Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Mensajes (unknown) del ACPI cmd en dmesg...
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Spanish
View previous topic :: View next topic  
Author Message
papu
Guru
Guru


Joined: 25 Jan 2008
Posts: 389
Location: Sota algun pi de l'empordà

PostPosted: Tue Jan 22, 2013 6:49 pm    Post subject: Mensajes (unknown) del ACPI cmd en dmesg... Reply with quote

no creo sean normal estos mensajes pero tampoco ocurre nada por ahora. A ver si alguien tiene alguna idea.

tienen que ver con el ACPI cmd, sale algo asi como ...(unknown) ....

dmesg:

Code:

.
.
.
 0.359503] intel_idle: MWAIT substates: 0x1120
[    0.359504] intel_idle: v0.4 model 0x3A
[    0.359505] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.359630] ahci 0000:00:1f.2: version 3.0
[    0.359662] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    0.370557] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.370604] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    0.370639] ahci 0000:00:1f.2: setting latency timer to 64
[    0.380975] scsi0 : ahci
[    0.381064] scsi1 : ahci
[    0.381143] scsi2 : ahci
[    0.381220] scsi3 : ahci
[    0.381299] scsi4 : ahci
[    0.381377] scsi5 : ahci
[    0.381445] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 41
[    0.381479] ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 41
[    0.381518] ata3: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16200 irq 41
[    0.381552] ata4: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16280 irq 41
[    0.381586] ata5: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16300 irq 41
[    0.381619] ata6: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16380 irq 41
[    0.381711] ahci 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.381744] ahci: SSS flag set, parallel bus scan disabled
[    0.381821] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.381856] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[    0.382110] scsi6 : ahci
[    0.382195] scsi7 : ahci
[    0.382268] ata7: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00100 irq 42
[    0.382303] ata8: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00180 irq 42
[    0.385019] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.387815] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.387845] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.387954] mousedev: PS/2 mouse device common for all mice
[    0.388031] I2O subsystem v1.325
[    0.388061] i2o: max drivers = 8
[    0.388156] rtc_cmos 00:06: RTC can wake from S4
[    0.388290] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.388341] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.388417] cpuidle: using governor ladder
[    0.388485] cpuidle: using governor menu
[    0.388599] usbcore: registered new interface driver usbhid
[    0.388628] usbhid: USB HID core driver
[    0.388723] TCP: cubic registered
[    0.388759] Key type dns_resolver registered
[    0.389208] registered taskstats version 1
[    0.389648] rtc_cmos 00:06: setting system clock to 2013-01-22 19:36:59 UTC (1358883419)
[    0.686373] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.686433] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.686476] ata2: SATA link down (SStatus 0 SControl 300)
[    0.686522] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.687040] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.687045] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.687091] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.687377] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.687422] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.687483] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.687490] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.687521] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.687613] ata1.00: ATA-9: M4-CT128M4SSD2, 040H, max UDMA/100
[    0.687660] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.687756] ata1.00: failed to get Identify Device Data, Emask 0x1
[    0.688323] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.688325] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.688360] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.688970] ata1.00: failed to get Identify Device Data, Emask 0x1
[    0.688976] ata1.00: configured for UDMA/100
[    0.689044] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.689045] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.689076] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.689159] scsi 0:0:0:0: Direct-Access     ATA      M4-CT128M4SSD2   040H PQ: 0 ANSI: 5
[    0.689364] ata7: SATA link down (SStatus 0 SControl 300)
[    0.689685] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.689827] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.689903] sd 0:0:0:0: [sda] Write Protect is off
[    0.689932] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.690009] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.690500]  sda: sda1 sda2
[    0.690642] ata5.00: HPA detected: current 1465147055, native 1465149168
[    0.690676] ata5.00: ATA-8: ST3750330AS, SD15, max UDMA/133
[    0.690710] ata5.00: 1465147055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.690863] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) rejected by device (Stat=0x51 Err=0x04)
[    0.690878] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.690930] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.690959] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.691122] ata5.00: failed to get Identify Device Data, Emask 0x1
[    0.691498] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.691501] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.691550] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.691995] ata3.00: HPA detected: current 145223999, native 145226112
[    0.692035] ata3.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[    0.692073] ata3.00: 145223999 sectors, multi 16: LBA48
[    0.693239] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.693242] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.693289] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.694204] ata6.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    0.695269] ata5.00: failed to get Identify Device Data, Emask 0x1
[    0.695274] ata5.00: configured for UDMA/133
[    0.697597] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) rejected by device (Stat=0x51 Err=0x04)
[    0.697650] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.697679] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.698766] ata3.00: configured for UDMA/133
[    0.698910] scsi 2:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
[    0.699084] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.699086] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.699117] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    0.699223] sd 2:0:0:0: [sdb] 145223999 512-byte logical blocks: (74.3 GB/69.2 GiB)
[    0.699290] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.699359] sd 2:0:0:0: [sdb] Write Protect is off
[    0.699390] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.699427] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.689938] ACPI: Invalid Power Resource to register!
[    0.699454] ACPI: Invalid Power Resource to register!
[    0.701804] ata6.00: configured for UDMA/100
[    0.702921]  sdb: sdb1 sdb2 sdb3
[    0.703503] sd 2:0:0:0: [sdb] Attached SCSI disk
[    0.717463] ata4.00: HPA detected: current 625140335, native 625142448
[    0.717512] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[    0.717540] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.898287] ata4.00: failed to get Identify Device Data, Emask 0x1
[    0.899569] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
[    0.899575] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
[    0.899619] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
[    1.114731] ata4.00: failed to get Identify Device Data, Emask 0x1
[    1.114738] ata4.00: configured for UDMA/133
[    1.114918] scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    1.115528] sd 3:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[    1.115718] sd 3:0:0:0: [sdc] Write Protect is off
[    1.115751] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.115755] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.115796] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.115974] scsi 4:0:0:0: Direct-Access     ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
[    1.115925] ACPI: Invalid Power Resource to register!
[    1.116150] sd 4:0:0:0: [sdd] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
[    1.116202] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.116230] sd 4:0:0:0: [sdd] Write Protect is off
[    1.116231] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.116246] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.119690] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
[    1.128809] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.128864] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.129006] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.129129] sr 5:0:0:0: Attached scsi generic sg4 type 5
[    1.116400] ACPI: Invalid Power Resource to register!
[    1.129328] ACPI: Invalid Power Resource to register!
.
.
.
   


saludos, ad1
_________________
--Intel i5 3570k --Asrock z77 ext. 4 --Skill 32GB dd3 --Radeon r9 270 --S.O Gentoo & Win 64bits
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Spanish All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum