Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
HDD spinup on AC plug (dis)connect
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
MalleRIM
Guru
Guru


Joined: 23 Jul 2007
Posts: 540
Location: Germany

PostPosted: Thu Sep 20, 2012 8:52 pm    Post subject: HDD spinup on AC plug (dis)connect Reply with quote

Hi,
Because I have an mSATA SSD in my laptop that contains the system, home, efi system partition and swap, I configured the HDD to spin down after 10 mins using tlp. When I connect or disconnect the AC adapter (appearantly due to profile change), the HDD spins up, just to spin down again a minute later. On shutdown it also spins up, right at the end. There is no data on the HDD, except for the freedos partition it came with, which is not mounted. I would really like to stop it from doing that to reduce wear.

Cheers,
Malle

Code:
[ 6633.524752] ata1.00: exception Emask 0x40 SAct 0x0 SErr 0x40800 action 0x6
[ 6633.524762] ata1.00: irq_stat 0x40000001
[ 6633.524771] ata1: SError: { HostInt CommWake }
[ 6633.524780] ata1.00: failed command: SET FEATURES
[ 6633.524815] ata1.00: cmd ef/c2:00:00:00:00/00:00:00:00:00/40 tag 0
[ 6633.524819]          res 51/04:00:00:00:00/00:00:00:00:00/40 Emask 0x41 (internal error)
[ 6633.524828] ata1.00: status: { DRDY ERR }
[ 6633.524835] ata1.00: error: { ABRT }
[ 6633.524848] ata1: hard resetting link
[ 6633.829385] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6633.829899] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6633.829910] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6633.829919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6633.830738] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6633.830741] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6633.830744] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6633.831070] ata1.00: configured for UDMA/100
[ 6633.831132] ata1: EH complete
[ 6633.831431] ata1: hard resetting link
[ 6634.135922] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6634.136428] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6634.136438] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6634.136446] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6634.137282] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6634.137295] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6634.137305] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6634.137654] ata1.00: configured for UDMA/100
[ 6634.137715] ata1: EH complete
[ 6634.145620] ata2: hard resetting link
[ 6634.449452] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6634.451140] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6634.451151] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6634.451160] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6634.870163] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[ 6634.870173] thinkpad_acpi: unhandled HKEY event 0x6040
[ 6634.870178] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[ 6636.364574] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6636.364587] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6636.364595] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6636.367268] ata2.00: configured for UDMA/133
[ 6636.367677] ata2: EH complete
[ 6636.408711] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
[ 6636.434073] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
[ 6688.569174] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[ 6688.569183] thinkpad_acpi: unhandled HKEY event 0x6040
[ 6688.569189] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[ 6688.665033] ata1.00: configured for UDMA/100
[ 6688.665043] ata1: EH complete
[ 6688.665358] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6690.577371] ata2.00: configured for UDMA/133
[ 6690.577382] ata2: EH complete
[ 6690.577560] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6690.609924] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
[ 6690.620296] EXT4-fs (sda3): re-mounted. Opts: discard,commit=600


this is what dmesg says. 6633-6636 is AC disconnect, 6688-6690 is AC connect. I had to wait for the HDD to spin down again, otherwise the second part would be smaller.

actually ata2 is the hdd, but it seems there is something wrong with the ssd as well... everything is running smooth though.
Back to top
View user's profile Send private message
Ant P.
Advocate
Advocate


Joined: 18 Apr 2009
Posts: 2403
Location: UK

PostPosted: Thu Sep 20, 2012 9:29 pm    Post subject: Reply with quote

It looks like ACPI is trying to do something with disk security when it's unplugged. Take a look in the BIOS menu for disk-related options.
Back to top
View user's profile Send private message
MalleRIM
Guru
Guru


Joined: 23 Jul 2007
Posts: 540
Location: Germany

PostPosted: Fri Sep 21, 2012 8:38 am    Post subject: Reply with quote

the only disk related thing I can adjust is SATA mode (AHCI/Compatability)

edit: deactivating intel anti theft doesn't help either
Back to top
View user's profile Send private message
MalleRIM
Guru
Guru


Joined: 23 Jul 2007
Posts: 540
Location: Germany

PostPosted: Sat Sep 22, 2012 11:58 pm    Post subject: Reply with quote

bump
Back to top
View user's profile Send private message
Ant P.
Advocate
Advocate


Joined: 18 Apr 2009
Posts: 2403
Location: UK

PostPosted: Sun Sep 23, 2012 2:32 am    Post subject: Reply with quote

That anti-theft thing seems the most likely cause, but if that won't fix it then I'm out of ideas, sorry.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum