Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[WIFI] Realtek 8192SU
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
floc_12
Apprentice
Apprentice


Joined: 28 Jun 2006
Posts: 190

PostPosted: Sat Nov 17, 2012 11:21 pm    Post subject: [WIFI] Realtek 8192SU Reply with quote

Bonjour,

Je n'arrive pas a faire fonctionner ma clef wifi sur ma gentoo (3.5.7-gentoo) :

Code:
Bus 001 Device 002: ID 07d1:3303 D-Link System DWA-131 802.11n Wireless N Nano Adapter(rev.A1) [Realtek RTL8192SU]



J'ai bien recompilé mon noyau avec l'option et le pilote est bien présent, mais quand je le lance, rien ne se passe, et ma nouvelle interface n'est pas crée :

Au branchement de la clef :
Code:
usb 1-1: new high-speed USB device number 5 using ehci_hcd
usb 1-1: New USB device found, idVendor=07d1, idProduct=3303
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 11n Adapter
usb 1-1: Manufacturer: Manufacturer Realtek
usb 1-1: SerialNumber: 00e04c000001


Au lancement de modprobe r8192u_usb :
Code:
r8192u_usb: module is from the staging directory, the quality is unknown, you have been warned.
------------[ cut here ]------------
WARNING: at fs/proc/generic.c:586 proc_register+0x12e/0x164()
Hardware name: Compaq nx9110 (DU434ET#ABF)   
proc_dir_entry 'net/ieee80211' already registered
Modules linked in: r8192u_usb(C+) ipv6 ecb md4 cifs rtc snd_atiixp snd_atiixp_modem snd_ac97_codec snd_pcm snd_timer 8139too snd ohci_hcd 8139cp ehci_hcd ac97_bus soundcore sg snd_page_alloc [last unloaded: r8192u_usb]
Pid: 1913, comm: modprobe Tainted: G         C   3.5.7-gentoo #10
Call Trace:
 [<c1022113>] ? warn_slowpath_common+0x6a/0x7d
 [<c10bd1c3>] ? proc_register+0x12e/0x164
 [<c102218c>] ? warn_slowpath_fmt+0x28/0x2c
 [<c10bd1c3>] ? proc_register+0x12e/0x164
 [<e87b1000>] ? 0xe87b0fff
 [<c10bd371>] ? proc_mkdir_mode+0x2b/0x3f
 [<e87b119b>] ? ieee80211_debug_init+0x1d/0x8a [r8192u_usb]
 [<e87b1009>] ? rtl8192_usb_module_init+0x9/0x10f [r8192u_usb]
 [<c1001117>] ? do_one_initcall+0x68/0x111
 [<c104f76b>] ? sys_init_module+0x1246/0x1457
 [<c1410d1c>] ? sysenter_do_call+0x12/0x2c
---[ end trace 4e0468813b931fd5 ]---
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'

Linux kernel driver for RTL8192 based WLAN cards
Copyright (c) 2007-2008, Realsil Wlan
------------[ cut here ]------------
WARNING: at fs/proc/generic.c:586 proc_register+0x12e/0x164()
Hardware name: Compaq nx9110 (DU434ET#ABF)   
proc_dir_entry 'net/rtl819xU' already registered
Modules linked in: r8192u_usb(C+) ipv6 ecb md4 cifs rtc snd_atiixp snd_atiixp_modem snd_ac97_codec snd_pcm snd_timer 8139too snd ohci_hcd 8139cp ehci_hcd ac97_bus soundcore sg snd_page_alloc [last unloaded: r8192u_usb]
Pid: 1913, comm: modprobe Tainted: G        WC   3.5.7-gentoo #10
Call Trace:
 [<c1022113>] ? warn_slowpath_common+0x6a/0x7d
 [<c10bd1c3>] ? proc_register+0x12e/0x164
 [<c102218c>] ? warn_slowpath_fmt+0x28/0x2c
 [<c10bd1c3>] ? proc_register+0x12e/0x164
 [<e87b1000>] ? 0xe87b0fff
 [<c10bd371>] ? proc_mkdir_mode+0x2b/0x3f
 [<e8ee53dc>] ? rtl8192_proc_module_init+0x1c/0x40 [r8192u_usb]
 [<e87b10f0>] ? rtl8192_usb_module_init+0xf0/0x10f [r8192u_usb]
 [<c1001117>] ? do_one_initcall+0x68/0x111
 [<c104f76b>] ? sys_init_module+0x1246/0x1457
 [<c1410d1c>] ? sysenter_do_call+0x12/0x2c
---[ end trace 4e0468813b931fd6 ]---
usbcore: registered new interface driver rtl819xU


Code:
Module                  Size  Used by
r8192u_usb            225873  0
ipv6                  177592  8
ecb                     1377  0
md4                     2545  0
cifs                  194064  2
rtc                     4086  0
snd_atiixp              8342  0
snd_atiixp_modem        6055  0
snd_ac97_codec         74341  2 snd_atiixp,snd_atiixp_modem
snd_pcm                43463  3 snd_atiixp,snd_atiixp_modem,snd_ac97_codec
snd_timer              12175  1 snd_pcm
8139too                14920  0
snd                    34213  5 snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm,snd_timer
ohci_hcd               13354  0
8139cp                 12841  0
ehci_hcd               26916  0
ac97_bus                 577  1 snd_ac97_codec
soundcore               3349  1 snd
sg                     19359  0
snd_page_alloc          4685  3 snd_atiixp,snd_atiixp_modem,snd_pcm



J'ai essayé de télécharger le driver linux surle site de Dlink mais je n'arrive pas à le compiler :

Code:
make[1] : on entre dans le répertoire « /usr/src/linux-3.5.7-gentoo »
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8180_93cx6.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_wx.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192S_phy.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192S_rtl6052.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192S_rtl8225.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r819xU_cmdpkt.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_dm.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192SU_HWImg.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192S_firmware.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192S_Efuse.o
  CC [M]  /home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.o
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192SU_MacConfigAfterFwDownload’:
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:7839:24: attention : comparison between ‘rtl819xUsb_loopback_e’ and ‘enum _RTL8192SUSB_LOOPBACK’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:7841:30: attention : comparison between ‘rtl819xUsb_loopback_e’ and ‘enum _RTL8192SUSB_LOOPBACK’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’:
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12317:5: erreur: ‘struct net_device’ has no member named ‘open’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12318:5: erreur: ‘struct net_device’ has no member named ‘stop’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12319:5: erreur: ‘struct net_device’ has no member named ‘tx_timeout’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12320:5: erreur: ‘struct net_device’ has no member named ‘do_ioctl’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12321:5: erreur: ‘struct net_device’ has no member named ‘set_multicast_list’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12322:5: erreur: ‘struct net_device’ has no member named ‘set_mac_address’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12323:5: erreur: ‘struct net_device’ has no member named ‘get_stats’
/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.c:12324:6: erreur: ‘struct net_device’ has no member named ‘hard_start_xmit’
make[2]: *** [/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u/r8192U_core.o] Erreur 1
make[1]: *** [_module_/home/ced/Téléchargements/rtl8192su_linux_2.4_2.6.0003.1019.2009/HAL/rtl8192u] Erreur 2
make[1] : on quitte le répertoire « /usr/src/linux-3.5.7-gentoo »


Quelqu'un a t'il déjà testé cette clef sur gentoo ?

Merci
Back to top
View user's profile Send private message
guilc
Moderator
Moderator


Joined: 15 Nov 2003
Posts: 3322
Location: Paris - France

PostPosted: Sun Nov 18, 2012 8:35 am    Post subject: Reply with quote

Tu as bien installé le paquet rtl8192su-firmware ? Il semble que ce driver nécessite un firmware.
_________________
Merci de respecter les règles du forum.

Mon site perso : https://www.xwing.info
Mon PORTDIR_OVERLAY : https://gentoo.xwing.info ou layman -a xwing
Back to top
View user's profile Send private message
floc_12
Apprentice
Apprentice


Joined: 28 Jun 2006
Posts: 190

PostPosted: Sun Nov 18, 2012 5:52 pm    Post subject: Reply with quote

Salut,

oui, je l'ai même désinstallé et réinstallé, mais rien n'y fait.

Merci
Back to top
View user's profile Send private message
boozo
Advocate
Advocate


Joined: 01 Jul 2004
Posts: 3137

PostPosted: Sun Nov 18, 2012 6:42 pm    Post subject: Reply with quote

Et en essayant juste ceux fournis par sys-kernel/linux-firmware à la place ? (see this post or this other one)
_________________
" Un psychotique, c'est quelqu'un qui croit dur comme fer que 2 et 2 font 5, et qui en est pleinement satisfait.
Un névrosé, c'est quelqu'un qui sait pertinemment que 2 et 2 font 4, et ça le rend malade ! "
Back to top
View user's profile Send private message
floc_12
Apprentice
Apprentice


Joined: 28 Jun 2006
Posts: 190

PostPosted: Tue Nov 20, 2012 6:37 am    Post subject: Reply with quote

Salut,

Rien a faire, c'est toujours pareil, même avec linux firmware seul.

Je n ai pas du le temps d'éplucher tes deux liens que tu m'as mis boozo. J'ai remis a jour mon système hier et ça trainait un peu.

Je regarderais ce soir et recompilerai mon noyau si besoin en ne mettant que le 8192usb.

Merci
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum