Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Gentoo doesn't detect Synaptics Touchpad, just general mouse
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
nelsonwcf
n00b
n00b


Joined: 31 Oct 2012
Posts: 17

PostPosted: Fri Dec 07, 2012 11:24 pm    Post subject: Gentoo doesn't detect Synaptics Touchpad, just general mouse Reply with quote

Hi Guys,

As you helped me last time, I decided to post here another problem I am having with my gentoo.
I am trying to configure some options for my touchpad in KDE, already emerged synaptiks, synaptics-drivers, compiled all but touchscreen-synaptics synaptics drivers in the kernel but can't manage to make X detect it.
I am going to post my dmesg and X.log.0 here and ask for help or insights in how should I make my touchpad work.
The file is a bit large but as I don't know what is relevant or not, I am going to post everything here.
Thanks in advance.

Nelson

Here is my dmesg:

Code:


[    0.000000] 1148MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x7f493fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7f493fff]
[    0.000000] On node 0 totalpages: 521251
[    0.000000] free_area_init_node: node 0, pgdat c182e000, node_mem_map f680d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2298 pages used for memmap
[    0.000000]   HighMem zone: 291740 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f67cd000 s30144 r0 d23104 u53248
[    0.000000] pcpu-alloc: s30144 r0 d23104 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517177
[    0.000000] Kernel command line: root=/dev/sda3 ro video=uvesafb:mtrr:3,ywrap,800x600-24@60
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.556 MHz processor.
[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.11 BogoMIPS (lpj=1662556)
[    0.001230] pid_max: default: 32768 minimum: 301
[    0.001384] Security Framework initialized
[    0.001495] SELinux:  Initializing.
[    0.001610] SELinux:  Starting in permissive mode
[    0.001640] Mount-cache hash table entries: 512
[    0.002368] Initializing cgroup subsys cpuacct
[    0.002483] Initializing cgroup subsys freezer
[    0.002630] Disabled fast string operations
[    0.002743] CPU: Physical Processor ID: 0
[    0.002849] CPU: Processor Core ID: 0
[    0.003008] mce: CPU supports 5 MCE banks
[    0.003126] CPU0: Thermal monitoring enabled (TM2)
[    0.003238] using mwait in idle threads.
[    0.003435] ACPI: Core revision 20120320
[    0.015085] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.015701] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.025828] CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
[    0.039028] Brought up 2 CPUs
[    0.040003] Total of 2 processors activated (6650.22 BogoMIPS).
[    0.041145] devtmpfs: initialized
[    0.041514] PM: Registering ACPI NVS region [mem 0x7f575000-0x7f5befff] (303104 bytes)
[    0.042107] RTC time: 22:18:04, date: 12/07/12
[    0.042314] NET: Registered protocol family 16
[    0.042623] kworker/u:0 (15) used greatest stack depth: 7400 bytes left
[    0.043132] ACPI: bus type pci registered
[    0.071060] bio: create slab <bio-0> at 0
[    0.071247] ACPI: Added _OSI(Module Device)
[    0.071247] ACPI: Added _OSI(Processor Device)
[    0.071254] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.072015] ACPI: Added _OSI(Processor Aggregator Device)
[    0.081928] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.083130] ACPI: SSDT 7f497810 00789 (v01 POSITI ABACAXIS 00003000 INTL 20051117)
[    0.084566] ACPI: Dynamic OEM Table Load:
[    0.098216] ACPI: Dynamic OEM Table Load:
[    0.098404] ACPI: SSDT   (null) 000C9 (v02 POSITI ABACAXIS 00003000 INTL 20051117)
[    0.103106] ACPI: Interpreter enabled
[    0.103225] ACPI: (supports S0 S3 S4 S5)
[    0.103537] ACPI: Using IOAPIC for interrupt routing
[    0.120348] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.120348] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.121932] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
[    0.122249] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f603ab88), AE_ALREADY_EXISTS (20120320/psparse-536)
[    0.123143] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.123407] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.143427] pci 0000:01:00.0: supports D1 D2
[    0.143433] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145022] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.145142] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.145150] pci 0000:00:1c.0:   bridge window [mem 0x93000000-0x93ffffff]
[    0.145163] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.145259] pci 0000:02:00.0: [10ec:8176] type 00 class 0x028000
[    0.145289] pci 0000:02:00.0: reg 10: [io  0x1000-0x10ff]
[    0.145335] pci 0000:02:00.0: reg 18: [mem 0x92000000-0x92003fff 64bit]
[    0.145434] pci 0000:02:00.0: supports D1 D2
[    0.147430] pci_bus 0000:00: on NUMA node 0
[    0.147440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.147713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.147893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.148029] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.148321] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20120320/dsfield-143)
[    0.148624] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f603ab88), AE_ALREADY_EXISTS (20120320/psparse-536)
[    0.148995]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
[    0.163203] vgaarb: loaded
[    0.164059] SCSI subsystem initialized
[    0.164158] libata version 3.00 loaded.
[    0.165188] usbcore: registered new device driver usb
[    0.166001] Linux video capture interface: v2.00
[    0.166161] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.166161] PCI: Using ACPI for IRQ routing
[    0.175727] PCI: pci_cache_line_size set to 64 bytes
[    0.175834] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.175839] e820: reserve RAM buffer [mem 0x7f494000-0x7fffffff]
[    0.176121] cfg80211: Calling CRDA to update world regulatory domain
[    0.177233] NetLabel: Initializing
[    0.177341] NetLabel:  domain hash size = 128
[    0.177450] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.177585] NetLabel:  unlabeled traffic allowed by default
[    0.177787] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.177987] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.180011] Switching to clocksource hpet
[    0.197153] pnp: PnP ACPI init
[    0.197287] ACPI: bus type pnp registered
[    0.198799] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.201305] pnp 00:02: [io  0x0000-0x001f]
[    0.201311] pnp 00:02: [io  0x0081-0x0091]
[    0.201316] pnp 00:02: [io  0x0093-0x009f]
[    0.201321] pnp 00:02: [io  0x00c0-0x00df]
[    0.201327] pnp 00:02: [dma 4]
[    0.201473] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.201545] pnp 00:03: [io  0x0070-0x0077]
[    0.201685] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.201845] pnp 00:04: [irq 0 disabled]
[    0.201867] pnp 00:04: [irq 8]
[    0.201873] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.202031] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.202065] pnp 00:05: [io  0x00f0]
[    0.202080] pnp 00:05: [irq 13]
[    0.202214] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.202246] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.202382] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.202440] pnp 00:07: [io  0x0060]
[    0.202446] pnp 00:07: [io  0x0064]
[    0.202459] pnp 00:07: [irq 1]
[    0.202598] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.202722] pnp 00:08: [irq 12]
[    0.202871] pnp 00:08: Plug and Play ACPI device, IDs STLc023 PNP0f13 (active)
[    0.203215] pnp: PnP ACPI: found 9 devices
[    0.203330] ACPI: ACPI bus type pnp unregistered
[    0.240123] NET: Registered protocol family 2
[    0.240328] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.240780] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.241920] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.242511] TCP: Hash tables configured (established 131072 bind 65536)
[    0.242636] TCP: reno registered
[    0.242753] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.242885] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.243211] NET: Registered protocol family 1
[    0.243512] RPC: Registered named UNIX socket transport module.
[    0.243631] RPC: Registered udp transport module.
[    0.243741] RPC: Registered tcp transport module.
[    0.243851] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.256072] PCI: CLS 64 bytes, default 64
[    0.256275] Simple Boot Flag at 0x44 set to 0x1
[    0.258057] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[    0.258190] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[    0.258441] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.259398] audit: initializing netlink socket (disabled)
[    0.259536] type=2000 audit(1354918684.258:1): initialized
[    0.260506] highmem bounce pool size: 64 pages
[    0.260629] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.269788] VFS: Disk quotas dquot_6.5.2
[    0.270120] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.271734] NFS: Registering the id_resolver key type
[    0.272572] NTFS driver 2.1.30 [Flags: R/O].
[    0.273426] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.277810] msgmni has been set to 1722
[    0.277956] SELinux:  Registering netfilter hooks
[    0.279292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.279472] io scheduler noop registered
[    0.279578] io scheduler deadline registered
[    0.279698] io scheduler cfq registered (default)
[    0.280656] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.282912] Linux agpgart interface v0.103
[    0.283134] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    0.283345] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.283669] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.284164] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    0.293695] ACPI: AC Adapter [ACAD] (on-line)
[    0.294425] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.294617] ACPI: Power Button [PWRB]
[    0.294932] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.295191] ACPI: Sleep Button [SLPB]
[    0.295482] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.295849] ACPI: Lid Switch [LID0]
[    0.296183] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.296359] ACPI: Power Button [PWRF]
[    0.296830] ACPI: Requesting acpi_cpufreq
[    0.305616] thermal LNXTHERM:00: registered as thermal_zone0
[    0.305739] ACPI: Thermal Zone [TZ01] (51 C)
[    0.306371] [drm] Initialized drm 1.1.0 20060810
[    0.307552] i915 0000:00:02.0: setting latency timer to 64
[    0.308701] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    0.308851] [drm] Driver supports precise vblank timestamp query.
[    0.309144] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.320270] ACPI: Battery Slot [BAT0] (battery present)
[    0.347258] i915: fixme: max PWM is zero
[    0.632405] [drm] initialized overlay support
[    0.651666] fbcon: inteldrmfb (fb0) is primary device
[    1.086194] Console: switching to colour frame buffer device 128x37
[    1.092746] fb0: inteldrmfb frame buffer device
[    1.092836] drm: registered panic notifier
[    1.096740] acpi device:23: registered as cooling_device2
[    1.097116] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    1.097425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.097708] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.103484] brd: module loaded
[    1.109129] loop: module loaded
[    1.112215] ahci 0000:00:1f.2: version 3.0
[    1.112366] ahci: SSS flag set, parallel bus scan disabled
[    1.115044] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    1.117733] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[    1.120399] ahci 0000:00:1f.2: setting latency timer to 64
[    1.143890] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.147105] r8169 0000:01:00.0: eth0: RTL8102e at 0xf84fe000, e8:9a:8f:cc:06:72, XID 04e00000 IRQ 16
[    1.160269] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[    1.163345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.165856] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[    1.165935] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.165943] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.168570] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.171052] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[    1.171061] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    1.171100] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.173568] ehci_hcd 0000:00:1d.7: debug port 1
[    1.175983] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.179863] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.179869] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    1.179888] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400
[    1.182289] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    1.188036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.190464] usb usb1: default language 0x0409
[    1.190479] usb usb1: udev 1, busnum 1, minor = 0
[    1.190486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.192906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.195305] usb usb1: Product: EHCI Host Controller
[    1.202891] hub 1-0:1.0: USB hub found
[    1.205226] hub 1-0:1.0: 8 ports detected
[    1.207711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.209935] ohci_hcd: block sizes: ed 64 td 64
[    1.210093] uhci_hcd: USB Universal Host Controller Interface driver
[    1.221482] usb usb2: default language 0x0409
[    1.221498] usb usb2: udev 1, busnum 2, minor = 128
[    1.221504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.223661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.225881] usb usb2: Product: UHCI Host Controller
[    1.228135] usb usb2: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
[    1.230453] usb usb2: SerialNumber: 0000:00:1d.0
[    1.232960] usb usb2: usb_probe_device
[    1.232969] usb usb2: configuration #1 chosen from 1 choice
[    1.232984] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    1.233143] hub 2-0:1.0: USB hub found
[    1.235364] hub 2-0:1.0: 2 ports detected
[    1.237598] hub 2-0:1.0: standalone hub
[    1.237603] hub 2-0:1.0: no power switching (usb 1.0)
[    1.251624] usb usb3: Product: UHCI Host Controller
[    1.253804] usb usb3: Manufacturer: Linux 3.5.7-gentoo uhci_hcd
[    1.313293] usbcore: registered new interface driver usblp
[    1.315452] Initializing USB Mass Storage driver...
[    1.317783] usbcore: registered new interface driver usb-storage
[    1.319960] USB Mass Storage support registered.
[    1.322298] usbcore: registered new interface driver libusual
[    1.324729] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MAVC] at 0x60,0x64 irq 1,12
[    1.334749] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.337054] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    1.337067] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.339755] mousedev: PS/2 mouse device common for all mice
[    1.343319] usbcore: registered new interface driver synaptics_usb
[    1.345721] rtc_cmos 00:03: RTC can wake from S4
[    1.348353] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.350739] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.353716] lirc_dev: IR Remote Control driver registered, major 250
[    1.356098] IR NEC protocol handler initialized
[    1.358440] IR RC5(x) protocol handler initialized
[    1.360908] IR RC6 protocol handler initialized
[    1.365790] IR JVC protocol handler initialized
[    1.368225] IR Sony protocol handler initialized
[    1.370741] IR RC5 (streamzap) protocol handler initialized
[    1.373201] IR SANYO protocol handler initialized
[    1.375652] IR MCE Keyboard/mouse protocol handler initialized
[    1.379661] IR LIRC bridge handler initialized
[    1.416519] Netfilter messages via NETLINK v0.30.
[    1.419211] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.422462] ctnetlink v0.93: registering with nfnetlink.
[    1.425622] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.428368] TCP: cubic registered
[    1.431071] Initializing XFRM netlink socket
[    1.434466] NET: Registered protocol family 10
[    1.437387] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.440051] sit: IPv6 over IPv4 tunneling driver
[    1.443114] NET: Registered protocol family 17
[    1.445441] lib80211: common routines for IEEE802.11 drivers
[    1.447882] lib80211_crypt: registered algorithm 'NULL'
[    1.447907] Key type dns_resolver registered
[    1.450301] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.450416] Using IPI No-Shortcut mode
[    1.455528] PM: Hibernation image not present or could not be loaded.
[    1.455545] registered taskstats version 1
[    1.456368] ata1.00: unexpected _GTF length (4)
[    1.467815] console [netcon0] enabled
[    1.470189] netconsole: network logging started
[    1.470294] ata1.00: unexpected _GTF length (4)
[    1.476254] ALSA device list:
[    1.478097] ata1.00: configured for UDMA/133
[    1.478390] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-0 01.0 PQ: 0 ANSI: 5
[    1.482968]   #0: HDA Intel at 0x94200000 irq 16
[    1.483815] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.483821] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.484040] sd 0:0:0:0: [sda] Write Protect is off
[    1.484047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.484131] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.511087] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[    1.530275]  sda: sda1 sda2 sda3
[    1.533866] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.565315] ehci_hcd 0000:00:1d.7: port 4 reset complete, port enabled
[    1.565327] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.685956] usb 1-4: Product: USB Webcam
[    1.688570] usb 1-4: Manufacturer: Sonix Technology Co., Ltd.
[    2.146177] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[    2.259497] VFS: Mounted root (jfs filesystem) readonly on device 8:3.
[    2.262166] Freeing unused kernel memory: 432k freed
[    2.265377] Write protecting the kernel text: 6248k
[    2.268083] Write protecting the kernel read-only data: 1768k


MOD EDIT: unclosed bbcode tag broke forum formatting - post was too large, had to remove a ton of text (none of it relevant to this issue, however). Suggest using pastebin, and while we're at it, pastebin /var/log/Xorg.0.log - Otherwise, carry on! --cach0rr0
Back to top
View user's profile Send private message
BillWho
Veteran
Veteran


Joined: 03 Mar 2012
Posts: 1600
Location: US

PostPosted: Fri Dec 07, 2012 11:32 pm    Post subject: Reply with quote

nelsonwcf,

Do you have INPUT_DEVICES="evdev synaptics" in make,conf :?:
_________________
Good luck :wink:

Since installing gentoo, my life has become one long emerge :)
Back to top
View user's profile Send private message
nelsonwcf
n00b
n00b


Joined: 31 Oct 2012
Posts: 17

PostPosted: Sat Dec 08, 2012 1:08 pm    Post subject: Reply with quote

Yes, I do.
Back to top
View user's profile Send private message
gabrielg
Tux's lil' helper
Tux's lil' helper


Joined: 16 Nov 2012
Posts: 87

PostPosted: Sat Dec 08, 2012 2:42 pm    Post subject: Reply with quote

+1 for MOD - can you pastebin your Xorg.0.log?
Back to top
View user's profile Send private message
megaflow
n00b
n00b


Joined: 11 Mar 2005
Posts: 60
Location: Maasmechelen

PostPosted: Sun Dec 09, 2012 9:44 am    Post subject: Reply with quote

I make a config file to get my touchpad working

/etc/X11/xorg.conf.d/10-synaptics.conf

Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection

got the info from https://wiki.archlinux.org/index.php/Synaptics
_________________
----------------------------
Dell System XPS L702X/0XN71K,Intel(R) Core(TM) i7-2720QM
Back to top
View user's profile Send private message
gabrielg
Tux's lil' helper
Tux's lil' helper


Joined: 16 Nov 2012
Posts: 87

PostPosted: Sun Dec 09, 2012 10:22 am    Post subject: Reply with quote

Good sutff! You might want to edit your original subject and add [SOLVED] so that others know how you fixed your problem (and that you fixed it!).
Back to top
View user's profile Send private message
fturco
Apprentice
Apprentice


Joined: 08 Dec 2010
Posts: 285
Location: Italy

PostPosted: Sun Dec 09, 2012 11:41 am    Post subject: Reply with quote

The OP (nelsonwcf) didn't say he fixed the problem.
Back to top
View user's profile Send private message
gabrielg
Tux's lil' helper
Tux's lil' helper


Joined: 16 Nov 2012
Posts: 87

PostPosted: Sun Dec 09, 2012 11:55 am    Post subject: Reply with quote

Apologies - I guess I assumed it since there isn't an Xorg.0.log yet :-)
Back to top
View user's profile Send private message
nelsonwcf
n00b
n00b


Joined: 31 Oct 2012
Posts: 17

PostPosted: Mon Dec 10, 2012 10:48 pm    Post subject: Reply with quote

Sorry guys for not answering earlier. No, it didn't solve the problem either. In fact, nothing changed creating this 10-synaptics.conf. synaptiks (kde) still don't see the touchpad nor does X.
I did post Xorg.0.log previously but I was too long. Here it is again.

Quote:

[ 21.057]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 21.057] X Protocol Version 11, Revision 0
[ 21.057] Build Operating System: Linux 3.5.7-gentoo i686 Gentoo
[ 21.057] Current Operating System: Linux dragon 3.5.7-gentoo #2 SMP Fri Dec 7 20:14:03 BRST 2012 i686
[ 21.057] Kernel command line: root=/dev/sda3 ro video=uvesafb:mtrr:3,ywrap,800x600-24@60
[ 21.057] Build Date: 04 December 2012 12:18:20AM
[ 21.057]
[ 21.057] Current version of pixman: 0.28.0
[ 21.057] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.057] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.058] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 7 20:18:25 2012
[ 21.196] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.196] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 21.250] (==) No Layout section. Using the first Screen section.
[ 21.250] (**) |-->Screen "Default Screen" (0)
[ 21.250] (**) | |-->Monitor "bar"
[ 21.264] (**) | |-->Device "Intel"
[ 21.264] (==) Automatically adding devices
[ 21.264] (==) Automatically enabling devices
[ 21.264] (==) Automatically adding GPU devices
[ 21.335] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 21.335] Entry deleted from font path.
[ 21.335] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 21.335] Entry deleted from font path.
[ 21.335] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 21.335] Entry deleted from font path.
[ 21.335] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 21.335] Entry deleted from font path.
[ 21.335] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 21.335] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 21.335] Entry deleted from font path.
[ 21.335] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 21.335] (==) FontPath set to:
/usr/share/fonts/misc/
[ 21.335] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.335] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 21.348] (II) Loader magic: 0x822a620
[ 21.348] (II) Module ABI versions:
[ 21.348] X.Org ANSI C Emulation: 0.4
[ 21.348] X.Org Video Driver: 13.0
[ 21.348] X.Org XInput driver : 18.0
[ 21.348] X.Org Server Extension : 7.0
[ 21.350] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 21.352] (--) PCI:*(0:0:2:0) 8086:a011:152d:0860 rev 0, Mem @ 0x94180000/524288, 0x80000000/268435456, 0x94000000/1048576, I/O @ 0x000030c0/8
[ 21.352] (--) PCI: (0:0:2:1) 8086:a012:152d:0860 rev 0, Mem @ 0x94100000/524288
[ 21.352] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.370] Initializing built-in extension Generic Event Extension
[ 21.370] Initializing built-in extension SHAPE
[ 21.370] Initializing built-in extension MIT-SHM
[ 21.370] Initializing built-in extension XInputExtension
[ 21.370] Initializing built-in extension XTEST
[ 21.370] Initializing built-in extension BIG-REQUESTS
[ 21.370] Initializing built-in extension SYNC
[ 21.370] Initializing built-in extension XKEYBOARD
[ 21.370] Initializing built-in extension XC-MISC
[ 21.370] Initializing built-in extension XINERAMA
[ 21.370] Initializing built-in extension XFIXES
[ 21.370] Initializing built-in extension RENDER
[ 21.370] Initializing built-in extension RANDR
[ 21.370] Initializing built-in extension COMPOSITE
[ 21.370] Initializing built-in extension DAMAGE
[ 21.370] Initializing built-in extension MIT-SCREEN-SAVER
[ 21.370] Initializing built-in extension DOUBLE-BUFFER
[ 21.370] Initializing built-in extension RECORD
[ 21.370] Initializing built-in extension DPMS
[ 21.370] Initializing built-in extension X-Resource
[ 21.370] Initializing built-in extension XVideo
[ 21.370] Initializing built-in extension XVideo-MotionCompensation
[ 21.370] Initializing built-in extension XFree86-VidModeExtension
[ 21.370] Initializing built-in extension XFree86-DGA
[ 21.370] Initializing built-in extension XFree86-DRI
[ 21.370] Initializing built-in extension DRI2
[ 21.370] (II) LoadModule: "glx"
[ 21.517] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 21.535] (II) Module glx: vendor="X.Org Foundation"
[ 21.535] compiled for 1.13.0, module version = 1.0.0
[ 21.535] ABI class: X.Org Server Extension, version 7.0
[ 21.535] (==) AIGLX enabled
[ 21.553] Loading extension GLX
[ 21.553] (==) Matched intel as autoconfigured driver 0
[ 21.553] (==) Matched intel as autoconfigured driver 1
[ 21.553] (==) Matched vesa as autoconfigured driver 2
[ 21.553] (==) Matched modesetting as autoconfigured driver 3
[ 21.553] (==) Matched fbdev as autoconfigured driver 4
[ 21.553] (==) Assigned the driver to the xf86ConfigLayout
[ 21.553] (II) LoadModule: "intel"
[ 21.553] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 21.574] (II) Module intel: vendor="X.Org Foundation"
[ 21.574] compiled for 1.13.0, module version = 2.20.13
[ 21.574] Module class: X.Org Video Driver
[ 21.574] ABI class: X.Org Video Driver, version 13.0
[ 21.574] (II) LoadModule: "vesa"
[ 21.574] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 21.582] (II) Module vesa: vendor="X.Org Foundation"
[ 21.582] compiled for 1.13.0, module version = 2.3.2
[ 21.582] Module class: X.Org Video Driver
[ 21.582] ABI class: X.Org Video Driver, version 13.0
[ 21.582] (II) LoadModule: "modesetting"
[ 21.721] (WW) Warning, couldn't open module modesetting
[ 21.721] (II) UnloadModule: "modesetting"
[ 21.721] (II) Unloading modesetting
[ 21.721] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 21.721] (II) LoadModule: "fbdev"
[ 21.721] (WW) Warning, couldn't open module fbdev
[ 21.721] (II) UnloadModule: "fbdev"
[ 21.721] (II) Unloading fbdev
[ 21.721] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 21.721] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 21.723] (II) VESA: driver for VESA chipsets: vesa
[ 21.723] (++) using VT number 7

[ 21.730] (II) intel(0): using device path '/dev/dri/card0'
[ 21.731] (WW) Falling back to old probe method for vesa
[ 21.731] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.731] (==) intel(0): RGB weight 888
[ 21.731] (==) intel(0): Default visual is TrueColor
[ 21.731] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[ 21.733] (**) intel(0): Framebuffer tiled
[ 21.733] (**) intel(0): Pixmaps tiled
[ 21.733] (**) intel(0): 3D buffers tiled
[ 21.733] (**) intel(0): Throttling enabled
[ 21.733] (**) intel(0): Delayed flush enabled
[ 21.733] (**) intel(0): "Tear free" disabled
[ 21.733] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 21.733] (II) intel(0): Output LVDS1 using monitor section bar
[ 21.733] (**) intel(0): Option "PreferredMode" "1024x600"
[ 21.734] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 21.762] (II) intel(0): Output VGA1 has no monitor section
[ 21.762] (II) intel(0): EDID for output LVDS1
[ 21.762] (II) intel(0): Manufacturer: IVO Model: 3f4 Serial#: 0
[ 21.762] (II) intel(0): Year: 2010 Week: 10
[ 21.762] (II) intel(0): EDID Version: 1.3
[ 21.762] (II) intel(0): Digital Display Input
[ 21.762] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13
[ 21.762] (II) intel(0): Gamma: 2.20
[ 21.762] (II) intel(0): No DPMS capabilities specified
[ 21.762] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 21.762] (II) intel(0): First detailed timing is preferred mode
[ 21.762] (II) intel(0): redX: 0.578 redY: 0.346 greenX: 0.336 greenY: 0.560
[ 21.762] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.312 whiteY: 0.328
[ 21.762] (II) intel(0): Manufacturer's mask: 0
[ 21.762] (II) intel(0): Supported detailed timing:
[ 21.762] (II) intel(0): clock: 50.4 MHz Image Size: 223 x 125 mm
[ 21.762] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1104 h_blank_end 1344 h_border: 0
[ 21.762] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 613 v_blanking: 625 v_border: 0
[ 21.762] (II) intel(0): Unknown vendor-specific block f
[ 21.762] (II) intel(0): InfoVision
[ 21.762] (II) intel(0): M101NWT2 R1
[ 21.762] (II) intel(0): EDID (in hex):
[ 21.762] (II) intel(0): 00ffffffffffff0026cff40300000000
[ 21.762] (II) intel(0): 0a14010380160d780a21d09458568f27
[ 21.762] (II) intel(0): 1f505400000001010101010101010101
[ 21.762] (II) intel(0): 010101010101b0130040415819203020
[ 21.762] (II) intel(0): 3a00df7d000000190000000f00000000
[ 21.762] (II) intel(0): 00000000000000000001000000fe0049
[ 21.762] (II) intel(0): 6e666f566973696f6e0a2020000000fe
[ 21.762] (II) intel(0): 004d3130314e575432205231200a0012
[ 21.762] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 21.763] (II) intel(0): Printing DDC gathered Modelines:
[ 21.763] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 21.763] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 21.763] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 21.763] (II) intel(0): Printing probed modes for output LVDS1
[ 21.763] (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz UeP)
[ 21.763] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 21.763] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 21.763] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 21.791] (II) intel(0): EDID for output VGA1
[ 21.791] (II) intel(0): Output LVDS1 connected
[ 21.791] (II) intel(0): Output VGA1 disconnected
[ 21.791] (II) intel(0): Using user preference for initial modes
[ 21.791] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 21.791] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 21.791] (**) intel(0): Display dimensions: (220, 130) mm
[ 21.791] (**) intel(0): DPI set to (118, 117)
[ 21.791] (II) Loading sub module "dri2"
[ 21.791] (II) LoadModule: "dri2"
[ 21.791] (II) Module "dri2" already built-in
[ 21.791] (II) UnloadModule: "vesa"
[ 21.791] (II) Unloading vesa
[ 21.791] (==) Depth 24 pixmap format is 32 bpp
[ 21.794] (II) intel(0): SNA initialized with gen3 backend
[ 21.794] (==) intel(0): Backing store disabled
[ 21.794] (==) intel(0): Silken mouse enabled
[ 21.794] (II) intel(0): HW Cursor enabled
[ 21.794] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.797] (==) intel(0): DPMS enabled
[ 21.799] (II) intel(0): [DRI2] Setup complete
[ 21.799] (II) intel(0): [DRI2] DRI driver: i915
[ 21.799] (II) intel(0): direct rendering: DRI2 Enabled
[ 21.799] (WW) intel(0): Option "monitor-LVDS" is not used
[ 21.799] (WW) intel(0): Option "PreferredMode" is not used
[ 21.799] (==) intel(0): hotplug detection: "enabled"
[ 21.799] (--) RandR disabled
[ 22.277] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 22.277] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 22.277] (II) AIGLX: enabled GLX_ARB_create_context
[ 22.277] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 22.277] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 22.277] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 22.277] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 22.277] (II) AIGLX: Loaded and initialized i915
[ 22.277] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 22.279] (II) intel(0): switch to mode 1024x600 on crtc 4 (pipe 1)
[ 22.304] (II) intel(0): Setting screen physical size to 270 x 158
[ 23.005] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.005] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.005] (**) Power Button: Applying InputClass "keyboard-all"
[ 23.005] (II) LoadModule: "evdev"
[ 23.005] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.075] (II) Module evdev: vendor="X.Org Foundation"
[ 23.075] compiled for 1.13.0, module version = 2.7.3
[ 23.075] Module class: X.Org XInput Driver
[ 23.075] ABI class: X.Org XInput driver, version 18.0
[ 23.075] (II) Using input driver 'evdev' for 'Power Button'
[ 23.075] (**) Power Button: always reports core events
[ 23.075] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 23.075] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.075] (--) evdev: Power Button: Found keys
[ 23.076] (II) evdev: Power Button: Configuring as keyboard
[ 23.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 23.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.076] (**) Option "xkb_rules" "evdev"
[ 23.076] (**) Option "xkb_model" "abnt2"
[ 23.076] (**) Option "xkb_layout" "br"
[ 23.076] (**) Option "xkb_variant" "abnt2"
[ 23.076] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
[ 23.213] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 23.213] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.213] (**) Video Bus: Applying InputClass "keyboard-all"
[ 23.213] (II) Using input driver 'evdev' for 'Video Bus'
[ 23.213] (**) Video Bus: always reports core events
[ 23.213] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 23.213] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 23.213] (--) evdev: Video Bus: Found keys
[ 23.213] (II) evdev: Video Bus: Configuring as keyboard
[ 23.213] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 23.214] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 23.214] (**) Option "xkb_rules" "evdev"
[ 23.214] (**) Option "xkb_model" "abnt2"
[ 23.214] (**) Option "xkb_layout" "br"
[ 23.214] (**) Option "xkb_variant" "abnt2"
[ 23.214] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
[ 23.215] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 23.215] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.215] (**) Power Button: Applying InputClass "keyboard-all"
[ 23.215] (II) Using input driver 'evdev' for 'Power Button'
[ 23.215] (**) Power Button: always reports core events
[ 23.215] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 23.215] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.216] (--) evdev: Power Button: Found keys
[ 23.216] (II) evdev: Power Button: Configuring as keyboard
[ 23.216] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 23.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 23.216] (**) Option "xkb_rules" "evdev"
[ 23.216] (**) Option "xkb_model" "abnt2"
[ 23.216] (**) Option "xkb_layout" "br"
[ 23.216] (**) Option "xkb_variant" "abnt2"
[ 23.216] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
[ 23.217] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 23.217] (II) No input driver specified, ignoring this device.
[ 23.217] (II) This device may have been added with another device file.
[ 23.218] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 23.218] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 23.218] (**) Sleep Button: Applying InputClass "keyboard-all"
[ 23.218] (II) Using input driver 'evdev' for 'Sleep Button'
[ 23.218] (**) Sleep Button: always reports core events
[ 23.218] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 23.218] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 23.218] (--) evdev: Sleep Button: Found keys
[ 23.218] (II) evdev: Sleep Button: Configuring as keyboard
[ 23.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 23.218] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 23.218] (**) Option "xkb_rules" "evdev"
[ 23.218] (**) Option "xkb_model" "abnt2"
[ 23.218] (**) Option "xkb_layout" "br"
[ 23.219] (**) Option "xkb_variant" "abnt2"
[ 23.219] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
[ 23.220] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 23.221] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 23.221] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.221] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 23.221] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 23.221] (**) AT Translated Set 2 keyboard: always reports core events
[ 23.221] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 23.221] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 23.221] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 23.221] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 23.221] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 23.221] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 23.221] (**) Option "xkb_rules" "evdev"
[ 23.221] (**) Option "xkb_model" "abnt2"
[ 23.221] (**) Option "xkb_layout" "br"
[ 23.221] (**) Option "xkb_variant" "abnt2"
[ 23.221] (**) Option "xkb_options" "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
[ 23.223] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6)
[ 23.223] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 23.223] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 23.223] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 23.223] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6"
[ 23.223] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 23.223] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 23.223] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 23.223] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 23.223] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 23.223] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 23.223] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 23.223] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 23.223] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.223] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 23.224] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[ 23.224] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 23.224] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 23.224] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 23.224] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 23.224] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 23.225] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 23.225] (II) No input driver specified, ignoring this device.
[ 23.225] (II) This device may have been added with another device file.
[ 69.620] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 69.620] (II) intel(0): Printing DDC gathered Modelines:
[ 69.620] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 95.557] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 95.557] (II) intel(0): Printing DDC gathered Modelines:
[ 95.557] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 465.828] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3275.481] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3275.481] (II) intel(0): switch to mode 1024x600 on crtc 4 (pipe 1)
[ 3275.495] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 3275.495] (II) intel(0): Printing DDC gathered Modelines:
[ 3275.495] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
[ 3312.398] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3368.754] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3368.754] (II) intel(0): switch to mode 1024x600 on crtc 4 (pipe 1)
[ 3368.761] (II) intel(0): EDID vendor "IVO", prod id 1012
[ 3368.761] (II) intel(0): Printing DDC gathered Modelines:
[ 3368.761] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1072 1104 1344 600 603 613 625 -hsync -vsync (37.5 kHz eP)
Back to top
View user's profile Send private message
cach0rr0
Moderator
Moderator


Joined: 13 Nov 2008
Posts: 4121
Location: Houston, Republic of Texas

PostPosted: Mon Dec 10, 2012 11:15 pm    Post subject: Reply with quote

nelsonwcf

you can dump these logs onto pastebin, and simply share the link with us - makes it a bit easier for things this long

assuming you don't have X, you can simply emerge wgetpaste and then, for example:

Code:

#wgetpaste /var/log/Xorg.0.log
#dmesg | wgetpaste


also, for pasting log files or code snippets, you will have better luck using the code bbtag, instead of quote, since using quote has a nice habit of converting text into smiley faces.
_________________
Lost configuring your system?
dump lspci -n here | see Pappy's guide | Link Stash
Back to top
View user's profile Send private message
nelsonwcf
n00b
n00b


Joined: 31 Oct 2012
Posts: 17

PostPosted: Tue Dec 11, 2012 12:53 am    Post subject: Reply with quote

I do have X. Nice, never used pastebin before. Thanks for the tips. I will do that right now.
Back to top
View user's profile Send private message
nelsonwcf
n00b
n00b


Joined: 31 Oct 2012
Posts: 17

PostPosted: Tue Dec 11, 2012 12:58 am    Post subject: Reply with quote

Here it is, just as you said:

Xorg.0.log:

http://bpaste.net/show/63639/

Full dmesg:

http://bpaste.net/show/63640/

Thanks again guys.
Back to top
View user's profile Send private message
dmpogo
Advocate
Advocate


Joined: 02 Sep 2004
Posts: 2288
Location: Canada

PostPosted: Tue Dec 11, 2012 5:45 am    Post subject: Reply with quote

Do you have any touchpad related settings in the bios ?
Back to top
View user's profile Send private message
dweezil-n0xad
n00b
n00b


Joined: 30 Oct 2006
Posts: 70
Location: Ostend, Belgium

PostPosted: Tue Dec 11, 2012 9:09 am    Post subject: Reply with quote

I had a similar problem with my touchpad not recognized in dmesg.
Here's how i got mine working:

kernel config
Code:
Input device support  --->
      [*]   Mice  --->
         <M>   PS/2 mouse
         [*]     Elantech PS/2 protocol extension


/etc/modprobe.d/touchpad.conf
Code:
options psmouse proto=auto


you can also try other psmouse proto parameters like bare, imps, exps, any
_________________
ASUS N56VV | i7-3630QM @ 2,4GHZ | 12GB DDR3 | NVIDIA GeForce GT 750M
HP HDX 18 | C2Q Q9000 @2GHz | 6GB DDR3 | NVIDIA GeForce 9600M GT
Back to top
View user's profile Send private message
nelsonwcf
n00b
n00b


Joined: 31 Oct 2012
Posts: 17

PostPosted: Wed Dec 12, 2012 9:24 pm    Post subject: Reply with quote

Nice, seems like it solved the problem. I turned on all three extrensions and it detected the Sentelic FingerSensing Pad.
Thanks again, guys!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum