Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
intel i915
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64
View previous topic :: View next topic  
Author Message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Tue Jul 05, 2011 7:20 pm    Post subject: intel i915 Reply with quote

Hi all,
I'm having a problem with my xorg. I've comiled the kernel with agpgart module and intel i915 OK.
But when I try to do X -configure, I got the follow error.

Fatal error: No screens found.

My consolekit is installed and started.

Anyone already passed through this ?!

I can put more information here. But I'm new on gentoo and in this forum too. So let me know what do you need more.

Best,
Thank you.
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
avx
Advocate
Advocate


Joined: 21 Jun 2004
Posts: 2111

PostPosted: Tue Jul 05, 2011 7:37 pm    Post subject: Reply with quote

Do you have x11-drivers/xf86-video-intel installed?
_________________
++++++++++[>+++++++>++++++++++>+++>+<<<<-]>++.>+.+++++++..+++.>++.<<+++++++++++++++.>.+++.------.--------.>+.>.
Back to top
View user's profile Send private message
Voltago
Advocate
Advocate


Joined: 02 Sep 2003
Posts: 2550
Location: In the city of dreaming spires

PostPosted: Tue Jul 05, 2011 9:31 pm    Post subject: Reply with quote

Also, is the kernel option CONFIG_DRM_I915_KMS=y for kernel mode setting used? Recent versions of xf86-video-intel need it to function.
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Tue Jul 05, 2011 10:33 pm    Post subject: Reply with quote

avx wrote:
Do you have x11-drivers/xf86-video-intel installed?


Yes, I have.
Thank you.
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Tue Jul 05, 2011 10:34 pm    Post subject: Reply with quote

Voltago wrote:
Also, is the kernel option CONFIG_DRM_I915_KMS=y for kernel mode setting used? Recent versions of xf86-video-intel need it to function.


Yes, I also have this.
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Tue Jul 05, 2011 10:48 pm    Post subject: Reply with quote

Take a look guys:

localhost ~ # dmesg |grep i915
[ 1.175513] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!


Quote:
localhost ~ # grep -i intel /usr/src/linux/.config
CONFIG_HAVE_INTEL_TXT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_X86_MCE_INTEL=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_INTEL_IDLE is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_I2C_INTEL_MID is not set
CONFIG_AGP_INTEL=ylocalhost ~ # grep -i intel /usr/src/linux/.config
CONFIG_HAVE_INTEL_TXT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_X86_MCE_INTEL=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_INTEL_IDLE is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_I2C_INTEL_MID is not set
CONFIG_AGP_INTEL=y
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set


I think my kernel is OK, right ?!
But still, can't open KDE.

Best,
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Wed Jul 06, 2011 12:48 am    Post subject: Reply with quote

Just for you all to know, I can execute the kdm with the vesa driver.
So, the problem is with the intel driver specific, I guess. But I still don't know how to fix it.

Any ideas !?

Best !
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 1678
Location: Berlin, Germany

PostPosted: Wed Jul 06, 2011 11:15 pm    Post subject: Reply with quote

X -configure does not work with KMS.
Give us your unfiltered dmesg and Xorg.0.log
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Thu Jul 07, 2011 2:40 am    Post subject: Reply with quote

chithanh wrote:
X -configure does not work with KMS.
Give us your unfiltered dmesg and Xorg.0.log


as resquested for you:

DMESG:

Quote:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.39-gentoo-r2-upc0d3 (root@localhost) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #4 SMP PREEMPT Thu Jul 7 01:19:49 Local time zone must be set--s
[ 0.000000] Command line: root=/dev/sda2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b3780000 (usable)
[ 0.000000] BIOS-e820: 00000000b3780000 - 00000000b378e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b378e000 - 00000000b37d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b37d0000 - 00000000b37e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000b37ed000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H55M-S, BIOS 080015 07/15/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb3780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3780000
[ 0.000000] 0000000000 - 00b3600000 page 2M
[ 0.000000] 00b3600000 - 00b3780000 page 4k
[ 0.000000] kernel direct mapping tables up to b3780000 @ b377b000-b3780000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ 137ffa000-138000000
[ 0.000000] ACPI: RSDP 00000000000f99f0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000b3780000 00044 (v01 071510 RSDT0920 20100715 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000b3780200 00084 (v01 071510 FACP0920 20100715 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000b3780460 06D2D (v01 A21F1 A21F1P03 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b378e000 00040
[ 0.000000] ACPI: APIC 00000000b3780390 0008C (v01 071510 APIC0920 20100715 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000b3780420 0003C (v01 071510 OEMMCFG 20100715 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000b378e040 00082 (v01 071510 OEMB0920 20100715 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b378a460 00038 (v01 071510 OEMHPET 20100715 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000b378e0d0 02024 (v01 071510 GMCHSCI 20100715 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000b3790100 00170 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000b3791ab0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133a00000-ffff8801371fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b3780
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 964367
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 716728 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b3780000 - 00000000b378e000
[ 0.000000] PM: Registered nosave memory: 00000000b378e000 - 00000000b37d0000
[ 0.000000] PM: Registered nosave memory: 00000000b37d0000 - 00000000b37e0000
[ 0.000000] PM: Registered nosave memory: 00000000b37e0000 - 00000000b37ed000
[ 0.000000] PM: Registered nosave memory: 00000000b37ed000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880137c00000 s75584 r8192 d22720 u262144
[ 0.000000] pcpu-alloc: s75584 r8192 d22720 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946890
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x78/0x88()
[ 0.000000] Hardware name: To Be Filled By O.E.M.
[ 0.000000] Your BIOS is broken; DMAR reported at address fed91000 returns all ones!
[ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 080015 ; Product Version: To Be Filled By O.E.M.
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-gentoo-r2-upc0d3 #4
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81036a44>] warn_slowpath_common+0x80/0x98
[ 0.000000] [<ffffffff81036aad>] warn_slowpath_fmt_taint+0x3a/0x3c
[ 0.000000] [<ffffffff81ab0c88>] ? early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff81aa9d0c>] ? __acpi_map_table+0x17/0x19
[ 0.000000] [<ffffffff8128d2ec>] warn_invalid_dmar+0x78/0x88
[ 0.000000] [<ffffffff81ac639e>] check_zero_address+0xcb/0x10d
[ 0.000000] [<ffffffff812e8f5f>] ? acpi_get_table_with_size+0x55/0xaf
[ 0.000000] [<ffffffff81562a51>] ? bad_to_user+0xdbb/0xdbb
[ 0.000000] [<ffffffff81ac63f7>] detect_intel_iommu+0x17/0x85
[ 0.000000] [<ffffffff81aa5ca7>] pci_iommu_alloc+0x47/0x71
[ 0.000000] [<ffffffff81ab0524>] mem_init+0x19/0xec
[ 0.000000] [<ffffffff81aa09fe>] start_kernel+0x191/0x376
[ 0.000000] [<ffffffff81aa02a8>] x86_64_start_reservations+0xb8/0xbc
[ 0.000000] [<ffffffff81aa0399>] x86_64_start_kernel+0xed/0xf4
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Memory: 3720688k/5111808k available (5514k kernel code, 1254340k absent, 136780k reserved, 5283k data, 632k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3058.487 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6116.97 BogoMIPS (lpj=3058487)
[ 0.000208] pid_max: default: 32768 minimum: 301
[ 0.000322] Security Framework initialized
[ 0.000417] SELinux: Initializing.
[ 0.000515] SELinux: Starting in permissive mode
[ 0.000801] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002173] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002773] Mount-cache hash table entries: 256
[ 0.003008] Initializing cgroup subsys ns
[ 0.003115] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003289] Initializing cgroup subsys freezer
[ 0.003405] CPU: Physical Processor ID: 0
[ 0.003498] CPU: Processor Core ID: 0
[ 0.003596] mce: CPU supports 9 MCE banks
[ 0.003700] CPU0: Thermal monitoring enabled (TM1)
[ 0.003801] using mwait in idle threads.
[ 0.003948] ACPI: Core revision 20110316
[ 0.029443] DMAR: Host address width 36
[ 0.029539] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.029641] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.029812] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.029917] DMAR: parse DMAR table failure.
[ 0.030019] Setting APIC routing to flat
[ 0.030428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040505] CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
[ 0.141738] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.141966] ... version: 3
[ 0.142061] ... bit width: 48
[ 0.142157] ... generic registers: 4
[ 0.142251] ... value mask: 0000ffffffffffff
[ 0.142350] ... max period: 000000007fffffff
[ 0.142448] ... fixed-purpose events: 3
[ 0.142543] ... event mask: 000000070000000f
[ 0.153723] Booting Node 0, Processors #1
[ 0.153772] smpboot cpu 1: start_ip = 9a000
[ 0.248516] #2
[ 0.248543] smpboot cpu 2: start_ip = 9a000
[ 0.343296] #3
[ 0.343321] smpboot cpu 3: start_ip = 9a000
[ 0.434179] Brought up 4 CPUs
[ 0.434274] Total of 4 processors activated (24469.97 BogoMIPS).
[ 0.435808] kworker/u:0 used greatest stack depth: 5784 bytes left
[ 0.435997] PM: Registering ACPI NVS region at b378e000 (270336 bytes)
[ 0.436188] Time: 2:12:07 Date: 07/07/11
[ 0.436315] NET: Registered protocol family 16
[ 0.436703] ACPI: bus type pci registered
[ 0.436870] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.437047] PCI: not using MMCONFIG
[ 0.437144] PCI: Using configuration type 1 for base access
[ 0.442109] bio: create slab <bio-0> at 0
[ 0.443484] ACPI: EC: Look up EC in DSDT
[ 0.445281] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.447611] ACPI: SSDT 00000000b3790270 01340 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.450212] ACPI: Dynamic OEM Table Load:
[ 0.450341] ACPI: SSDT (null) 01340 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.450617] ACPI: SSDT 00000000b37915b0 004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.451127] ACPI: Dynamic OEM Table Load:
[ 0.451257] ACPI: SSDT (null) 004F4 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 0.452178] ACPI: Interpreter enabled
[ 0.452274] ACPI: (supports S0 S3 S4 S5)
[ 0.452452] ACPI: Using IOAPIC for interrupt routing
[ 0.452567] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.454803] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.484985] ACPI: No dock devices found.
[ 0.485084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.485497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.485948] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.486054] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.486157] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.486327] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.486496] pci_root PNP0A08:00: host bridge window [mem 0xb4000000-0xdfffffff]
[ 0.486667] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.486838] pci_root PNP0A08:00: host bridge window [mem 0x400000000-0xfffffffff]
[ 0.487019] pci 0000:00:00.0: [8086:0069] type 0 class 0x000600
[ 0.487053] pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
[ 0.487062] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
[ 0.487068] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.487072] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
[ 0.487117] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.487135] pci 0000:00:1a.0: reg 10: [mem 0xfbefa000-0xfbefa3ff]
[ 0.487197] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.487201] pci 0000:00:1a.0: PME# disabled
[ 0.487220] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.487232] pci 0000:00:1b.0: reg 10: [mem 0xfbef4000-0xfbef7fff 64bit]
[ 0.487277] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.487280] pci 0000:00:1b.0: PME# disabled
[ 0.487293] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.487338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.487341] pci 0000:00:1c.0: PME# disabled
[ 0.487360] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.487405] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.487408] pci 0000:00:1c.4: PME# disabled
[ 0.487430] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.487448] pci 0000:00:1d.0: reg 10: [mem 0xfbef8000-0xfbef83ff]
[ 0.487510] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.487513] pci 0000:00:1d.0: PME# disabled
[ 0.487528] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.487574] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[ 0.487669] pci 0000:00:1f.2: [8086:3b20] type 0 class 0x000101
[ 0.487682] pci 0000:00:1f.2: reg 10: [io 0xd880-0xd887]
[ 0.487688] pci 0000:00:1f.2: reg 14: [io 0xd800-0xd803]
[ 0.487695] pci 0000:00:1f.2: reg 18: [io 0xd480-0xd487]
[ 0.487701] pci 0000:00:1f.2: reg 1c: [io 0xd400-0xd403]
[ 0.487708] pci 0000:00:1f.2: reg 20: [io 0xd080-0xd08f]
[ 0.487714] pci 0000:00:1f.2: reg 24: [io 0xd000-0xd00f]
[ 0.487743] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.487756] pci 0000:00:1f.3: reg 10: [mem 0xfbef3c00-0xfbef3cff 64bit]
[ 0.487773] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.487798] pci 0000:00:1f.5: [8086:3b26] type 0 class 0x000101
[ 0.487811] pci 0000:00:1f.5: reg 10: [io 0xc880-0xc887]
[ 0.487817] pci 0000:00:1f.5: reg 14: [io 0xc800-0xc803]
[ 0.487824] pci 0000:00:1f.5: reg 18: [io 0xc480-0xc487]
[ 0.487830] pci 0000:00:1f.5: reg 1c: [io 0xc400-0xc403]
[ 0.487837] pci 0000:00:1f.5: reg 20: [io 0xc080-0xc08f]
[ 0.487843] pci 0000:00:1f.5: reg 24: [io 0xc000-0xc00f]
[ 0.487877] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.487896] pci 0000:00:1f.6: reg 10: [mem 0xfbef2000-0xfbef2fff 64bit]
[ 0.487985] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.488087] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.488091] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.488096] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.488142] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.488157] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.488182] pci 0000:02:00.0: reg 18: [mem 0xfafff000-0xfaffffff 64bit pref]
[ 0.488198] pci 0000:02:00.0: reg 20: [mem 0xfaff8000-0xfaffbfff 64bit pref]
[ 0.488209] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[ 0.488244] pci 0000:02:00.0: supports D1 D2
[ 0.488245] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.488249] pci 0000:02:00.0: PME# disabled
[ 0.490043] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.490143] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.490146] pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.490151] pci 0000:00:1c.4: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.490201] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.490306] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.490309] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.490314] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.490316] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.490318] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.490320] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.490322] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.490324] pci 0000:00:1e.0: bridge window [mem 0xb4000000-0xdfffffff] (subtractive decode)
[ 0.490326] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.490328] pci 0000:00:1e.0: bridge window [mem 0x400000000-0xfffffffff] (subtractive decode)
[ 0.490341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.490479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[ 0.490524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.490556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[ 0.490672] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.490907] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.496275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.496601] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.496782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 10 11 12 14 15)
[ 0.497111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.497435] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.497861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.498292] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.498614] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.498997] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.499177] vgaarb: loaded
[ 0.499384] SCSI subsystem initialized
[ 0.499552] libata version 3.00 loaded.
[ 0.499629] usbcore: registered new interface driver usbfs
[ 0.499758] usbcore: registered new interface driver hub
[ 0.499889] usbcore: registered new device driver usb
[ 0.500139] PCI: Using ACPI for IRQ routing
[ 0.500234] PCI: pci_cache_line_size set to 64 bytes
[ 0.500274] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.500378] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.500381] reserve RAM buffer: 00000000b3780000 - 00000000b3ffffff
[ 0.500606] cfg80211: Calling CRDA to update world regulatory domain
[ 0.500609] NetLabel: Initializing
[ 0.500611] NetLabel: domain hash size = 128
[ 0.500612] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.500623] NetLabel: unlabeled traffic allowed by default
[ 0.500630] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.500634] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.503658] Switching to clocksource hpet
[ 0.503908] Switched to NOHz mode on CPU #0
[ 0.504001] Switched to NOHz mode on CPU #2
[ 0.504012] Switched to NOHz mode on CPU #3
[ 0.504046] Switched to NOHz mode on CPU #1
[ 0.508994] pnp: PnP ACPI init
[ 0.509094] ACPI: bus type pnp registered
[ 0.509382] pnp 00:00: [bus 00-ff]
[ 0.509384] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.509386] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.509387] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.509389] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.509391] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.509393] pnp 00:00: [mem 0xb4000000-0xdfffffff window]
[ 0.509394] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[ 0.509396] pnp 00:00: [mem 0x400000000-0xfffffffff window]
[ 0.509481] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.509490] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[ 0.509492] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[ 0.509493] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[ 0.509495] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.509549] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.509654] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.509757] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.509869] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.509973] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.510005] pnp 00:02: [dma 4]
[ 0.510007] pnp 00:02: [io 0x0000-0x000f]
[ 0.510009] pnp 00:02: [io 0x0081-0x0083]
[ 0.510010] pnp 00:02: [io 0x0087]
[ 0.510011] pnp 00:02: [io 0x0089-0x008b]
[ 0.510013] pnp 00:02: [io 0x008f]
[ 0.510014] pnp 00:02: [io 0x00c0-0x00df]
[ 0.510057] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.510066] pnp 00:03: [io 0x0070-0x0071]
[ 0.510076] pnp 00:03: [irq 8]
[ 0.510119] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.510167] pnp 00:04: [io 0x0060]
[ 0.510170] pnp 00:04: [io 0x0064]
[ 0.510175] pnp 00:04: [irq 12]
[ 0.510217] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.510226] pnp 00:05: [io 0x0061]
[ 0.510267] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.510275] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.510279] pnp 00:06: [irq 13]
[ 0.510319] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.510751] pnp 00:07: [io 0x02f8-0x02ff]
[ 0.510756] pnp 00:07: [irq 3]
[ 0.510758] pnp 00:07: [dma 0 disabled]
[ 0.510865] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.511645] pnp 00:08: [io 0x0378-0x037f]
[ 0.511651] pnp 00:08: [irq 7]
[ 0.511652] pnp 00:08: [dma 0 disabled]
[ 0.511903] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.511988] pnp 00:09: [io 0x0010-0x001f]
[ 0.511989] pnp 00:09: [io 0x0022-0x003f]
[ 0.511991] pnp 00:09: [io 0x0044-0x005f]
[ 0.511994] pnp 00:09: [io 0x0062-0x0063]
[ 0.511996] pnp 00:09: [io 0x0065-0x006f]
[ 0.511997] pnp 00:09: [io 0x0072-0x007f]
[ 0.511998] pnp 00:09: [io 0x0080]
[ 0.512000] pnp 00:09: [io 0x0084-0x0086]
[ 0.512001] pnp 00:09: [io 0x0088]
[ 0.512002] pnp 00:09: [io 0x008c-0x008e]
[ 0.512004] pnp 00:09: [io 0x0090-0x009f]
[ 0.512005] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.512006] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.512008] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.512009] pnp 00:09: [io 0x0800-0x087f]
[ 0.512011] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.512012] pnp 00:09: [io 0x0500-0x057f]
[ 0.512014] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.512015] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.512017] pnp 00:09: [mem 0xfed40000-0xfed8ffff]
[ 0.512080] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.512182] system 00:09: [io 0x0800-0x087f] has been reserved
[ 0.512283] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.512384] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.512489] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.512590] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.512694] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.512738] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.512793] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.512832] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.512834] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.512879] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.512911] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[ 0.512964] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.513067] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513129] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.513131] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.513184] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.513289] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.513392] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513495] pnp 00:0e: [io 0x0000-0xffffffffffffffff disabled]
[ 0.513496] pnp 00:0e: [io 0x0a10-0x0a1f]
[ 0.513498] pnp 00:0e: [io 0x0a10-0x0a1f]
[ 0.513499] pnp 00:0e: [io 0x0a20-0x0a2f]
[ 0.513500] pnp 00:0e: [io 0x0a30-0x0a3f]
[ 0.513554] system 00:0e: [io 0x0a10-0x0a1f] has been reserved
[ 0.513656] system 00:0e: [io 0x0a10-0x0a1f] has been reserved
[ 0.513757] system 00:0e: [io 0x0a20-0x0a2f] has been reserved
[ 0.513866] system 00:0e: [io 0x0a30-0x0a3f] has been reserved
[ 0.513967] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514393] pnp 00:0f: [io 0x03f8-0x03ff]
[ 0.514398] pnp 00:0f: [irq 4]
[ 0.514399] pnp 00:0f: [dma 0 disabled]
[ 0.514489] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.514526] pnp 00:10: [mem 0xe0000000-0xefffffff]
[ 0.514579] system 00:10: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.514684] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514860] pnp 00:11: [mem 0x00000000-0x0009ffff]
[ 0.514862] pnp 00:11: [mem 0x000c0000-0x000cffff]
[ 0.514863] pnp 00:11: [mem 0x000e0000-0x000fffff]
[ 0.514865] pnp 00:11: [mem 0x00100000-0xb3ffffff]
[ 0.514866] pnp 00:11: [mem 0xfed90000-0xffffffff]
[ 0.514936] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.515041] system 00:11: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.515144] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.515247] system 00:11: [mem 0x00100000-0xb3ffffff] could not be reserved
[ 0.515351] system 00:11: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.515456] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.515555] pnp: PnP ACPI: found 18 devices
[ 0.515652] ACPI: ACPI bus type pnp unregistered
[ 0.520385] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
[ 0.520490] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.520663] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.520772] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.520872] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.520975] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.521080] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.521255] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.521355] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.521458] pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.521561] pci 0000:00:1c.4: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.521736] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.521843] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.521945] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.522046] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.522153] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.522262] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.522367] pci 0000:00:1c.0: setting latency timer to 64
[ 0.522372] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.522476] pci 0000:00:1c.4: setting latency timer to 64
[ 0.522481] pci 0000:00:1e.0: setting latency timer to 64
[ 0.522484] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.522486] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.522487] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.522489] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.522491] pci_bus 0000:00: resource 8 [mem 0xb4000000-0xdfffffff]
[ 0.522493] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.522494] pci_bus 0000:00: resource 10 [mem 0x400000000-0xfffffffff]
[ 0.522496] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.522498] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.522499] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.522501] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.522503] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.522505] pci_bus 0000:02: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.522506] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.522508] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.522510] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.522511] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.522513] pci_bus 0000:03: resource 8 [mem 0xb4000000-0xdfffffff]
[ 0.522515] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.522516] pci_bus 0000:03: resource 10 [mem 0x400000000-0xfffffffff]
[ 0.522547] NET: Registered protocol family 2
[ 0.522755] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.523664] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.525825] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.526179] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.526281] TCP reno registered
[ 0.526383] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.526503] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.526728] NET: Registered protocol family 1
[ 0.526920] RPC: Registered udp transport module.
[ 0.527018] RPC: Registered tcp transport module.
[ 0.527115] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.527227] pci 0000:00:02.0: Boot video device
[ 0.527290] PCI: CLS 32 bytes, default 64
[ 0.527342] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.527444] Placing 64MB software IO TLB between ffff8800af77b000 - ffff8800b377b000
[ 0.527617] software IO TLB at phys 0xaf77b000 - 0xb377b000
[ 0.528930] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2
[ 0.529035] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2
[ 0.529139] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2
[ 0.529244] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2
[ 0.529376] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.529696] audit: initializing netlink socket (disabled)
[ 0.529813] type=2000 audit(1310004726.351:1): initialized
[ 0.554818] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.557823] VFS: Disk quotas dquot_6.5.2
[ 0.557991] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.558669] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.559263] NTFS driver 2.1.30 [Flags: R/O].
[ 0.559502] fuse init (API version 7.16)
[ 0.559798] msgmni has been set to 7266
[ 0.559984] SELinux: Registering netfilter hooks
[ 0.560309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.560481] io scheduler noop registered
[ 0.560576] io scheduler deadline registered
[ 0.560742] io scheduler cfq registered (default)
[ 0.560913] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.560948] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.561047] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.561077] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.561220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.561380] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.825220] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.101598] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.166981] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.200873] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.213542] Non-volatile memory driver v1.3
[ 1.213670] Linux agpgart interface v0.103
[ 1.213954] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.214129] ACPI: Power Button [PWRB]
[ 1.214280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.214452] ACPI: Power Button [PWRF]
[ 1.214614] ACPI: acpi_idle registered with cpuidle
[ 1.214765] Monitor-Mwait will be used to enter C-1 state
[ 1.214784] Monitor-Mwait will be used to enter C-2 state
[ 1.217947] [drm] Initialized drm 1.1.0 20060810
[ 1.218045] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 1.219635] brd: module loaded
[ 1.220402] loop: module loaded
[ 1.220739] ata_piix 0000:00:1f.2: version 2.13
[ 1.220754] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.220860] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.221072] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.221401] scsi0 : ata_piix
[ 1.221587] scsi1 : ata_piix
[ 1.222633] ata1: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd080 irq 19
[ 1.222739] ata2: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xd088 irq 19
[ 1.222856] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.225041] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.225255] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.225498] scsi2 : ata_piix
[ 1.225665] scsi3 : ata_piix
[ 1.226508] ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 19
[ 1.226614] ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 19
[ 1.226835] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.226940] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.227070] PPP generic driver version 2.4.2
[ 1.227300] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.227415] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.227548] r8169 0000:02:00.0: setting latency timer to 64
[ 1.227593] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.227830] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000664000, d0:27:88:4e:d2:e9, XID 081000c0 IRQ 42
[ 1.231270] console [netcon0] enabled
[ 1.231365] netconsole: network logging started
[ 1.231574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.231677] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.231691] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.231802] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.231805] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.231915] drivers/usb/core/inode.c: creating file 'devices'
[ 1.231918] drivers/usb/core/inode.c: creating file '001'
[ 1.231963] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.238173] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 1.238180] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.238199] ehci_hcd 0000:00:1a.0: support lpm
[ 1.238212] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.238320] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.242234] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[ 1.242236] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 1.242247] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbefa000
[ 1.242349] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.246252] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.252139] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.252275] usb usb1: default language 0x0409
[ 1.252280] usb usb1: udev 1, busnum 1, minor = 0
[ 1.252281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.252384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.252555] usb usb1: Product: EHCI Host Controller
[ 1.252653] usb usb1: Manufacturer: Linux 2.6.39-gentoo-r2-upc0d3 ehci_hcd
[ 1.252757] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.252916] usb usb1: usb_probe_device
[ 1.252918] usb usb1: configuration #1 chosen from 1 choice
[ 1.252924] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.252963] hub 1-0:1.0: usb_probe_interface
[ 1.252964] hub 1-0:1.0: usb_probe_interface - got id
[ 1.252966] hub 1-0:1.0: USB hub found
[ 1.253063] hub 1-0:1.0: 2 ports detected
[ 1.253167] hub 1-0:1.0: standalone hub
[ 1.253168] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.253170] hub 1-0:1.0: individual port over-current protection
[ 1.253171] hub 1-0:1.0: power on to power good time: 20ms
[ 1.253175] hub 1-0:1.0: local power source is good
[ 1.253177] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.253190] drivers/usb/core/inode.c: creating file '001'
[ 1.253226] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.253337] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.253340] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.253440] drivers/usb/core/inode.c: creating file '002'
[ 1.253486] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.262117] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 1.262124] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.262141] ehci_hcd 0000:00:1d.0: support lpm
[ 1.262155] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.262261] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.266165] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[ 1.266166] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.266177] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbef8000
[ 1.266280] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.270183] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.276086] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.276210] usb usb2: default language 0x0409
[ 1.276215] usb usb2: udev 1, busnum 2, minor = 128
[ 1.276216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.276319] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.276489] usb usb2: Product: EHCI Host Controller
[ 1.276585] usb usb2: Manufacturer: Linux 2.6.39-gentoo-r2-upc0d3 ehci_hcd
[ 1.276688] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.276842] usb usb2: usb_probe_device
[ 1.276844] usb usb2: configuration #1 chosen from 1 choice
[ 1.276849] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.276885] hub 2-0:1.0: usb_probe_interface
[ 1.276887] hub 2-0:1.0: usb_probe_interface - got id
[ 1.276889] hub 2-0:1.0: USB hub found
[ 1.276985] hub 2-0:1.0: 2 ports detected
[ 1.277086] hub 2-0:1.0: standalone hub
[ 1.277087] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.277089] hub 2-0:1.0: individual port over-current protection
[ 1.277090] hub 2-0:1.0: power on to power good time: 20ms
[ 1.277093] hub 2-0:1.0: local power source is good
[ 1.277095] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.277109] drivers/usb/core/inode.c: creating file '001'
[ 1.277158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.277260] ohci_hcd: block sizes: ed 80 td 96
[ 1.277294] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.277468] usbcore: registered new interface driver usblp
[ 1.277567] Initializing USB Mass Storage driver...
[ 1.277701] usbcore: registered new interface driver usb-storage
[ 1.277802] USB Mass Storage support registered.
[ 1.277933] usbcore: registered new interface driver libusual
[ 1.278122] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 1.278226] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 1.278700] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.278818] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.279009] mousedev: PS/2 mouse device common for all mice
[ 1.279297] rtc_cmos 00:03: RTC can wake from S4
[ 1.288175] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.288298] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.288444] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.288774] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 1.288947] iTCO_wdt: Found a H55 TCO device (Version=2, TCOBASE=0x0860)
[ 1.289109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.289211] iTCO_vendor_support: vendor-support=0
[ 1.289464] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.289995] cpuidle: using governor ladder
[ 1.290704] cpuidle: using governor menu
[ 1.290799] EFI Variables Facility v0.08 2004-May-17
[ 1.291792] usbcore: registered new interface driver usbhid
[ 1.291892] usbhid: USB HID core driver
[ 1.292009] Netfilter messages via NETLINK v0.30.
[ 1.292130] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.292419] ctnetlink v0.93: registering with nfnetlink.
[ 1.292933] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.293068] TCP cubic registered
[ 1.293161] Initializing XFRM netlink socket
[ 1.293461] NET: Registered protocol family 10
[ 1.294302] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.294444] IPv6 over IPv4 tunneling driver
[ 1.295099] NET: Registered protocol family 17
[ 1.295235] Bridge firewalling registered
[ 1.295339] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 1.295441] All bugs added by David S. Miller <davem@redhat.com>
[ 1.295545] Registering the dns_resolver key type
[ 1.297039] PM: Hibernation image not present or could not be loaded.
[ 1.297050] registered taskstats version 1
[ 1.297340] Magic number: 3:906:206
[ 1.297478] acpi device:2e: hash matches
[ 1.352934] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.352943] hub 1-0:1.0: port 1: status 0501 change 0001
[ 1.376876] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.376883] hub 2-0:1.0: port 1: status 0501 change 0001
[ 1.452741] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 1.452755] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.468024] logips2pp: Detected unknown logitech mouse model 34
[ 1.503826] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.503829] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.527558] Refined TSC clocksource calibration: 3058.999 MHz.
[ 1.527672] Switching to clocksource tsc
[ 1.541223] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.552010] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.554461] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.605596] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.605599] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.668395] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 1.668402] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 1.668630] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.668635] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.668741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.668928] usb 1-1: usb_probe_device
[ 1.668931] usb 1-1: configuration #1 chosen from 1 choice
[ 1.668987] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.669035] hub 1-1:1.0: usb_probe_interface
[ 1.669037] hub 1-1:1.0: usb_probe_interface - got id
[ 1.669039] hub 1-1:1.0: USB hub found
[ 1.669234] hub 1-1:1.0: 6 ports detected
[ 1.669332] hub 1-1:1.0: standalone hub
[ 1.669335] hub 1-1:1.0: individual port power switching
[ 1.669339] hub 1-1:1.0: individual port over-current protection
[ 1.669342] hub 1-1:1.0: Single TT
[ 1.669346] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.669350] hub 1-1:1.0: Port indicators are supported
[ 1.669353] hub 1-1:1.0: power on to power good time: 100ms
[ 1.669624] hub 1-1:1.0: local power source is good
[ 1.669629] hub 1-1:1.0: enabling power on all ports
[ 1.670402] drivers/usb/core/inode.c: creating file '002'
[ 1.670442] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 1.670452] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.721337] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 1.721340] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.770514] hub 1-1:1.0: port 4: status 0101 change 0001
[ 1.771971] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.823108] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 1.823111] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.869810] usb 1-1: link qh256-0001/ffff8801329f9500 start 1 [1/0 us]
[ 1.885913] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 1.885919] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 1.886140] usb 2-1: udev 2, busnum 2, minor = 129
[ 1.886145] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.886250] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.886433] usb 2-1: usb_probe_device
[ 1.886435] usb 2-1: configuration #1 chosen from 1 choice
[ 1.886491] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 1.886542] hub 2-1:1.0: usb_probe_interface
[ 1.886544] hub 2-1:1.0: usb_probe_interface - got id
[ 1.886546] hub 2-1:1.0: USB hub found
[ 1.886746] hub 2-1:1.0: 6 ports detected
[ 1.886844] hub 2-1:1.0: standalone hub
[ 1.886847] hub 2-1:1.0: individual port power switching
[ 1.886851] hub 2-1:1.0: individual port over-current protection
[ 1.886854] hub 2-1:1.0: Single TT
[ 1.886858] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.886864] hub 2-1:1.0: Port indicators are supported
[ 1.886866] hub 2-1:1.0: power on to power good time: 100ms
[ 1.887136] hub 2-1:1.0: local power source is good
[ 1.887141] hub 2-1:1.0: enabling power on all ports
[ 1.887908] drivers/usb/core/inode.c: creating file '002'
[ 1.887952] hub 1-1:1.0: state 7 ports 6 chg 0010 evt 0000
[ 1.888206] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
[ 1.898872] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
[ 1.949360] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[ 1.960742] usb 1-1.4: new low speed USB device number 3 using ehci_hcd
[ 1.972700] hub 1-1:1.0: port 4 not reset yet, waiting 10ms
[ 1.981592] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.981710] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.992685] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.992782] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.003656] usb 2-1: link qh256-0001/ffff880131c8a700 start 1 [1/0 us]
[ 2.003731] ata2.01: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100
[ 2.006878] ata1.01: ATA-8: ST31000524AS, JC45, max UDMA/133
[ 2.006979] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.009597] ata2.01: configured for UDMA/100
[ 2.012867] ata1.01: configured for UDMA/133
[ 2.013109] scsi 0:0:1:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
[ 2.013429] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.013502] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 2.013712] sd 0:0:1:0: [sda] Write Protect is off
[ 2.013799] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.013812] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.014871] scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5
[ 2.017388] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.017560] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.017781] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 2.017873] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.041832] sda: sda1 sda2 sda3 sda4
[ 2.042218] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.042319] md: Waiting for all devices to be available before autodetect
[ 2.042413] md: If you don't use raid, use raid=noautodetect
[ 2.042660] md: Autodetecting RAID arrays.
[ 2.042745] md: Scanned 0 and added 0 devices.
[ 2.042829] md: autorun ...
[ 2.042910] md: ... autorun DONE.
[ 2.059252] usb 1-1.4: skipped 1 descriptor after interface
[ 2.059258] usb 1-1.4: skipped 1 descriptor after interface
[ 2.059869] usb 1-1.4: default language 0x0409
[ 2.063733] usb 1-1.4: udev 3, busnum 1, minor = 2
[ 2.063738] usb 1-1.4: New USB device found, idVendor=0518, idProduct=0001
[ 2.063840] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.063989] usb 1-1.4: Product: USB-compliant keyboard
[ 2.064075] usb 1-1.4: Manufacturer: Plus More Enterprise LTD.
[ 2.064246] usb 1-1.4: usb_probe_device
[ 2.064248] usb 1-1.4: configuration #1 chosen from 1 choice
[ 2.064757] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
[ 2.064846] usbhid 1-1.4:1.0: usb_probe_interface
[ 2.064848] usbhid 1-1.4:1.0: usb_probe_interface - got id
[ 2.067461] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 2.073596] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
[ 2.073770] usb 1-1.4: link qh8-0601/ffff880131caee00 start 2 [1/2 us]
[ 2.073847] generic-usb 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1a.0-1.4/input0
[ 2.074082] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
[ 2.074130] usbhid 1-1.4:1.1: usb_probe_interface
[ 2.074132] usbhid 1-1.4:1.1: usb_probe_interface - got id
[ 2.077302] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input4
[ 2.077473] usb 1-1.4: link qh8-0601/ffff880131c8ab00 start 3 [1/2 us]
[ 2.077607] generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1a.0-1.4/input1
[ 2.077842] drivers/usb/core/inode.c: creating file '003'
[ 2.077854] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0000
[ 2.077856] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010
[ 2.096619] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.096777] VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
[ 2.098100] Freeing unused kernel memory: 632k freed
[ 2.098282] Write protecting the kernel read-only data: 10240k
[ 2.100209] Freeing unused kernel memory: 608k freed
[ 2.104780] Freeing unused kernel memory: 1564k freed
[ 2.478635] kbd_mode used greatest stack depth: 5384 bytes left
[ 2.517227] loadkeys used greatest stack depth: 5008 bytes left
[ 2.517439] init-early.sh used greatest stack depth: 4720 bytes left
[ 3.350144] udev[1106]: starting version 164
[ 3.457678] blkid used greatest stack depth: 4248 bytes left
[ 3.605675] parport_pc 00:08: reported by Plug and Play ACPI
[ 3.605720] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.607595] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.607647] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.607666] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.735527] hda_codec: ALC1200: BIOS auto-probing.
[ 5.356997] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.443517] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.479758] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 5.527584] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.281023] Adding 19535036k swap on /dev/sda4. Priority:-1 extents:1 across:19535036k
[ 18.663532] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[ 18.671520] r8169 0000:02:00.0: eth0: link down
[ 18.671526] r8169 0000:02:00.0: eth0: link down
[ 18.671798] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.396953] r8169 0000:02:00.0: eth0: link up
[ 20.397305] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.895606] eth0: no IPv6 routers present
[ 43.946779] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 44.415158] EXT4-fs (sda3): re-mounted. Opts: commit=0



Xorg.0.log:

Quote:
[ 33.820]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 33.838] X Protocol Version 11, Revision 0
[ 33.838] Build Operating System: Linux 2.6.38-gentoo-r6 x86_64 Gentoo
[ 33.838] Current Operating System: Linux localhost 2.6.39-gentoo-r2-upc0d3 #4 SMP PREEMPT Thu Jul 7 01:19:49 Local time zone must be set--s x86_64
[ 33.838] Kernel command line: root=/dev/sda2
[ 33.838] Build Date: 05 July 2011 02:44:09AM
[ 33.838]
[ 33.838] Current version of pixman: 0.22.0
[ 33.838] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.838] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.838] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 7 02:12:40 2011
[ 33.894] (==) Using config file: "/etc/X11/xorg.conf"
[ 33.894] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 33.913] (==) ServerLayout "X.org Configured"
[ 33.913] (**) |-->Screen "Screen0" (0)
[ 33.913] (**) | |-->Monitor "Monitor0"
[ 33.913] (**) | |-->Device "Card0"
[ 33.913] (**) |-->Screen "Screen1" (1)
[ 33.913] (**) | |-->Monitor "Monitor1"
[ 33.913] (==) No device specified for screen "Screen1".
Using the first device section listed.
[ 33.913] (**) | |-->Device "Card0"
[ 33.913] (**) |-->Screen "Screen2" (2)
[ 33.913] (**) | |-->Monitor "Monitor2"
[ 33.913] (**) | |-->Device "Card2"
[ 33.913] (**) |-->Input Device "Mouse0"
[ 33.913] (**) |-->Input Device "Keyboard0"
[ 33.913] (==) Automatically adding devices
[ 33.913] (==) Automatically enabling devices
[ 33.951] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 33.951] (**) ModulePath set to "/usr/lib64/xorg/modules"
[ 33.951] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 33.951] (WW) Disabling Mouse0
[ 33.951] (WW) Disabling Keyboard0
[ 33.951] (II) Loader magic: 0x7cd160
[ 33.951] (II) Module ABI versions:
[ 33.951] X.Org ANSI C Emulation: 0.4
[ 33.951] X.Org Video Driver: 10.0
[ 33.951] X.Org XInput driver : 12.2
[ 33.951] X.Org Server Extension : 5.0
[ 33.952] (--) PCI:*(0:0:2:0) 8086:0042:105b:0dc7 rev 24, Mem @ 0xfb800000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 33.952] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 33.952] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 33.952] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 33.952] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 33.952] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 33.952] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 33.952] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 33.952] (II) LoadModule: "record"
[ 33.964] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 33.970] (II) Module record: vendor="X.Org Foundation"
[ 33.970] compiled for 1.10.2, module version = 1.13.0
[ 33.970] Module class: X.Org Server Extension
[ 33.970] ABI class: X.Org Server Extension, version 5.0
[ 33.970] (II) Loading extension RECORD
[ 33.970] (II) LoadModule: "dri"
[ 33.994] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 34.004] (II) Module dri: vendor="X.Org Foundation"
[ 34.004] compiled for 1.10.2, module version = 1.0.0
[ 34.004] ABI class: X.Org Server Extension, version 5.0
[ 34.004] (II) Loading extension XFree86-DRI
[ 34.004] (II) LoadModule: "glx"
[ 34.011] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 34.022] (II) Module glx: vendor="X.Org Foundation"
[ 34.022] compiled for 1.10.2, module version = 1.0.0
[ 34.022] ABI class: X.Org Server Extension, version 5.0
[ 34.022] (==) AIGLX enabled
[ 34.022] (II) Loading extension GLX
[ 34.022] (II) LoadModule: "extmod"
[ 34.022] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 34.025] (II) Module extmod: vendor="X.Org Foundation"
[ 34.025] compiled for 1.10.2, module version = 1.0.0
[ 34.025] Module class: X.Org Server Extension
[ 34.025] ABI class: X.Org Server Extension, version 5.0
[ 34.025] (II) Loading extension MIT-SCREEN-SAVER
[ 34.025] (II) Loading extension XFree86-VidModeExtension
[ 34.025] (II) Loading extension XFree86-DGA
[ 34.025] (II) Loading extension DPMS
[ 34.025] (II) Loading extension XVideo
[ 34.025] (II) Loading extension XVideo-MotionCompensation
[ 34.025] (II) Loading extension X-Resource
[ 34.025] (II) LoadModule: "dri2"
[ 34.025] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 34.032] (II) Module dri2: vendor="X.Org Foundation"
[ 34.032] compiled for 1.10.2, module version = 1.2.0
[ 34.032] ABI class: X.Org Server Extension, version 5.0
[ 34.032] (II) Loading extension DRI2
[ 34.032] (II) LoadModule: "dbe"
[ 34.032] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 34.035] (II) Module dbe: vendor="X.Org Foundation"
[ 34.035] compiled for 1.10.2, module version = 1.0.0
[ 34.035] Module class: X.Org Server Extension
[ 34.035] ABI class: X.Org Server Extension, version 5.0
[ 34.035] (II) Loading extension DOUBLE-BUFFER
[ 34.035] (II) LoadModule: "intel"
[ 34.035] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 34.057] (II) Module intel: vendor="X.Org Foundation"
[ 34.057] compiled for 1.10.2, module version = 2.14.0
[ 34.057] Module class: X.Org Video Driver
[ 34.057] ABI class: X.Org Video Driver, version 10.0
[ 34.057] (II) LoadModule: "vesa"
[ 34.057] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 34.061] (II) Module vesa: vendor="X.Org Foundation"
[ 34.061] compiled for 1.10.2, module version = 2.3.0
[ 34.061] Module class: X.Org Video Driver
[ 34.061] ABI class: X.Org Video Driver, version 10.0
[ 34.061] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 34.062] (II) VESA: driver for VESA chipsets: vesa
[ 34.062] (++) using VT number 7

[ 34.178] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 34.178] (II) Loading sub module "vbe"
[ 34.178] (II) LoadModule: "vbe"
[ 34.178] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 34.179] (II) Module vbe: vendor="X.Org Foundation"

Mod Eit: fixed layout - tomk
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 1678
Location: Berlin, Germany

PostPosted: Thu Jul 07, 2011 4:22 pm    Post subject: Reply with quote

This doesn't look so good:
Code:
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x78/0x88()
[ 0.000000] Hardware name: To Be Filled By O.E.M.
[ 0.000000] Your BIOS is broken; DMAR reported at address fed91000 returns all ones!
[ 0.000000] BIOS vendor: American Megatrends Inc.; Ver: 080015 ; Product Version: To Be Filled By O.E.M.
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-gentoo-r2-upc0d3 #4
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81036a44>] warn_slowpath_common+0x80/0x98
[ 0.000000] [<ffffffff81036aad>] warn_slowpath_fmt_taint+0x3a/0x3c
[ 0.000000] [<ffffffff81ab0c88>] ? early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff81aa9d0c>] ? __acpi_map_table+0x17/0x19
[ 0.000000] [<ffffffff8128d2ec>] warn_invalid_dmar+0x78/0x88
[ 0.000000] [<ffffffff81ac639e>] check_zero_address+0xcb/0x10d
[ 0.000000] [<ffffffff812e8f5f>] ? acpi_get_table_with_size+0x55/0xaf
[ 0.000000] [<ffffffff81562a51>] ? bad_to_user+0xdbb/0xdbb
[ 0.000000] [<ffffffff81ac63f7>] detect_intel_iommu+0x17/0x85
[ 0.000000] [<ffffffff81aa5ca7>] pci_iommu_alloc+0x47/0x71
[ 0.000000] [<ffffffff81ab0524>] mem_init+0x19/0xec
[ 0.000000] [<ffffffff81aa09fe>] start_kernel+0x191/0x376
[ 0.000000] [<ffffffff81aa02a8>] x86_64_start_reservations+0xb8/0xbc
[ 0.000000] [<ffffffff81aa0399>] x86_64_start_kernel+0xed/0xf4
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---

Maybe a BIOS update can help.

Also it seems that you don't have i915 KMS enabled in kernel menuconfig. The current xf86-video-intel driver works only with KMS. See http://www.gentoo.org/doc/en/xorg-config.xml how to properly configure your kernel.
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Thu Jul 07, 2011 8:15 pm    Post subject: Reply with quote

I've already built-in the KMS in my kernel, but didn't work.
I will try to update the BIOS and put thre result here.
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Fri Jul 08, 2011 12:03 am    Post subject: Reply with quote

Is there anything else that I can try ? Because I've to install the windows in my computer to update the BIOS.
Take a look, here is the link to the BIOS driver:

http://www.foxconnsupport.com/download.aspx?models=en-us0000500&category=C000000001&series=en-us0000013&keywords=&sort=BIOS

Best,
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 1678
Location: Berlin, Germany

PostPosted: Fri Jul 08, 2011 8:41 am    Post subject: Reply with quote

KMS fails how? logs?

Also the BIOS Version A21F1P05 comes in a zip file which contains a DOS executable, so you can create a FreeDOS bootable CD/USB drive/MEMDISK image and flash from there.
Back to top
View user's profile Send private message
gringo
Advocate
Advocate


Joined: 27 Apr 2003
Posts: 3747

PostPosted: Fri Jul 08, 2011 12:52 pm    Post subject: Reply with quote

not sure if this will apply to you, but IIRC my new lappy kept oopsing with a similar panic all the time if i enabled DMAR in the kernel by default ( that would be CONFIG_DMAR_DEFAULT_ON).
So, if the suggested bios upgrade doesnt help ( it didnt for me), just disable it ... in case you have it enabled of course.

cheers
Back to top
View user's profile Send private message
upc0d3
n00b
n00b


Joined: 05 Jul 2011
Posts: 33

PostPosted: Wed Jul 13, 2011 6:36 pm    Post subject: Reply with quote

Hi my fellows,

I really appreciate your help, but I couldn't fix this problem, I guess it's really a kernel issue.
But I've bought I new video card which is a Geforce 9800 GT.

So now I'll have my Gentoo working. =D

So, Thanks for everyone who try to help me and I'm sorry if I've upset some.

Bye!
See you.
_________________
Hack the world. Save the planet.
Back to top
View user's profile Send private message
myG3nt00
n00b
n00b


Joined: 23 Dec 2012
Posts: 1

PostPosted: Sun Dec 23, 2012 4:04 pm    Post subject: Reply with quote

upc0d3 wrote:
Hi my fellows,

I really appreciate your help, but I couldn't fix this problem, I guess it's really a kernel issue.
But I've bought I new video card which is a Geforce 9800 GT.

So now I'll have my Gentoo working. =D

So, Thanks for everyone who try to help me and I'm sorry if I've upset some.

Bye!
See you.


I know it is an old thread but I had recently same problems (from kernel 3.7). The solution was to disable iommu in kernel since dma access on the GPU(i915) had some problems. Hope it helps someone.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on AMD64 All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum