View previous topic :: View next topic |
Author |
Message |
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54254 Location: 56N 3W
|
Posted: Wed Apr 18, 2012 9:23 pm Post subject: |
|
|
Jerichoo,
Its fixed for some time. I need to unstick this thread. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Mad Merlin Veteran
Joined: 09 May 2005 Posts: 1155
|
Posted: Wed Oct 03, 2012 12:33 am Post subject: |
|
|
Was the stage3 tarball ever fixed? I ran into the same problem on a new install today. This is the contents of ./dev in stage3-amd64-20120917.tar.bz2:
Code: |
drwxr-xr-x root/root 0 2012-09-16 23:38 ./dev/
-rw-r--r-- root/root 0 2012-09-16 23:08 ./dev/.keep
-rw-r--r-- root/root 0 2012-09-16 23:38 ./dev/null
-rw-r--r-- root/root 0 2012-09-16 22:58 ./dev/.keep_sys-apps_makedev-0
|
The system didn't boot until I stumbled upon another thread that suggested enabling DEVTMPFS, which I did and then the system booted up as expected.
I don't use an initrd/initramfs, so perhaps the problem is just masked when using either of those (as this thread is obviously not very active anymore). _________________ Game! - Where the stick is mightier than the sword! |
|
Back to top |
|
|
jrussia Tux's lil' helper
Joined: 29 Aug 2012 Posts: 89 Location: Chicago
|
|
Back to top |
|
|
John R. Graham Administrator
Joined: 08 Mar 2005 Posts: 10589 Location: Somewhere over Atlanta, Georgia
|
Posted: Wed Oct 03, 2012 8:46 pm Post subject: |
|
|
Mad Merlin wrote: | Was the stage3 tarball ever fixed? I ran into the same problem on a new install today... | Yes, it was fixed. However, the issue seems to have come back. I ran into the same thing yesterday. However, on my system, I already had the DEVTMPFS symbol enabled in my kernel .config. I needed to correct the device nodes per this thread to get it to boot.
- John _________________ I can confirm that I have received between 0 and 499 National Security Letters. |
|
Back to top |
|
|
Tickeldi n00b
Joined: 17 Mar 2009 Posts: 43 Location: Norddeutschland
|
Posted: Thu Oct 04, 2012 12:18 am Post subject: |
|
|
I had the same problem just today, on a fresh x86_64 install.
The symlink to udev was there but I had to do the nodes recreating thingy shown in the first post to make it finally boot.
DEVTMPFS was activated as well but didn't help. _________________ "Linux basiert doch auf DOS oder nicht?" *schüttel* |
|
Back to top |
|
|
needlern n00b
Joined: 12 Aug 2012 Posts: 46 Location: Marietta, Ga
|
Posted: Thu Oct 04, 2012 10:12 pm Post subject: Trying to do a fresh install using a Stage3 disk |
|
|
It's been several years since I've done a completly fresh install. I have a recent (September) stage 3 disk loaded/booted and going nowhere with it!
My problem has been finding out where to store my wireless router's password. Any ideas?
Bill |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Thu Oct 04, 2012 11:09 pm Post subject: |
|
|
the gentoo minimal install cd has not progressed beyond unprotected or wep wireless networking, and those are only sporadically successful. Use system rescue cd instead. Boot to the xfce4 GUI and use the network manager icon in the lower right corner of the desktop. additional benefits include firefox instead of links with copy and paste from the handbook in firefox to the install terminal window. _________________ Defund the FCC. |
|
Back to top |
|
|
needlern n00b
Joined: 12 Aug 2012 Posts: 46 Location: Marietta, Ga
|
Posted: Fri Oct 05, 2012 12:57 pm Post subject: |
|
|
Thanks Donahue. The System Rescue cd is a workable plan, which I will use.
After I get some practice posting I'll return under a similar user name (needlern1) and report back.
Bill |
|
Back to top |
|
|
peschio n00b
Joined: 05 Oct 2012 Posts: 5
|
Posted: Fri Oct 05, 2012 11:47 pm Post subject: |
|
|
Hello! This is my introductory post.
I'm new to Gentoo and I would really like to start playing with it, if I could only manage to boot my kernel.
I've recompiled with many combinations of DEVTMPFS and other options, my /dev was already well populated but it was re-populated just in case, udev node is where it's supposed to be, and more other stuff than I can remember from this and other threads.
I know this thread is an year old, but most places I've googled (and they are a lot) bring me back here, so I'd like to know if someone has come up with a different solution?
Unless I append "rw" to the GRUB line, it will go through the boot process and hang there after a few seconds, in a fashion very much like is described here. Then at the 300th second it will spit a new line: Code: | kworker/u:0 used greatest stack depth: 4072 bytes left | and that's it.
It seems to boot well with the rw flag, but I don't know what are the consequences? I've been making most corrections and re-compiles after rw booting, I only chrooted a couple of times before I figured that out, but nothing else seems to bring me to the login prompt.
The non-rw boot will also skip many lines going through hardware detection before finally hanging, but I can't see any significant errors. Who wants to see my dmesg?
Here, have my fstab because it's shorter: Code: |
# Bello l'esempio, adesso ci provo io:
/dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/sda2 none swap sw 0 0
/dev/sda3 / ext4 noatime 0 1
/dev/sda4 /home ext4 noatime 0 2
/dev/cdrom /mnt/cdrom auto noauto,user 0 0
proc /proc proc defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
# Incrociamo le dita.
|
Also my sysinit: Code: | total 0
lrwxrwxrwx 1 root root 17 Sep 16 20:08 devfs -> /etc/init.d/devfs
lrwxrwxrwx 1 root root 17 Sep 16 20:08 dmesg -> /etc/init.d/dmesg
lrwxrwxrwx 1 root root 16 Sep 16 20:36 udev -> /etc/init.d/udev
|
grub.conf:
Code: |
# This is a sample grub.conf for use with Genkernel, per the Gentoo handbook
# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#doc_chap2
# If you are not using Genkernel and you need help creating this file, you
# should consult the handbook. Alternatively, consult the grub.conf.sample that
# is included with the Grub documentation.
default 0
timeout 5
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Gentoo Linux 3.4.9 T61
root (hd0,0)
kernel /boot/kernel-3.4.9-gentoo-T61 root=/dev/sda3
title Gentoo Linux 3.4.9 T61 (rescue)
kernel /boot/kernel-3.4.9-gentoo-T61 root=/dev/sda3 init=/bin/bb
# Questi due qui sotto c'erano e ce li lascio per ricordo.
#kernel /boot/kernel-genkernel-x86-2.6.24-gentoo-r5 root=/dev/ram0 real_root=/dev/sda3
#initrd /boot/initramfs-genkernel-x86-2.6.24-gentoo-r5
# vim:ft=conf:
|
Thanks! |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Sat Oct 06, 2012 12:40 am Post subject: |
|
|
boot cd, run
recompile kernel with Quote: | < > Second extended fs support
< > Ext3 journalling file system support
<*> The Extended 4 (ext4) filesystem
[*] Use ext4 for ext2/ext3 file systems (NEW)
[*] Ext4 extended attributes (NEW)
[ ] Ext4 POSIX Access Control Lists (NEW)
[ ] Ext4 Security Labels (NEW)
[ ] EXT4 debugging support (NEW) |
modify grub.conf with
Quote: | kernel /boot/kernel-3.4.9-gentoo-T61 rootfstype=ext4 root=/dev/sda3 |
_________________ Defund the FCC. |
|
Back to top |
|
|
peschio n00b
Joined: 05 Oct 2012 Posts: 5
|
Posted: Sat Oct 06, 2012 1:22 am Post subject: |
|
|
Thanks for the reply! But no luck so far.
Code: | Gentoo-2012 ~ # e2fsck /dev/sda3
e2fsck 1.42.1 (17-Feb-2012)
/dev/sda3: clean, 263368/1222992 files, 997514/4882432 blocks |
The kernel was compiled with ext4 only before and it wouldn't boot.
The current make would support all ext FSs, but it's not any better:
Code: | <*> Second extended fs support
│ │ [ ] Ext2 extended attributes
│ │ [ ] Ext2 execute in place support
│ │ <*> Ext3 journalling file system support
│ │ [*] Default to 'data=ordered' in ext3
│ │ [ ] Ext3 extended attributes
│ │ <*> The Extended 4 (ext4) filesystem
│ │ [*] Ext4 extended attributes
│ │ [ ] Ext4 POSIX Access Control Lists
│ │ [ ] Ext4 Security Labels
│ │ [ ] EXT4 debugging support
│ │ [ ] JBD (ext3) debugging support
│ │ [ ] JBD2 (ext4) debugging support |
Also changing grub.conf didn't work it actually seems to hang a bit earlier. |
|
Back to top |
|
|
peschio n00b
Joined: 05 Oct 2012 Posts: 5
|
Posted: Sat Oct 06, 2012 2:09 am Post subject: |
|
|
I'm recompiling yet one more time with ext4 only from chrooted environment, a phenomenon also known as scraping the bottom of the barrel.
I'm wondering if it might be some init script gone wrong, but I don't even know what scripts gentoo uses at boot time? It mentions an initrc in the handbook but I only have the inittab and it looks fairly normal. I'll look into that now, even though, it wouldn't explain why I can boot in rw mode, would it?
Sorry, I'm writing to my self, hoping to stimulate the collective intelligence.
Hugs,
Peschio |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Sat Oct 06, 2012 2:16 am Post subject: |
|
|
the tarball should have provided. you still have Quote: | Symbol: DEVTMPFS [=y]
Type : boolean
Prompt: Maintain a devtmpfs filesystem to mount at /dev
Defined at drivers/base/Kconfig:24
Depends on: HOTPLUG [=y]
Location:
-> Device Drivers
-> Generic Driver Options
Symbol: DEVTMPFS_MOUNT [=y]
Type : boolean
Prompt: Automount devtmpfs at /dev, after the kernel mounted the rootfs
Defined at drivers/base/Kconfig:44
Depends on: DEVTMPFS [=y]
Location:
-> Device Drivers
-> Generic Driver Options
-> Maintain a devtmpfs filesystem to mount at /dev (DEVTMPFS [=y]) |
posting a jpeg of the hang screen might jog a memory _________________ Defund the FCC. |
|
Back to top |
|
|
peschio n00b
Joined: 05 Oct 2012 Posts: 5
|
Posted: Sat Oct 06, 2012 2:48 am Post subject: |
|
|
I can't believe it's booting after two days. And with two penguins, too...
I'm still not sure what made it work, it seems that the only thing I've done different was to recompile from the live disc, and not from the "rw" boot. I thought that the "rw" flag was meant for a "read and write" boot, but then I noticed that my architecture was even missing from its folder, but then I got the wireless going from rw... oh, what the f... one day I'll write the story, but now I'm just so happy it works.
Thanks donahue! I will remember you when I can't install xorg. |
|
Back to top |
|
|
iamben Apprentice
Joined: 10 May 2004 Posts: 275
|
|
Back to top |
|
|
|