View previous topic :: View next topic |
Author |
Message |
wtq4er n00b
Joined: 18 May 2012 Posts: 17
|
Posted: Sat May 19, 2012 4:45 am Post subject: [solved]Error inserting w83627ehf |
|
|
Hi! Any help with this?
Quote: | # modprobe -v w83627ehf
insmod /lib/modules/3.2.12-gentoo/kernel/drivers/hwmon/w83627ehf.ko
FATAL: Error inserting w83627ehf (/lib/modules/3.2.12-gentoo/kernel/drivers/hwmon/w83627ehf.ko): Device or resource busy
# dmesg
[ 919.872668] w83627ehf: Found W83627DHG chip at 0x290
[ 919.872691] ACPI: resource w83627ehf [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x290-0x299]
[ 919.872694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
|
Last edited by wtq4er on Mon May 21, 2012 5:33 am; edited 1 time in total |
|
Back to top |
|
|
wtq4er n00b
Joined: 18 May 2012 Posts: 17
|
|
Back to top |
|
|
mhodak Veteran
Joined: 15 Nov 2003 Posts: 1218
|
Posted: Sat Jan 05, 2013 7:46 am Post subject: |
|
|
Got hit by the same issue and this thread helped me.
sensors-detect detects w83627ehf and enters it into /etc/conf.d/lm_sensors, but this module cannot be loaded due to conflict with ACPI. asus_atk0110 module should be used instead (on asus boards) per link posted here, replacing w83627ehf with asus_atk0110 in /etc/conf.d/lm_sensors fixed the problem. |
|
Back to top |
|
|
hujuice Guru
Joined: 16 Oct 2007 Posts: 336 Location: Rome, Italy
|
Posted: Tue Nov 19, 2013 5:22 pm Post subject: |
|
|
Same problem here.
Thanks wtq4er for the hint
Regards,
HUjuice _________________ Who hasn't a spine, should have a method.
Chi non ha carattere, deve pur avere un metodo. |
|
Back to top |
|
|
patiobarbecue n00b
Joined: 19 Apr 2015 Posts: 2
|
Posted: Sun Apr 19, 2015 2:09 pm Post subject: pwmconfig still found no pwm |
|
|
Hi, I followed and in deed get asus_atk0110 loaded. However, pwmconfig sitll complains no pwm. What did you do to make it work?
home: sensors
radeon-pci-0500
Adapter: PCI adapter
temp1: +64.0°C
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +45.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +39.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +43.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +39.0°C (high = +80.0°C, crit = +100.0°C)
atk0110-acpi-0
Adapter: ACPI interface
3.3V Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
5V Voltage: +5.00 V (min = +4.50 V, max = +5.50 V)
12V Voltage: +12.19 V (min = +10.20 V, max = +13.80 V)
DRAM Bus Voltage: +1.51 V (min = +1.40 V, max = +1.90 V)
CPU Voltage: +0.94 V (min = +0.80 V, max = +1.80 V)
ICH Voltage: +1.11 V (min = +0.90 V, max = +1.35 V)
ICH PCIE Voltage: +1.51 V (min = +1.20 V, max = +1.80 V)
CPU PLL Voltage: +1.81 V (min = +1.50 V, max = +2.00 V)
IOH PCIE Voltage: +1.81 V (min = +1.20 V, max = +1.80 V)
IOH Voltage: +1.15 V (min = +0.90 V, max = +1.35 V)
QPI/DRAM Core Voltage: +1.18 V (min = +0.80 V, max = +1.50 V)
CPU FAN Speed: 1377 RPM (min = 600 RPM, max = 7200 RPM)
CHA_FAN1 FAN Speed: 580 RPM (min = 600 RPM, max = 7200 RPM)
CHA_FAN2 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CHA_FAN3 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
PWR_FAN FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
OPT_FAN1 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
OPT_FAN2 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
OPT_FAN3 FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +45.0°C (high = +60.0°C, crit = +65.0°C)
MB Temperature: +35.0°C (high = +45.0°C, crit = +55.0°C)
SB Temperature: +60.0°C (high = +65.0°C, crit = +65.0°C)
NB Temperature: +60.0°C (high = +80.0°C, crit = +80.0°C)
OPT_TEMP1 Temperature: +0.0°C (high = +45.0°C, crit = +45.0°C)
OPT_TEMP2 Temperature: +0.0°C (high = +45.0°C, crit = +45.0°C)
OPT_TEMP3 Temperature: +0.0°C (high = +45.0°C, crit = +45.0°C) _________________ underground |
|
Back to top |
|
|
patiobarbecue n00b
Joined: 19 Apr 2015 Posts: 2
|
Posted: Sun Apr 19, 2015 4:40 pm Post subject: it appears to be a BIOS problem? |
|
|
just double checked my BIOS setting in Power->Fan Speed and found that the cha_fan1 speed is 0, which is wrong. and Power->Fan Control only shows Ignore or N/A for cha_fan1. Hence it is not a surprise that fan control attemp at OS level is useless. However, according to the manual of this MB, ASUS RAMPAGE III FORMULA should be able to control all chasis fans, power fan, and OPT fans. Anyone has experience with this MB? _________________ underground |
|
Back to top |
|
|
peakeyed n00b
Joined: 18 Nov 2004 Posts: 60
|
Posted: Sat Mar 04, 2017 5:16 am Post subject: |
|
|
+1 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|