Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
can't seen nokia on com-port via usb link
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
syn0ptik
Apprentice
Apprentice


Joined: 09 Jan 2013
Posts: 218

PostPosted: Thu Jan 10, 2013 1:51 am    Post subject: can't seen nokia on com-port via usb link Reply with quote

I doubt it kernel config mistake. Here my configuration related serial and usb ports. If i did modprobe -av option modules were loaded, after mdev -s info /dev/ nothing news happened. There should be /dev/ttyUSB0. On the nokia happened promt about usb connections and it gives chose type of connection to PC. With PC-suit I've no problem to connect, but on linux in doubt.
Code:
CONFIG_MOUSE_SERIAL=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_KGDB_SERIAL_CONSOLE=y
Back to top
View user's profile Send private message
syn0ptik
Apprentice
Apprentice


Joined: 09 Jan 2013
Posts: 218

PostPosted: Fri Jan 11, 2013 6:34 am    Post subject: Reply with quote

here what kernel said about modules loading and device appearance.
Code:
bus: 'usb-serial': add driver option1
USB Serial support registered for GSM modem (1-port)
bus: 'usb': add driver option
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems

mdev -s not helpful
lsusb not view new devices after attaching nokia phone.
Back to top
View user's profile Send private message
syn0ptik
Apprentice
Apprentice


Joined: 09 Jan 2013
Posts: 218

PostPosted: Mon Jan 14, 2013 12:12 am    Post subject: Reply with quote

no ideas why that happening?
Back to top
View user's profile Send private message
doedel
Guru
Guru


Joined: 05 Feb 2006
Posts: 542
Location: DK

PostPosted: Sun Jan 20, 2013 3:19 pm    Post subject: Reply with quote

Please check your kernel configuration, i think USB Modem (CDC ACM or something like this) should do the job. If not, post again. Never say die ;).

It should show up as ttyACM
_________________
i5 Gentoo | Phenom II Gentoo | i7 Gentoo
http://krumeltee.wordpress.com/ -> Embedded-/AVR32-Linux, AVR, ..., ...
Back to top
View user's profile Send private message
syn0ptik
Apprentice
Apprentice


Joined: 09 Jan 2013
Posts: 218

PostPosted: Mon Jan 28, 2013 8:16 am    Post subject: Reply with quote

I've tryed with acm driver, anyway after mdev -s usb tty's not appears in /dev/
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum