View previous topic :: View next topic |
Author |
Message |
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 12:38 am Post subject: |
|
|
DONAHUE wrote: | if you made /mnt/gentoo and have cd'ed into it run Code: | wget http://distfiles.gentoo.org/releases/amd64/autobuilds/current-stage3/stage3-amd64-20120621.tar.bz2 | check that ls /mnt/gentoo shows Quote: | stage3-amd64-20120621.tar.bz2 |
edited to add wget to command |
Its fine. Ive practically already memorized the command: "links http://www.gentoo.org/main/en/mi..."
By the way, what is the hardened version? Do you have any experience with it? I kind of like the thought of things being super safe. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 12:41 am Post subject: |
|
|
recommend keep it simple first time around and just use desktop of your choice profile for now _________________ Defund the FCC. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 12:46 am Post subject: |
|
|
mint ~ # as a prompt means you are in mint's home directory BTW
you want to be in /mnt/gentoo before links or wget
note in links you must find file and the use D to download it _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 12:47 am Post subject: |
|
|
It is downloaded. For some reason it wont confirm the md5sum
mint gentoo # md5sum -c stage3-amd64-20120621.tar.bz2.DIGESTS
md5sum: stage3-amd64-20120621.tar.bz2.DIGESTS: No such file or directory
mint gentoo # ls
boot lost+found stage3-amd64-20120621.tar.bz2 |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 12:51 am Post subject: |
|
|
DONAHUE wrote: | mint ~ # as a prompt means you are in mint's home directory BTW
you want to be in /mnt/gentoo before links or wget
note in links you must find file and the use D to download it |
Is it okay if I didn't use D to download? I followed the on screen prompts and those seemed to have done the job.
You can see in my previous comment that I downloaded the file. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 12:55 am Post subject: |
|
|
it's ok _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 1:30 am Post subject: |
|
|
I am currently configuring the make.conf file and there doesnt seem to be anything in it. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 1:33 am Post subject: |
|
|
there are two /etc/make.conf (old)and /etc/portage/make.conf (new)
wise counsel: leave USE="" blank
ignore mirrorselect _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 1:44 am Post subject: |
|
|
this is what it looks like:
http://i.imgur.com/YAkY4.png
what should i do?
edit: as a side note, those two movie player screens refuse to close. i do not have mouse and the right click on my touchpad is not responding in mint, so there is no other way (to my knowledge) of closing them. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 1:55 am Post subject: |
|
|
sorry forgot you are still outside chroot..
there are two /mnt/gentoo/etc/make.conf (old)and /mnt/gentoo/etc/portage/make.conf (new) are both blank? _________________ Defund the FCC. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 2:14 am Post subject: |
|
|
if this
Code: | nano -w /mnt/gentoo/etc/portage/make.conf |
is blank, close it, and run
Code: | mv /mnt/gentoo/etc/make.conf /mnt/gentoo/etc/portage/make.conf
nano -w /mnt/gentoo/etc/portage/make.conf
|
edit to:
Quote: | CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2" |
change 2 in j2 to 1 more than your number of cpu cores
ignore selecting mirrors, ctrl-x to exit nano, save changes, run Code: | nano /mnt/gentoo/etc/resolv.conf |
edit to Quote: | nameserver 8.8.8.8 |
Code: | lspci -k > /mnt/gentoo/lspcik |
enter the chroot, nominally:
Code: | mount /dev/sda3 /mnt/gentoo
mount /dev/sda1 /mnt/gentoo/boot
cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf
mount -t proc none /mnt/gentoo/proc
mount --rbind /sys /mnt/gentoo/sys
mount --rbind /dev /mnt/gentoo/dev
chroot /mnt/gentoo /bin/bash
env-update
source /etc/profile
export PS1="(chroot) $PS1"
emerge pciutils wgetpaste |
_________________ Defund the FCC.
Last edited by DONAHUE on Mon Sep 10, 2012 3:22 am; edited 2 times in total |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 2:26 am Post subject: |
|
|
try ctrl-c
if no luck close the terminal
open a terminal, cd /mnt/gentoo _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 2:35 am Post subject: |
|
|
ctrl c worked.
for nano /mnt/gentoo/etc/resolv.conf there was nothing there either. do i just type nameserver 8.8.8.8, save and close? |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 2:37 am Post subject: |
|
|
yes please _________________ Defund the FCC. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 2:44 am Post subject: |
|
|
after Code: | emerge pciutils wgetpaste | completes:
Code: | wgetpaste /proc/cpuinfo
wgetpaste /lspcik | and post the urls returned here _________________ Defund the FCC.
Last edited by DONAHUE on Mon Sep 10, 2012 3:23 am; edited 1 time in total |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 3:03 am Post subject: |
|
|
then proceed to step 6b of the handbook to step 7c; recommend not editing /etc/portage/make.conf to add use flags
after gentoo-sources have emerged get a reliable stripped down basic kernel configuration from pappy's kernel seeds
Code: | cd /usr/src/linux
wget http://kernel-seeds.org/seeds/64_bit/gentoo/3.4.9-gentoo-x86_64-08.config
mv 3.4.9-gentoo-x86_64-08.config .config |
this base configuration will not have drivers for the particular devices in the lenovo. lspci -k and cpuinfo will guide driver selection. _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 6:35 pm Post subject: |
|
|
this is the output of "mount"
Code: |
mint gentoo # mount
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/mint/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=mint)
/dev/sda6 on /mnt/gentoo type ext4 (rw)
/dev/sda3 on /mnt/gentoo/boot type ext2 (rw)
/dev/sda3 on /mnt/gentoo type ext2 (rw)
|
|
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 6:43 pm Post subject: |
|
|
mount looks fine to me, should be good to enter chroot. _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 7:38 pm Post subject: |
|
|
Code: | mint gentoo # cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf
cp: cannot stat `/etc/resolv.conf': No such file or directory
|
Was this also unnecessary? I am not sure whether or not I copied the DNS info yet (installing gentoo ch.6 part 1a) |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 7:55 pm Post subject: |
|
|
reading Quote: | /dev/sda6 on /mnt/gentoo type ext4 (rw)
/dev/sda3 on /mnt/gentoo/boot type ext2 (rw)
/dev/sda3 on /mnt/gentoo type ext2 (rw) | more closely
suggest Code: | umount /dev/sda3
mount /dev/sda3 /mnt/gentoo/boot
mount | to eliminate the apparent double mounting of /dev/sda3 then into the chroot _________________ Defund the FCC. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 8:03 pm Post subject: |
|
|
cp /etc/resolv .... failed so we bypassed by adopting the google public nameserver
Code: | nano /mnt/gentoo/etc/resolv.conf | should show Quote: | nameserver 8.8.8.8 | if not make it read so and ctrl-x to exit saving
then into chroot Code: | mount -t proc none /mnt/gentoo/proc
mount --rbind /sys /mnt/gentoo/sys
mount --rbind /dev /mnt/gentoo/dev
chroot /mnt/gentoo /bin/bash
env-update
source /etc/profile
export PS1="(chroot) $PS1"
emerge pciutils wgetpaste
wgetpaste /lspcik
wgetpaste /proc/cpuinfo | and post url's returned _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 8:09 pm Post subject: |
|
|
I was not able to check if nameserver 8.8.8.8 was inside of the resov.conf, but I was able to update portage, so I am guessing it is.
Also, wgetpaste command was not found...
Is that something I should apt-get install? |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Sep 10, 2012 8:18 pm Post subject: |
|
|
are you now in the chroot? being in the chroot will have you running gentoo inside mint, if you performed all steps your prompt will have changed and ls -l will show the portage snapshot and tarball plus the gentoo directories with yesterday and today dates, if emerge --sync ran you are in the chroot
if so Code: | emerge wgetpaste pciutils | should install those two programs for use in the gentoo system
apt-get is mint/ubuntu/ ; emerge is gentoo _________________ Defund the FCC. |
|
Back to top |
|
|
corellon n00b
Joined: 09 Aug 2012 Posts: 66
|
Posted: Mon Sep 10, 2012 8:27 pm Post subject: |
|
|
http://bpaste.net/show/44831/
http://bpaste.net/show/44832/
Heres my / contents:
Code: | (chroot) mint / # ls -l
total 187313
drwxr-xr-x 2 root root 4096 Jun 21 12:06 bin
drwxr-xr-x 3 root root 1024 Jun 21 02:45 boot
drwxr-xr-x 15 root root 4360 Sep 10 00:03 dev
drwxr-xr-x 29 root root 4096 Sep 10 20:21 etc
drwxr-xr-x 2 root root 4096 Jun 21 02:45 home
lrwxrwxrwx 1 root root 5 Jun 21 08:26 lib -> lib64
drwxr-xr-x 2 root root 4096 Jun 21 08:26 lib32
drwxr-xr-x 5 root root 4096 Jun 21 12:01 lib64
drwx------ 2 root root 16384 Sep 9 22:47 lost+found
-rw-r--r-- 1 root root 3288 Sep 9 22:40 lspcik
drwxr-xr-x 2 root root 4096 Jun 21 02:45 media
drwxr-xr-x 2 root root 4096 Jun 21 02:45 mnt
drwxr-xr-x 2 root root 4096 Jun 21 02:45 opt
-rw-r--r-- 1 root root 54048393 Sep 9 21:09 portage-latest.tar.bz2
dr-xr-xr-x 172 root root 0 Sep 9 14:47 proc
drwx------ 2 root root 4096 Jun 21 12:09 root
drwxr-xr-x 3 root root 4096 Jun 21 12:00 run
drwxr-xr-x 2 root root 4096 Jun 21 12:09 sbin
-rw-r--r-- 1 root root 137676875 Sep 9 20:41 stage3-amd64-20120621.tar.bz2
drwxr-xr-x 13 root root 0 Sep 9 14:47 sys
drwxrwxrwt 2 root root 4096 Sep 10 20:24 tmp
drwxr-xr-x 13 root root 4096 Sep 9 21:14 usr
drwxr-xr-x 9 root root 4096 Jun 21 02:45 var
|
Look good? |
|
Back to top |
|
|
|