Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
3ware Raid0 /dev/sda fehlt nach Neuinstallation
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3009
Location: Berlin

PostPosted: Sat Aug 04, 2012 9:36 am    Post subject: 3ware Raid0 /dev/sda fehlt nach Neuinstallation Reply with quote

Systemstart funktioniert:
cat /boot/grub/grub.conf
Code:
title Gentoo Linux root=/dev/sda5
root (hd0,4)
kernel /boot/bzImage root=/dev/sda5

Allerdings fehlt danach /dev/sda5
Die SATA Geräte sind da.
Code:
olaf@flammenflitzer ~ $ ls /dev/sd*
/dev/sdb   /dev/sdc1  /dev/sde   /dev/sdf1  /dev/sdg2
/dev/sdb1  /dev/sdd   /dev/sde1  /dev/sdg   /dev/sdg3
/dev/sdc   /dev/sdd1  /dev/sdf   /dev/sdg1  /dev/sdg5

Code:
dmesg | grep 3ware
3ware Storage Controller device driver for Linux v1.26.02.003.
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x7c00, IRQ: 16.
scsi 0:0:0:0: Direct-Access     3ware    Logical Disk 0   1.2  PQ: 0 ANSI: 0

Code:
dmesg | grep SCSI
SCSI subsystem initialized
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 5:0:0:0: [sde] Attached SCSI disk
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 6:0:0:0: [sdf] Attached SCSI disk
sd 7:0:0:0: [sdg] Attached SCSI disk

Code:
uname -r
3.4.0-gentoo
lspci .....
Code:
04:01.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01)
06:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
07:00.0 Mass storage controller: Silicon Image, Inc. SiI 3531 [SATALink/SATARaid] Serial ATA Controller (rev 01)

Code:
flammenflitzer olaf # cat /usr/src/linux/.config | grep SCSI
# CONFIG_CISS_SCSI_TAPE is not set
# SCSI device support
CONFIG_SCSI_MOD=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
# SCSI support type (disk, tape, CD-ROM)
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
# SCSI Transports
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_TCM_PSCSI is not set
# CONFIG_ISCSI_TARGET is not set
CONFIG_I2O_SCSI=m
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
# CONFIG_ISCSI_IBFT_FIND is not set
flammenflitzer olaf #
Back to top
View user's profile Send private message
yuhu
Tux's lil' helper
Tux's lil' helper


Joined: 17 Oct 2006
Posts: 82

PostPosted: Sat Aug 04, 2012 7:15 pm    Post subject: Reply with quote

ist sdg5 nicht das gesuchte sda5 ?

du könntest in grub die uuid von sda(g)5 eintragen oder sicherstellen, dass als erstes die devices für den 3ware controller erstellt werden.
Back to top
View user's profile Send private message
firefly
Advocate
Advocate


Joined: 31 Oct 2002
Posts: 4116

PostPosted: Sat Aug 04, 2012 10:14 pm    Post subject: Reply with quote

yuhu wrote:
idu könntest in grub die uuid von sda(g)5 eintragen oder sicherstellen, dass als erstes die devices für den 3ware controller erstellt werden.

Wenn du "root=UUID=" meinst, dann klappt das nicht "out of the box" denn der Kernel versteht keine Filesystem UUID sondern nur die UUID von partitionen und diese gibt es nur mit einer GPT partitionstabelle
Und statt UUID= heißt es dann "root=PARTUUID="
_________________
Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn.
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3009
Location: Berlin

PostPosted: Sun Aug 05, 2012 5:45 am    Post subject: Reply with quote

/dev/sdg5 ist nicht das gesuchte
Code:
flammenflitzer olaf # dmesg | grep 3ware
3ware Storage Controller device driver for Linux v1.26.02.003.
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x7c00, IRQ: 16.
scsi 0:0:0:0: Direct-Access     3ware    Logical Disk 0   1.2  PQ: 0 ANSI: 0
Code:

flammenflitzer olaf # dmesg | grep scsi
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x7c00, IRQ: 16.
scsi 0:0:0:0: Direct-Access     3ware    Logical Disk 0   1.2  PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi1 : pata_amd
scsi2 : pata_amd
scsi3 : sata_nv
scsi4 : sata_nv
scsi5 : sata_nv
scsi6 : sata_nv
scsi7 : sata_nv
scsi8 : sata_nv
scsi9 : sata_sil24
scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-3500AG 2.E9 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:0: Direct-Access     ATA      ST31000528AS     CC34 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg4 type 0
scsi 6:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg5 type 0
scsi 7:0:0:0: Direct-Access     ATA      WDC WD20EARS-00S 80.0 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg6 type 0
scsi 8:0:0:0: Direct-Access     ATA      SAMSUNG HD401LJ  ZZ10 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg7 type 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr0
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3009
Location: Berlin

PostPosted: Sun Aug 05, 2012 6:33 pm    Post subject: Reply with quote

sollte device-mapper in das default runlevel?
Code:
flammenflitzer olaf # eselect rc list
Available init scripts
  acpid                     default
  alsasound                 boot
  avahi-daemon             
  avahi-dnsconfd           
  bootmisc                  boot
  calibre-server           
  consolefont               
  consolekit                default
  cpufrequtils              default
  crypto-loop               
  cupsd                     default
  dbus                      default
  devfs                     sysinit
  device-mapper             
  dhcpcd                   
  dmesg                     sysinit
  dmeventd                 
  fancontrol               
  fsck                      boot
  fuse                     
  gpm                       
  hddtemp                   
  hostname                  boot
  hwclock                   boot
  irexec                   
  keymaps                   boot
  killprocs                 shutdown
  lircd                     
  lircmd                   
  lm_sensors               
  local                     default
  localmount                boot
  lvm                       
  lvm-monitoring           
  mdadm                     
  mdraid                   
  modules                   boot
  mount-ro                  shutdown
  mtab                      boot
  mysql                     default
  net.eth0                  default
  net.lo                    boot
  netmount                  default
  network                   
  nscd                     
  numlock                   
  pciparm                   
  procfs                    boot
  pwcheck                   
  pydoc-2.7                 
  pydoc-3.2                 
  rdate                     
  root                      boot
  rsyncd                   
  saslauthd                 
  savecache                 shutdown
  sshd                     
  staticroute               
  swap                      boot
  swclock                   
  sysctl                    boot
  sysfs                     
  syslog-ng                 default
  termencoding              boot
  udev                      sysinit
  udev-mount               
  udev-postmount            default
  urandom                   boot
  xdm                       default
  xdm-setup       
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum