Treborius
Guru
Joined: 18 Oct 2005
Posts: 526
Location: Berlin
|
 Posted: Sat Aug 11, 2012 12:13 am Post subject: Xorg seg-fault [solved] |
 |
|
hallo, ich habe hier ein Problem mit X und komme nicht weiter
es geht um einen Geode LX,
X hat mal wunderbar funktioniert, nun bekomme ich es nichtmehr zum laufen
wenn ich versuche X zu starten bekomme ich folgende Fehlermeldung :
| Code: |
AmdPciProbe: Probing for supported devices!
Unable to open /dev/cpu/0/msr: 2
Backtrace:
0: X (xorg_backtrace+0x50) [0xb78bc920]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
|
in der /var/log/Xorg.0.log steht eigentlich nix interessantes drin :
| Code: |
[ 3618.831] (II) GEODE(0): Not using default mode "960x720" (vrefresh out of range)
[ 3618.831] (II) GEODE(0): Not using default mode "2048x1536" (height too large for virtual size)
[ 3618.831] (II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
[ 3618.831] (II) GEODE(0): Not using default mode "2048x1536" (height too large for virtual size)
[ 3618.831] (II) GEODE(0): Not using default mode "1024x768" (vrefresh out of range)
[ 3618.831] (II) GEODE(0): Not using default mode "2048x1536" (height too large for virtual size)
[ 3618.831] (II) GEODE(0): Not using default mode "1024x768" (vrefresh out of range)
[ 3618.831] (II) GEODE(0): Printing probed modes for output default
[ 3618.831] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3618.831] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3618.831] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3618.831] (II) GEODE(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 3618.831] (II) GEODE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 3618.832] (II) GEODE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 3618.832] (II) GEODE(0): Output default connected
[ 3618.832] (II) GEODE(0): Using fuzzy aspect match for initial modes
[ 3618.832] (II) GEODE(0): Output default using initial mode 1024x768
[ 3618.832] (II) GEODE(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3618.832] (--) GEODE(0): Virtual size is 1024x1024 (pitch 0)
[ 3618.832] (**) GEODE(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 3618.832] (II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3618.832] (**) GEODE(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 3618.832] (II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3618.832] (**) GEODE(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 3618.833] (II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3618.833] (**) GEODE(0): Default mode "512x384": 32.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)
[ 3618.833] (II) GEODE(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 3618.833] (**) GEODE(0): Default mode "400x300": 20.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz (D)
[ 3618.833] (II) GEODE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 3618.833] (**) GEODE(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.1 Hz (D)
[ 3618.833] (II) GEODE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 3618.833] (==) GEODE(0): DPI set to (96, 96)
[ 3618.833] (II) Loading sub module "fb"
[ 3618.833] (II) LoadModule: "fb"
[ 3618.834] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3618.836] (II) Module fb: vendor="X.Org Foundation"
[ 3618.836] compiled for 1.12.2, module version = 1.0.0
[ 3618.836] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3618.836] (II) Loading sub module "exa"
[ 3618.836] (II) LoadModule: "exa"
[ 3618.837] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3618.838] (II) Module exa: vendor="X.Org Foundation"
[ 3618.838] compiled for 1.12.2, module version = 2.5.0
[ 3618.838] ABI class: X.Org Video Driver, version 12.0
[ 3618.838] (II) UnloadModule: "vesa"
[ 3618.838] (II) Unloading vesa
[ 3618.838] (II) UnloadModule: "fbdev"
[ 3618.838] (II) Unloading fbdev
[ 3618.838] (II) UnloadSubModule: "fbdevhw"
[ 3618.838] (II) Unloading fbdevhw
[ 3618.839]
[ 3618.839] Backtrace:
[ 3618.840] 0: X (xorg_backtrace+0x50) [0xb78bc920]
[ 3618.840]
[ 3618.841] Segmentation fault at address (nil)
[ 3618.841]
Fatal server error:
[ 3618.841] Caught signal 11 (Segmentation fault). Server aborting
[ 3618.842]
[ 3618.842]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3618.842] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3618.843]
[ 3618.844] Server terminated with error (1). Closing log file.
|
Das sagt mir erstmal nur, das bis zum Segmentation fault alles wunderbar läuft,
ein strace auf die ganze Sache lieferte mir dann das
| Code: |
open("/sys/class/pci_bus/0000:00/legacy_mem", O_RDWR|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/dev/mem", O_RDWR|O_CLOEXEC) = 7
mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0xa0) = 0xb7009000
close(7) = 0
--- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0} ---
|
ich tippe ja darauf, das die datei "/sys/class/pci_bus/0000:00/legacy_mem" existieren sollte
(tut sie nämlich nicht) und ich irgendwas im kernel vergessen hab
jemand ne ahnung wie ich weiter vorgehen sollte? google hat mir irgendwie nix gebracht ...
| Code: |
Portage 2.1.10.65 (hardened/linux/x86, gcc-4.5.3, glibc-2.14.1-r3, 3.0.6-gentoo-alix i586)
=================================================================
System uname: Linux-3.0.6-gentoo-alix-i586-Geode-TM-_Integrated_Processor_by_AMD_PCS-with-gentoo-2.1
Timestamp of tree: Tue, 07 Aug 2012 22:00:01 +0000
ccache version 3.1.7 [enabled]
app-shells/bash: 4.2_p20
dev-java/java-config: 2.1.11-r3
dev-lang/python: 2.7.3-r2, 3.1.4-r3, 3.2.3
dev-util/ccache: 3.1.7
dev-util/cmake: 2.8.7-r5
dev-util/pkgconfig: 0.26
sys-apps/baselayout: 2.1-r1
sys-apps/openrc: 0.9.8.4
sys-apps/sandbox: 2.5
sys-devel/autoconf: 2.68
sys-devel/automake: 1.11.1
sys-devel/binutils: 2.21.1-r1
sys-devel/gcc: 4.5.3-r2
sys-devel/gcc-config: 1.6
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc: 2.14.1-r3
Repositories: gentoo x-portage
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i486-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe -fomit-frame-pointer"
CHOST="i486-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/openvpn/easy-rsa"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-
release /etc/php/apache2-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/cli-php5.3/ext-active/ /etc/revdep-
rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe -fomit-frame-pointer"
DISTDIR="/var/distfiles"
FCFLAGS="-march=i686 -O2 -pipe"
FEATURES="assume-digests binpkg-logs ccache config-protect-if-modified distlocks ebuild-locks fixlafiles news parallel-f
etch parse-eapi-ebuild-head protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans user
fetch"
FFLAGS="-march=i686 -O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="de"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --
human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/var/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
...
|
Vielleicht ist es ja ein total dummer denkfehler meinerseits 
Danke im Vorraus
Treb
_________________
System : Intel Core2 Quad Q6600
Last edited by Treborius on Mon Aug 13, 2012 6:03 am; edited 1 time in total |
|
Deutsches Forum (German)
