View previous topic :: View next topic |
Author |
Message |
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Sun Sep 02, 2012 7:41 pm Post subject: pcmanfm problem[solved] |
|
|
Hi everyone i have a problem with pcmanfm. When i connect a usb and it mounts it automatically then pcmanfm is root and not user... Help
Last edited by pelargos on Sat Sep 22, 2012 8:43 am; edited 3 times in total |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Mon Sep 03, 2012 12:04 am Post subject: Re: pcmanfm problem |
|
|
pelargos wrote: | Hi everyone i have a problem with pcmanfm. When i connect a usb and it mounts it automatically then pcmanfm is root and not user... Help |
Sounds like a problem with consolekit. If you're using the desktop profile or any of the desktop subprofiles you most likely have consolekit installed if you haven't disabled the use flag.
Run the following command under your normal user account:
The output should contain the following line if consolekit is working properly:
active = TRUE
If not, you will need to rebuild your kernel with the following options enabled:
General setup --->
[*] Auditing support
[*] Enable system-call auditing support
Also make sure consolekit and dbus are in the default runlevel:
Code: | # rc-update add dbus default |
Code: | # rc-update add consolekit default |
After a reboot you should be able to automount devices under a normal user account.
Cheers! |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Mon Sep 03, 2012 12:01 pm Post subject: Re: pcmanfm problem |
|
|
DanneStrat wrote: | pelargos wrote: | Hi everyone i have a problem with pcmanfm. When i connect a usb and it mounts it automatically then pcmanfm is root and not user... Help |
Sounds like a problem with consolekit. If you're using the desktop profile or any of the desktop subprofiles you most likely have consolekit installed if you haven't disabled the use flag.
Run the following command under your normal user account:
The output should contain the following line if consolekit is working properly:
active = TRUE
If not, you will need to rebuild your kernel with the following options enabled:
General setup --->
[*] Auditing support
[*] Enable system-call auditing support
Also make sure consolekit and dbus are in the default runlevel:
Code: | # rc-update add dbus default |
Code: | # rc-update add consolekit default |
After a reboot you should be able to automount devices under a normal user account.
Cheers! |
It says this but still doesn't work:
Session1:
unix-user = '1000'
realname = '(null)'
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0.0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2012-09-03T06:32:49.054804Z'
login-session-id = '8'
I also have the right kernel config. |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Mon Sep 03, 2012 4:19 pm Post subject: |
|
|
Good thing consolekit works. Could you tell me a little more about your gentoo setup (display manager, window manager, desktop environment etc.) |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Tue Sep 04, 2012 11:48 am Post subject: |
|
|
DanneStrat wrote: | Good thing consolekit works. Could you tell me a little more about your gentoo setup (display manager, window manager, desktop environment etc.) |
i use xfce and pcmanfm. |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Tue Sep 04, 2012 9:45 pm Post subject: |
|
|
pelargos,
You will need to make some configuration changes for polkit (formerly policykit) to allow your user to perform udisks actions.
First make sure you have the following options enabled in your kernel and rebuild:
Power management and ACPI options --->
[*] Run-time PM core functionality (must be set in order for the below option to appear)
Device Drivers --->
[*] USB support --->
[*] USB runtime power management (autosuspend) and wakeup
(needed by udisks)
Now we continue with polkit configuration. See "man pklocalauthority" for more info.
We will create a configuration file that allows your chosen user(s)/user groups to perform certain udisks actions (you can choose what actions you want to allow):
(available actions are available in /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.) I will list some example configurations below and you can choose one that suit your needs:
Example 1:
To allow users that are members of the "users" group to perform all available udisks actions you can create the following configuration:
Code: | # nano -w /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users.pkla |
[Udisks allow users in users group]
Identity=unix-group:users
Action=org.freedesktop.udisks.*
ResultAny=yes
Afterwards you can add your user(s) to the "users" group if they aren't already in there:
Code: | # gpasswd -a username users |
Or
Example 2:
If you want to allow users foobar1, foobar2 and foobar3 (replace with real usernames) to execute basic actions you could use:
[Udisks allow some user access]
Identity=unix-user:foobar1;unix-user:foobar2;unix-user:foobar3
Action=org.freedesktop.udisks.filesystem-mount;org.freedesktop.udisks.filesystem-mount-system-internal;org.freedesktop.udisks.drive-eject;org.freedesktop.udisks.drive-detach
ResultAny=yes
(ResultAny=yes allows user access without authenticating)
You can also change the configuration to your liking. You could for example use the "wheel" group instead of the "users" group or allow all actions for your user only.
I hope this will help you. Let me know if any problems persist. |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Wed Sep 05, 2012 12:51 pm Post subject: |
|
|
DanneStrat wrote: | pelargos,
You will need to make some configuration changes for polkit (formerly policykit) to allow your user to perform udisks actions.
First make sure you have the following options enabled in your kernel and rebuild:
Power management and ACPI options --->
[*] Run-time PM core functionality (must be set in order for the below option to appear)
Device Drivers --->
[*] USB support --->
[*] USB runtime power management (autosuspend) and wakeup
(needed by udisks)
Now we continue with polkit configuration. See "man pklocalauthority" for more info.
We will create a configuration file that allows your chosen user(s)/user groups to perform certain udisks actions (you can choose what actions you want to allow):
(available actions are available in /usr/share/polkit-1/actions/org.freedesktop.udisks.policy.) I will list some example configurations below and you can choose one that suit your needs:
Example 1:
To allow users that are members of the "users" group to perform all available udisks actions you can create the following configuration:
Code: | # nano -w /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users.pkla |
[Udisks allow users in users group]
Identity=unix-group:users
Action=org.freedesktop.udisks.*
ResultAny=yes
Afterwards you can add your user(s) to the "users" group if they aren't already in there:
Code: | # gpasswd -a username users |
Or
Example 2:
If you want to allow users foobar1, foobar2 and foobar3 (replace with real usernames) to execute basic actions you could use:
[Udisks allow some user access]
Identity=unix-user:foobar1;unix-user:foobar2;unix-user:foobar3
Action=org.freedesktop.udisks.filesystem-mount;org.freedesktop.udisks.filesystem-mount-system-internal;org.freedesktop.udisks.drive-eject;org.freedesktop.udisks.drive-detach
ResultAny=yes
(ResultAny=yes allows user access without authenticating)
You can also change the configuration to your liking. You could for example use the "wheel" group instead of the "users" group or allow all actions for your user only.
I hope this will help you. Let me know if any problems persist. |
All the configs are ok except from this error:
[ Error writing /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users. ] |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Wed Sep 05, 2012 9:22 pm Post subject: |
|
|
Quote: | All the configs are ok except from this error:
[ Error writing /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users. ] |
You need to be root to create the file:
enter root password.
Then:
Code: | nano -w /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users.pkla |
Enter your configurations.
Press ctrl+x to exit and choose to save changes. |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Wed Sep 05, 2012 9:43 pm Post subject: |
|
|
DanneStrat wrote: | Quote: | All the configs are ok except from this error:
[ Error writing /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users. ] |
You need to be root to create the file:
enter root password.
Then:
Code: | nano -w /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users.pkla |
Enter your configurations.
Press ctrl+x to exit and choose to save changes. |
but i am as root |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Wed Sep 05, 2012 10:01 pm Post subject: |
|
|
Quote: | All the configs are ok except from this error:
[ Error writing /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users. ] |
Is this the complete error message? There should be an explanation for the error like Permission Denied etc. at the end of the message.
When you've finished your configuration file and want to save it try hitting ctrl+o to write out, hit enter when it asks for filename then exit with ctrl+x. You should be able to create that file as root.
If you still can't create it, either there is some problem with nano or with the directory permissions.
As root, list the directory permissions:
Code: | ls -l /etc/polkit-1/localauthority/ |
and post the output. |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Thu Sep 06, 2012 6:50 am Post subject: |
|
|
DanneStrat wrote: | Quote: | All the configs are ok except from this error:
[ Error writing /etc/polkit-1/localauthority/50-local.d/10-udisks-allow-users. ] |
Is this the complete error message? There should be an explanation for the error like Permission Denied etc. at the end of the message.
When you've finished your configuration file and want to save it try hitting ctrl+o to write out, hit enter when it asks for filename then exit with ctrl+x. You should be able to create that file as root.
If you still can't create it, either there is some problem with nano or with the directory permissions.
As root, list the directory permissions:
Code: | ls -l /etc/polkit-1/localauthority/ |
and post the output. |
It shows me this when i type ls -l /etc/polkit-1/localauthority/
ls: cannot access /etc/polkit-1/localauthority/: No such file or directory
Help :/ |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Thu Sep 06, 2012 9:15 am Post subject: |
|
|
Looks like polkit isn't installed since the directory doesn't exist.
to find out if the "policykit" use flag is set.
If it's not set, either set "policykit" as a global use flag or switch to the desktop profile which has the flag enabled by default:
Code: | # eselect profile list |
Code: | # eselect profile set X |
with X being the number of the desktop profile.
Update world to enable polkit support:
Code: | # emerge -avuDN world |
Now that you have polkit installed, repeat the configuration steps.
Good luck |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Thu Sep 06, 2012 1:38 pm Post subject: |
|
|
DanneStrat wrote: | Looks like polkit isn't installed since the directory doesn't exist.
to find out if the "policykit" use flag is set.
If it's not set, either set "policykit" as a global use flag or switch to the desktop profile which has the flag enabled by default:
Code: | # eselect profile list |
Code: | # eselect profile set X |
with X being the number of the desktop profile.
Update world to enable polkit support:
Code: | # emerge -avuDN world |
Now that you have polkit installed, repeat the configuration steps.
Good luck |
I did everything u said but i still get this error. :/ |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Thu Sep 06, 2012 2:55 pm Post subject: |
|
|
Does the parent directory exist i.e. /etc/polkit-1?
|
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Thu Sep 06, 2012 7:14 pm Post subject: |
|
|
DanneStrat wrote: | Does the parent directory exist i.e. /etc/polkit-1?
|
yes
Code: |
# ls -l /etc/
σύνολο 896
drwxr-xr-x 3 root root 4096 Ιούλ 19 10:57 acpi
drwxr-xr-x 2 root root 4096 Ιούλ 29 22:46 adobe
drwxr-xr-x 2 root root 4096 Αύγ 26 09:55 bash
-rw-r--r-- 1 root root 472 Αύγ 30 19:53 blkid.tab
-rw-r--r-- 1 root root 472 Αύγ 30 19:53 blkid.tab.old
drwxr-xr-x 2 root root 4096 Αύγ 7 03:39 bluetooth
drwxr-xr-x 2 root root 4096 Αύγ 6 23:40 bonobo-activation
drwxr-xr-x 3 root root 4096 Ιούν 21 13:47 ca-certificates
-rw-r--r-- 1 root root 6957 Ιούν 21 13:47 ca-certificates.conf
drwxr-xr-x 2 root root 4096 Σεπ 6 11:20 conf.d
drwxr-xr-x 5 root root 4096 Ιούλ 19 16:06 ConsoleKit
drwxr-xr-x 2 root root 4096 Ιούλ 19 17:54 cron.d
drwxr-x--- 2 root root 4096 Ιούλ 20 23:00 cron.daily
-rw-r--r-- 1 root root 220 Ιούλ 19 17:54 cron.deny
drwxr-x--- 2 root root 4096 Ιούλ 19 17:50 cron.hourly
drwxr-x--- 2 root root 4096 Ιούλ 19 17:50 cron.monthly
-rw-r--r-- 1 root root 608 Ιούλ 19 17:54 crontab
drwxr-x--- 2 root root 4096 Ιούλ 19 17:50 cron.weekly
-rw-r--r-- 1 root root 1506 Σεπ 6 11:22 csh.env
drwxr-xr-x 5 root lp 4096 Αύγ 30 19:23 cups
drwxr-xr-x 4 root root 4096 Σεπ 5 10:36 dbus-1
drwxr-xr-x 2 root root 4096 Ιούλ 19 11:03 default
-rw-r--r-- 1 root root 831 Ιούλ 19 17:50 dhcpcd.conf
-rw-r--r-- 1 root root 4670 Αύγ 26 10:59 DIR_COLORS
-rw-r--r-- 1 root root 2041 Αύγ 26 09:25 dispatch-conf.conf
-rw-r--r-- 1 root root 416 Ιούλ 19 13:55 dmtab
-rw-r--r-- 1 root root 138 Ιούν 21 14:57 e2fsck.conf
drwxr-xr-x 2 root root 4096 Αύγ 6 21:17 eclean
-rw-r--r-- 1 root root 1304 Αύγ 6 21:35 eixrc
drwxr-xr-x 7 root root 4096 Σεπ 5 15:05 env.d
-rw-r--r-- 1 root root 97 Ιούν 21 14:59 environment
drwxr-xr-x 3 root root 4096 Ιούλ 20 12:30 eselect
-rw-r--r-- 1 root root 2000 Αύγ 26 09:25 etc-update.conf
-rw-r--r-- 1 root root 399 Απρ 5 2007 filesystems
drwxr-xr-x 4 root root 4096 Ιούλ 19 14:38 fonts
drwxr-xr-x 3 root root 4096 Αύγ 7 00:08 foomatic
-rw-r--r-- 1 root root 1091 Σεπ 4 10:33 fstab
-rw-r--r-- 1 root root 216 Αύγ 4 20:55 fuse.conf
-rw-r--r-- 1 root root 2917 Αύγ 26 09:52 gai.conf
drwxr-xr-x 7 root root 4096 Αύγ 7 03:38 gconf
-rw-r--r-- 1 root root 31 Ιούν 21 10:31 gentoo-release
-rw-r--r-- 1 root root 588 Αύγ 3 11:37 GeoIP.conf
-rw-r--r-- 1 root root 698 Αύγ 7 22:22 ggz.modules
drwxr-xr-x 3 root root 4096 Ιούλ 20 22:45 gimp
drwxr-xr-x 3 root root 4096 Αύγ 7 03:41 gnome-vfs-2.0
-rw-r--r-- 1 root root 10793 Αύγ 6 23:27 gnome-vfs-mime-magic
drwxr-xr-x 2 root root 4096 Ιούν 21 13:49 gpm
-rw-r--r-- 1 root root 750 Σεπ 5 10:25 group
-rw------- 1 root root 750 Σεπ 2 10:50 group-
-r-------- 1 root root 613 Σεπ 5 10:25 gshadow
-rw------- 1 root root 613 Σεπ 2 10:50 gshadow-
drwxr-xr-x 4 root root 4096 Αύγ 6 23:52 gtk-2.0
drwxr-xr-x 2 root root 4096 Αύγ 6 23:57 gtk-3.0
-rw-r--r-- 1 root root 936 Αύγ 26 09:52 host.conf
-rw-r--r-- 1 root root 1061 Απρ 5 2007 hosts
drwxr-xr-x 2 root root 4096 Ιούλ 20 12:30 htdig
drwxr-xr-x 2 root root 4096 Αύγ 7 10:07 ImageMagick
drwxr-xr-x 2 root root 4096 Σεπ 6 11:20 init.d
-rw-r--r-- 1 root root 1894 Ιούν 21 10:32 inittab
-rw-r--r-- 1 root root 1855 Φεβ 14 2010 inputrc
-rw-r--r-- 1 root root 30 Απρ 5 2007 issue
-rw-r--r-- 1 root root 701 Απρ 5 2007 issue.logo
drwxr-xr-x 2 root root 4096 Αύγ 26 15:14 java-config-2
drwxr-xr-x 3 root root 4096 Ιούν 21 10:32 kernel
-r--r----- 1 root root 261 Αύγ 7 03:35 ldap.conf.sudo
-rw-r--r-- 1 root root 177910 Σεπ 6 11:22 ld.so.cache
-rw-r--r-- 1 root root 456 Σεπ 5 11:06 ld.so.conf
drwxr-xr-x 2 root root 4096 Αύγ 26 10:02 ld.so.conf.d
drwxr-xr-x 2 root root 4096 Ιούν 21 15:01 local.d
-rw-r--r-- 1 root root 294 Αύγ 26 12:00 locale2.gen
-rw-r--r-- 1 root root 950 Αύγ 26 12:00 locale.gen
-rw-r--r-- 1 root root 2245 Αύγ 26 12:01 localtime
-rw-r--r-- 1 root root 10447 Ιούν 21 15:06 login.defs
drwxr-xr-x 2 root root 4096 Αύγ 26 09:55 logrotate.d
-rw-r--r-- 1 root root 20 Σεπ 2 10:50 lsb-release
drwxr-xr-x 2 root root 4096 Ιούλ 19 13:55 lvm
-rw-r--r-- 1 root root 33 Ιούλ 19 14:03 machine-id
drwxr-xr-x 2 root root 4096 Ιούλ 19 11:05 mail
-rw-r--r-- 1 root root 2235 Ιούλ 19 11:05 mailcap
-rw-r--r-- 1 root root 1848 Σεπ 6 11:12 make.conf
-rw-r--r-- 1 root root 539 Ιούν 21 10:12 make.conf.catalyst
lrwxrwxrwx 1 root root 40 Αύγ 26 09:25 make.globals -> ../usr/share/portage/config/make.globals
lrwxrwxrwx 1 root root 56 Αύγ 6 16:53 make.profile -> ../usr/portage/profiles/default/linux/amd64/10.0/desktop
-rw-r--r-- 1 root root 4630 Ιούν 21 14:13 man.conf
-rw-r--r-- 1 root root 45100 Ιούν 21 10:19 mime.types
-rw-r--r-- 1 root root 956 Ιούν 21 14:57 mke2fs.conf
drwxr-xr-x 2 root root 4096 Σεπ 5 15:02 modprobe.d
drwxr-xr-x 2 root root 4096 Αύγ 6 23:34 mplayer
drwxr-xr-x 2 root root 4096 Σεπ 6 10:37 mplayer2
-rw-r--r-- 1 root root 1081 Σεπ 6 16:44 mtab
-rw-r--r-- 1 root root 8728 Αύγ 28 11:32 nanorc
-rw-r--r-- 1 root root 231 Οκτ 12 2007 networks
-rw-r--r-- 1 root root 1158 Αύγ 26 09:52 nscd.conf
-rw-r--r-- 1 root root 508 Αύγ 26 09:52 nsswitch.conf
drwxr-xr-x 2 root root 4096 Ιούλ 19 16:32 obex-data-server
drwxr-xr-x 3 root root 4096 Ιούλ 19 22:42 OpenCL
drwxr-xr-x 3 root root 4096 Αύγ 7 03:37 openldap
drwxr-xr-x 2 root root 4096 Σεπ 6 10:25 pam.d
drwxr-xr-x 4 root root 4096 Ιούλ 21 22:47 pango
-rw-r--r-- 1 root root 3 Ιούλ 19 12:21 papersize
-rw-r--r-- 1 root root 1639 Σεπ 2 10:50 passwd
-rw------- 1 root root 1558 Ιούλ 30 12:18 passwd-
drwxr-xr-x 5 root root 4096 Ιούλ 19 14:34 pm
-rw-r--r-- 1 root root 104 Ιούλ 19 17:56 pmount.allow
-rw-r--r-- 1 root root 1867 Ιούλ 19 17:56 pmount.conf
drwxr-xr-x 3 root root 4096 Ιούλ 20 23:06 polkit-1
drwxr-xr-x 5 root root 4096 Αύγ 4 19:49 portage
-rw-r--r-- 1 root root 764 Σεπ 6 11:22 prelink.conf
-rw-r--r-- 1 root root 209 Αύγ 4 20:47 printcap
-rw-r--r-- 1 root root 2218 Ιούλ 3 2011 profile
drwxr-xr-x 2 root root 4096 Αύγ 26 15:14 profile.d
-rw-r--r-- 1 root root 1508 Σεπ 6 11:22 profile.env
-rw-r--r-- 1 root root 6108 Ιούν 20 2009 protocols
drwxr-xr-x 2 root root 4096 Ιούλ 20 00:35 qt4
-rw-r--r-- 1 root root 5055 Αύγ 29 08:33 rc.conf
-rw-r--r-- 1 root root 190 Σεπ 6 16:43 resolv.conf
drwxr-xr-x 2 root root 4096 Αύγ 26 15:14 revdep-rebuild
-rwxr-xr-x 1 root root 263 Ιούν 21 14:47 rmt
-rw-r--r-- 1 root root 1615 Αύγ 26 09:52 rpc
-rw-r--r-- 1 root root 405 Αύγ 26 09:55 rsyncd.conf
drwxr-xr-x 6 root root 4096 Ιούν 21 07:02 runlevels
-rw-r--r-- 1 root root 2441 Ιούν 21 10:28 sandbox.conf
drwxr-xr-x 2 root root 4096 Ιούλ 19 14:38 sandbox.d
drwxr-xr-x 2 root root 4096 Αύγ 6 23:16 sasl2
-rw------- 1 root root 262 Ιούν 21 15:06 securetty
drwxr-xr-x 4 root root 4096 Αύγ 26 15:14 security
-rw-r--r-- 1 root root 36141 Ιούν 26 2009 services
drwxr-xr-x 2 root root 4096 Αύγ 28 11:40 sgml
-rw-r----- 1 root root 767 Σεπ 2 10:50 shadow
-rw------- 1 root root 740 Ιούλ 30 12:18 shadow-
-rw-r--r-- 1 root root 118 Απρ 5 2007 shells
drwxr-xr-x 3 root root 4096 Αύγ 26 09:55 skel
-rw-r--r-- 1 root root 3439 Αύγ 6 17:01 slim.conf
drwxr-xr-x 3 root root 4096 Αύγ 7 04:46 sound
drwxr-xr-x 2 root root 4096 Αύγ 7 03:37 ssh
drwxr-xr-x 5 root root 4096 Ιούν 21 13:47 ssl
drwxr-xr-x 2 root root 4096 Αύγ 6 23:16 ssmtp
-r--r----- 1 root root 2849 Αύγ 7 03:35 sudoers
drwxr-x--- 2 root root 4096 Ιούλ 19 16:52 sudoers.d
-rw-r--r-- 1 root root 1458 Μάι 15 2007 sysctl.conf
drwxr-xr-x 3 root root 4096 Αύγ 6 23:28 syslog-ng
drwxr-xr-x 9 root root 4096 Ιούν 21 04:59 terminfo
-rw-r--r-- 1 root root 14 Αύγ 26 14:47 timezone
drwxr-xr-x 3 root root 4096 Σεπ 5 10:35 udev
drwxr-xr-x 3 root root 4096 Αύγ 6 23:04 unixODBC
drwxr-xr-x 2 root root 4096 Ιούλ 19 16:22 UPower
drwxr-xr-x 2 root root 4096 Ιούλ 19 17:47 wgetpaste.d
-rw-r--r-- 1 root root 4533 Αύγ 6 23:23 wgetrc
drwxr-xr-x 7 root root 4096 Αύγ 6 23:20 X11
drwxr-xr-x 8 root root 4096 Σεπ 4 11:30 xdg
drwxr-xr-x 2 root root 4096 Αύγ 26 15:12 xinetd.d
drwxr-xr-x 2 root root 4096 Αύγ 28 11:40 xml |
|
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Thu Sep 06, 2012 8:05 pm Post subject: |
|
|
So the parent directory exists but none of the subdirectories?
Also post:
Code: | ls -l /etc/polkit-1/ |
In my gentoo box it looks like this:
Quote: | $ ls -l /etc/polkit-1/
totalt 12
drwx------ 7 root root 4096 29 aug 14.26 localauthority
drwxr-xr-x 2 root root 4096 29 aug 14.26 localauthority.conf.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 nullbackend.conf.d
|
Quote: | # ls -l /etc/polkit-1/localauthority/
totalt 20
drwxr-xr-x 2 root root 4096 29 aug 22.01 10-vendor.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 20-org.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 30-site.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 50-local.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 90-mandatory.d
|
If you're missing these directories, I have no idea why. |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Thu Sep 06, 2012 8:13 pm Post subject: |
|
|
DanneStrat wrote: | So the parent directory exists but none of the subdirectories?
Also post:
Code: | ls -l /etc/polkit-1/ |
In my gentoo box it looks like this:
Quote: | $ ls -l /etc/polkit-1/
totalt 12
drwx------ 7 root root 4096 29 aug 14.26 localauthority
drwxr-xr-x 2 root root 4096 29 aug 14.26 localauthority.conf.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 nullbackend.conf.d
|
Quote: | # ls -l /etc/polkit-1/localauthority/
totalt 20
drwxr-xr-x 2 root root 4096 29 aug 22.01 10-vendor.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 20-org.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 30-site.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 50-local.d
drwxr-xr-x 2 root root 4096 29 aug 14.26 90-mandatory.d
|
If you're missing these directories, I have no idea why. |
Results: # ls -l /etc/polkit-1/
total 4
drwx------ 2 polkitd root 4096 Σεπ 6 10:25 rules.d |
|
Back to top |
|
|
DanneStrat n00b
Joined: 05 Jan 2012 Posts: 73
|
Posted: Thu Sep 06, 2012 9:42 pm Post subject: |
|
|
Ok that explains it all. Polkitd is managing your policykit setup (notice how the rules.d directory is owned by user polkitd). You will still be able to accomplish the same thing I described by configuring polkitd but the method seems to be different. If you're willing to wait, I could write a configuration for you. Have a look here for more info: http://www.freedesktop.org/software/polkit/docs/master/polkit.8.html |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Fri Sep 07, 2012 7:45 am Post subject: |
|
|
DanneStrat wrote: | Ok that explains it all. Polkitd is managing your policykit setup (notice how the rules.d directory is owned by user polkitd). You will still be able to accomplish the same thing I described by configuring polkitd but the method seems to be different. If you're willing to wait, I could write a configuration for you. Have a look here for more info: http://www.freedesktop.org/software/polkit/docs/master/polkit.8.html |
OK but i can't understand what should i do to connect the devices and i don't need to put passwd or root? |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Wed Sep 19, 2012 4:16 pm Post subject: |
|
|
pelargos wrote: | DanneStrat wrote: | Ok that explains it all. Polkitd is managing your policykit setup (notice how the rules.d directory is owned by user polkitd). You will still be able to accomplish the same thing I described by configuring polkitd but the method seems to be different. If you're willing to wait, I could write a configuration for you. Have a look here for more info: http://www.freedesktop.org/software/polkit/docs/master/polkit.8.html |
OK but i can't understand what should i do to connect the devices and i don't need to put passwd or root? |
Nevermind i opened pcmanfm as root went and created the text let's see... |
|
Back to top |
|
|
pelargos Tux's lil' helper
Joined: 06 Jul 2012 Posts: 129
|
Posted: Thu Sep 20, 2012 2:00 pm Post subject: |
|
|
Y it's ok |
|
Back to top |
|
|
|