1 has no monitor section
[ 21.997] (II) intel(0): EDID for output LVDS1
[ 21.997] (II) intel(0): Manufacturer: AUO Model: 17ed Serial#: 0
[ 21.997] (II) intel(0): Year: 2010 Week: 0
[ 21.997] (II) intel(0): EDID Version: 1.4
[ 21.997] (II) intel(0): Digital Display Input
[ 21.997] (II) intel(0): 6 bits per channel
[ 21.997] (II) intel(0): Digital interface is undefined
[ 21.997] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 21.997] (II) intel(0): Gamma: 2.20
[ 21.997] (II) intel(0): No DPMS capabilities specified
[ 21.997] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 21.997] (II) intel(0): First detailed timing is preferred mode
[ 21.997] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 21.997] (II) intel(0): redX: 0.676 redY: 0.314 greenX: 0.215 greenY: 0.665
[ 21.997] (II) intel(0): blueX: 0.141 blueY: 0.069 whiteX: 0.313 whiteY: 0.329
[ 21.997] (II) intel(0): Manufacturer's mask: 0
[ 21.997] (II) intel(0): Supported detailed timing:
[ 21.997] (II) intel(0): clock: 142.0 MHz Image Size: 344 x 193 mm
[ 21.997] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2094 h_border: 0
[ 21.997] (II) intel(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1130 v_border: 0
[ 21.997] (II) intel(0): Supported detailed timing:
[ 21.997] (II) intel(0): clock: 142.0 MHz Image Size: 344 x 193 mm
[ 21.997] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2094 h_border: 0
[ 21.997] (II) intel(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1130 v_border: 0
[ 21.997] (II) intel(0): KYYVKB156HW1
[ 21.998] (II) intel(0): Unknown vendor-specific block 0
[ 21.998] (II) intel(0): EDID (in hex):
[ 21.998] (II) intel(0): 00ffffffffffff0006afed1700000000
[ 21.998] (II) intel(0): 0014010490221378022135ad5037aa24
[ 21.998] (II) intel(0): 11505400000001010101010101010101
[ 21.998] (II) intel(0): 010101010101783780ae703832403c30
[ 21.998] (II) intel(0): aa0058c11000001a783780ae70383240
[ 21.998] (II) intel(0): 3c30aa0058c11000001a000000fe004b
[ 21.998] (II) intel(0): 5959564b804231353648573100000000
[ 21.998] (II) intel(0): 000081029b0101000002010a20200001
[ 21.998] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 21.998] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 21.998] (II) intel(0): Printing probed modes for output LVDS1
[ 21.999] (II) intel(0): Modeline "1920x1080"x60.0 142.00 1920 1980 2028 2094 1080 1090 1100 1130 +hsync -vsync (67.8 kHz eP)
[ 21.999] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 21.999] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 21.999] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 21.999] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 21.999] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 21.999] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 21.999] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 22.015] (II) intel(0): EDID for output VGA1
[ 22.019] (II) intel(0): EDID for output HDMI1
[ 22.043] (II) intel(0): EDID for output DP1
[ 22.043] (II) intel(0): Output LVDS1 connected
[ 22.043] (II) intel(0): Output VGA1 disconnected
[ 22.043] (II) intel(0): Output HDMI1 disconnected
[ 22.043] (II) intel(0): Output DP1 disconnected
[ 22.043] (II) intel(0): Using exact sizes for initial modes
[ 22.043] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 22.043] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 22.043] (==) intel(0): DPI set to (96, 96)
[ 22.043] (II) Loading sub module "dri2"
[ 22.043] (II) LoadModule: "dri2"
[ 22.043] (II) Module "dri2" already built-in
[ 22.043] (==) Depth 24 pixmap format is 32 bpp
[ 22.081] (II) intel(0): SNA initialized with SandyBridge backend
[ 22.081] (==) intel(0): Backing store disabled
[ 22.081] (==) intel(0): Silken mouse enabled
[ 22.081] (II) intel(0): HW Cursor enabled
[ 22.081] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.083] (==) intel(0): DPMS enabled
[ 22.086] (II) intel(0): [DRI2] Setup complete
[ 22.086] (II) intel(0): [DRI2] DRI driver: i965
[ 22.086] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.086] (==) intel(0): hotplug detection: "enabled"
[ 22.086] (--) RandR disabled
[ 22.330] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 22.331] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 22.331] (II) AIGLX: enabled GLX_ARB_create_context
[ 22.331] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 22.331] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 22.331] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 22.331] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 22.331] (II) AIGLX: Loaded and initialized i965
[ 22.331] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 22.332] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 22.367] (II) intel(0): Setting screen physical size to 508 x 285
[ 23.340] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.340] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.340] (II) LoadModule: "evdev"
[ 23.340] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.440] (II) Module evdev: vendor="X.Org Foundation"
[ 23.440] compiled for 1.13.1, module version = 2.7.3
[ 23.440] Module class: X.Org XInput Driver
[ 23.440] ABI class: X.Org XInput driver, version 18.0
[ 23.440] (II) Using input driver 'evdev' for 'Power Button'
[ 23.440] (**) Power Button: always reports core events
[ 23.440] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 23.440] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.440] (--) evdev: Power Button: Found keys
[ 23.440] (II) evdev: Power Button: Configuring as keyboard
[ 23.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 23.440] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.440] (**) Option "xkb_rules" "evdev"
[ 23.440] (**) Option "xkb_model" "evdev"
[ 23.440] (**) Option "xkb_layout" "us"
[ 23.493] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 23.493] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.493] (II) Using input driver 'evdev' for 'Video Bus'
[ 23.493] (**) Video Bus: always reports core events
[ 23.493] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 23.493] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 23.493] (--) evdev: Video Bus: Found keys
[ 23.493] (II) evdev: Video Bus: Configuring as keyboard
[ 23.493] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 23.493] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 23.493] (**) Option "xkb_rules" "evdev"
[ 23.493] (**) Option "xkb_model" "evdev"
[ 23.493] (**) Option "xkb_layout" "us"
[ 23.494] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 23.494] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.494] (II) Using input driver 'evdev' for 'Video Bus'
[ 23.494] (**) Video Bus: always reports core events
[ 23.494] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 23.494] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 23.495] (--) evdev: Video Bus: Found keys
[ 23.495] (II) evdev: Video Bus: Configuring as keyboard
[ 23.495] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:33/LNXVIDEO:00/input/input4/event4"
[ 23.495] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 23.495] (**) Option "xkb_rules" "evdev"
[ 23.495] (**) Option "xkb_model" "evdev"
[ 23.495] (**) Option "xkb_layout" "us"
[ 23.496] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 23.496] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.496] (II) Using input driver 'evdev' for 'Power Button'
[ 23.496] (**) Power Button: always reports core events
[ 23.496] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 23.496] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.496] (--) evdev: Power Button: Found keys
[ 23.496] (II) evdev: Power Button: Configuring as keyboard
[ 23.496] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 23.496] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 23.496] (**) Option "xkb_rules" "evdev"
[ 23.496] (**) Option "xkb_model" "evdev"
[ 23.496] (**) Option "xkb_layout" "us"
[ 23.497] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 23.497] (II) No input driver specified, ignoring this device.
[ 23.497] (II) This device may have been added with another device file.
[ 23.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 23.498] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 23.498] (II) Using input driver 'evdev' for 'Sleep Button'
[ 23.498] (**) Sleep Button: always reports core events
[ 23.498] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 23.498] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 23.498] (--) evdev: Sleep Button: Found keys
[ 23.498] (II) evdev: Sleep Button: Configuring as keyboard
[ 23.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 23.498] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 23.498] (**) Option "xkb_rules" "evdev"
[ 23.498] (**) Option "xkb_model" "evdev"
[ 23.498] (**) Option "xkb_layout" "us"
[ 23.499] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 23.500] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event13)
[ 23.500] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[ 23.500] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[ 23.500] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 23.500] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event13"
[ 23.500] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[ 23.500] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[ 23.500] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[ 23.500] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13/event13"
[ 23.500] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 23.500] (**) Option "xkb_rules" "evdev"
[ 23.500] (**) Option "xkb_model" "evdev"
[ 23.500] (**) Option "xkb_layout" "us"
[ 23.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 23.501] (II) No input driver specified, ignoring this device.
[ 23.501] (II) This device may have been added with another device file.
[ 23.502] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 23.502] (II) No input driver specified, ignoring this device.
[ 23.502] (II) This device may have been added with another device file.
[ 23.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 23.502] (II) No input driver specified, ignoring this device.
[ 23.502] (II) This device may have been added with another device file.
[ 23.503] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 23.503] (II) No input driver specified, ignoring this device.
[ 23.503] (II) This device may have been added with another device file.
[ 23.503] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 23.503] (II) No input driver specified, ignoring this device.
[ 23.503] (II) This device may have been added with another device file.
[ 23.504] (II) config/udev: Adding input device Asikgame USB Human(2p) Interface Device (/dev/input/event15)
[ 23.504] (II) No input driver specified, ignoring this device.
[ 23.504] (II) This device may have been added with another device file.
[ 23.504] (II) config/udev: Adding input device Asikgame USB Human(2p) Interface Device (/dev/input/js0)
[ 23.504] (II) No input driver specified, ignoring this device.
[ 23.504] (II) This device may have been added with another device file.
[ 23.505] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[ 23.505] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.505] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 23.505] (**) AT Translated Set 2 keyboard: always reports core events
[ 23.505] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[ 23.505] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 23.505] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 23.505] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 23.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input7/event7"
[ 23.505] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 23.505] (**) Option "xkb_rules" "evdev"
[ 23.505] (**) Option "xkb_model" "evdev"
[ 23.505] (**) Option "xkb_layout" "us"
[ 23.506] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 23.506] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 23.507] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 23.507] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 23.507] (II) LoadModule: "synaptics"
[ 23.507] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 23.522] (II) Module synaptics: vendor="X.Org Foundation"
[ 23.522] compiled for 1.13.1, module version = 1.6.2
[ 23.522] Module class: X.Org XInput Driver
[ 23.522] ABI class: X.Org XInput driver, version 18.0
[ 23.522] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 23.522] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 23.522] (**) Option "Device" "/dev/input/event14"
[ 23.547] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 23.547] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.547] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 23.560] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 23.560] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 23.560] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 23.560] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 23.560] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.039
[ 23.561] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 23.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 23.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 23.561] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 23.561] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.561] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 23.561] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 23.562] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 23.562] (II) No input driver specified, ignoring this device.
[ 23.562] (II) This device may have been added with another device file.
[ 85.416] (II) intel(0): EDID vendor "AUO", prod id 6125
[ 85.416] (II) intel(0): Printing DDC gathered Modelines:
[ 85.416] (II) intel(0): Modeline "1920x1080"x0.0 142.00 1920 1980 2028 2094 1080 1090 1100 1130 +hsync -vsync (67.8 kHz eP)


And this is my package.use:

Quote:

dev-lang/php apache2
=app-mobilephone/obexd-0.46 -server


In case you find it useful, I include my make.conf as well:
Quote:

CFLAGS="-march=native -mtune=generic -O2 -pipe"
CXXFLAGS="${CFLAGS}"
CHOST="x86_64-pc-linux-gnu"
USE="a52 aac aalib acpi acpicall alisp alsa apache2 apm apng arts bash-completion bluetooth bzip2 cairo cdda cddb cdparanoia cdr co
nsolekit cracklib css curl cups dbus declarative device-mapper dga dhcpcd directfb disk-partition dri dv dvb dvd dvdr emacs embedde
d encode examples exif extras faac fbcon ffmpeg flac foomaticdb ftp fts3 gcj gd gif gimp gnome gnome-keyring gnutls gphoto2 gstream
er gtk gudev gzip hal handbook hddtemp hwdb icu id3tag imagemagick imlib ipod ipv6 jabber java java6 javascript joystick jpeg jpeg2
k kde kdepim kontack kpathsea lame latex ldap libcaca libkms libnotify libsamplerate lm_sensors mad matroska midi mime minizip mmx
mng modules mp3 mp3tunes mp4 mpeg mplayer msn msql mtp multilib mysql mysqli nas ncurses netboot networkmanager nls nocd nsplugin n
vidia ogg opengl openmp oss pam pdf pdo php plasma png policykit pulseaudio python qt3support qt4 quicktime raw rdesktop reports rs
s ruby_targets_ruby19 samba scanner semantic-desktop session server sip sndfile snmp sockets sound sox speech sql sqlite sqlite3 ss
e sse2 ssl startup-notification static-libs svg svga theora threads tiff timidity truetype twolame udev unicode usb v4l vcd video v
ideo_cards_nouveau video_cards_nvidia video_cards_vmware videos vnc vorbis wav wavpack webkit wifi win32codecs wxwidgets X x264 xa
xcb xcomposite xine xinerama xml xmlwriter xosd xprint xulrunner xv xvid zip -nss"
MAKEOPTS="-j5"
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="intel nvidia"
LINGUAS="es"
FEATURES="parallel-fetch userfetch"
ACCEPT_LICENSE="dlj-1.1 PUEL skype-eula AdobeFlash-10 AdobeFlash-10.1 googleearth AdobeFlash-10.3 google-talkplugin"
source /var/lib/layman/make.conf


I have taken a look, but I couldn't find anything useful. I hope you are more lucky than me. Thank you again.
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Sun Feb 03, 2013 5:10 pm    Post subject: Reply with quote

I'm starting to think that maybe it's not a graphics problem. I've been using the computer for two days with KDE effects disabled, and now the behaviour is a little different. Instead of freezing the content of some windows, the whole screen freezes and after a couple of seconds it works properly again, like if the screen could not access the processor for a couple of seconds. Maybe it's something related to the kernel. My kernel configuration is here (3.6.11-gentoo):

https://mega.co.nz/#!SdkzlDDL!fL_1G2pyMQFGbNDhGeUU-0auvkMv8oU7QYwJQTEN1Ao

Thank you.
Back to top
View user's profile Send private message
rmzelnick
n00b
n00b


Joined: 03 Feb 2013
Posts: 24

PostPosted: Sun Feb 03, 2013 8:37 pm    Post subject: Reply with quote

Code:

[ 21.877] (II) LoadModule: "modesetting"
[ 21.877] (WW) Warning, couldn't open module modesetting
[ 21.877] (II) UnloadModule: "modesetting"
[ 21.877] (II) Unloading modesetting
[ 21.877] (EE) Failed to load module "modesetting" (module does not exist, 0)


Please follow the instructions in The X Server Configuration HOWTO under "Kernel modesetting" section.
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Sun Feb 03, 2013 10:29 pm    Post subject: Reply with quote

Thank you, rmzelnick. Almost done, but not finished yet. You were right with your advice, I disabled the old fb modules, installed the modesetting xorg driver and recompiled every xorg driver with emerge @x11-module-rebuild, and now the system is more fluent, but the problem still persists.

This is the new output for Xorg.0.log:
Quote:

[ 20.475]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 20.475] X Protocol Version 11, Revision 0
[ 20.475] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo
[ 20.475] Current Operating System: Linux nomada 3.6.11-gentoo #21 SMP Sun Feb 3 21:37:28 Local time zone must be set--see zic
x86_64
[ 20.475] Kernel command line: root=/dev/sda8 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
[ 20.475] Build Date: 03 February 2013 08:27:29AM
[ 20.475]
[ 20.475] Current version of pixman: 0.28.0
[ 20.476] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.476] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.476] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 3 22:12:11 2013
[ 20.526] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.526] (==) No Layout section. Using the first Screen section.
[ 20.526] (==) No screen section available. Using defaults.
[ 20.526] (**) |-->Screen "Default Screen Section" (0)
[ 20.526] (**) | |-->Monitor "<default monitor>"
[ 20.526] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.526] (==) Automatically adding devices
[ 20.526] (==) Automatically enabling devices
[ 20.527] (==) Automatically adding GPU devices
[ 20.552] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.552] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 20.552] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.552] (II) Loader magic: 0x806be0
[ 20.552] (II) Module ABI versions:
[ 20.552] X.Org ANSI C Emulation: 0.4
[ 20.552] X.Org Video Driver: 13.1
[ 20.552] X.Org XInput driver : 18.0
[ 20.552] X.Org Server Extension : 7.0
[ 20.553] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 20.556] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 20.556] (--) PCI: (0:1:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432,
I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 20.557] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.569] Initializing built-in extension Generic Event Extension
[ 20.569] Initializing built-in extension SHAPE
[ 20.569] Initializing built-in extension MIT-SHM
[ 20.569] Initializing built-in extension XInputExtension
[ 20.569] Initializing built-in extension XTEST
[ 20.569] Initializing built-in extension BIG-REQUESTS
[ 20.569] Initializing built-in extension SYNC
[ 20.569] Initializing built-in extension XKEYBOARD
[ 20.578] Initializing built-in extension XC-MISC
[ 20.578] Initializing built-in extension XINERAMA
[ 20.578] Initializing built-in extension XFIXES
[ 20.578] Initializing built-in extension RENDER
[ 20.578] Initializing built-in extension RANDR
[ 20.578] Initializing built-in extension COMPOSITE
[ 20.578] Initializing built-in extension DAMAGE
[ 20.578] Initializing built-in extension MIT-SCREEN-SAVER
[ 20.578] Initializing built-in extension DOUBLE-BUFFER
[ 20.578] Initializing built-in extension RECORD
[ 20.578] Initializing built-in extension DPMS
[ 20.578] Initializing built-in extension X-Resource
[ 20.578] Initializing built-in extension XVideo
[ 20.578] Initializing built-in extension XVideo-MotionCompensation
[ 20.578] Initializing built-in extension XFree86-VidModeExtension
[ 20.578] Initializing built-in extension XFree86-DGA
[ 20.578] Initializing built-in extension XFree86-DRI
[ 20.578] Initializing built-in extension DRI2
[ 20.578] (II) LoadModule: "glx"
[ 20.871] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 20.892] (II) Module glx: vendor="X.Org Foundation"
[ 20.892] compiled for 1.13.1, module version = 1.0.0
[ 20.892] ABI class: X.Org Server Extension, version 7.0
[ 20.892] (==) AIGLX enabled
[ 20.892] Loading extension GLX
[ 20.892] (==) Matched intel as autoconfigured driver 0
[ 20.892] (==) Matched intel as autoconfigured driver 1
[ 20.892] (==) Matched vesa as autoconfigured driver 2
[ 20.892] (==) Matched modesetting as autoconfigured driver 3
[ 20.892] (==) Matched fbdev as autoconfigured driver 4
[ 20.892] (==) Assigned the driver to the xf86ConfigLayout
[ 20.892] (II) LoadModule: "intel"
[ 20.892] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 20.934] (II) Module intel: vendor="X.Org Foundation"
[ 20.934] compiled for 1.13.1, module version = 2.20.13
[ 20.934] Module class: X.Org Video Driver
[ 20.934] ABI class: X.Org Video Driver, version 13.1
[ 20.934] (II) LoadModule: "vesa"
[ 20.934] (WW) Warning, couldn't open module vesa
[ 20.935] (II) UnloadModule: "vesa"
[ 20.935] (II) Unloading vesa
[ 20.935] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 20.935] (II) LoadModule: "modesetting"
[ 20.935] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 20.941] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.941] compiled for 1.13.1, module version = 0.5.0
[ 20.941] Module class: X.Org Video Driver
[ 20.941] ABI class: X.Org Video Driver, version 13.1
[ 20.941] (II) LoadModule: "fbdev"
[ 20.942] (WW) Warning, couldn't open module fbdev
[ 20.942] (II) UnloadModule: "fbdev"
[ 20.942] (II) Unloading fbdev
[ 20.942] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 20.942] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 20.944] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.944] (++) using VT number 7

[ 20.969] (II) intel(0): using device path '/dev/dri/card0'
[ 21.012] (WW) Falling back to old probe method for modesetting
[ 21.012] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.012] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.012] (==) intel(0): RGB weight 888
[ 21.012] (==) intel(0): Default visual is TrueColor
[ 21.013] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 21.013] (**) intel(0): Framebuffer tiled
[ 21.013] (**) intel(0): Pixmaps tiled
[ 21.013] (**) intel(0): 3D buffers tiled
[ 21.013] (**) intel(0): Throttling enabled
[ 21.013] (**) intel(0): Delayed flush enabled
[ 21.013] (**) intel(0): "Tear free" disabled
[ 21.013] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 21.014] (II) intel(0): Output LVDS1 has no monitor section
[ 21.014] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 21.030] (II) intel(0): Output VGA1 has no monitor section
[ 21.034] (II) intel(0): Output HDMI1 has no monitor section
[ 21.058] (II) intel(0): Output DP1 has no monitor section
[ 21.058] (II) intel(0): EDID for output LVDS1
[ 21.058] (II) intel(0): Manufacturer: AUO Model: 17ed Serial#: 0
[ 21.058] (II) intel(0): Year: 2010 Week: 0
[ 21.058] (II) intel(0): EDID Version: 1.4
[ 21.058] (II) intel(0): Digital Display Input
[ 21.058] (II) intel(0): 6 bits per channel
[ 21.058] (II) intel(0): Digital interface is undefined
[ 21.058] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 21.058] (II) intel(0): Gamma: 2.20
[ 21.058] (II) intel(0): No DPMS capabilities specified
[ 21.058] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 21.058] (II) intel(0): First detailed timing is preferred mode
[ 21.058] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 21.058] (II) intel(0): redX: 0.676 redY: 0.314 greenX: 0.215 greenY: 0.665
[ 21.058] (II) intel(0): blueX: 0.141 blueY: 0.069 whiteX: 0.313 whiteY: 0.329
[ 21.058] (II) intel(0): Manufacturer's mask: 0
[ 21.058] (II) intel(0): Supported detailed timing:
[ 21.059] (II) intel(0): clock: 142.0 MHz Image Size: 344 x 193 mm
[ 21.059] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2094 h_border: 0
[ 21.059] (II) intel(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1130 v_border: 0
[ 21.059] (II) intel(0): Supported detailed timing:
[ 21.059] (II) intel(0): clock: 142.0 MHz Image Size: 344 x 193 mm
[ 21.059] (II) intel(0): h_active: 1920 h_sync: 1980 h_sync_end 2028 h_blank_end 2094 h_border: 0
[ 21.059] (II) intel(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1130 v_border: 0
[ 21.059] (II) intel(0): KYYVK�B156HW1
[ 21.059] (II) intel(0): Unknown vendor-specific block 0
[ 21.059] (II) intel(0): EDID (in hex):
[ 21.059] (II) intel(0): 00ffffffffffff0006afed1700000000
[ 21.059] (II) intel(0): 0014010490221378022135ad5037aa24
[ 21.059] (II) intel(0): 11505400000001010101010101010101
[ 21.059] (II) intel(0): 010101010101783780ae703832403c30
[ 21.059] (II) intel(0): aa0058c11000001a783780ae70383240
[ 21.059] (II) intel(0): 3c30aa0058c11000001a000000fe004b
[ 21.059] (II) intel(0): 5959564b804231353648573100000000
[ 21.059] (II) intel(0): 000081029b0101000002010a20200001
[ 21.060] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 21.060] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 21.060] (II) intel(0): Printing probed modes for output LVDS1
[ 21.060] (II) intel(0): Modeline "1920x1080"x60.0 142.00 1920 1980 2028 2094 1080 1090 1100 1130 +hsync -vsync (67.8 kHz eP)
[ 21.060] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 21.060] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 21.060] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 21.060] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 21.060] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 21.060] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 21.060] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 21.076] (II) intel(0): EDID for output VGA1
[ 21.080] (II) intel(0): EDID for output HDMI1
[ 21.104] (II) intel(0): EDID for output DP1
[ 21.104] (II) intel(0): Output LVDS1 connected
[ 21.104] (II) intel(0): Output VGA1 disconnected
[ 21.104] (II) intel(0): Output HDMI1 disconnected
[ 21.104] (II) intel(0): Output DP1 disconnected
[ 21.104] (II) intel(0): Using exact sizes for initial modes
[ 21.104] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 21.104] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.104] (==) intel(0): DPI set to (96, 96)
[ 21.104] (II) Loading sub module "dri2"
[ 21.104] (II) LoadModule: "dri2"
[ 21.104] (II) Module "dri2" already built-in
[ 21.104] (II) UnloadModule: "modesetting"
[ 21.104] (II) Unloading modesetting
[ 21.104] (==) Depth 24 pixmap format is 32 bpp
[ 21.107] (II) intel(0): SNA initialized with SandyBridge backend
[ 21.107] (==) intel(0): Backing store disabled
[ 21.107] (==) intel(0): Silken mouse enabled
[ 21.107] (II) intel(0): HW Cursor enabled
[ 21.107] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.109] (==) intel(0): DPMS enabled
[ 21.110] (II) intel(0): [DRI2] Setup complete
[ 21.110] (II) intel(0): [DRI2] DRI driver: i965
[ 21.110] (II) intel(0): direct rendering: DRI2 Enabled
[ 21.110] (==) intel(0): hotplug detection: "enabled"
[ 21.110] (--) RandR disabled
[ 21.374] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.374] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.374] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.374] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.374] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 21.374] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.374] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.374] (II) AIGLX: Loaded and initialized i965
[ 21.374] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.376] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 21.402] (II) intel(0): Setting screen physical size to 508 x 285
[ 22.397] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 22.405] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.405] (II) LoadModule: "evdev"
[ 22.405] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 22.764] (II) Module evdev: vendor="X.Org Foundation"
[ 22.764] compiled for 1.13.1, module version = 2.7.3
[ 22.764] Module class: X.Org XInput Driver
[ 22.764] ABI class: X.Org XInput driver, version 18.0
[ 22.764] (II) Using input driver 'evdev' for 'Power Button'
[ 22.764] (**) Power Button: always reports core events
[ 22.764] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 22.764] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.764] (--) evdev: Power Button: Found keys
[ 22.764] (II) evdev: Power Button: Configuring as keyboard
[ 22.764] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 22.764] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 22.764] (**) Option "xkb_rules" "evdev"
[ 22.764] (**) Option "xkb_model" "evdev"
[ 22.764] (**) Option "xkb_layout" "us"
[ 22.850] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 22.850] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.850] (II) Using input driver 'evdev' for 'Video Bus'
[ 22.850] (**) Video Bus: always reports core events
[ 22.850] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 22.850] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 22.850] (--) evdev: Video Bus: Found keys
[ 22.850] (II) evdev: Video Bus: Configuring as keyboard
[ 22.850] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 22.850] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 22.850] (**) Option "xkb_rules" "evdev"
[ 22.850] (**) Option "xkb_model" "evdev"
[ 22.850] (**) Option "xkb_layout" "us"
[ 22.851] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 22.852] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.852] (II) Using input driver 'evdev' for 'Video Bus'
[ 22.852] (**) Video Bus: always reports core events
[ 22.852] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 22.852] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 22.852] (--) evdev: Video Bus: Found keys
[ 22.852] (II) evdev: Video Bus: Configuring as keyboard
[ 22.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:33/LNXVIDEO:00/input/input4/event
4"
[ 22.852] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 22.852] (**) Option "xkb_rules" "evdev"
[ 22.852] (**) Option "xkb_model" "evdev"
[ 22.852] (**) Option "xkb_layout" "us"
[ 22.853] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 22.853] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.853] (II) Using input driver 'evdev' for 'Power Button'
[ 22.853] (**) Power Button: always reports core events
[ 22.853] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 22.853] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.853] (--) evdev: Power Button: Found keys
[ 22.853] (II) evdev: Power Button: Configuring as keyboard
[ 22.853] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 22.853] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 22.853] (**) Option "xkb_rules" "evdev"
[ 22.853] (**) Option "xkb_model" "evdev"
[ 22.853] (**) Option "xkb_layout" "us"
[ 22.854] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 22.854] (II) No input driver specified, ignoring this device.
[ 22.854] (II) This device may have been added with another device file.
[ 22.855] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 22.855] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 22.855] (II) Using input driver 'evdev' for 'Sleep Button'
[ 22.855] (**) Sleep Button: always reports core events
[ 22.855] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 22.855] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 22.855] (--) evdev: Sleep Button: Found keys
[ 22.855] (II) evdev: Sleep Button: Configuring as keyboard
[ 22.855] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 22.855] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 22.855] (**) Option "xkb_rules" "evdev"
[ 22.855] (**) Option "xkb_model" "evdev"
[ 22.855] (**) Option "xkb_layout" "us"
[ 22.856] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 22.857] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event13)
[ 22.857] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[ 22.857] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[ 22.857] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 22.857] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event13"
[ 22.857] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[ 22.857] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[ 22.857] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[ 22.857] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13/event13"
[ 22.857] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 22.857] (**) Option "xkb_rules" "evdev"
[ 22.857] (**) Option "xkb_model" "evdev"
[ 22.857] (**) Option "xkb_layout" "us"
[ 22.858] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 22.858] (II) No input driver specified, ignoring this device.
[ 22.858] (II) This device may have been added with another device file.
[ 22.859] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 22.859] (II) No input driver specified, ignoring this device.
[ 22.859] (II) This device may have been added with another device file.
[ 22.859] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 22.859] (II) No input driver specified, ignoring this device.
[ 22.859] (II) This device may have been added with another device file.
[ 22.860] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 22.860] (II) No input driver specified, ignoring this device.
[ 22.860] (II) This device may have been added with another device file.
[ 22.860] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 22.861] (II) No input driver specified, ignoring this device.
[ 22.861] (II) This device may have been added with another device file.
[ 22.861] (II) config/udev: Adding input device Asikgame USB Human(2p) Interface Device (/dev/input/event15)
[ 22.861] (II) No input driver specified, ignoring this device.
[ 22.861] (II) This device may have been added with another device file.
[ 22.862] (II) config/udev: Adding input device Asikgame USB Human(2p) Interface Device (/dev/input/js0)
[ 22.862] (II) No input driver specified, ignoring this device.
[ 22.862] (II) This device may have been added with another device file.
[ 22.862] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[ 22.862] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 22.862] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 22.862] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.862] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event7"
[ 22.862] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 22.862] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 22.862] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 22.863] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input7/event7"
[ 22.863] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 22.863] (**) Option "xkb_rules" "evdev"
[ 22.863] (**) Option "xkb_model" "evdev"
[ 22.863] (**) Option "xkb_layout" "us"
[ 22.864] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 22.864] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 22.864] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 22.864] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 22.864] (II) LoadModule: "synaptics"
[ 22.864] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 22.875] (II) Module synaptics: vendor="X.Org Foundation"
[ 22.875] compiled for 1.13.1, module version = 1.6.2
[ 22.875] Module class: X.Org XInput Driver
[ 22.875] ABI class: X.Org XInput driver, version 18.0
[ 22.875] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 22.875] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.875] (**) Option "Device" "/dev/input/event14"
[ 22.903] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 22.903] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.903] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.913] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 22.913] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 22.913] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 22.913] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 22.913] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.039
[ 22.913] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 22.913] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 22.913] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 22.913] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 22.914] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 22.914] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 22.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 22.915] (II) No input driver specified, ignoring this device.
[ 22.915] (II) This device may have been added with another device file.
[ 107.540] (II) intel(0): EDID vendor "AUO", prod id 6125
[ 107.541] (II) intel(0): Printing DDC gathered Modelines:
[ 107.541] (II) intel(0): Modeline "1920x1080"x0.0 142.00 1920 1980 2028 2094 1080 1090 1100 1130 +hsync -vsync (67.8 kHz eP)


Now, the screen updates properly for 2 or 3 seconds, then freezes (everything but the mouse) for another 3 or 4...

Just in case it has something to do with the problem, I'm including the list of services as well:

Quote:

nomada candamil # rc-update show
NetworkManager | default
acpid | default
alsasound | default
apache2 | default
bluetooth | default
bootmisc | boot
cpufrequtils | default
cupsd | default
dbus | default
devfs | sysinit
dmesg | sysinit
dnsmasq | default
fsck | boot
hostname | boot
hwclock | boot
irqbalance | default
keymaps | boot
killprocs | shutdown
laptop_mode | default
lm_sensors | default
local | default
localmount | boot
modules | boot
mount-ro | shutdown
mtab | boot
mysql | default
net.lo | boot
netmount | default
nfs | default
ntpd | default
optimus | default
procfs | boot
root | boot
savecache | shutdown
sshd | default
swap | boot
swapfiles | boot
sysctl | boot
sysfs | sysinit
syslog-ng | default
termencoding | boot
tmpfiles.setup | boot
tomcat-7-tomcat | default
udev | sysinit
udev-mount | sysinit
urandom | boot
vixie-cron | default
xdm | default


Thank you again.
Back to top
View user's profile Send private message
rmzelnick
n00b
n00b


Joined: 03 Feb 2013
Posts: 24

PostPosted: Tue Feb 05, 2013 6:54 pm    Post subject: Reply with quote

Hi candamil,
I see that you don't have some services required even before installing KDE, but let me show you a few problems in the log and then we can move on to those services:

Quote:

[ 21.876] (II) LoadModule: "vesa"
[ 21.876] (WW) Warning, couldn't open module vesa
[ 21.876] (II) UnloadModule: "vesa"
[ 21.877] (II) Unloading vesa
[ 21.877] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 21.877] (II) LoadModule: "fbdev"
[ 21.878] (WW) Warning, couldn't open module fbdev
[ 21.878] (II) UnloadModule: "fbdev"
[ 21.878] (II) Unloading fbdev
[ 21.878] (EE) Failed to load module "fbdev" (module does not exist, 0)


If fbdev and vesa are built-in just ignore those. Moving on check out KDE - Gentoo Wiki under the "services" section, make sure you have those services running.
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Wed Feb 06, 2013 9:48 pm    Post subject: Reply with quote

Thanks for the hint, rmzelnick. I added the consolekit service (polkit and udisks can't be loaded as a typical service with rc-update) and added the udisk use (emerge --newuse didn't compile anything), but it seems that it does not improve anything yet.

I have also gone through the installation manual, the xorg manual and the kde manual, in case there are new stuff to be done since my last installation, a couple of years ago, but I didn't find anything that I haven't done yet.

I also created a new user to verify that it's not a KDE configuration problem, aaaand no, it's not. So time to keep searching. Thank you anyway, you are wasting a lot of time with this :P.
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Thu Feb 07, 2013 7:27 pm    Post subject: Reply with quote

A new hint. I installed XFCE to check if it works properly, and it does, so it seems a KDE problem.
Back to top
View user's profile Send private message
USTruck
Guru
Guru


Joined: 21 Aug 2005
Posts: 419
Location: La Louviere (Belgique)

PostPosted: Fri Feb 08, 2013 5:04 am    Post subject: Reply with quote

Hello

Intel and nvidia ... optimus tech !!!!


Quote:
In case you find it useful, I include my make.conf as well:
Citation:

INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="intel nvidia"


About configuration of make.conf
INPUT_DEVICES ; add evdev, remove keyboard and mouse and rebuild x11-drivers
VIDEO_CARDS ; intel and nvidia .... optimus technology look at http://en.gentoo-wiki.com/wiki/X.Org/nVidia_Optimus
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Fri Feb 08, 2013 7:34 am    Post subject: Reply with quote

Hi, USTruck, thanks for your reply.

As I have said in my first post, optimus server is installed and running properly, so it seems that is not the problem. Actually, this is an old installation and this problem happens after an update, and only in KDE (XFCE runs properly as well), so I suppose it's related to a KDE update or to a KDE service update or configuration (maybe something related to python or QT?).

In other hand, I have fixed the evdev thing for INPUT_DEVICES. Thanks for the hint.
Back to top
View user's profile Send private message
USTruck
Guru
Guru


Joined: 21 Aug 2005
Posts: 419
Location: La Louviere (Belgique)

PostPosted: Fri Feb 08, 2013 9:10 am    Post subject: Reply with quote

Hello,

What about
eselect qtgraphicssystem
eselect mesa
eselect opengl

The qtgraphicssystem use by default 'Raster', I don't know if this part can be handled differently by Intel and Nvidia drivers ....
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Fri Feb 08, 2013 11:56 pm    Post subject: Reply with quote

Hi, USTruck. I have just tried to change those eselect values, but it seems that it doesn't solve the problem. It has to be somewhere else...
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Mon Feb 11, 2013 10:35 pm    Post subject: Reply with quote

New information. For several reasons I had to reinstall the system. Even with a new installation and default configuration, this problem still happens, but only happens with specific actions. This is what I got up to now:
- Sometimes, when opening konsole or writing something in konsole (just writing). Randomly also happens when text is being displayed in konsole, as when compiling.
- When the screen fades out, like when KDE shows a window message.
- Sometimes, when I open glxgears to try if optimus works (it works).

Another hint: not the whole screen is frozen. There is a small row in the upper side (about 100 px) which refreshes properly. If I use the scroll in the desktop, like when changing from one desktop to another, the screen refreshes again.

EDIT: when it happens, /var/log/Xorg.0.log doesn't show anything new.
EDIT 2: now the clock works properly.
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Mon Feb 11, 2013 10:51 pm    Post subject: Reply with quote

Well, it happened again and I managed to record it on video so you can check what happens exactly. Maybe this could help anybody to understand the problem:

https://docs.google.com/file/d/0B3hKBedmygbWUFp0cm83YjBGY28/edit?usp=sharing
Back to top
View user's profile Send private message
candamil
Tux's lil' helper
Tux's lil' helper


Joined: 19 Mar 2012
Posts: 84

PostPosted: Mon Feb 18, 2013 9:21 pm    Post subject: Reply with quote

After doing some tests, finally I found the problem. It seems OpenGL doesn't work properly. If I change the engine in systemsettings from OpenGL to XRender, it works perfectly fine. I tried to change the OpenGL options, such as QT system, scaling method, activate/deactivate shaders and VSync, but it doesn't solve anything. Any ideas with this new hint?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum