Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
X displaying garbage, memory corruption
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
multix
Apprentice
Apprentice


Joined: 28 Nov 2004
Posts: 177
Location: Italy

PostPosted: Mon Oct 01, 2012 7:11 am    Post subject: X displaying garbage, memory corruption Reply with quote

Hi,

after the latest emerge (I ran also revdep-rebuild and etc-update, as usual) X displays garbage. The screen looks "almost" fine but it displays video corruption: either half o f the lower part is full of artefacts, or each menu once open has the lower part black and in any case once one tries to move the mouse or a menu everything becomes unrecognizable.

However what is seen is in correct colors and display, so it is not a resolution or sync problem (well it is the internal laptop LCD anyway)

How can I get it back working? Some module that did not rebuild?

lspci lists my card as:
Quote:
01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05)


xorg log:
Code:

X.Org X Server 1.13.0
Release Date: 2012-09-05
[   168.314] X Protocol Version 11, Revision 0
[   168.314] Build Operating System: Linux 3.4.4-gentoo i686 Gentoo
[   168.315] Current Operating System: Linux think 3.5.4-gentoo #1 Sun Sep 23 23
:22:20 CEST 2012 i686
[   168.315] Kernel command line: root=/dev/sda5 video=vesa vga=791
[   168.315] Build Date: 08 September 2012  03:22:19AM
[   168.315]
[   168.316] Current version of pixman: 0.27.2
[   168.316]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   168.316] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   168.318] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 29 00:02:54 201
2
[   168.394] (==) Using config file: "/etc/X11/xorg.conf"
[   168.395] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   168.440] (==) ServerLayout "X.org Configured"
[   168.440] (**) |-->Screen "Screen0" (0)
[   168.440] (**) |   |-->Monitor "Monitor0"
[   168.460] (**) |   |-->Device "Card0"
[   168.460] (**) |-->Input Device "Mouse0"
[   168.460] (**) |-->Input Device "Keyboard0"
[   168.460] (==) Automatically adding devices
[   168.460] (==) Automatically enabling devices
[   168.460] (==) Automatically adding GPU devices
[   168.508] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   168.508]    Entry deleted from font path.
[   168.508] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   168.508]    Entry deleted from font path.
[   168.508] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   168.508]    Entry deleted from font path.
[   168.521] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100d
pi/".
[   168.521]    Entry deleted from font path.
[   168.521]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   168.529] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   168.529]    Entry deleted from font path.
[   168.529] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   168.529]    Entry deleted from font path.
[   168.529] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   168.529]    Entry deleted from font path.
[   168.529] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100d
pi/".
[   168.529]    Entry deleted from font path.
[   168.529]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   168.529] (**) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/75dpi/,
        /usr/share/fonts/misc/,
        /usr/share/fonts/75dpi/
[   168.529] (**) ModulePath set to "/usr/lib/xorg/modules"
[   168.529] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse
' will be disabled.
[   168.529] (WW) Disabling Mouse0
[   168.530] (WW) Disabling Keyboard0
[   168.548] (II) Loader magic: 0x82a1620
[   168.548] (II) Module ABI versions:
[   168.548]    X.Org ANSI C Emulation: 0.4
[   168.548]    X.Org Video Driver: 13.0
[   168.548]    X.Org XInput driver : 18.0
[   168.548]    X.Org Server Extension : 7.0
[   168.549] (II) config/udev: Adding drm device (/dev/dri/card0)
[   168.552] (--) PCI:*(0:1:0:0) 5333:8c2e:1014:01fc rev 5, Mem @ 0xc0100000/524288,
0xe8000000/67108864, 0xe4000000/67108864, 0xe0000000/33554432, BIOS @ 0x????????/6553
6
[   168.553] (II) Open ACPI successful (/var/run/acpid.socket)
[   168.554] Initializing built-in extension Generic Event Extension
[   168.554] Initializing built-in extension SHAPE
[   168.555] Initializing built-in extension MIT-SHM
[   168.555] Initializing built-in extension XInputExtension
[   168.555] Initializing built-in extension XTEST
[   168.555] Initializing built-in extension BIG-REQUESTS
[   168.555] Initializing built-in extension SYNC
[   168.556] Initializing built-in extension XKEYBOARD
[   168.556] Initializing built-in extension XC-MISC
[   168.556] Initializing built-in extension XINERAMA
[   168.556] Initializing built-in extension XFIXES
[   168.557] Initializing built-in extension RENDER
[   168.557] Initializing built-in extension RANDR
[   168.557] Initializing built-in extension COMPOSITE
[   168.557] Initializing built-in extension DAMAGE
[   168.557] Initializing built-in extension MIT-SCREEN-SAVER
[   168.558] Initializing built-in extension DOUBLE-BUFFER
[   168.558] Initializing built-in extension RECORD
[   168.558] Initializing built-in extension DPMS
[   168.564] Initializing built-in extension X-Resource
[   168.570] Initializing built-in extension XVideo
[   168.576] Initializing built-in extension XVideo-MotionCompensation
[   168.582] Initializing built-in extension XFree86-VidModeExtension
[   168.588] Initializing built-in extension XFree86-DGA
[   168.593] Initializing built-in extension XFree86-DRI
[   168.599] Initializing built-in extension DRI2
[   168.599] (II) "glx" will be loaded. This was enabled by default and also specifie
d in the config file.
[   168.599] (II) LoadModule: "dri"
[   168.599] (II) Module "dri" already built-in
[   168.599] (II) LoadModule: "extmod"
[   168.599] (II) Module "extmod" already built-in
[   168.599] (II) LoadModule: "dbe"
[   168.599] (II) Module "dbe" already built-in
[   168.599] (II) LoadModule: "record"
[   168.599] (II) Module "record" already built-in
[   168.599] (II) LoadModule: "glx"
[   168.686] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   168.719] (II) Module glx: vendor="X.Org Foundation"
[   168.719]    compiled for 1.13.0, module version = 1.0.0
[   168.719]    ABI class: X.Org Server Extension, version 7.0
[   168.719] (==) AIGLX enabled
[   168.725] Loading extension GLX
[   168.725] (II) LoadModule: "savage"
[   168.740] (II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
[   168.770] (II) Module savage: vendor="X.Org Foundation"
[   168.770]    compiled for 1.13.0, module version = 2.3.6
[   168.770]    Module class: X.Org Video Driver
[   168.770]    ABI class: X.Org Video Driver, version 13.0
[   168.771] (II) SAVAGE: driver (version 2.3.6) for S3 Savage chipsets: Savage4,
        Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
        Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
        Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
        SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
        SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
        SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
[   168.771] (--) using VT number 7

[   168.794] (II) Loading sub module "vgahw"
[   168.794] (II) LoadModule: "vgahw"
[   168.795] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   168.815] (II) Module vgahw: vendor="X.Org Foundation"
[   168.815]    compiled for 1.13.0, module version = 0.1.0
[   168.815]    ABI class: X.Org Video Driver, version 13.0
[   168.815] (==) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
[   168.815] (==) SAVAGE(0): RGB weight 888
[   168.815] (==) SAVAGE(0): Default visual is TrueColor
[   168.815] (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   168.815] (==) SAVAGE(0): Using XAA acceleration architecture
[   168.815] (==) SAVAGE(0): Using HW cursor
[   168.816] (==) SAVAGE(0): Using video BIOS to set modes
[   168.816] (II) Loading sub module "vbe"
[   168.816] (II) LoadModule: "vbe"
[   168.816] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   168.827] (II) Module vbe: vendor="X.Org Foundation"
[   168.827]    compiled for 1.13.0, module version = 1.1.0
[   168.827]    ABI class: X.Org Video Driver, version 13.0
[   168.827] (II) Loading sub module "int10"
[   168.827] (II) LoadModule: "int10"
[   168.828] (II) Loading /usr/lib/xorg/modules/libint10.so
[   168.848] (II) Module int10: vendor="X.Org Foundation"
[   168.848]    compiled for 1.13.0, module version = 1.0.0
[   168.848]    ABI class: X.Org Video Driver, version 13.0
[   168.848] (II) SAVAGE(0): initializing int10
[   170.314] (II) SAVAGE(0): VESA BIOS detected
[   170.314] (II) SAVAGE(0): VESA VBE Version 2.0
[   170.314] (II) SAVAGE(0): VESA VBE Total Mem: 15168 kB
[   170.314] (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Paramont BIOS
[   170.314] (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
[   170.314] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
[   170.315] (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
[   170.315] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0
[   170.315] (--) SAVAGE(0): Chip: id 8c2e, "SuperSavage/IXC 64"
[   170.315] (--) SAVAGE(0): Engine: "SuperSavage"
[   170.315] (--) SAVAGE(0): AGP card detected
[   170.315] (==) SAVAGE(0): Using AGP DMA
[   170.315] (II) SAVAGE(0): DMA is not supported on SuperSavages.
[   170.315] (==) SAVAGE(0): DMA disabled
[   170.315] (==) SAVAGE(0): Using AGP 1x mode
[   170.315] (==) SAVAGE(0): Using 16 MB AGP aperture
[   170.317] (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
[   170.317] (--) SAVAGE(0): probed videoram:  16384k
[   170.338] (II) Loading sub module "ddc"
[   170.338] (II) LoadModule: "ddc"
[   170.338] (II) Module "ddc" already built-in
[   171.266] (--) SAVAGE(0): No DDC signal
[   171.266] (II) Loading sub module "i2c"
[   171.266] (II) LoadModule: "i2c"
[   171.266] (II) Module "i2c" already built-in
[   171.281] (II) SAVAGE(0): I2C bus "I2C bus" initialized.
[   171.281] (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
[   171.285] (--) SAVAGE(0): Detected current MCLK value of 286.364 MHz
[   171.285] (--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
[   171.285] (--) SAVAGE(0): - Limiting video mode to 1024x768
[   171.299] (--) SAVAGE(0): Found 13 modes at this depth:
[   171.299]     [10f] 320 x 200, 70Hz
[   171.299]     [112] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[   171.299]     [115] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[   171.299]     [118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz
[   171.299]     [11b] 1280 x 1024, 60Hz, 75Hz, 85Hz
[   171.299]     [11e] 640 x 400, 70Hz
[   171.299]     [124] 1600 x 1200, 60Hz, 75Hz, 85Hz
[   171.299]     [134] 320 x 240, 72Hz
[   171.299]     [13e] 1400 x 1050, 60Hz, 75Hz
[   171.300]     [144] 400 x 300, 72Hz
[   171.300]     [154] 512 x 384, 70Hz
[   171.300]     [175] 720 x 480, 75Hz
[   171.300]     [17f] 720 x 576, 75Hz
[   171.300] (II) SAVAGE(0): Monitor0: Using hsync range of 31.50-47.82 kHz
[   171.300] (II) SAVAGE(0): Monitor0: Using vrefresh range of 56.00-59.92 Hz
[   171.300] (II) SAVAGE(0): Monitor0: Using maximum pixel clock of 63.50 MHz
[   171.300] (II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x7
68
[   171.300] (II) SAVAGE(0): Clock range:  10.00 to 220.00 MHz
[   171.300] (--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
[   171.300] (--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
[   171.300] (--) SAVAGE(0): Chose mode 11e at 70Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
[   171.300] (--) SAVAGE(0): Chose mode 10f at 70Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
[   171.300] (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
[   171.300] (--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
[   171.300] (--) SAVAGE(0): Chose mode 112 at 60Hz.
[   171.300] (--) SAVAGE(0): Chose mode 134 at 72Hz.
[   171.300] (--) SAVAGE(0): Chose mode 112 at 72Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[   171.300] (--) SAVAGE(0): Chose mode 134 at 72Hz.
[   171.300] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
[   171.300] (--) SAVAGE(0): Chose mode 112 at 75Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 134 at 72Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 112 at 85Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 134 at 72Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[   171.301] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.301] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[   171.301] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.301] (--) SAVAGE(0): Chose mode 115 at 72Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 115 at 75Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
[   171.301] (--) SAVAGE(0): Chose mode 115 at 85Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[   171.301] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
[   171.301] (--) SAVAGE(0): Chose mode 118 at 85Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "1024x768i" (vrefresh out of rang
e)
[   171.301] (--) SAVAGE(0): Chose mode 154 at 70Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "512x384i" (vrefresh out of range
)
[   171.301] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.301] (--) SAVAGE(0): Chose mode 154 at 70Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[   171.301] (--) SAVAGE(0): Chose mode 118 at 70Hz.
[   171.301] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.302] (--) SAVAGE(0): Chose mode 154 at 70Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[   171.302] (--) SAVAGE(0): Chose mode 118 at 75Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.302] (--) SAVAGE(0): Chose mode 154 at 70Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[   171.302] (--) SAVAGE(0): Chose mode 118 at 85Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.302] (--) SAVAGE(0): Chose mode 154 at 70Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
[   171.302] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for v
irtual size)
[   171.302] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
[   171.302] (II) SAVAGE(0): Not using default mode "1280x960" (width too large for v
irtual size)
[   171.302] (--) SAVAGE(0): Chose mode 112 at 60Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
[   171.302] (II) SAVAGE(0): Not using default mode "1280x960" (width too large for v
irtual size)
[   171.302] (--) SAVAGE(0): Chose mode 112 at 85Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
[   171.302] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size)
[   171.302] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
[   171.302] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size)
[   171.302] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
[   171.302] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size)
[   171.302] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
[   171.302] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
[   171.302] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[   171.302] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
[   171.302] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[   171.302] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[   171.302] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): Chose mode 115 at 72Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[   171.303] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): Chose mode 115 at 75Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[   171.303] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): Chose mode 115 at 85Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
[   171.303] (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
[   171.303] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
[   171.303] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for
virtual size)
[   171.303] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
[   171.304] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
[   171.304] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for
virtual size)
[   171.304] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
[   171.304] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
[   171.304] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for
virtual size)
[   171.304] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[   171.304] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.304] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for
virtual size)
[   171.304] (--) SAVAGE(0): Chose mode 118 at 75Hz.
[   171.304] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.304] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for
virtual size)
[   171.304] (--) SAVAGE(0): Chose mode 118 at 85Hz.
[   171.304] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
[   171.304] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[   171.304] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[   171.304] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[   171.304] (--) SAVAGE(0): Chose mode 115 at 60Hz.
[   171.304] (--) SAVAGE(0): Chose mode 112 at 60Hz.
[   171.304] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.304] (--) SAVAGE(0): Chose mode 144 at 72Hz.
[   171.304] (--) SAVAGE(0): Chose mode 134 at 72Hz.
[   171.304] (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
[   171.304] (**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz
[   171.304] (II) SAVAGE(0): Modeline "1024x768"x59.9   56.00  1024 1072 1104 1184  7
68 771 775 790 +hsync -vsync (47.3 kHz ezP)
[   171.304] (**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[   171.304] (II) SAVAGE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 6
01 605 628 +hsync +vsync (37.9 kHz zd)
[   171.304] (**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[   171.304] (II) SAVAGE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 6
01 603 625 +hsync +vsync (35.2 kHz zd)
[   171.304] (**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[   171.304] (II) SAVAGE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 49
0 492 525 -hsync -vsync (31.5 kHz zd)
[   171.305] (**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[   171.305] (II) SAVAGE(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 30
0 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[   171.305] (**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[   171.305] (II) SAVAGE(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 30
0 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[   171.305] (**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[   171.305] (II) SAVAGE(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 24
5 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[   171.305] (==) SAVAGE(0): DPI set to (96, 96)
[   171.305] (II) Loading sub module "fb"
[   171.305] (II) LoadModule: "fb"
[   171.305] (II) Loading /usr/lib/xorg/modules/libfb.so
[   171.325] (II) Module fb: vendor="X.Org Foundation"
[   171.325]    compiled for 1.13.0, module version = 1.0.0
[   171.325]    ABI class: X.Org ANSI C Emulation, version 0.4
[   171.325] (II) Loading sub module "xaa"
[   171.325] (II) LoadModule: "xaa"
[   171.326] (WW) Warning, couldn't open module xaa
[   171.326] (II) UnloadModule: "xaa"
[   171.326] (II) Unloading xaa
[   171.326] (EE) SAVAGE: Failed to load module "xaa" (module does not exist, 0)
[   171.326] (II) SAVAGE(0): Falling back to shadowfb
[   171.326] (II) Loading sub module "ramdac"
[   171.327] (II) LoadModule: "ramdac"
[   171.327] (II) Module "ramdac" already built-in
[   171.327] (II) Loading sub module "shadowfb"
[   171.327] (II) LoadModule: "shadowfb"
[   171.327] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   171.336] (II) Module shadowfb: vendor="X.Org Foundation"
[   171.336]    compiled for 1.13.0, module version = 1.0.0
[   171.336]    ABI class: X.Org ANSI C Emulation, version 0.4
[   171.336] (--) Depth 24 pixmap format is 32 bpp
[   171.336] (II) Loading sub module "int10"
[   171.336] (II) LoadModule: "int10"
[   171.336] (II) Loading /usr/lib/xorg/modules/libint10.so
[   171.336] (II) Module int10: vendor="X.Org Foundation"
[   171.336]    compiled for 1.13.0, module version = 1.0.0
[   171.336]    ABI class: X.Org Video Driver, version 13.0
[   171.336] (II) SAVAGE(0): initializing int10
[   172.793] (II) SAVAGE(0): VESA BIOS detected
[   172.793] (II) SAVAGE(0): VESA VBE Version 2.0
[   172.793] (II) SAVAGE(0): VESA VBE Total Mem: 15168 kB
[   172.793] (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Paramont BIOS
[   172.793] (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
[   172.793] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
[   172.793] (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
[   172.793] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0
[   172.864] (EE) SAVAGE(0): DRI isn't enabled
[   172.864] (--) SAVAGE(0): Chose mode 118 at 60Hz.
[   173.457] (==) SAVAGE(0): Backing store disabled
[   173.460] (==) SAVAGE(0): DPMS enabled
[   173.460] (WW) SAVAGE(0): Direct rendering disabled
[   173.461] (==) RandR enabled
[   173.490] (II) AIGLX: Screen 0 is not DRI2 capable
[   173.490] (II) AIGLX: Screen 0 is not DRI capable
[   174.498] (II) AIGLX: Loaded and initialized swrast
[   174.498] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   175.278] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   175.278] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   175.278] (II) LoadModule: "evdev"
[   175.279] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   175.352] (II) Module evdev: vendor="X.Org Foundation"
[   175.352]    compiled for 1.12.99.905, module version = 2.7.3
[   175.353]    Module class: X.Org XInput Driver
[   175.353]    ABI class: X.Org XInput driver, version 18.0
[   175.353] (II) Using input driver 'evdev' for 'Power Button'
[   175.353] (**) Power Button: always reports core events
[   175.353] (**) evdev: Power Button: Device: "/dev/input/event2"
[   175.353] (--) evdev: Power Button: Vendor 0 Product 0x1
[   175.353] (--) evdev: Power Button: Found keys
[   175.353] (II) evdev: Power Button: Configuring as keyboard
[   175.353] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/inp
ut/input2/event2"
[   175.353] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD
, id 6)
[   175.353] (**) Option "xkb_rules" "evdev"
[   175.353] (**) Option "xkb_model" "evdev"
[   175.353] (**) Option "xkb_layout" "us"
[   175.423] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   175.423] (II) No input driver specified, ignoring this device.
[   175.423] (II) This device may have been added with another device file.
[   175.423] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   175.423] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   175.423] (II) Using input driver 'evdev' for 'Sleep Button'
[   175.424] (**) Sleep Button: always reports core events
[   175.424] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   175.424] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   175.424] (--) evdev: Sleep Button: Found keys
[   175.424] (II) evdev: Sleep Button: Configuring as keyboard
[   175.424] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C
0E:00/input/input1/event1"
[   175.424] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD
, id 7)
[   175.424] (**) Option "xkb_rules" "evdev"
[   175.424] (**) Option "xkb_model" "evdev"
[   175.424] (**) Option "xkb_layout" "us"
[   175.425] (II) config/udev: Adding drm device (/dev/dri/card0)
[   175.426] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/eve
nt5)
[   175.426] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[   175.426] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[   175.426] (**)  USB OPTICAL MOUSE: always reports core events
[   175.426] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event5"
[   175.426] (--) evdev:  USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4c
[   175.426] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[   175.426] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[   175.426] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[   175.426] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[   175.426] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[   175.426] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[   175.426] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[   175.426] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInert
ia: 10, EmulateWheelTimeout: 200
[   175.427] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb
2/2-1/2-1:1.0/input/input5/event5"
[   175.427] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MO
USE, id 8)
[   175.427] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[   175.428] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[   175.428] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[   175.428] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[   175.428] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[   175.429] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mou
se0)
[   175.429] (II) No input driver specified, ignoring this device.
[   175.429] (II) This device may have been added with another device file.
[   175.429] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev
/input/event3)
[   175.429] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard c
atchall"
[   175.429] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   175.429] (**) AT Translated Set 2 keyboard: always reports core events
[   175.430] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[   175.430] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   175.430] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   175.430] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   175.430] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input
/input3/event3"
[   175.430] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
 (type: KEYBOARD, id 9)
[   175.430] (**) Option "xkb_rules" "evdev"
[   175.430] (**) Option "xkb_model" "evdev"
[   175.430] (**) Option "xkb_layout" "us"
[   175.431] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/
event6)
[   175.431] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[   175.431] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[   175.432] (**) TPPS/2 IBM TrackPoint: always reports core events
[   175.432] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[   175.432] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[   175.432] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[   175.432] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[   175.432] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[   175.432] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[   175.432] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[   175.432] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelIn
ertia: 10, EmulateWheelTimeout: 200
[   175.432] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input
/input6/event6"
[   175.432] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type:
 MOUSE, id 10)
[   175.432] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[   175.432] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[   175.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[   175.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   175.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   175.433] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/
mouse1)
[   175.433] (II) No input driver specified, ignoring this device.
[   175.433] (II) This device may have been added with another device file.
[   175.434] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input
/event4)
[   175.434] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchal
l"
[   175.434] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[   175.435] (**) ThinkPad Extra Buttons: always reports core events
[   175.435] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[   175.435] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
[   175.435] (--) evdev: ThinkPad Extra Buttons: Found keys
[   175.435] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[   175.435] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/inpu
t/input4/event4"
[   175.435] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type
: KEYBOARD, id 11)
[   175.435] (**) Option "xkb_rules" "evdev"
[   175.435] (**) Option "xkb_model" "evdev"
[   175.435] (**) Option "xkb_layout" "us"
[   198.864] (II) evdev: ThinkPad Extra Buttons: Close
[   198.865] (II) UnloadModule: "evdev"
[   198.865] (II) evdev: TPPS/2 IBM TrackPoint: Close
[   198.865] (II) UnloadModule: "evdev"
[   175.432] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[   175.432] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[   175.432] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[   175.432] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelIn
ertia: 10, EmulateWheelTimeout: 200
[   175.432] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input
/input6/event6"
[   175.432] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type:
 MOUSE, id 10)
[   175.432] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[   175.432] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[   175.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[   175.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   175.433] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   175.433] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/
mouse1)
[   175.433] (II) No input driver specified, ignoring this device.
[   175.433] (II) This device may have been added with another device file.
[   175.434] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input
/event4)
[   175.434] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchal
l"
[   175.434] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[   175.435] (**) ThinkPad Extra Buttons: always reports core events
[   175.435] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[   175.435] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
[   175.435] (--) evdev: ThinkPad Extra Buttons: Found keys
[   175.435] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[   175.435] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/inpu
t/input4/event4"
[   175.435] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type
: KEYBOARD, id 11)
[   175.435] (**) Option "xkb_rules" "evdev"
[   175.435] (**) Option "xkb_model" "evdev"
[   175.435] (**) Option "xkb_layout" "us"
[   198.864] (II) evdev: ThinkPad Extra Buttons: Close
[   198.865] (II) UnloadModule: "evdev"
[   198.865] (II) evdev: TPPS/2 IBM TrackPoint: Close
[   198.865] (II) UnloadModule: "evdev"
[   198.865] (II) evdev: AT Translated Set 2 keyboard: Close
[   198.865] (II) UnloadModule: "evdev"
[   198.865] (II) evdev:  USB OPTICAL MOUSE: Close
[   198.865] (II) UnloadModule: "evdev"
[   198.865] (II) evdev: Sleep Button: Close
[   198.865] (II) UnloadModule: "evdev"
[   198.865] (II) evdev: Power Button: Close
[   198.865] (II) UnloadModule: "evdev"
[   199.490] Server terminated successfully (0). Closing log file.

_________________
Unix is user friendly. It is only careful selecting its friends.
Back to top
View user's profile Send private message
audiodef
Watchman
Watchman


Joined: 06 Jul 2005
Posts: 5282

PostPosted: Wed Oct 03, 2012 2:53 pm    Post subject: Reply with quote

Try this:

Code:

su
qlist -IC x11-drivers/


Then re-emerge everything in the output of the above command. It's possible Xorg was upgraded, and you need to recompile all input device and video drivers when that happens.
_________________
Gentoo Studio: http://gentoostudio.org
Facebook: http://www.facebook.com/gentoostudio
G+: https://plus.google.com/113947758237122861689/posts
Pappy's Kernel Seeds: http://kernel-seeds.org
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 1678
Location: Berlin, Germany

PostPosted: Thu Oct 04, 2012 12:29 am    Post subject: Reply with quote

xorg-server-1.13 removed support for XAA. This means that drivers are going to fall back to shadowfb, and bugs in that get now exposed. (For example in the neomagic driver.)

Check if setting AccelMethod to EXA helps.
Back to top
View user's profile Send private message
multix
Apprentice
Apprentice


Joined: 28 Nov 2004
Posts: 177
Location: Italy

PostPosted: Fri Oct 05, 2012 9:36 pm    Post subject: Reply with quote

Hmm, how do I enable EXA ?
_________________
Unix is user friendly. It is only careful selecting its friends.
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4683
Location: Saint Amant, Acadiana

PostPosted: Fri Oct 05, 2012 9:55 pm    Post subject: Reply with quote

multix wrote:
Hmm, how do I enable EXA ?


Dude! Click me!
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 1678
Location: Berlin, Germany

PostPosted: Fri Oct 05, 2012 9:56 pm    Post subject: Reply with quote

See "man savage"
Back to top
View user's profile Send private message
multix
Apprentice
Apprentice


Joined: 28 Nov 2004
Posts: 177
Location: Italy

PostPosted: Sat Oct 06, 2012 6:45 pm    Post subject: Reply with quote

Ok, thanks. I was running without xorg.conf since a long time now, I needed that to add the option.

I do specify XAA and Xorg.0.log confirms this with saying "Using EXA acceleration architecture".

I do not have artefacts anymore, but the slowness is unbearable! moving xterm around is as slow as working with vnc over a slow network or something like that :)

At least I have video again.
_________________
Unix is user friendly. It is only careful selecting its friends.
Back to top
View user's profile Send private message
multix
Apprentice
Apprentice


Joined: 28 Nov 2004
Posts: 177
Location: Italy

PostPosted: Sun Oct 07, 2012 8:29 am    Post subject: Reply with quote

Checking the driver manpage and looking around, EXA acceleration should be supported and should work for supersavage. In fact it is enabled for me as the log says. Why do you have an almost unusable performance? Could be there something I need to enable that is now required and wasn't with XAA?

Thanks
_________________
Unix is user friendly. It is only careful selecting its friends.
Back to top
View user's profile Send private message
multix
Apprentice
Apprentice


Joined: 28 Nov 2004
Posts: 177
Location: Italy

PostPosted: Sun Oct 07, 2012 8:44 pm    Post subject: Reply with quote

glxgears confirms a performance around the 10-20fps! it drops inf act if just anything happens on the screen :) It should be around the 300fps range, according to a data side I found for Xorg...

Furthermore, I can't switch to a console while X is running (ctrl-alt-F1 for example), the diplsay wil be black or full with garbage characters. While it looks like Matrix, it is not very useful :)
_________________
Unix is user friendly. It is only careful selecting its friends.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum