Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Mouse/keyboard off in X since udev-197 update
View unanswered posts
View posts from last 24 hours

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Tue Jan 22, 2013 9:59 pm    Post subject: Mouse/keyboard off in X since udev-197 update Reply with quote

Hi,
Something has upset just one of my machines since the stabilization of udev-197-r3. While the machine was working fine prior to this update unfortunately there have been a number of file changes (the kernel to add devtmpfs, xorg.conf to try nouveau and then going back to nvidia) and stupidly I haven't saved everything so I'm approaching this as a new installation.

The symptom I'm dealing with is that the keyboard is working fine if I boot without X. (xdm disabled in rc-update) I can work at the console, do updates, etc. Everything works fine at the console. After that, if I start xdm from the command line, X comes up to the KDE login screen but now keyboard isn't functional. The mouse LED is on but the mouse doesn't function. If I ssh into the machine and shut off X then the keyboard once again works.

Best I can see the warning message in Xorg.0.log that's at issue here is this:

[ 20349.369] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20349.369] (WW) Disabling Mouse0
[ 20349.369] (WW) Disabling Keyboard0

I'll attached Xorg.0.log as well as xorg.conf to this thread.

Basic setup stuff from make.conf:

VIDEO_CARDS="nvidia"
INPUT_DEVICES="evdev"

Note I also tried no xorg.conf wth both the nvidia & nouveau drivers but in neither case did X even start.

Thanks in advance,
Mark


Quote:


[ 20349.368]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 20349.368] X Protocol Version 11, Revision 0
[ 20349.368] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo
[ 20349.368] Current Operating System: Linux k2 3.6.11-gentoo #17 SMP PREEMPT Mon Jan 21 16:51:58 PST 2013 x86_64
[ 20349.368] Kernel command line: root=/dev/md126
[ 20349.368] Build Date: 20 January 2013 07:42:51AM
[ 20349.368]
[ 20349.368] Current version of pixman: 0.28.0
[ 20349.368] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20349.368] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20349.368] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 22 13:30:31 2013
[ 20349.368] (==) Using config file: "/etc/X11/xorg.conf"
[ 20349.368] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20349.368] (==) ServerLayout "k2"
[ 20349.368] (**) |-->Screen "Screen0" (0)
[ 20349.368] (**) | |-->Monitor "Samsung740n"
[ 20349.369] ([/code]**) | |-->Device "Card0"
[ 20349.369] (**) |-->Input Device "Mouse0"
[ 20349.369] (**) |-->Input Device "Keyboard0"
[ 20349.369] (==) Automatically adding devices
[ 20349.369] (==) Automatically enabling devices
[ 20349.369] (==) Automatically adding GPU devices
[ 20349.369] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 20349.369] Entry deleted from font path.
[ 20349.369] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20349.369] Entry deleted from font path.
[ 20349.369] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20349.369] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 20349.369] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20349.369] (WW) Disabling Mouse0
[ 20349.369] (WW) Disabling Keyboard0
[ 20349.369] (II) Loader magic: 0x807bc0
[ 20349.369] (II) Module ABI versions:
[ 20349.369] X.Org ANSI C Emulation: 0.4
[ 20349.369] X.Org Video Driver: 13.1
[ 20349.369] X.Org XInput driver : 18.0
[ 20349.369] X.Org Server Extension : 7.0
[ 20349.371] (--) PCI:*(0:2:0:0) 10de:0640:0000:0000 rev 161, Mem @ 0xd2000000/16777216, 0xe0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 20349.371] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20349.371] Initializing built-in extension Generic Event Extension
[ 20349.371] Initializing built-in extension SHAPE
[ 20349.371] Initializing built-in extension MIT-SHM
[ 20349.371] Initializing built-in extension XInputExtension
[ 20349.371] Initializing built-in extension XTEST
[ 20349.371] Initializing built-in extension BIG-REQUESTS
[ 20349.371] Initializing built-in extension SYNC
[ 20349.371] Initializing built-in extension XKEYBOARD
[ 20349.371] Initializing built-in extension XC-MISC
[ 20349.371] Initializing built-in extension XINERAMA
[ 20349.371] Initializing built-in extension XFIXES
[ 20349.371] Initializing built-in extension RENDER
[ 20349.372] Initializing built-in extension RANDR
[ 20349.372] Initializing built-in extension COMPOSITE
[ 20349.372] Initializing built-in extension DAMAGE
[ 20349.372] Initializing built-in extension MIT-SCREEN-SAVER
[ 20349.372] Initializing built-in extension DOUBLE-BUFFER
[ 20349.372] Initializing built-in extension RECORD
[ 20349.372] Initializing built-in extension DPMS
[ 20349.372] Initializing built-in extension X-Resource
[ 20349.372] Initializing built-in extension XVideo
[ 20349.372] Initializing built-in extension XVideo-MotionCompensation
[ 20349.372] Initializing built-in extension XFree86-VidModeExtension
[ 20349.372] Initializing built-in extension XFree86-DGA
[ 20349.372] Initializing built-in extension XFree86-DRI
[ 20349.372] Initializing built-in extension DRI2
[ 20349.372] (II) LoadModule: "glx"
[ 20349.372] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 20349.383] (II) Module glx: vendor="NVIDIA Corporation"
[ 20349.383] compiled for 4.0.2, module version = 1.0.0
[ 20349.383] Module class: X.Org Server Extension
[ 20349.383] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
[ 20349.383] Loading extension GLX
[ 20349.383] (II) LoadModule: "nvidia"
[ 20349.384] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 20349.384] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20349.384] compiled for 4.0.2, module version = 1.0.0
[ 20349.384] Module class: X.Org Video Driver
[ 20349.384] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
[ 20349.384] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 20349.384] (++) using VT number 8

[ 20349.388] (II) Loading sub module "wfb"
[ 20349.388] (II) LoadModule: "wfb"
[ 20349.389] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 20349.389] (II) Module wfb: vendor="X.Org Foundation"
[ 20349.389] compiled for 1.13.1, module version = 1.0.0
[ 20349.389] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20349.389] (II) Loading sub module "ramdac"
[ 20349.389] (II) LoadModule: "ramdac"
[ 20349.389] (II) Module "ramdac" already built-in
[ 20349.389] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 20349.389] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 20349.389] (==) NVIDIA(0): RGB weight 888
[ 20349.389] (==) NVIDIA(0): Default visual is TrueColor
[ 20349.389] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20349.389] (**) NVIDIA(0): Enabling 2D acceleration
[ 20350.100] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 20350.100] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 20350.101] (II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
[ 20350.101] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 20350.101] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
[ 20350.101] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 20350.105] (--) NVIDIA(0): Valid display device(s) on GeForce 9500 GT at PCI:2:0:0
[ 20350.105] (--) NVIDIA(0): CRT-0
[ 20350.105] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (connected)
[ 20350.105] (--) NVIDIA(0): DFP-0
[ 20350.105] (--) NVIDIA(0): DFP-1
[ 20350.105] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 20350.105] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 20350.105] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 20350.105] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 20350.105] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 20350.105] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 20350.105] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20350.105] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 20350.105] (**) NVIDIA(0): has been enabled on all display devices.)
[ 20350.108] (II) NVIDIA(0): Validated MetaModes:
[ 20350.108] (II) NVIDIA(0): "CRT-1:1280x1024"
[ 20350.108] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 20350.138] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 20350.138] (--) NVIDIA(0): option
[ 20350.138] (--) Depth 24 pixmap format is 32 bpp
[ 20350.138] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 20350.148] (II) NVIDIA(0): Setting mode "CRT-1:1280x1024"
[ 20350.180] Loading extension NV-GLX
[ 20350.189] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20350.189] (==) NVIDIA(0): Backing store disabled
[ 20350.189] (==) NVIDIA(0): Silken mouse enabled
[ 20350.190] (**) NVIDIA(0): DPMS enabled
[ 20350.190] Loading extension NV-CONTROL
[ 20350.190] Loading extension XINERAMA
[ 20350.190] (WW) NVIDIA(0): Option "PreferredMode" is not used
[ 20350.190] (II) Loading sub module "dri2"
[ 20350.190] (II) LoadModule: "dri2"
[ 20350.190] (II) Module "dri2" already built-in
[ 20350.190] (II) NVIDIA(0): [DRI2] Setup complete
[ 20350.190] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20350.190] (--) RandR disabled
[ 20350.194] (II) Initializing extension GLX




xorg.conf
Quote:

Section "ServerLayout"
Identifier "k2"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

#Section "Files"
# ModulePath "/usr/lib/xorg/modules"
# FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/100dpi/"
# FontPath "/usr/share/fonts/75dpi/"
#EndSection

#Section "ServerFlags"
# Option "AutoAddDevices" "false"
#EndSection


Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Samsung740n"
VendorName "Samsung"
ModelName "740n"
Option "PreferredMode" "1280x1024"
HorizSync 30-81
VertRefresh 56-75
Option "DPMS"
EndSection

Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Samsung740n"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection



#Section "Module"
# Load "extmod"
# Disable "dri"
# Disable "dri2"
# Load "glx"
#EndSection
#
#Section "DRI"
# Mode 0666
#EndSection
#
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection

Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4563
Location: Saint Amant, Acadiana

PostPosted: Tue Jan 22, 2013 10:16 pm    Post subject: Reply with quote

Clean up your conf, leave just this:
Quote:
Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection

And try again.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
ssuominen
Developer
Developer


Joined: 30 Sep 2005
Posts: 2000
Location: Finland

PostPosted: Tue Jan 22, 2013 11:40 pm    Post subject: Reply with quote

Did you remember to recompile xf86-input-evdev and other drivers after udev upgrade like the postinst message of udev suggested?

Code:

# revdep-rebuild --library libudev.so.0


And previous comment about shorting the xorg.conf looks accurate too. It''s quite close what I'm using except I have twinview config on top of that.
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Wed Jan 23, 2013 12:04 am    Post subject: Reply with quote

Hi Guys,
Thanks for the tips. No love yet. Same results even with the almost empty xorg.conf file. X comes up, the KDE login screen is there. The keyboard & mouse are dead.

The log file is certainly cleaner and the warning about turning the mouse & keyboard off is gone, but unfortunately the mouse & keyboard are still dead in X. If I stop X via an ssh session then keyboard starts working again.

As for the revdep-rebuild I hoped that might be it but it didn't offer any clues. Seems everything was OK.

Could this have something to do with old udev rules being around somewhere? There's nothing much in /etc/udev/rules.d. Maybe somewhere else?

New data below.

Thanks,
Mark

Quote:

k2 ~ # cat /etc/X11/xorg.conf
Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection
k2 ~ #


Quote:

k2 ~ # revdep-rebuild --library libudev.so.0
* Configuring search environment for revdep-rebuild

* Checking reverse dependencies
* Packages containing binaries and libraries using libudev.so.0
* will be emerged.

* Collecting system binaries and libraries
* Generated new 1_files.rr
* Checking dynamic linking
[ 100% ]

* There are no dynamic links to libudev.so.0... All done.
k2 ~ #



Quote:

k2 ~ # cat /var/log/Xorg.0.log
[ 289.141]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 289.141] X Protocol Version 11, Revision 0
[ 289.141] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo
[ 289.141] Current Operating System: Linux k2 3.6.11-gentoo #17 SMP PREEMPT Mon Jan 21 16:51:58 PST 2013 x86_64
[ 289.141] Kernel command line: root=/dev/md126
[ 289.141] Build Date: 20 January 2013 07:42:51AM
[ 289.141]
[ 289.141] Current version of pixman: 0.28.0
[ 289.141] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 289.141] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 289.141] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 22 15:56:54 2013
[ 289.174] (==) Using config file: "/etc/X11/xorg.conf"
[ 289.174] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 289.180] (==) No Layout section. Using the first Screen section.
[ 289.180] (==) No screen section available. Using defaults.
[ 289.180] (**) |-->Screen "Default Screen Section" (0)
[ 289.180] (**) | |-->Monitor "<default monitor>"
[ 289.184] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 289.184] (**) | |-->Device "Card0"
[ 289.184] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 289.184] (==) Automatically adding devices
[ 289.184] (==) Automatically enabling devices
[ 289.184] (==) Automatically adding GPU devices
[ 289.221] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 289.221] Entry deleted from font path.
[ 289.221] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 289.221] Entry deleted from font path.
[ 289.237] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 289.237] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 289.237] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 289.247] (II) Loader magic: 0x807bc0
[ 289.247] (II) Module ABI versions:
[ 289.247] X.Org ANSI C Emulation: 0.4
[ 289.247] X.Org Video Driver: 13.1
[ 289.247] X.Org XInput driver : 18.0
[ 289.247] X.Org Server Extension : 7.0
[ 289.249] (--) PCI:*(0:2:0:0) 10de:0640:0000:0000 rev 161, Mem @ 0xd2000000/16777216, 0xe0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 289.249] (II) Open ACPI successful (/var/run/acpid.socket)
[ 289.270] Initializing built-in extension Generic Event Extension
[ 289.270] Initializing built-in extension SHAPE
[ 289.270] Initializing built-in extension MIT-SHM
[ 289.270] Initializing built-in extension XInputExtension
[ 289.270] Initializing built-in extension XTEST
[ 289.270] Initializing built-in extension BIG-REQUESTS
[ 289.270] Initializing built-in extension SYNC
[ 289.270] Initializing built-in extension XKEYBOARD
[ 289.270] Initializing built-in extension XC-MISC
[ 289.270] Initializing built-in extension XINERAMA
[ 289.270] Initializing built-in extension XFIXES
[ 289.270] Initializing built-in extension RENDER
[ 289.270] Initializing built-in extension RANDR
[ 289.270] Initializing built-in extension COMPOSITE
[ 289.270] Initializing built-in extension DAMAGE
[ 289.270] Initializing built-in extension MIT-SCREEN-SAVER
[ 289.270] Initializing built-in extension DOUBLE-BUFFER
[ 289.270] Initializing built-in extension RECORD
[ 289.270] Initializing built-in extension DPMS
[ 289.270] Initializing built-in extension X-Resource
[ 289.270] Initializing built-in extension XVideo
[ 289.270] Initializing built-in extension XVideo-MotionCompensation
[ 289.270] Initializing built-in extension XFree86-VidModeExtension
[ 289.270] Initializing built-in extension XFree86-DGA
[ 289.270] Initializing built-in extension XFree86-DRI
[ 289.270] Initializing built-in extension DRI2
[ 289.270] (II) LoadModule: "glx"
[ 289.331] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 289.922] (II) Module glx: vendor="NVIDIA Corporation"
[ 289.922] compiled for 4.0.2, module version = 1.0.0
[ 289.922] Module class: X.Org Server Extension
[ 289.922] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
[ 289.930] Loading extension GLX
[ 289.930] (II) LoadModule: "nvidia"
[ 289.972] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 290.064] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 290.064] compiled for 4.0.2, module version = 1.0.0
[ 290.064] Module class: X.Org Video Driver
[ 290.082] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
[ 290.082] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 290.082] (++) using VT number 7

[ 290.091] (II) Loading sub module "wfb"
[ 290.091] (II) LoadModule: "wfb"
[ 290.098] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 290.110] (II) Module wfb: vendor="X.Org Foundation"
[ 290.110] compiled for 1.13.1, module version = 1.0.0
[ 290.110] ABI class: X.Org ANSI C Emulation, version 0.4
[ 290.110] (II) Loading sub module "ramdac"
[ 290.110] (II) LoadModule: "ramdac"
[ 290.110] (II) Module "ramdac" already built-in
[ 290.111] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 290.111] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 290.111] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 290.111] (==) NVIDIA(0): RGB weight 888
[ 290.111] (==) NVIDIA(0): Default visual is TrueColor
[ 290.111] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 290.112] (**) NVIDIA(0): Enabling 2D acceleration
[ 290.871] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 290.871] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 290.872] (II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
[ 290.872] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 290.872] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
[ 290.872] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 290.877] (--) NVIDIA(0): Valid display device(s) on GeForce 9500 GT at PCI:2:0:0
[ 290.877] (--) NVIDIA(0): CRT-0
[ 290.877] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (connected)
[ 290.877] (--) NVIDIA(0): DFP-0
[ 290.877] (--) NVIDIA(0): DFP-1
[ 290.877] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 290.877] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 290.877] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 290.877] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 290.877] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 290.877] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 290.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 290.877] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 290.877] (**) NVIDIA(0): has been enabled on all display devices.)
[ 290.879] (==) NVIDIA(0):
[ 290.879] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 290.879] (==) NVIDIA(0): will be used as the requested mode.
[ 290.879] (==) NVIDIA(0):
[ 290.879] (II) NVIDIA(0): Validated MetaModes:
[ 290.879] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 290.879] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 290.906] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 290.906] (--) NVIDIA(0): option
[ 290.907] (--) Depth 24 pixmap format is 32 bpp
[ 290.907] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 290.916] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 290.952] Loading extension NV-GLX
[ 290.992] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 290.992] (==) NVIDIA(0): Backing store disabled
[ 290.992] (==) NVIDIA(0): Silken mouse enabled
[ 290.992] (==) NVIDIA(0): DPMS enabled
[ 290.992] Loading extension NV-CONTROL
[ 290.993] Loading extension XINERAMA
[ 290.993] (II) Loading sub module "dri2"
[ 290.993] (II) LoadModule: "dri2"
[ 290.993] (II) Module "dri2" already built-in
[ 290.993] (II) NVIDIA(0): [DRI2] Setup complete
[ 290.993] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 290.993] (--) RandR disabled
[ 290.998] (II) Initializing extension GLX
k2 ~ #
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4563
Location: Saint Amant, Acadiana

PostPosted: Wed Jan 23, 2013 12:17 am    Post subject: Reply with quote

Here's the checklist:

Is x11-drivers/xf86-input-evdev in your system?
With what USE flags xorg-server is compiled with?
Does your kernel support evdev?
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Wed Jan 23, 2013 1:07 am    Post subject: Reply with quote

Here's the answers:

Quote:

Is x11-drivers/xf86-input-evdev in your system?


k2 ~ # eix -I xf86-input-evdev
[I] x11-drivers/xf86-input-evdev
Available versions: 2.6.0 2.7.3{tbz2}
Installed versions: 2.7.3{tbz2}(16:54:03 01/21/13)
Homepage: http://xorg.freedesktop.org/
Description: Generic Linux input driver

k2 ~ #

Quote:

With what USE flags xorg-server is compiled with?


k2 ~ # emerge -pv xorg-server

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] x11-base/xorg-server-1.13.1 USE="nptl suid udev xorg -dmx -doc -ipv6 -kdrive -minimal (-selinux) -static-libs -tslib -xnest -xvfb" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB
k2 ~ #

Possibly you intended to ask about xorg-drivers also/instead?

k2 ~ # emerge -pv xorg-drivers

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] x11-base/xorg-drivers-1.13 INPUT_DEVICES="evdev -acecad -aiptek -elographics -fpit -hyperpen -joystick -keyboard -mouse -mutouch -penmount -synaptics -tslib -vmmouse -void -wacom" VIDEO_CARDS="nvidia -apm -ark -ast -chips -cirrus -dummy -epson -fbdev -fglrx (-geode) -glint -i128 (-i740) -intel -mach64 -mga -modesetting -neomagic (-newport) -nouveau -nv (-omap) (-omapfb) -qxl -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -via -virtualbox -vmware (-voodoo)" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB
k2 ~ #


Quote:

Does your kernel support evdev?


I believe it does:

k2 ~ # zcat /proc/config.gz | grep EVDEV
CONFIG_INPUT_EVDEV=y
k2 ~ #


One other communication comes to mind. This machine recently went through a profile change. My wife uses XFCE. When I use the machine I use KDE. The machine was originally built with the plain profile but over time developed some Alsa problems - some applications didn't have sound and I couldn't figure out why so to make it like the other 5 machine I look after I switched it to the KDE profile. This happened maybe a week or two before the udev update came out. Something like 150 packages were rebuilt. Possibly something that should have been rebuilt wasn't and that might possibly be effecting this? Long shot but I figured better to put it all out there.

Thanks,
Mark
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5270

PostPosted: Wed Jan 23, 2013 4:14 pm    Post subject: Reply with quote

Does 'udevadm info' on the event* nodes shows keyboard/mouse as correctly identified ?
Back to top
View user's profile Send private message
lakeroe
n00b
n00b


Joined: 14 Oct 2005
Posts: 7

PostPosted: Wed Jan 23, 2013 7:11 pm    Post subject: Reply with quote

I have exactly the same problem, but no solution yet ...
Back to top
View user's profile Send private message
ssuominen
Developer
Developer


Joined: 30 Sep 2005
Posts: 2000
Location: Finland

PostPosted: Wed Jan 23, 2013 7:34 pm    Post subject: Reply with quote

Maybe I'm blind but I haven't seen anyone post /proc/bus/input/devices output yet. Please do that. If you see your mouse there then `cat /dev/input/event<number>` and moving the mouse would cause garbage on the screen...

Code:

# cat /proc/bus/input/devices
# ls -l /dev/input/*


Then, does upgrading to latest xf86-input-evdev do any change? Using 2.6.0 or 2.7.3? Perhaps try to enable INPUT_DEVICES="evdev mouse keyboard". Then, dmesg output at the time of starting X.org, or boot? Perhaps even xf86-input-evdev driver from the x11 overlay so it's git version (assuming it's compatible with in-tree X.org server) if it really just seems to be about the driver.
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Wed Jan 23, 2013 9:04 pm    Post subject: Reply with quote

ssuominen wrote:
Maybe I'm blind but I haven't seen anyone post /proc/bus/input/devices output yet. Please do that. If you see your mouse there then `cat /dev/input/event<number>` and moving the mouse would cause garbage on the screen...

Code:

# cat /proc/bus/input/devices
# ls -l /dev/input/*


Then, does upgrading to latest xf86-input-evdev do any change? Using 2.6.0 or 2.7.3? Perhaps try to enable INPUT_DEVICES="evdev mouse keyboard". Then, dmesg output at the time of starting X.org, or boot? Perhaps even xf86-input-evdev driver from the x11 overlay so it's git version (assuming it's compatible with in-tree X.org server) if it really just seems to be about the driver.


Hi,
OK, right now my wife is using the keyboard on my Gentoo laptop so I'm just playing with the mouse part of it. What I see is the mouse is functioning whether X is started or not. However when X is started the pointer on the screen is not moving even though I'm getting USB events.

The stuff I'm pasting below shows 1) the machine with a clean boot and xdm never being started (it's off in rc-update), and then 2) xdm started. Both of these are from a ssh session:

Quote:

k2 ~ # cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0003 Vendor=045e Product=0084 Version=0110
N: Name="Microsoft Basic Optical Mouse"
P: Phys=usb-0000:00:1d.2-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10

k2 ~ # ls -l /dev/input/*
crw------- 1 root root 13, 64 Jan 23 12:37 /dev/input/event0
crw------- 1 root root 13, 65 Jan 23 12:37 /dev/input/event1
crw------- 1 root root 13, 66 Jan 23 12:37 /dev/input/event2
crw------- 1 root root 13, 63 Jan 23 12:37 /dev/input/mice
crw------- 1 root root 13, 32 Jan 23 12:37 /dev/input/mouse0
k2 ~ # cat /dev/input/event2
NQ������
NQ����� ����
NQ��
NQ �
NQ_5
NQ`5



Quote:

k2 ~ # /etc/init.d/xdm start
* Setting up kdm ... [ ok ]
k2 ~ # ls -l /dev/input/*
crw------- 1 root root 13, 64 Jan 23 12:37 /dev/input/event0
crw------- 1 root root 13, 65 Jan 23 12:37 /dev/input/event1
crw------- 1 root root 13, 66 Jan 23 12:37 /dev/input/event2
crw------- 1 root root 13, 63 Jan 23 12:37 /dev/input/mice
crw------- 1 root root 13, 32 Jan 23 12:37 /dev/input/mouse0
k2 ~ # cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0003 Vendor=045e Product=0084 Version=0110
N: Name="Microsoft Basic Optical Mouse"
P: Phys=usb-0000:00:1d.2-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10

k2 ~ # cat /dev/input/event2
tNQ�� tNQ�� tNQ�
tNQ�
tNQ6
tNQ6
tNQBU
tNQCU
tNQ�t
tNQ�t
tNQ�
tNQÓ
tNQ�
tNQ�
tNQ�


I'll try adding the older keyboard and mouse drivers to see what that does. I'll also report back later when my wife goes to work and I get the keyboard back. :)

Thanks,
Mark
Back to top
View user's profile Send private message
lakeroe
n00b
n00b


Joined: 14 Oct 2005
Posts: 7

PostPosted: Wed Jan 23, 2013 10:13 pm    Post subject: Reply with quote

I have exactly the same behavior as Mark describes in the post above.
As a temporary solution I downgraded to udev-171 and everything works fine.
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Wed Jan 23, 2013 11:43 pm    Post subject: Reply with quote

ssuominen wrote:

<SNIP>
Then, does upgrading to latest xf86-input-evdev do any change? Using 2.6.0 or 2.7.3? Perhaps try to enable INPUT_DEVICES="evdev mouse keyboard". Then, dmesg output at the time of starting X.org, or boot? Perhaps even xf86-input-evdev driver from the x11 overlay so it's git version (assuming it's compatible with in-tree X.org server) if it really just seems to be about the driver.


Keyboard now attached. Nothing different found so far.

Best I can tell, even if I switched to an overlay like x11, I think I'm already using the most up-to-date xf86-input-evdev driver that has a package number. I did an eix-remote update and then looked for newer versions but didn't find one other than the masked 9999. Not sure if that's the right way to go about it but I'm worried about updating all of X11. That said I'll consider it if I don't make headway.

Quote:

k2 ~ # eix xf86-input-evdev
[I] x11-drivers/xf86-input-evdev
Available versions: 2.6.0 2.7.3{tbz2} [M]~9999[3]
Installed versions: 2.7.3{tbz2}(16:54:03 01/21/13)
Homepage: http://xorg.freedesktop.org/
Description: Generic Linux input driver

[4] "x11" /var/lib/layman/x11
k2 ~ #


This does seem to be completely about the driver but I'm at a loss. Xorg.0.log shows no evidence of doing anything with the mouse & keyboard drivers. As a comparison I'm posting part of another machine's log file showing how it looks on a working machine.

Quote:

k2 ~ # cat /etc/X11/xorg.conf
#Section "ServerLayout"
# Identifier "Layout0"
# Screen 0 "Screen0" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
# Screen 2 "Screen2" RightOf "Screen1"
# InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "Mouse0" "CorePointer"
# Option "Xinerama" "1"
# Option "BlankTime" "30"
# Option "StandbyTime" "0"
# Option "SuspendTime" "0"
# Option "OffTime" "240"
#EndSection



Section "Device"
Identifier "Card0"
Driver "nvidia"
EndSection

#Section "InputDevice"
# # generated from data in "/etc/conf.d/gpm"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol"
# Option "Device" "/dev/input/mice"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
#EndSection
#
#Section "InputDevice"
# # generated from default
# Identifier "Keyboard0"
# Driver "kbd"
#EndSection

k2 ~ #





Quote:

k2 ~ # cat /var/log/Xorg.0.log
[ 1509.944]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 1509.944] X Protocol Version 11, Revision 0
[ 1509.944] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo
[ 1509.944] Current Operating System: Linux k2 3.6.11-gentoo #17 SMP PREEMPT Mon Jan 21 16:51:58 PST 2013 x86_64
[ 1509.944] Kernel command line: root=/dev/md126
[ 1509.944] Build Date: 20 January 2013 07:42:51AM
[ 1509.944]
[ 1509.944] Current version of pixman: 0.28.0
[ 1509.944] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1509.945] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1509.945] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 23 15:30:43 2013
[ 1509.945] (==) Using config file: "/etc/X11/xorg.conf"
[ 1509.945] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1509.945] (==) No Layout section. Using the first Screen section.
[ 1509.945] (==) No screen section available. Using defaults.
[ 1509.945] (**) |-->Screen "Default Screen Section" (0)
[ 1509.945] (**) | |-->Monitor "<default monitor>"
[ 1509.945] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1509.945] (**) | |-->Device "Card0"
[ 1509.945] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1509.945] (==) Automatically adding devices
[ 1509.945] (==) Automatically enabling devices
[ 1509.945] (==) Automatically adding GPU devices
[ 1509.945] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1509.945] Entry deleted from font path.
[ 1509.945] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1509.945] Entry deleted from font path.
[ 1509.945] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1509.945] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 1509.945] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1509.945] (II) Loader magic: 0x807bc0
[ 1509.945] (II) Module ABI versions:
[ 1509.945] X.Org ANSI C Emulation: 0.4
[ 1509.945] X.Org Video Driver: 13.1
[ 1509.945] X.Org XInput driver : 18.0
[ 1509.945] X.Org Server Extension : 7.0
[ 1509.948] (--) PCI:*(0:2:0:0) 10de:0640:0000:0000 rev 161, Mem @ 0xd2000000/16777216, 0xe0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 1509.948] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1509.948] Initializing built-in extension Generic Event Extension
[ 1509.948] Initializing built-in extension SHAPE
[ 1509.948] Initializing built-in extension MIT-SHM
[ 1509.948] Initializing built-in extension XInputExtension
[ 1509.948] Initializing built-in extension XTEST
[ 1509.948] Initializing built-in extension BIG-REQUESTS
[ 1509.948] Initializing built-in extension SYNC
[ 1509.948] Initializing built-in extension XKEYBOARD
[ 1509.948] Initializing built-in extension XC-MISC
[ 1509.948] Initializing built-in extension XINERAMA
[ 1509.948] Initializing built-in extension XFIXES
[ 1509.948] Initializing built-in extension RENDER
[ 1509.948] Initializing built-in extension RANDR
[ 1509.948] Initializing built-in extension COMPOSITE
[ 1509.948] Initializing built-in extension DAMAGE
[ 1509.948] Initializing built-in extension MIT-SCREEN-SAVER
[ 1509.948] Initializing built-in extension DOUBLE-BUFFER
[ 1509.948] Initializing built-in extension RECORD
[ 1509.948] Initializing built-in extension DPMS
[ 1509.948] Initializing built-in extension X-Resource
[ 1509.948] Initializing built-in extension XVideo
[ 1509.948] Initializing built-in extension XVideo-MotionCompensation
[ 1509.948] Initializing built-in extension XFree86-VidModeExtension
[ 1509.948] Initializing built-in extension XFree86-DGA
[ 1509.948] Initializing built-in extension XFree86-DRI
[ 1509.948] Initializing built-in extension DRI2
[ 1509.948] (II) LoadModule: "glx"
[ 1509.948] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1509.958] (II) Module glx: vendor="NVIDIA Corporation"
[ 1509.958] compiled for 4.0.2, module version = 1.0.0
[ 1509.958] Module class: X.Org Server Extension
[ 1509.958] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
[ 1509.958] Loading extension GLX
[ 1509.958] (II) LoadModule: "nvidia"
[ 1509.958] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 1509.958] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1509.958] compiled for 4.0.2, module version = 1.0.0
[ 1509.958] Module class: X.Org Video Driver
[ 1509.958] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
[ 1509.958] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1509.958] (++) using VT number 8

[ 1509.963] (II) Loading sub module "wfb"
[ 1509.963] (II) LoadModule: "wfb"
[ 1509.963] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 1509.963] (II) Module wfb: vendor="X.Org Foundation"
[ 1509.963] compiled for 1.13.1, module version = 1.0.0
[ 1509.963] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1509.963] (II) Loading sub module "ramdac"
[ 1509.963] (II) LoadModule: "ramdac"
[ 1509.963] (II) Module "ramdac" already built-in
[ 1509.963] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1509.964] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1509.964] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 1509.964] (==) NVIDIA(0): RGB weight 888
[ 1509.964] (==) NVIDIA(0): Default visual is TrueColor
[ 1509.964] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1509.964] (**) NVIDIA(0): Enabling 2D acceleration
[ 1510.677] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 1510.677] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 1510.679] (II) NVIDIA(0): NVIDIA GPU GeForce 9500 GT (G96) at PCI:2:0:0 (GPU-0)
[ 1510.679] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 1510.679] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.00
[ 1510.679] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1510.683] (--) NVIDIA(0): Valid display device(s) on GeForce 9500 GT at PCI:2:0:0
[ 1510.683] (--) NVIDIA(0): CRT-0
[ 1510.683] (--) NVIDIA(0): Samsung SyncMaster (CRT-1) (connected)
[ 1510.683] (--) NVIDIA(0): DFP-0
[ 1510.683] (--) NVIDIA(0): DFP-1
[ 1510.683] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 1510.683] (--) NVIDIA(0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 1510.683] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 1510.683] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 1510.683] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 1510.683] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 1510.683] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1510.683] (**) NVIDIA(0): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 1510.683] (**) NVIDIA(0): has been enabled on all display devices.)
[ 1510.685] (==) NVIDIA(0):
[ 1510.685] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 1510.685] (==) NVIDIA(0): will be used as the requested mode.
[ 1510.685] (==) NVIDIA(0):
[ 1510.685] (II) NVIDIA(0): Validated MetaModes:
[ 1510.685] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 1510.685] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 1510.716] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 1510.716] (--) NVIDIA(0): option
[ 1510.716] (--) Depth 24 pixmap format is 32 bpp
[ 1510.717] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 1510.725] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 1510.758] Loading extension NV-GLX
[ 1510.768] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1510.768] (==) NVIDIA(0): Backing store disabled
[ 1510.768] (==) NVIDIA(0): Silken mouse enabled
[ 1510.768] (==) NVIDIA(0): DPMS enabled
[ 1510.768] Loading extension NV-CONTROL
[ 1510.768] Loading extension XINERAMA
[ 1510.768] (II) Loading sub module "dri2"
[ 1510.768] (II) LoadModule: "dri2"
[ 1510.768] (II) Module "dri2" already built-in
[ 1510.768] (II) NVIDIA(0): [DRI2] Setup complete
[ 1510.768] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1510.768] (--) RandR disabled
[ 1510.772] (II) Initializing extension GLX
k2 ~ #



From a different working machine:

Quote:

c2stable ~ # cat /var/log/Xorg.0.log
[ 18.068]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 18.068] X Protocol Version 11, Revision 0
[ 18.068] Build Operating System: Linux 3.6.11-gentoo x86_64 Gentoo
[ 18.068] Current Operating System: Linux c2stable 3.6.11-gentoo #6 SMP PREEMPT Tue Jan 1 14:01:57 PST 2013 x86_64
[ 18.068] Kernel command line: root=/dev/md126 video=vesafb vga=0x307
[ 18.068] Build Date: 19 January 2013 01:12:34PM
[ 18.068]
[ 18.068] Current version of pixman: 0.28.0
[ 18.068] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.068] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.068] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 23 05:48:23 2013
[ 18.133] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.133] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.149] (==) ServerLayout "Layout0"
[ 18.149] (**) |-->Screen "Screen0" (0)
[ 18.149] (**) | |-->Monitor "Monitor0"
[ 18.154] (**) | |-->Device "Device0"
[ 18.154] (**) |-->Screen "Screen1" (1)
[ 18.154] (**) | |-->Monitor "Monitor1"
[ 18.154] (**) | |-->Device "Device1"
[ 18.154] (**) |-->Screen "Screen2" (2)
[ 18.154] (**) | |-->Monitor "Monitor2"
[ 18.154] (**) | |-->Device "Device2"
[ 18.154] (**) |-->Input Device "Keyboard0"
[ 18.154] (**) |-->Input Device "Mouse0"
[ 18.154] (**) Option "BlankTime" "30"
[ 18.154] (**) Option "StandbyTime" "0"
[ 18.154] (**) Option "SuspendTime" "0"
[ 18.154] (**) Option "OffTime" "240"
[ 18.154] (**) Option "Xinerama" "1"
[ 18.154] (==) Automatically adding devices
[ 18.154] (==) Automatically enabling devices
[ 18.154] (==) Automatically adding GPU devices
[ 18.154] (**) Xinerama: enabled
[ 18.159] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 18.159] Entry deleted from font path.
[ 18.159] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 18.159] Entry deleted from font path.
[ 18.161] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 18.161] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 18.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 18.161] (WW) Disabling Keyboard0
[ 18.161] (WW) Disabling Mouse0
[ 18.165] (II) Loader magic: 0x80cbc0
[ 18.165] (II) Module ABI versions:
[ 18.165] X.Org ANSI C Emulation: 0.4
[ 18.165] X.Org Video Driver: 13.1
[ 18.165] X.Org XInput driver : 18.0
[ 18.165] X.Org Server Extension : 7.0
[ 18.167] (--) PCI:*(0:2:0:0) 10de:06c4:3842:1467 rev 163, Mem @ 0xf6000000/33554432, 0xc0000000/134217728, 0xc8000000/67108864, I/O @ 0x00007c00/128, BIOS @ 0x????????/524288
[ 18.167] (--) PCI: (0:4:0:0) 10de:10c3:3842:1301 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/524288
[ 18.167] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.177] Initializing built-in extension Generic Event Extension
[ 18.178] Initializing built-in extension SHAPE
[ 18.178] Initializing built-in extension MIT-SHM
[ 18.178] Initializing built-in extension XInputExtension
[ 18.178] Initializing built-in extension XTEST
[ 18.178] Initializing built-in extension BIG-REQUESTS
[ 18.178] Initializing built-in extension SYNC
[ 18.178] Initializing built-in extension XKEYBOARD
[ 18.178] Initializing built-in extension XC-MISC
[ 18.178] Initializing built-in extension XINERAMA
[ 18.178] Initializing built-in extension XFIXES
[ 18.178] Initializing built-in extension RENDER
[ 18.178] Initializing built-in extension RANDR
[ 18.178] Initializing built-in extension COMPOSITE
[ 18.178] Initializing built-in extension DAMAGE
[ 18.178] Initializing built-in extension MIT-SCREEN-SAVER
[ 18.178] Initializing built-in extension DOUBLE-BUFFER
[ 18.178] Initializing built-in extension RECORD
[ 18.178] Initializing built-in extension DPMS
[ 18.178] Initializing built-in extension X-Resource
[ 18.178] Initializing built-in extension XVideo
[ 18.178] Initializing built-in extension XVideo-MotionCompensation
[ 18.178] Initializing built-in extension XFree86-VidModeExtension
[ 18.178] Initializing built-in extension XFree86-DGA
[ 18.178] Initializing built-in extension XFree86-DRI
[ 18.178] Initializing built-in extension DRI2
[ 18.178] (II) LoadModule: "glx"
[ 18.294] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 19.089] (II) Module glx: vendor="NVIDIA Corporation"
[ 19.089] compiled for 4.0.2, module version = 1.0.0
[ 19.089] Module class: X.Org Server Extension
[ 19.089] (II) NVIDIA GLX Module 313.18 Wed Jan 9 15:34:35 PST 2013
[ 19.102] Loading extension GLX
[ 19.102] (II) LoadModule: "nvidia"
[ 19.102] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 19.274] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 19.274] compiled for 4.0.2, module version = 1.0.0
[ 19.274] Module class: X.Org Video Driver
[ 19.313] (II) NVIDIA dlloader X Driver 313.18 Wed Jan 9 15:15:26 PST 2013
[ 19.313] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 19.314] (++) using VT number 7

[ 19.356] (II) Loading sub module "wfb"
[ 19.356] (II) LoadModule: "wfb"
[ 19.356] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 19.368] (II) Module wfb: vendor="X.Org Foundation"
[ 19.368] compiled for 1.13.1, module version = 1.0.0
[ 19.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.368] (II) Loading sub module "ramdac"
[ 19.368] (II) LoadModule: "ramdac"
[ 19.368] (II) Module "ramdac" already built-in
[ 19.369] (WW) NVIDIA: The Composite and Xinerama extensions are both enabled, which
[ 19.369] (WW) NVIDIA: is an unsupported configuration. The driver will continue
[ 19.369] (WW) NVIDIA: to load, but may behave strangely.
[ 19.369] (WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
[ 19.369] (WW) NVIDIA: X server.
[ 19.370] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 19.370] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 19.370] (==) NVIDIA(0): RGB weight 888
[ 19.370] (==) NVIDIA(0): Default visual is TrueColor
[ 19.370] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.370] (**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1080 +0+0"
[ 19.370] (**) NVIDIA(1): Option "MetaModes" "DFP-2: 1920x1080 +0+0"
[ 19.370] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.880] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[ 19.880] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 19.910] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-2)) does not support NVIDIA
[ 19.910] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 19.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 465 (GF100) at PCI:2:0:0 (GPU-0)
[ 19.911] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 19.911] (--) NVIDIA(0): VideoBIOS: 70.00.35.00.60
[ 19.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.912] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 465 at PCI:2:0:0
[ 19.912] (--) NVIDIA(0): CRT-0
[ 19.912] (--) NVIDIA(0): CRT-1
[ 19.912] (--) NVIDIA(0): Samsung SyncMaster (DFP-0) (connected)
[ 19.912] (--) NVIDIA(0): DFP-1
[ 19.912] (--) NVIDIA(0): Samsung SyncMaster (DFP-2) (connected)
[ 19.912] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 19.912] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 19.912] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 19.912] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 19.912] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 19.912] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 19.912] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): 330.0 MHz maximum pixel clock
[ 19.912] (--) NVIDIA(0): Samsung SyncMaster (DFP-2): Internal Dual Link TMDS
[ 19.912] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.913] (**) NVIDIA(0): device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[ 19.913] (**) NVIDIA(0): has been enabled on all display devices.)
[ 19.913] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 19.913] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 19.913] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 19.913] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 19.913] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 19.913] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 19.913] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 19.913] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 19.913] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 19.913] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 19.913] (WW) NVIDIA(GPU-0): The EDID for Samsung SyncMaster (DFP-0) contradicts itself:
[ 19.913] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 19.913] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 19.913] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 19.913] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 19.914] (II) NVIDIA(0): Validated MetaModes:
[ 19.914] (II) NVIDIA(0): "DFP-0:1920x1080+0+0"
[ 19.914] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 19.942] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 19.942] (--) NVIDIA(0): option
[ 19.942] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
[ 19.942] (WW) NVIDIA(0): Xinerama extension.
[ 19.942] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[ 19.942] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 19.942] (==) NVIDIA(1): RGB weight 888
[ 19.942] (==) NVIDIA(1): Default visual is TrueColor
[ 19.942] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 19.942] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 465 (GF100) at PCI:2:0:0 (GPU-0)
[ 19.942] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 19.942] (--) NVIDIA(1): VideoBIOS: 70.00.35.00.60
[ 19.942] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 19.943] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 465 at PCI:2:0:0
[ 19.943] (--) NVIDIA(1): CRT-0
[ 19.943] (--) NVIDIA(1): CRT-1
[ 19.943] (--) NVIDIA(1): Samsung SyncMaster (DFP-0) (connected)
[ 19.943] (--) NVIDIA(1): DFP-1
[ 19.944] (--) NVIDIA(1): Samsung SyncMaster (DFP-2) (connected)
[ 19.944] (--) NVIDIA(1): CRT-0: 400.0 MHz maximum pixel clock
[ 19.944] (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
[ 19.944] (--) NVIDIA(1): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 19.944] (--) NVIDIA(1): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[ 19.944] (--) NVIDIA(1): DFP-1: 165.0 MHz maximum pixel clock
[ 19.944] (--) NVIDIA(1): DFP-1: Internal Single Link TMDS
[ 19.944] (--) NVIDIA(1): Samsung SyncMaster (DFP-2): 330.0 MHz maximum pixel clock
[ 19.944] (--) NVIDIA(1): Samsung SyncMaster (DFP-2): Internal Dual Link TMDS
[ 19.944] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.944] (**) NVIDIA(1): device Samsung SyncMaster (DFP-2) (Using EDID frequencies
[ 19.944] (**) NVIDIA(1): has been enabled on all display devices.)
[ 19.944] (II) NVIDIA(1): Validated MetaModes:
[ 19.944] (II) NVIDIA(1): "DFP-2:1920x1080+0+0"
[ 19.944] (II) NVIDIA(1): Virtual screen size determined to be 1920 x 1080
[ 19.958] (--) NVIDIA(1): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 19.958] (--) NVIDIA(1): option
[ 19.958] (WW) NVIDIA(1): 32-bit ARGB GLX visuals are not currently supported with the
[ 19.958] (WW) NVIDIA(1): Xinerama extension.
[ 19.958] (WW) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
[ 19.958] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[ 19.958] (==) NVIDIA(2): RGB weight 888
[ 19.958] (==) NVIDIA(2): Default visual is TrueColor
[ 19.958] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[ 19.958] (**) NVIDIA(2): Option "MetaModes" "1280x1024 +0+0"
[ 19.958] (**) NVIDIA(2): Enabling 2D acceleration
[ 20.197] (II) NVIDIA(GPU-1): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[ 20.197] (II) NVIDIA(GPU-1): 3D Vision stereo.
[ 20.198] (II) NVIDIA(2): NVIDIA GPU GeForce 8400GS (GT218) at PCI:4:0:0 (GPU-1)
[ 20.198] (--) NVIDIA(2): Memory: 524288 kBytes
[ 20.198] (--) NVIDIA(2): VideoBIOS: 70.18.5f.00.00
[ 20.198] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[ 20.206] (--) NVIDIA(2): Valid display device(s) on GeForce 8400GS at PCI:4:0:0
[ 20.206] (--) NVIDIA(2): CRT-0
[ 20.206] (--) NVIDIA(2): Samsung SyncMaster (CRT-1) (connected)
[ 20.206] (--) NVIDIA(2): DFP-0
[ 20.206] (--) NVIDIA(2): DFP-1
[ 20.206] (--) NVIDIA(2): CRT-0: 400.0 MHz maximum pixel clock
[ 20.206] (--) NVIDIA(2): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[ 20.206] (--) NVIDIA(2): DFP-0: 330.0 MHz maximum pixel clock
[ 20.206] (--) NVIDIA(2): DFP-0: Internal Single Link TMDS
[ 20.206] (--) NVIDIA(2): DFP-1: 165.0 MHz maximum pixel clock
[ 20.206] (--) NVIDIA(2): DFP-1: Internal Single Link TMDS
[ 20.206] (**) NVIDIA(2): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20.206] (**) NVIDIA(2): device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[ 20.206] (**) NVIDIA(2): has been enabled on all display devices.)
[ 20.210] (II) NVIDIA(2): Validated MetaModes:
[ 20.210] (II) NVIDIA(2): "1280x1024+0+0"
[ 20.210] (II) NVIDIA(2): Virtual screen size determined to be 1280 x 1024
[ 20.219] (--) NVIDIA(2): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 20.219] (--) NVIDIA(2): option
[ 20.219] (WW) NVIDIA(2): 32-bit ARGB GLX visuals are not currently supported with the
[ 20.219] (WW) NVIDIA(2): Xinerama extension.
[ 20.219] (WW) NVIDIA(2): Disabling 32-bit ARGB GLX visuals.
[ 20.219] (--) Depth 24 pixmap format is 32 bpp
[ 20.219] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 20.219] (II) NVIDIA: access.
[ 20.227] (II) NVIDIA(0): Setting mode "DFP-0:1920x1080+0+0"
[ 20.273] Loading extension NV-GLX
[ 20.345] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.345] (==) NVIDIA(0): Backing store disabled
[ 20.345] (==) NVIDIA(0): Silken mouse enabled
[ 20.346] (**) NVIDIA(0): DPMS enabled
[ 20.346] Loading extension NV-CONTROL
[ 20.346] (WW) NVIDIA(0): Option "TwinView" is not used
[ 20.346] (II) Loading sub module "dri2"
[ 20.346] (II) LoadModule: "dri2"
[ 20.346] (II) Module "dri2" already built-in
[ 20.346] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.346] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.346] (WW) NVIDIA(0): Not registering RandR
[ 20.346] (==) RandR enabled
[ 20.351] (II) NVIDIA(1): Setting mode "DFP-2:1920x1080+0+0"
[ 20.466] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 20.466] (==) NVIDIA(1): Backing store disabled
[ 20.466] (==) NVIDIA(1): Silken mouse enabled
[ 20.466] (**) NVIDIA(1): DPMS enabled
[ 20.466] (WW) NVIDIA(1): Option "TwinView" is not used
[ 20.466] (II) Loading sub module "dri2"
[ 20.466] (II) LoadModule: "dri2"
[ 20.466] (II) Module "dri2" already built-in
[ 20.466] (II) NVIDIA(1): [DRI2] Setup complete
[ 20.466] (II) NVIDIA(1): [DRI2] VDPAU driver: nvidia
[ 20.466] (WW) NVIDIA(1): Not registering RandR
[ 20.466] (==) RandR enabled
[ 20.481] (II) NVIDIA(2): Setting mode "1280x1024+0+0"
[ 20.514] (WW) NVIDIA(2): The GPU driving screen 2 is incompatible with the rest of the
[ 20.514] (WW) NVIDIA(2): GPUs composing the desktop. OpenGL rendering will be
[ 20.514] (WW) NVIDIA(2): disabled on screen 2.
[ 20.519] (==) NVIDIA(2): Disabling shared memory pixmaps
[ 20.519] (==) NVIDIA(2): Backing store disabled
[ 20.519] (==) NVIDIA(2): Silken mouse enabled
[ 20.519] (**) NVIDIA(2): DPMS enabled
[ 20.519] (WW) NVIDIA(2): Option "TwinView" is not used
[ 20.519] (II) Loading sub module "dri2"
[ 20.519] (II) LoadModule: "dri2"
[ 20.519] (II) Module "dri2" already built-in
[ 20.519] (II) NVIDIA(2): [DRI2] Setup complete
[ 20.519] (II) NVIDIA(2): [DRI2] VDPAU driver: nvidia
[ 20.519] (WW) NVIDIA(2): Not registering RandR
[ 20.519] (==) RandR enabled
[ 20.523] (II) Initializing extension GLX
[ 20.949] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 20.949] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.949] (II) LoadModule: "evdev"
[ 20.965] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.000] (II) Module evdev: vendor="X.Org Foundation"
[ 21.000] compiled for 1.13.1, module version = 2.7.3
[ 21.000] Module class: X.Org XInput Driver
[ 21.000] ABI class: X.Org XInput driver, version 18.0
[ 21.000] (II) Using input driver 'evdev' for 'Power Button'
[ 21.000] (**) Power Button: always reports core events
[ 21.000] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 21.000] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.000] (--) evdev: Power Button: Found keys
[ 21.000] (II) evdev: Power Button: Configuring as keyboard
[ 21.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 21.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.000] (**) Option "xkb_rules" "evdev"
[ 21.000] (**) Option "xkb_model" "evdev"
[ 21.000] (**) Option "xkb_layout" "us"
[ 21.014] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.014] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.014] (II) Using input driver 'evdev' for 'Power Button'
[ 21.014] (**) Power Button: always reports core events
[ 21.014] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 21.014] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.014] (--) evdev: Power Button: Found keys
[ 21.014] (II) evdev: Power Button: Configuring as keyboard
[ 21.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 21.014] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.014] (**) Option "xkb_rules" "evdev"
[ 21.014] (**) Option "xkb_model" "evdev"
[ 21.014] (**) Option "xkb_layout" "us"
[ 21.015] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event3)
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 21.015] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 21.015] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event3"
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x39
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 21.015] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 21.015] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 21.015] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 21.015] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.015] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3/event3"
[ 21.015] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
[ 21.015] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 21.015] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 21.015] (II) No input driver specified, ignoring this device.
[ 21.015] (II) This device may have been added with another device file.
[ 21.015] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 21.015] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.015] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.015] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.015] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 21.015] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.015] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.015] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.015] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 21.015] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 21.015] (**) Option "xkb_rules" "evdev"
[ 21.015] (**) Option "xkb_model" "evdev"
[ 21.015] (**) Option "xkb_layout" "us"
c2stable ~ #



Just a couple more observations before I go bug-eyed:

On the machine that's working, and which does use an xorg.conf file, I'm getting the warning about disabling keyboard and mouse, just like the original Xorg.0.log on the machine that fails. Maybe I should go back to using an xorg.conf file as it appears this is truly just a warning:

Quote:

[ 18.161] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 18.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 18.161] (WW) Disabling Keyboard0
[ 18.161] (WW) Disabling Mouse0



While the log files aren't, and cannot be, identical, they are quite similar down to the end of the non-working machine:

Quote:

[ 1510.768] (II) NVIDIA(0): [DRI2] Setup complete
[ 1510.768] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1510.768] (--) RandR disabled
[ 1510.772] (II) Initializing extension GLX


vs the working machine:

Quote:

[ 20.519] (II) NVIDIA(2): [DRI2] Setup complete
[ 20.519] (II) NVIDIA(2): [DRI2] VDPAU driver: nvidia
[ 20.519] (WW) NVIDIA(2): Not registering RandR
[ 20.519] (==) RandR enabled
[ 20.523] (II) Initializing extension GLX
[ 20.949] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 20.949] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.949] (II) LoadModule: "evdev"
[ 20.965] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.000] (II) Module evdev: vendor="X.Org Foundation"
[ 21.000] compiled for 1.13.1, module version = 2.7.3
[ 21.000] Module class: X.Org XInput Driver
[ 21.000] ABI class: X.Org XInput driver, version 18.0
[ 21.000] (II) Using input driver 'evdev' for 'Power Button'
[ 21.000] (**) Power Button: always reports core events
[ 21.000] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 21.000] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.000] (--) evdev: Power Button: Found keys
[ 21.000] (II) evdev: Power Button: Configuring as keyboard
[ 21.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 21.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.000] (**) Option "xkb_rules" "evdev"
[ 21.000] (**) Option "xkb_model" "evdev"
[ 21.000] (**) Option "xkb_layout" "us"
[ 21.014] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 21.014] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.014] (II) Using input driver 'evdev' for 'Power Button'
[ 21.014] (**) Power Button: always reports core events
[ 21.014] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 21.014] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.014] (--) evdev: Power Button: Found keys
[ 21.014] (II) evdev: Power Button: Configuring as keyboard
[ 21.014] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 21.014] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.014] (**) Option "xkb_rules" "evdev"
[ 21.014] (**) Option "xkb_model" "evdev"
[ 21.014] (**) Option "xkb_layout" "us"
[ 21.015] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event3)
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 21.015] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 21.015] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event3"
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x39
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 21.015] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 21.015] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 21.015] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 21.015] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 21.015] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.015] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3/event3"
[ 21.015] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
[ 21.015] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 21.015] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 21.015] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 21.015] (II) No input driver specified, ignoring this device.
[ 21.015] (II) This device may have been added with another device file.
[ 21.015] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 21.015] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.015] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.015] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.015] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 21.015] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.015] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.015] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.015] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 21.015] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 21.015] (**) Option "xkb_rules" "evdev"
[ 21.015] (**) Option "xkb_model" "evdev"
[ 21.015] (**) Option "xkb_layout" "us"
c2stable ~ #

Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Wed Jan 23, 2013 11:48 pm    Post subject: Reply with quote

lakeroe wrote:
I have exactly the same behavior as Mark describes in the post above.
As a temporary solution I downgraded to udev-171 and everything works fine.


lakeroe - Could you please post whatever steps you believe you took to downgrade? What did you mask?

I might try this just to duplicate your results and then try to get an xorg.conf file back in place that's known to work, then go back to udev-197 and see if it fails again.

Seems like if we both have this problem a bug should be filed but I don't think I have the right files on this machine anymore to file a good bug.

Thanks in advance!
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Thu Jan 24, 2013 12:23 am    Post subject: Reply with quote

One other thing I'd like anyone to check is that these devtmpfs options are consistent with what you all are doing with this newer udev:

Quote:

c2stable ~ # zcat /proc/config.gz | grep DEVTMP
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
c2stable ~ #


It's set this way on both working and failing machines here but I was unclear which the gentoo-devs really intended for the second one.

NOTE: All of my machines are using an initramfs built into the kernel so I don't think it's supposed to matter in my case...

Thanks,
Mark
Back to top
View user's profile Send private message
lakeroe
n00b
n00b


Joined: 14 Oct 2005
Posts: 7

PostPosted: Thu Jan 24, 2013 8:34 am    Post subject: Reply with quote

Hello Mark,

as far as I remember I just added
>=virtual/udev-197 in package.mask
and did an
emerge -vutDN world.
Then I did
revdep-rebuild
rc-update add udev sysinit
rc-update add udev-mount sysinit
rc-update add udev-postmount default
and a reboot.
Back to top
View user's profile Send private message
VoidMage
Watchman
Watchman


Joined: 14 Oct 2006
Posts: 5270

PostPosted: Thu Jan 24, 2013 9:02 am    Post subject: Reply with quote

Once again, what does 'udevadm info' print for the event* device nodes with udev 197, cause it seems (going by your Xorg log), that for some reason keyboard/mouse aren't getting tagged.
Back to top
View user's profile Send private message
ssuominen
Developer
Developer


Joined: 30 Sep 2005
Posts: 2000
Location: Finland

PostPosted: Thu Jan 24, 2013 12:28 pm    Post subject: Reply with quote

VoidMage wrote:
Once again, what does 'udevadm info' print for the event* device nodes with udev 197, cause it seems (going by your Xorg log), that for some reason keyboard/mouse aren't getting tagged.


Most of my questions are still unanswered too. A bit frustrating, but oh well.
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Thu Jan 24, 2013 2:16 pm    Post subject: Reply with quote

VoidMage wrote:
Does 'udevadm info' on the event* nodes shows keyboard/mouse as correctly identified ?


Sorry. It was end of the day yesterday and I needed to figure out what you were asking me to do. Hopefully this is what you wanted to see. If you need more or I did this wrong please let me know what you want.

OK, the machine has booted, xdm has not yet started. Here's the udevadm info results:

Quote:

k2 ~ # cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0003 Vendor=045e Product=0084 Version=0110
N: Name="Microsoft Basic Optical Mouse"
P: Phys=usb-0000:00:1d.2-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0003 Vendor=047b Product=0011 Version=0100
N: Name="Silitek Standard USB Keyboard "
P: Phys=usb-0000:00:1d.1-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event3
B: PROP=0
B: EV=120013
B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

k2 ~ # ls /dev/input/event*
/dev/input/event0 /dev/input/event1 /dev/input/event2 /dev/input/event3
k2 ~ # ls -l /dev/input/event*
crw------- 1 root root 13, 64 Jan 24 05:44 /dev/input/event0
crw------- 1 root root 13, 65 Jan 24 05:44 /dev/input/event1
crw------- 1 root root 13, 66 Jan 24 05:44 /dev/input/event2
crw------- 1 root root 13, 67 Jan 24 06:06 /dev/input/event3
k2 ~ # udevadm info /dev/input/event2
P: /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input

k2 ~ # udevadm info /dev/input/event3
P: /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4/event3
N: input/event3
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4/event3
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input

k2 ~ #



I now start xdm and get the data again:

Quote:

k2 ~ # /etc/init.d/xdm status
* status: stopped
k2 ~ # /etc/init.d/xdm start
* Setting up kdm ... [ ok ]
k2 ~ # udevadm info /dev/input/event2
P: /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input

k2 ~ # udevadm info /dev/input/event3
P: /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4/event3
N: input/event3
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input4/event3
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input

k2 ~ #
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Thu Jan 24, 2013 2:28 pm    Post subject: Reply with quote

ssuominen wrote:
VoidMage wrote:
Once again, what does 'udevadm info' print for the event* device nodes with udev 197, cause it seems (going by your Xorg log), that for some reason keyboard/mouse aren't getting tagged.


Most of my questions are still unanswered too. A bit frustrating, but oh well.



I'm very sorry but rereading above I thought I'd gotten you what asked for yesterday but it looks like I missed the dmesg part. Other than that everything below is what I said yesterday and did for a second time today. I'll add the dmesg stuff at the very end.

Quote:

Maybe I'm blind but I haven't seen anyone post /proc/bus/input/devices output yet. Please do that. If you see your mouse there then `cat /dev/input/event<number>` and moving the mouse would cause garbage on the screen...

Code:

# cat /proc/bus/input/devices
# ls -l /dev/input/*


Then, does upgrading to latest xf86-input-evdev do any change? Using 2.6.0 or 2.7.3? Perhaps try to enable INPUT_DEVICES="evdev mouse keyboard". Then, dmesg output at the time of starting X.org, or boot? Perhaps even xf86-input-evdev driver from the x11 overlay so it's git version (assuming it's compatible with in-tree X.org server) if it really just seems to be about the driver.



1) the two CLI questions were answered yesterday and and again this morning in the post just before this one.

2) I am upgraded to the latest xf86-input-evdev-2.7.3 already.

3) I tried adding INPUT_DEVICES="evdev mouse keyboard" to /etc/portage/make.conf. It emerged the two drivers but I saw no changes. For now I've left them in.

Quote:

k2 ~ # cat /etc/portage/make.conf
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -march=native -pipe"
#Safe CFlags for the Core-i7, saved for reference
#CFLAGS="-march=core2 -msse4 -mcx16 -msahf -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
#USE="a52 aac acpi alsa cairo caps cdda cddb cdparanoia cdr dts dvd dvdr ffmpeg flac fltk ftp gnome ipod ios java jpeg kde lame ladspa lame lash libsamplerate mad mmx mng mp3 mp4 mpeg musepack ogg semantic-desktop sse sse2 ssse3 sse4 tifftruetype vorbis xine xv xvid vmware -bluetooth -esound -timidity -cups -gdbm -hal -ipv6 X gtk qt3support png consolekit opengl"

USE="gstreamer java jpeg2k ssse3 xinerama truetype type1 cleartype corefonts vdpau xvmc -bluetooth -cups -ipv6"

GENTOO_MIRRORS="http://gentoo.osuosl.org/"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"

FEATURES="buildpkg"

EMERGE_DEFAULT_OPTS="--with-bdeps=y --jobs=5"
MAKEOPTS="-j16 -l6"
PORTAGE_NICENESS=5
PORTAGE_IONICE_COMMAND="ionice -c 3 -p \${PID}"

VIDEO_CARDS="nvidia"
INPUT_DEVICES="evdev keyboard mouse"
ALSA_CARDS="hda-intel"
LINGUAS="en"
ACCEPT_LICENSE="dlj-1.1 PUEL AdobeFlash-10.3 google-chrome"

source /var/lib/layman/make.conf
k2 ~ #


4) I added the x11 overlay but it didn't want to emerge anything new. Everything higher is masked.


OK, dmesg output before starting xdm:

Quote:

k2 ~ # dmesg
[ 0.000000] Linux version 3.6.11-gentoo (root@k2) (gcc version 4.6.3 (Gentoo 4.6.3 p1.10, pie-0.5.2) ) #17 SMP PREEMPT Mon Jan 21 16:51:58 PST 2013
[ 0.000000] Command line: root=/dev/md126
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf4bcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf4bd000-0x00000000cf4befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf4bf000-0x00000000cf4c3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf4c4000-0x00000000cf7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf7bf000-0x00000000cf7defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf7df000-0x00000000cf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fcffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: /DX58SO, BIOS SOX5810J.86A.4405.2009.1020.1419 10/20/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FE0000000 write-back
[ 0.000000] 5 base 1A0000000 mask FF0000000 write-back
[ 0.000000] 6 base 0FFFF0000 mask FFFFF0000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcf7fffff]
[ 0.000000] [mem 0x00000000-0xcf7fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xcf7fffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1afffffff]
[ 0.000000] [mem 0x100000000-0x1afffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1afffffff @ [mem 0xcf7db000-0xcf7defff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 00000000cf7fe120 00074 (v01 INTEL DX58SO 00001135 01000013)
[ 0.000000] ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000450/0x0 (20120711/tbfadt-598)
[ 0.000000] ACPI BIOS Bug: Warning: Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20120711/tbfadt-648)
[ 0.000000] ACPI: DSDT 00000000cf7f8000 04641 (v02 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000cf728000 00040
[ 0.000000] ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 00000000cf7e2000 0E134 (v01 INTEL SSDT PM 00001135 MSFT 0100000D)
[ 0.000000] ACPI: DMAR 00000000cf7df000 00140 (v01 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: WDTT 00000000cf7f1000 0020C (v02 INTEL DX58SO 00001135 MSFT 0100000D)
[ 0.000000] ACPI: ASPT 00000000cf7f2000 00034 (v04 INTEL PerfTune 00001135 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff8801a9600000-ffff8801aebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1afffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xcf4bcfff]
[ 0.000000] node 0: [mem 0xcf4bf000-0xcf4c3fff]
[ 0.000000] node 0: [mem 0xcf7bf000-0xcf7defff]
[ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1afffffff]
[ 0.000000] On node 0 totalpages: 1569903
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 830747 pages, LIFO batch:31
[ 0.000000] Normal zone: 9856 pages used for memmap
[ 0.000000] Normal zone: 711040 pages, LIFO batch:31
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff8801afc00000 s72832 r8192 d21376 u262144
[ 0.000000] pcpu-alloc: s72832 r8192 d21376 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1545705
[ 0.000000] Kernel command line: root=/dev/md126
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 6098948k/7077888k available (4156k kernel code, 798276k absent, 180664k reserved, 4437k data, 3932k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2666.643 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.28 BogoMIPS (lpj=2666643)
[ 0.000452] pid_max: default: 32768 minimum: 301
[ 0.000693] Security Framework initialized
[ 0.000920] Mount-cache hash table entries: 256
[ 0.001285] CPU: Physical Processor ID: 0
[ 0.001513] CPU: Processor Core ID: 0
[ 0.001733] mce: CPU supports 9 MCE banks
[ 0.001959] CPU0: Thermal monitoring enabled (TM1)
[ 0.002184] process: using mwait in idle threads
[ 0.002405] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.002405] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002405] tlb_flushall_shift is 0x6
[ 0.003080] Freeing SMP alternatives: 20k freed
[ 0.003304] ACPI: Core revision 20120711
[ 0.008731] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.018955] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
[ 0.222422] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.222970] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.223192] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.223415] ... version: 3
[ 0.223635] ... bit width: 48
[ 0.223853] ... generic registers: 4
[ 0.224071] ... value mask: 0000ffffffffffff
[ 0.224293] ... max period: 000000007fffffff
[ 0.224514] ... fixed-purpose events: 3
[ 0.224732] ... event mask: 000000070000000f
[ 0.236431] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
[ 0.351917] Brought up 8 CPUs
[ 0.352137] smpboot: Total of 8 processors activated (42666.28 BogoMIPS)
[ 0.357648] devtmpfs: initialized
[ 0.358066] NET: Registered protocol family 16
[ 0.358528] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.358928] ACPI: bus type pci registered
[ 0.359229] dca service started, version 1.12.1
[ 0.359489] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.359893] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.365427] PCI: Using configuration type 1 for base access
[ 0.369519] bio: create slab <bio-0> at 0
[ 0.369855] ACPI: Added _OSI(Module Device)
[ 0.370075] ACPI: Added _OSI(Processor Device)
[ 0.370294] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.370517] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.371912] ACPI: EC: Look up EC in DSDT
[ 0.385056] ACPI: Interpreter enabled
[ 0.385275] ACPI: (supports S0 S5)
[ 0.385571] ACPI: Using IOAPIC for interrupt routing
[ 0.390272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.391001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
[ 0.391727] PCI host bridge to bus 0000:00
[ 0.391950] pci_bus 0000:00: busn_res: [bus 00-3d] is inserted under domain [bus 00-ff]
[ 0.391952] pci_bus 0000:00: root bus resource [bus 00-3d]
[ 0.392175] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.392400] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.392626] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.392852] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff]
[ 0.397380] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff]
[ 0.397607] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.397841] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[ 0.397896] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
[ 0.397952] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.397976] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[ 0.398031] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.398055] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
[ 0.398110] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.398134] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
[ 0.398196] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
[ 0.398253] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[ 0.398316] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[ 0.398378] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[ 0.398438] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
[ 0.398499] pci 0000:00:19.0: [8086:10cc] type 00 class 0x020000
[ 0.398519] pci 0000:00:19.0: reg 10: [mem 0xd3200000-0xd321ffff]
[ 0.398527] pci 0000:00:19.0: reg 14: [mem 0xd3223000-0xd3223fff]
[ 0.398535] pci 0000:00:19.0: reg 18: [io 0x4100-0x411f]
[ 0.398594] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.398614] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.398654] pci 0000:00:1a.0: reg 20: [io 0x40e0-0x40ff]
[ 0.398703] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.398743] pci 0000:00:1a.1: reg 20: [io 0x40c0-0x40df]
[ 0.398793] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.398833] pci 0000:00:1a.2: reg 20: [io 0x40a0-0x40bf]
[ 0.398891] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.398911] pci 0000:00:1a.7: reg 10: [mem 0xd3222000-0xd32223ff]
[ 0.398997] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.399023] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.399037] pci 0000:00:1b.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit]
[ 0.399101] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.399122] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.399188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.399210] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[ 0.399275] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.399300] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.399365] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.399390] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.399430] pci 0000:00:1d.0: reg 20: [io 0x4080-0x409f]
[ 0.399479] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.399521] pci 0000:00:1d.1: reg 20: [io 0x4060-0x407f]
[ 0.399570] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.399610] pci 0000:00:1d.2: reg 20: [io 0x4040-0x405f]
[ 0.399668] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.399688] pci 0000:00:1d.7: reg 10: [mem 0xd3221000-0xd32213ff]
[ 0.399775] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.399796] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.399856] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.399934] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.400335] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
[ 0.400785] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.400803] pci 0000:00:1f.2: reg 10: [io 0x4128-0x412f]
[ 0.400811] pci 0000:00:1f.2: reg 14: [io 0x4134-0x4137]
[ 0.400818] pci 0000:00:1f.2: reg 18: [io 0x4120-0x4127]
[ 0.400826] pci 0000:00:1f.2: reg 1c: [io 0x4130-0x4133]
[ 0.400833] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
[ 0.400841] pci 0000:00:1f.2: reg 24: [mem 0xd3220000-0xd32207ff]
[ 0.400885] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.400902] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.400917] pci 0000:00:1f.3: reg 10: [mem 0xf0004000-0xf00040ff 64bit]
[ 0.400936] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.400993] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3d]
[ 0.400996] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.401254] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3d]
[ 0.401267] pci 0000:02:00.0: [10de:0640] type 00 class 0x030000
[ 0.401277] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.401288] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.401298] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 0.401305] pci 0000:02:00.0: reg 24: [io 0x3000-0x307f]
[ 0.401312] pci 0000:02:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.401358] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.401582] pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
[ 0.401586] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.401591] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.401624] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3d]
[ 0.401626] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.401888] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3d]
[ 0.401891] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.402154] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-3d]
[ 0.402157] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.402420] pci_bus 0000:06: busn_res: [bus 06] is inserted under [bus 00-3d]
[ 0.402441] pci 0000:06:00.0: [11ab:6121] type 00 class 0x01018f
[ 0.402457] pci 0000:06:00.0: reg 10: [io 0x2018-0x201f]
[ 0.402469] pci 0000:06:00.0: reg 14: [io 0x2024-0x2027]
[ 0.402481] pci 0000:06:00.0: reg 18: [io 0x2010-0x2017]
[ 0.402493] pci 0000:06:00.0: reg 1c: [io 0x2020-0x2023]
[ 0.402506] pci 0000:06:00.0: reg 20: [io 0x2000-0x200f]
[ 0.402518] pci 0000:06:00.0: reg 24: [mem 0xd3100000-0xd31003ff]
[ 0.402582] pci 0000:06:00.0: supports D1
[ 0.402584] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.402602] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.402826] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.402830] pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.402854] pci_bus 0000:07: busn_res: [bus 07] is inserted under [bus 00-3d]
[ 0.402868] pci 0000:07:02.0: [1102:0007] type 00 class 0x040100
[ 0.402884] pci 0000:07:02.0: reg 10: [io 0x1000-0x101f]
[ 0.402955] pci 0000:07:02.0: supports D1 D2
[ 0.402971] pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
[ 0.402988] pci 0000:07:03.0: reg 10: [mem 0xd3004000-0xd30047ff]
[ 0.402998] pci 0000:07:03.0: reg 14: [mem 0xd3000000-0xd3003fff]
[ 0.403065] pci 0000:07:03.0: supports D1 D2
[ 0.403067] pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.403108] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.403334] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.403338] pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff]
[ 0.403343] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.403345] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.403347] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.403349] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000cbfff] (subtractive decode)
[ 0.403351] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfedfffff] (subtractive decode)
[ 0.403353] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.403379] pci_bus 0000:00: on NUMA node 0
[ 0.403382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.403828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.403938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 0.403976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 0.404013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
[ 0.404051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.404088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.404129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.404266] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
[ 0.412150] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.413071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.413989] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.414906] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.415823] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.416739] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.417656] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.418572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.419615] SCSI subsystem initialized
[ 0.419835] ACPI: bus type scsi registered
[ 0.420118] libata version 3.00 loaded.
[ 0.420174] ACPI: bus type usb registered
[ 0.420433] usbcore: registered new interface driver usbfs
[ 0.420679] usbcore: registered new interface driver hub
[ 0.420929] usbcore: registered new device driver usb
[ 0.421285] PCI: Using ACPI for IRQ routing
[ 0.422801] PCI: Discovered peer bus 3f
[ 0.423020] PCI: root bus 3f: using default resources
[ 0.423021] PCI: Probing PCI hardware (bus 3f)
[ 0.423056] PCI host bridge to bus 0000:3f
[ 0.423276] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.423503] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.423728] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.424130] pci_bus 0000:3f: busn_res: [bus 3f-ff] is inserted under domain [bus 00-ff]
[ 0.424135] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
[ 0.424154] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
[ 0.424172] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
[ 0.424189] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
[ 0.424207] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
[ 0.424223] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
[ 0.424240] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
[ 0.424257] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
[ 0.424274] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
[ 0.424290] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
[ 0.424306] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
[ 0.424324] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
[ 0.424340] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
[ 0.424356] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
[ 0.424372] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
[ 0.424390] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
[ 0.424406] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
[ 0.424423] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
[ 0.424439] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
[ 0.424465] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.425017] PCI: pci_cache_line_size set to 64 bytes
[ 0.425130] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.425131] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.425133] e820: reserve RAM buffer [mem 0xcf4bd000-0xcfffffff]
[ 0.425135] e820: reserve RAM buffer [mem 0xcf4c4000-0xcfffffff]
[ 0.425137] e820: reserve RAM buffer [mem 0xcf7df000-0xcfffffff]
[ 0.425138] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.425270] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.425501] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.425905] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.435995] Switching to clocksource hpet
[ 0.439310] pnp: PnP ACPI init
[ 0.439534] ACPI: bus type pnp registered
[ 0.440005] pnp 00:00: [bus 00-3d]
[ 0.440007] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.440010] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.440011] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.440013] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.440015] pnp 00:00: [mem 0x000c4000-0x000cbfff window]
[ 0.440017] pnp 00:00: [mem 0xfed40000-0xfedfffff window]
[ 0.440019] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 0.440021] pnp 00:00: [mem 0x00000000 window]
[ 0.440075] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.440184] pnp 00:01: [io 0x0000-0x000f]
[ 0.440186] pnp 00:01: [io 0x0081-0x0083]
[ 0.440189] pnp 00:01: [io 0x0087]
[ 0.440191] pnp 00:01: [io 0x0089-0x008b]
[ 0.440192] pnp 00:01: [io 0x008f]
[ 0.440194] pnp 00:01: [io 0x00c0-0x00df]
[ 0.440196] pnp 00:01: [dma 4]
[ 0.440240] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440248] pnp 00:02: [io 0x0070-0x0071]
[ 0.440250] pnp 00:02: [io 0x0074-0x0077]
[ 0.440256] pnp 00:02: [irq 8]
[ 0.440308] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440320] pnp 00:03: [io 0x00f0]
[ 0.440325] pnp 00:03: [irq 13]
[ 0.440368] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440377] pnp 00:04: [io 0x0061]
[ 0.440419] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.440428] pnp 00:05: [io 0x0500-0x053f]
[ 0.440430] pnp 00:05: [io 0x0400-0x047f]
[ 0.440432] pnp 00:05: [io 0x0092]
[ 0.440434] pnp 00:05: [io 0x0680-0x06ff]
[ 0.440435] pnp 00:05: [io 0x0010-0x001f]
[ 0.440437] pnp 00:05: [io 0x0072-0x0073]
[ 0.440439] pnp 00:05: [io 0x0080]
[ 0.440440] pnp 00:05: [io 0x0084-0x0086]
[ 0.440442] pnp 00:05: [io 0x0088]
[ 0.440444] pnp 00:05: [io 0x008c-0x008e]
[ 0.440445] pnp 00:05: [io 0x0090-0x009f]
[ 0.440518] system 00:05: [io 0x0500-0x053f] has been reserved
[ 0.440742] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.440966] system 00:05: [io 0x0680-0x06ff] has been reserved
[ 0.441189] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441229] pnp 00:06: [io 0x0060]
[ 0.441231] pnp 00:06: [io 0x0064]
[ 0.441303] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441490] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.441492] pnp 00:07: [io 0x03f0]
[ 0.441498] pnp 00:07: [irq 6]
[ 0.441499] pnp 00:07: [dma 2]
[ 0.441563] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.441740] pnp 00:08: [mem 0xfec00000-0xfec000ff]
[ 0.441787] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.441832] pnp 00:09: [mem 0xfed00000-0xfed03fff]
[ 0.441883] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.441888] pnp: PnP ACPI: found 10 devices
[ 0.442107] ACPI: ACPI bus type pnp unregistered
[ 0.442397] pci 0000:02:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.442851] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.443080] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.443309] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 0.443530] pci 0000:00:03.0: bridge window [io 0x3000-0x3fff]
[ 0.443755] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.443981] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.444387] pci 0000:00:07.0: PCI bridge to [bus 03]
[ 0.444615] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.444843] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.445071] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.445296] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.445522] pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.445751] pci 0000:00:1e.0: PCI bridge to [bus 07]
[ 0.445973] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.446198] pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff]
[ 0.446464] pci 0000:00:1e.0: setting latency timer to 64
[ 0.446468] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.446470] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.446472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.446474] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff]
[ 0.446476] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfedfffff]
[ 0.446478] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff]
[ 0.446480] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.446482] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd2ffffff]
[ 0.446484] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.446486] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.446488] pci_bus 0000:06: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.446490] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.446492] pci_bus 0000:07: resource 1 [mem 0xd3000000-0xd30fffff]
[ 0.446494] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.446496] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.446498] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.446499] pci_bus 0000:07: resource 7 [mem 0x000c4000-0x000cbfff]
[ 0.446501] pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfedfffff]
[ 0.446503] pci_bus 0000:07: resource 9 [mem 0xd0000000-0xf7ffffff]
[ 0.446505] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.446507] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.446575] NET: Registered protocol family 2
[ 0.446963] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.447959] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.448359] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.448596] TCP: reno registered
[ 0.448814] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.449059] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.449374] NET: Registered protocol family 1
[ 0.449682] RPC: Registered named UNIX socket transport module.
[ 0.449904] RPC: Registered udp transport module.
[ 0.450123] RPC: Registered tcp transport module.
[ 0.450346] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.450996] pci 0000:02:00.0: Boot video device
[ 0.451027] PCI: CLS 64 bytes, default 64
[ 0.452472] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.452700] software IO TLB [mem 0xcb4bd000-0xcf4bcfff] (64MB) mapped at [ffff8800cb4bd000-ffff8800cf4bcfff]
[ 0.454101] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
[ 0.454336] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
[ 0.454565] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
[ 0.454792] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
[ 0.455020] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
[ 0.455251] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
[ 0.455477] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
[ 0.455703] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
[ 0.455969] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.456551] audit: initializing netlink socket (disabled)
[ 0.456780] type=2000 audit(1359037456.339:1): initialized
[ 0.457474] VFS: Disk quotas dquot_6.5.2
[ 0.457716] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.458206] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.458582] NFS: Registering the id_resolver key type
[ 0.458810] Key type id_resolver registered
[ 0.459028] Key type id_legacy registered
[ 0.459253] NTFS driver 2.1.30 [Flags: R/W].
[ 0.459542] msgmni has been set to 11912
[ 0.459914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.460320] io scheduler noop registered
[ 0.460538] io scheduler deadline registered
[ 0.460780] io scheduler cfq registered (default)
[ 0.461239] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.461346] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.461450] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.461701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.462071] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 0.462833] intel_idle: MWAIT substates: 0x1120
[ 0.462842] intel_idle: v0.4 model 0x1A
[ 0.462844] intel_idle: lapic_timer_reliable_states 0x2
[ 0.462936] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.463344] ACPI: Sleep Button [SLPB]
[ 0.463619] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.464019] ACPI: Power Button [PWRF]
[ 0.464342] ACPI: Requesting acpi_cpufreq
[ 0.465910] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 0.467643] brd: module loaded
[ 0.468629] loop: module loaded
[ 0.468930] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \IGPO 1 (20120711/utaddress-251)
[ 0.469417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.469821] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.470076] Loading iSCSI transport class v2.0-870.
[ 0.470522] SCSI Media Changer driver v0.25
[ 0.470799] ahci 0000:00:1f.2: version 3.0
[ 0.470848] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.470913] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.471321] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 0.471723] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.481992] scsi0 : ahci
[ 0.482323] scsi1 : ahci
[ 0.482618] scsi2 : ahci
[ 0.482914] scsi3 : ahci
[ 0.483211] scsi4 : ahci
[ 0.483512] scsi5 : ahci
[ 0.483796] ata1: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220100 irq 43
[ 0.484196] ata2: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220180 irq 43
[ 0.484600] ata3: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220200 irq 43
[ 0.484999] ata4: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220280 irq 43
[ 0.485402] ata5: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220300 irq 43
[ 0.485801] ata6: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220380 irq 43
[ 0.486225] ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
[ 0.486640] ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 0.486865] ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP
[ 0.487090] ahci 0000:06:00.0: masking port_map 0x7 -> 0x3
[ 0.487323] ahci: SSS flag set, parallel bus scan disabled
[ 0.487577] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[ 0.487978] ahci 0000:06:00.0: flags: 64bit stag led slum part
[ 0.488690] scsi6 : ahci
[ 0.488998] scsi7 : ahci
[ 0.489315] scsi8 : ahci
[ 0.489605] ata7: SATA max UDMA/133 abar m1024@0xd3100000 port 0xd3100100 irq 16
[ 0.490005] ata8: SATA max UDMA/133 abar m1024@0xd3100000 port 0xd3100180 irq 16
[ 0.490409] ata9: DUMMY
[ 0.490818] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 0.491040] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 0.491289] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.491337] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.491767] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 0.683392] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:b1:9a:fd
[ 0.683793] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.684037] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 0.688680] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.688925] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.688928] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.689198] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.693493] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.693718] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.693732] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd3222000
[ 0.699304] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.699547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.699771] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700171] usb usb1: Product: EHCI Host Controller
[ 0.700396] usb usb1: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
[ 0.700619] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.700953] hub 1-0:1.0: USB hub found
[ 0.701173] hub 1-0:1.0: 6 ports detected
[ 0.701450] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.701454] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.701731] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.706036] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.706260] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.706273] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3221000
[ 0.712310] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.712549] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.712774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.713173] usb usb2: Product: EHCI Host Controller
[ 0.713397] usb usb2: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
[ 0.713620] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.713950] hub 2-0:1.0: USB hub found
[ 0.714170] hub 2-0:1.0: 6 ports detected
[ 0.714458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.714711] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.714957] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.714960] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.715233] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.715657] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[ 0.715903] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.716128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716531] usb usb3: Product: UHCI Host Controller
[ 0.716752] usb usb3: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
[ 0.716975] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.717312] hub 3-0:1.0: USB hub found
[ 0.717533] hub 3-0:1.0: 2 ports detected
[ 0.717791] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.717794] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.718063] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.718496] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 0.718741] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.718966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.719369] usb usb4: Product: UHCI Host Controller
[ 0.719590] usb usb4: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
[ 0.719812] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.720140] hub 4-0:1.0: USB hub found
[ 0.720365] hub 4-0:1.0: 2 ports detected
[ 0.720622] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.720626] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.720897] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.721330] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000040a0
[ 0.721574] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.721799] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.722199] usb usb5: Product: UHCI Host Controller
[ 0.722423] usb usb5: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
[ 0.722646] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.722968] hub 5-0:1.0: USB hub found
[ 0.723188] hub 5-0:1.0: 2 ports detected
[ 0.723449] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.723453] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.723724] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.724144] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 0.724392] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.724617] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.725016] usb usb6: Product: UHCI Host Controller
[ 0.725237] usb usb6: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
[ 0.725463] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.725788] hub 6-0:1.0: USB hub found
[ 0.726008] hub 6-0:1.0: 2 ports detected
[ 0.726264] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.726267] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.726544] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.726964] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 0.727209] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.727439] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.727838] usb usb7: Product: UHCI Host Controller
[ 0.728059] usb usb7: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
[ 0.728281] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.728609] hub 7-0:1.0: USB hub found
[ 0.728830] hub 7-0:1.0: 2 ports detected
[ 0.729085] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.729089] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.729368] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.729787] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 0.730032] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.730257] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.730660] usb usb8: Product: UHCI Host Controller
[ 0.730881] usb usb8: Manufacturer: Linux 3.6.11-gentoo uhci_hcd
[ 0.731104] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.731433] hub 8-0:1.0: USB hub found
[ 0.731653] hub 8-0:1.0: 2 ports detected
[ 0.731963] Initializing USB Mass Storage driver...
[ 0.732232] usbcore: registered new interface driver usb-storage
[ 0.732458] USB Mass Storage support registered.
[ 0.732728] usbcore: registered new interface driver libusual
[ 0.733060] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.736364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.736589] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.736940] mousedev: PS/2 mouse device common for all mice
[ 0.737377] rtc_cmos 00:02: RTC can wake from S4
[ 0.737719] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.737964] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.738214] i2c /dev entries driver
[ 0.738485] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 0.738878] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 0.739114] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 0.739450] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 0.739699] iTCO_vendor_support: vendor-support=0
[ 0.739920] md: raid1 personality registered for level 1
[ 0.740253] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[ 0.740658] EDAC MC: Ver: 3.0.0
[ 0.741316] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 0.741781] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 0.742259] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 0.742638] cpuidle: using governor ladder
[ 0.743014] cpuidle: using governor menu
[ 0.743415] usbcore: registered new interface driver usbhid
[ 0.743637] usbhid: USB HID core driver
[ 0.743937] TCP: cubic registered
[ 0.744155] NET: Registered protocol family 17
[ 0.744398] Key type dns_resolver registered
[ 0.746768] registered taskstats version 1
[ 0.747476] rtc_cmos 00:02: setting system clock to 2013-01-24 14:24:17 UTC (1359037457)
[ 0.790400] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.790650] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.790890] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.791129] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.791476] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.791865] ata3.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 0.792099] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.792449] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.793021] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 0.793258] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.793587] ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 0.794154] ata3.00: configured for UDMA/133
[ 0.794393] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 0.794625] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.795441] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.795839] ata2.00: configured for UDMA/100
[ 0.796211] ata5.00: configured for UDMA/133
[ 0.796455] ata1.00: configured for UDMA/133
[ 0.796999] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 0.798372] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.798811] sd 0:0:0:0: [sda] Write Protect is off
[ 0.799034] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.799047] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.800242] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 0.803080] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.803575] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.804223] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.804774] scsi 2:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 0.805928] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.806205] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 0.806603] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.806708] sd 4:0:0:0: [sdc] Write Protect is off
[ 0.806710] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 0.806764] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.812209] sd 2:0:0:0: [sdb] Write Protect is off
[ 0.812464] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.812478] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.815241] sda: sda1 sda2 sda3
[ 0.816354] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.849001] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 0.849378] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
[ 0.851252] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 0.852161] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.111453] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.115037] Freeing unused kernel memory: 3932k freed
[ 1.115742] Write protecting the kernel read-only data: 8192k
[ 1.121384] Freeing unused kernel memory: 1976k freed
[ 1.123502] Freeing unused kernel memory: 532k freed
[ 1.362715] md: md126 stopped.
[ 1.364098] md: bind<sdc3>
[ 1.364573] md: bind<sdb3>
[ 1.365172] bio: create slab <bio-1> at 1
[ 1.365594] md/raid1:md126: active with 2 out of 2 mirrors
[ 1.365837] md126: detected capacity change from 0 to 42960551936
[ 1.382676] md126: unknown partition table
[ 1.392889] kjournald starting. Commit interval 5 seconds
[ 1.392929] EXT3-fs (md126): mounted filesystem with writeback data mode
[ 1.430415] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[ 1.454446] tsc: Refined TSC clocksource calibration: 2666.760 MHz
[ 1.454678] Switching to clocksource tsc
[ 1.594270] usb 7-2: New USB device found, idVendor=047b, idProduct=0011
[ 1.594609] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.594841] usb 7-2: Product: Standard USB Keyboard
[ 1.595062] usb 7-2: Manufacturer: Silitek
[ 1.613824] input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[ 1.614676] hid-generic 0003:047B:0011.0001: input,hidraw0: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.1-2/input0
[ 1.820593] usb 8-2: new low-speed USB device number 2 using uhci_hcd
[ 1.984148] usb 8-2: New USB device found, idVendor=045e, idProduct=0084
[ 1.984387] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.984614] usb 8-2: Product: Basic Optical Mouse
[ 1.984834] usb 8-2: Manufacturer: Microsoft
[ 2.001803] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.003011] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 3.285658] systemd-udevd[1006]: starting version 197
[ 3.736584] Linux agpgart interface v0.103
[ 4.061267] nvidia: module license 'NVIDIA' taints kernel.
[ 4.061271] Disabling lock debugging due to kernel taint
[ 4.068911] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.18 Wed Jan 9 17:02:09 PST 2013
[ 4.487002] md: md5 stopped.
[ 4.487581] md: bind<sdc5>
[ 4.487706] md: bind<sdb5>
[ 4.488584] md/raid1:md5: active with 2 out of 2 mirrors
[ 4.488599] md5: detected capacity change from 0 to 32218319872
[ 4.489159] md5: unknown partition table
[ 4.497333] md: md6 stopped.
[ 4.497898] md: bind<sdc6>
[ 4.498026] md: bind<sdb6>
[ 4.498987] md/raid1:md6: active with 2 out of 2 mirrors
[ 4.499002] md6: detected capacity change from 0 to 335606686720
[ 4.515091] md6: unknown partition table
[ 5.288016] EXT3-fs (md126): warning: maximal mount count reached, running e2fsck is recommended
[ 5.300235] EXT3-fs (md126): using internal journal
[ 5.475283] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 5.483743] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 5.484869] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 5.539238] kjournald starting. Commit interval 5 seconds
[ 5.539306] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 5.556460] EXT3-fs (md6): using internal journal
[ 5.556463] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 7.970140] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 8.070701] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 9.878493] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.878499] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
k2 ~ #



and after starting xdm:


Quote:

k2 ~ # /etc/init.d/xdm start
* Setting up kdm ... [ ok ]
k2 ~ #
<SNIP>
[ 5.556463] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 7.970140] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 8.070701] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 9.878493] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 9.878499] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO



So there is no additional output in dmesg after starting X. xdm is up, graphics are on the screen. Mouse & keyboard don't work.

Again, if there's some question you've asked that I've missed please let me know and I'll get the data.

Thanks!

- Mark
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Thu Jan 24, 2013 2:31 pm    Post subject: Reply with quote

lakeroe wrote:
Hello Mark,

as far as I remember I just added
>=virtual/udev-197 in package.mask
and did an
emerge -vutDN world.
Then I did
revdep-rebuild
rc-update add udev sysinit
rc-update add udev-mount sysinit
rc-update add udev-postmount default
and a reboot.


Thanks. I'll keep this in mind if I don't get udev-197 working today. I appreciate the info.

- Mark
Back to top
View user's profile Send private message
Mark Knecht
n00b
n00b


Joined: 16 Sep 2003
Posts: 63

PostPosted: Thu Jan 24, 2013 4:37 pm    Post subject: Reply with quote

OK - more disappointing info. This machine's software is getting sicker. This morning I sync'ed and did a standard emerge -DuN @world. portage wanted to rebuild gcc-4.6.3 and the build fails. I tried emerging gcc by itself and it fails the same way. Unfortunately the machine has already moved to the 4.6.3 profile so I don't think I can go back, at least not easily.

I dunno what's wrong here but this one machine is certainly unhappy...

:(

- Mark
Back to top
View user's profile Send private message
ssuominen
Developer
Developer


Joined: 30 Sep 2005
Posts: 2000
Location: Finland

PostPosted: Fri Jan 25, 2013 4:57 am    Post subject: Reply with quote

Someone in #gentoo at Freenode had USE="openrc" disabled for sys-fs/udev that prevented the keyboard from working in X

I'm just saying it's worth to check

# emerge -pv udev
# USE="openrc" emerge -pv udev
Back to top
View user's profile Send private message
lakeroe
n00b
n00b


Joined: 14 Oct 2005
Posts: 7

PostPosted: Fri Jan 25, 2013 11:51 am    Post subject: Reply with quote

Okay, I just found the bug:

You just have to manually emerge sys-fs/udev-init-scripts, that's the trick.
This is done automatically if openrc is in the USE flags.

But I have still one more problem:
I don't get a /dev/rtc entry, just /dev/rtc0 so the nvram-wakeup tool is not working.
Any ideas ?

Regards,
lakeroe


Last edited by lakeroe on Fri Jan 25, 2013 11:59 am; edited 1 time in total
Back to top
View user's profile Send private message
ssuominen
Developer
Developer


Joined: 30 Sep 2005
Posts: 2000
Location: Finland

PostPosted: Fri Jan 25, 2013 11:57 am    Post subject: Reply with quote

lakeroe wrote:
Okay, I just found the bug:

You just have to manually emerge sys-fs/udev-init-scripts, that's the trick.
This is done automatically if openrc is in the USE flags.

Regards,
lakeroe


USE="openrc" is enabled by default from the IUSE in the ebuild so user must explicitely pass USE="-openrc" in make.conf or package.use to end up with such broken setup.

It's not a bug that USE="-openrc" leaves OpenRC specific init scripts out. It's to be expected setting USE="-openrc" breaks OpenRC systems ;-)
Back to top
View user's profile Send private message
lakeroe
n00b
n00b


Joined: 14 Oct 2005
Posts: 7

PostPosted: Fri Jan 25, 2013 12:03 pm    Post subject: Reply with quote

Okay, it's not a bug, but it would be good to get a message to manually install the init-scripts.
Do you have any idea to get the /dev/rtc entry ?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum