View previous topic :: View next topic |
Author |
Message |
PipesDownUK n00b
Joined: 22 Jun 2004 Posts: 37
|
Posted: Mon Jan 14, 2013 1:12 pm Post subject: Least hassle wireless networking hardware? |
|
|
Hello,
I recently updated my Gentoo box with new motherboard+CPU. Kernel version has gone from 2.6.x to 3.6.x. I have tried re-using the wireless card which used to work with the ACX111 driver, but the source will no longer compile with the new kernel source. I guess new hardware is the easiest way forward.
I'd be interested in suggestions for what to get for maximum Gentoo compatibility and least hassle in getting it working. I have no knowledge of which chipsets are in which products so actual product recommendation would be most helpful with Vendor and Model number, and with availability in the UK. I'd prefer a PCI or PCIe interface (the motherboard was bought specifically with a PCI slot for the old hardware) as I assume there is more hassle with USB. Having previously selected something that is no longer supported I'd prefer something that is very common and well supported. My current wireless router has a top speed of 54M wirelessly (802.11b and 802.11g) but something supporting more modern standards in addition would be welcome.
What are your suggestions? |
|
Back to top |
|
|
_______0 Guru
Joined: 15 Oct 2012 Posts: 521
|
Posted: Mon Jan 14, 2013 1:33 pm Post subject: |
|
|
anything but broadcom. Atheros, zydas, ralink, etc. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54236 Location: 56N 3W
|
Posted: Mon Jan 14, 2013 1:43 pm Post subject: |
|
|
PipesDownUK,
External kernel modules usually end in tears.
Post your lspci or lsusb ... whichever shows the device. There just may be a kernel driver. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
PipesDownUK n00b
Joined: 22 Jun 2004 Posts: 37
|
Posted: Mon Jan 14, 2013 3:33 pm Post subject: Least hassle wireless networking hardware? |
|
|
Thanks to ______0 for the suggestions.
In reply to NeddySeagoon.
I don't have any hardware yet, I'm looking for suggestions as to what to get. I see lots of your replies in this forum. Any idea what wireless hardware you would get that would work most easily with Gentoo? Which vendors actually publish what chipset their hardware contains?
TIA. |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54236 Location: 56N 3W
|
Posted: Mon Jan 14, 2013 4:15 pm Post subject: |
|
|
PipesDownUK,
Intel, Atheros and Ralink hardware is well supported.
Broadcom should be avoided. Its sometimes supported with a binary blob, which may or may not be maintained with kernel revisions.
Vendors do not usually publish the hardware they use on packaging as it often gets changed with no change to the glossy packaging.
You need to use lsusb on it, if its USB or lspci, if its PCI.
Belkin often but not always, use the USB ID of their devices as the part number on the packaging of their USB devices. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Ant P. Watchman
Joined: 18 Apr 2009 Posts: 6920
|
Posted: Tue Jan 15, 2013 4:42 pm Post subject: |
|
|
Broadcom released the brcmsmac open source driver last year.
Avoid new Atheros hardware, as they've been bought out by Qualcomm whose Linux support is about as good as the likes of Matrox (nonexistent). |
|
Back to top |
|
|
Gusar Advocate
Joined: 09 Apr 2005 Posts: 2665 Location: Slovenia
|
Posted: Tue Jan 15, 2013 5:07 pm Post subject: |
|
|
As far as I know, all Atheros wireless chips have drivers in the kernel. There's one ethernet driver not in the kernel yet (alx), but wireless is covered. Even alx is fully open-source and can be compiled from the wireless-compat package. If you know some Atheros chips without a driver, I'd like to see some info about it.
And yeah, Broadcom released brcmsmac, but there's chips out (BCM43227 and BCM43228) not supported by it. There's one particular chip (BCM43142) where the driver - a closed source one, of course - only ships on Dell machines with Ubuntu pre-installed. So I fully agree with the "anything but Broadcom" notion. |
|
Back to top |
|
|
cwr Veteran
Joined: 17 Dec 2005 Posts: 1969
|
Posted: Wed Jan 16, 2013 9:51 am Post subject: |
|
|
I've had good luck with TP-Link wireless cards, using the PCI card as an Access Point
with the ath9k drivers and hostapd.
Will |
|
Back to top |
|
|
FRIGN n00b
Joined: 12 Jan 2013 Posts: 23 Location: Germany
|
Posted: Sat Jan 19, 2013 7:04 pm Post subject: |
|
|
Judging from my experience, Broadcom works great and doesn't require you to use binary-blobs.
It is the case though that there are binary-drivers for ubuntu and slack, but no one stops you from compiling your own module from sources, which is only needed when your hardware is too cutting edge to be already included in the kernel-sources (Which is the case for me with my Mac mini 6,2, which needs tg3 v3.124c).
EDIT: Excuse me please for not thoroughly reading the title. Wireless drivers are a bigger hassle. |
|
Back to top |
|
|
|