Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] Xorg 3d acceleration in Powerbook G4 RV100 radeon
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Tue Jul 31, 2012 9:21 pm    Post subject: [Solved] Xorg 3d acceleration in Powerbook G4 RV100 radeon Reply with quote

Hi! Before I start, i know what many can say: what the heck you want to enable 3d acceleration for in such an oldie.. Well.. lets say that if i choose Gentoo, it was because my curiosity in putting things to work. :). And, in previous versions of Xorg etc, acceleration worked like a charm. It is with the new way of configuring 3D acceleration inside the kernel, that this radeon (Advanced Micro Devices [AMD] nee ATI RV100 LY [Mobility Radeon 7000] stoped working properly. Now, if i hear somebody with a real knowledge about this, telling me: forget it, there is NO WAY to make this card work with new KMS/DRI, I`ll just top trying. But as far as I`ve googled and read, nobody say it can`t be put to work. Sorry for my english, not english-speaker. Following Gentoo guide for 3d acceleration, doesn`t work for this card. If I disable every framebuffer driver, as directed by the guide (this is to give access to fbcon to take control of framebuffering), i cant even boot the kernel, just got a few lines, then it freezes, and then, after a while, a nice purple colored aurora australis :). If i load radeon framebuffer, kernell boots ok, but Xorg complains about KMS modesetting not supported, and after playing and playing around with kernel options, emerging packages with different USES, (believe me, I have tried almost everything, thats why im not posting any logs, info, etc), etc. What do I want with this post? Well, to start a thread, with colaboration from experts, to start from scratch trying to make this card work. Perhaps there is a kernel config wich should be compiled as module, instead "in kernel", perhaps some option that should/shouldnt be enabled.. I dont know.. So, to start, I would like to hear opinions, experiences, and start working on it to succesfully make this card work as it used to work, or at list, as it should with today software. Thank you very much, I`m waiting for your opinions!! :)

Last edited by neopablo2000 on Sun Aug 19, 2012 1:50 am; edited 1 time in total
Back to top
View user's profile Send private message
ali3nx
Guru
Guru


Joined: 21 Sep 2003
Posts: 476
Location: Winnipeg, Canada

PostPosted: Tue Jul 31, 2012 9:51 pm    Post subject: Reply with quote

IMO wall of text is hard to read.

Maybe you could add some paragraph spaces for folks that have mild blindness from reading code for too many years ;)

Also

neopablo2000 wrote:
im not posting any logs, info, etc


Those are often a valuable way for anyone able to help to try and make sence of the problem. I have a genuine curiosity about diagnostics but blind diagnosing problems is often extremely difficult to nearly impossible.
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Wed Aug 01, 2012 1:43 pm    Post subject: Reply with quote

Thank you Ali3nx! Ok, here are some basic info, to get started:

lspci:

Code:
0000:00:0b.0 Host bridge: Apple Inc. UniNorth 1.5 AGP
0000:00:10.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV100 LY [Mobility Radeon 7000]

0001:10:0b.0 Host bridge: Apple Inc. UniNorth 1.5 PCI

0001:10:17.0 Unassigned class [ff00]: Apple Inc. KeyLargo Mac I/O (rev 03)

0001:10:18.0 USB controller: Apple Inc. KeyLargo USB

0001:10:19.0 USB controller: Apple Inc. KeyLargo USB

0001:10:1a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)

0002:24:0b.0 Host bridge: Apple Inc. UniNorth 1.5 Internal PCI

0002:24:0e.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev ff)
0002:24:0f.0 Ethernet controller: Apple Inc. UniNorth GMAC (Sun GEM) (rev 01)


dmseg:

Code:
pci 0002:24:0b.0: [106b:002f] type 00 class 0x060000

pci 0002:24:0e.0: [11c1:5811] type 00 class 0x0c0010

pci 0002:24:0e.0: reg 10: [mem 0xf5000000-0xf5000fff]

pci 0002:24:0e.0: supports D1 D2

pci 0002:24:0e.0: PME# supported from D0 D1 D2 D3hot

pci 0002:24:0f.0: [106b:0021] type 00 class 0x020000

pci 0002:24:0f.0: reg 10: [mem 0xf5200000-0xf53fffff]

pci 0002:24:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]

PCI 0000:00 Cannot reserve Legacy IO [io  0x802000-0x802fff]

pci 0001:10:1a.0: res[9]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000

pci 0001:10:1a.0: res[10]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000

pci 0001:10:1a.0: res[7]=[io  0x0100-0x00ff] get_res_add_size add_size 100

pci 0001:10:1a.0: res[8]=[io  0x0100-0x00ff] get_res_add_size add_size 100

pci 0001:10:1a.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]

pci 0001:10:1a.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]

pci 0001:10:1a.0: BAR 7: assigned [io  0x1000-0x10ff]

pci 0001:10:1a.0: BAR 8: assigned [io  0x1100-0x11ff]

pci 0001:10:1a.0: CardBus bridge to [bus 11-14]

pci 0001:10:1a.0:   bridge window [io  0x1000-0x10ff]

pci 0001:10:1a.0:   bridge window [io  0x1100-0x11ff]

pci 0001:10:1a.0:   bridge window [mem 0x84000000-0x87ffffff pref]

pci 0001:10:1a.0:   bridge window [mem 0x88000000-0x8bffffff]

pci_bus 0000:00: resource 4 [io  0x802000-0x1001fff]

pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]

pci_bus 0000:00: resource 6 [mem 0xb0000000-0xbfffffff]

pci_bus 0001:10: resource 4 [io  0x0000-0x7fffff]

pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]

pci_bus 0001:10: resource 6 [mem 0x80000000-0xafffffff]

pci_bus 0001:11: resource 0 [io  0x1000-0x10ff]

pci_bus 0001:11: resource 1 [io  0x1100-0x11ff]

pci_bus 0001:11: resource 2 [mem 0x84000000-0x87ffffff pref]

pci_bus 0001:11: resource 3 [mem 0x88000000-0x8bffffff]

pci_bus 0002:24: resource 4 [io  0xff7fe000-0xffffdfff]

pci_bus 0002:24: resource 5 [mem 0xf5000000-0xf5ffffff]

bio: create slab <bio-0> at 0

vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none

vgaarb: loaded

vgaarb: bridge control possible 0000:00:10.0

SCSI subsystem initialized
libata version 3.00 loaded.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Switching to clocksource timebase

NET: Registered protocol family 2

IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 16384 bind 16384)

TCP: reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport
pci 0001:10:18.0: enabling device (0000 -> 0002)

pci 0001:10:19.0: enabling device (0000 -> 0002)

PCI: CLS mismatch (32 != 1020), using 32 bytes

Registering PowerMac CPU frequency driver

Low: 500 Mhz, High: 550 Mhz, Boot: 550 Mhz

NFS: Registering the id_resolver key type

Key type id_resolver registered

NTFS driver 2.1.30 [Flags: R/W].

msgmni has been set to 1000

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

Generic RTC Driver v1.07

Generic non-volatile memory driver v1.1

brd: module loaded

loop: module loaded

MacIO PCI driver attached to Keylargo chipset

adb: starting probe task...

mesh: configured for synchronous 5 MB/s

st: Version 20101219, fixed bufsize 32768, s/g segs 256

adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f

ADB keyboard at 2, handler 1

Detected ADB keyboard, type ISO, swapping keys.

input: ADB keyboard as /devices/virtual/input/input0

input: ADB Powerbook buttons as /devices/virtual/input/input1

ADB mouse at 3, handler set to 4 (trackpad)

input: ADB mouse as /devices/virtual/input/input2

adb: finished probe task...

pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2

scsi0 : pata_macio

ata1: PATA max UDMA/66 irq 19

ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A2, max UDMA/100

ata1.00: 117210240 sectors, multi 16: LBA

ata1.00: configured for UDMA/66

scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5

sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)

sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sd 0:0:0:0: Attached scsi generic sg0 type 0
 
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6

sd 0:0:0:0: [sda] Attached SCSI disk

pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0

scsi1 : pata_macio

ata2: PATA max MWDMA2 irq 20

ata2.00: ATAPI: MATSHITADVD-ROM SR-8187, HA18, max UDMA/33

ata2.00: configured for MWDMA2

scsi 1:0:0:0: CD-ROM            MATSHITA DVD-ROM SR-8187  HA18 PQ: 0 ANSI: 5

sr0: scsi3-mmc drive: 46x/46x cd/rw xa/form2 cdda tray

cdrom: Uniform CD-ROM driver Revision: 3.20

sr 1:0:0:0: Attached scsi CD-ROM sr0

sr 1:0:0:0: Attached scsi generic sg1 type 5

pata-macio 0.00021000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 1

scsi2 : pata_macio

ata3: PATA max MWDMA2 irq 21

sungem.c:v1.0 David S. Miller <davem@redhat.com>

gem 0002:24:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:45:3d:4c

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

ohci_hcd 0001:10:18.0: OHCI Host Controller

ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1

ohci_hcd 0001:10:18.0: irq 27, io mem 0xa0002000

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

ohci_hcd 0001:10:19.0: OHCI Host Controller

ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2

ohci_hcd 0001:10:19.0: irq 28, io mem 0xa0001000

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

mousedev: PS/2 mouse device common for all mice

usbcore: registered new interface driver appletouch

PowerMac i2c bus pmu 2 registered

i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/rtc

i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/adb

i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt

PowerMac i2c bus pmu 1 registered

i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/rtc

i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/adb

i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt

PowerMac i2c bus mac-io 0 registered

i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/cereal

i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/deq

i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/i2c-modem

PowerMac i2c bus uni-n 1 registered

i2c i2c-3: i2c-powermac: invalid reg on /uni-n@f8000000/i2c@f8001000/cereal

PowerMac i2c bus uni-n 0 registered

i2c i2c-4: i2c-powermac: invalid reg on /uni-n@f8000000/i2c@f8001000/cereal

APM Battery Driver

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

oprofile: using ppc/7450 performance monitoring.

TCP: cubic registered

Initializing XFRM netlink socket

NET: Registered protocol family 17

NET: Registered protocol family 15

Key type dns_resolver registered

PM: Hibernation image not present or could not be loaded.

input: PMU as /devices/virtual/input/input3

Registered led device: pmu-led::front

kjournald starting.  Commit interval 5 seconds

EXT3-fs (sda5): mounted filesystem with writeback data mode

VFS: Mounted root (ext3 filesystem) readonly on device 8:5.

Freeing unused kernel memory: 212k freed

usb 1-1: new full-speed USB device number 2 using ohci_hcd

systemd-udevd[1179]: starting version 186

pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)

0.00013020:ch-a: ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port

'Low Performance USB Block' driver is deprecated. Please switch to usb-storage

0.00013000:ch-b: ttyS1 at MMIO 0x80013000 (irq = 29) is a Z85c30 ESCC - Infrared port

Linux agpgart interface v0.103

agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset

agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64

agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0

radeonfb 0000:00:10.0: enabling device (0086 -> 0087)

radeonfb 0000:00:10.0: Invalid ROM contents

radeonfb (0000:00:10.0): Invalid ROM signature 8080 should be 0xaa55

radeonfb: Retrieved PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=166.00 Mhz, System=166.00 MHz

radeonfb: PLL min 12000 max 35000

i2c i2c-7: unable to read EDID block.

i2c i2c-7: unable to read EDID block.
 
uba: uba1

usbcore: registered new interface driver ub

i2c i2c-7: unable to read EDID block.

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

i2c i2c-8: unable to read EDID block.

i2c i2c-8: unable to read EDID block.

i2c i2c-8: unable to read EDID block.

radeonfb: Monitor 1 type LCD found

radeonfb: EDID probed

radeonfb: Monitor 2 type no found

radeonfb: Using Firmware dividers 0x0001003a from PPLL 0

radeonfb: Dynamic Clock Power Management enabled

radeonfb (0000:00:10.0): ATI Radeon 4c59 "LY"

[drm] Initialized drm 1.1.0 20060810

[drm] radeon defaulting to kernel modesetting.

[drm] radeon kernel modesetting enabled.

Console: switching to colour frame buffer device 144x48
EXT3-fs (sda5): using internal journal

Adding 1048572k swap on /dev/sda4.  Priority:-1 extents:1 across:1048572k


Emerge --info:

Code:
Portage 2.1.11.9 (default/linux/powerpc/ppc32/10.0, gcc-4.5.3, unavailable, 3.5.0-gentoo ppc)

=================================================================


System uname: Linux-3.5.0-gentoo-ppc-7450,_altivec_supported-with-gentoo-2.1

Timestamp of tree: Sat, 28 Jul 2012 00:45:01 +0000

app-shells/bash:          4.2_p37

dev-lang/python:          2.7.3-r2, 3.2.3-r1

dev-util/cmake:           2.8.8-r3

dev-util/pkgconfig:       0.27

sys-apps/baselayout:      2.1-r1

sys-apps/openrc:          0.10.5

sys-apps/sandbox:         2.6

sys-devel/autoconf:       2.13, 2.69

sys-devel/automake:       1.11.1, 1.12.2

sys-devel/binutils:       2.22.90

sys-devel/gcc:            4.5.3-r2, 4.6.3

sys-devel/gcc-config:     1.6

sys-devel/libtool:        2.4.2

sys-devel/make:           3.82-r1

sys-kernel/linux-headers: 3.5 (virtual/os-headers)

sys-libs/glibc:           2.14.1-r3

Repositories: gentoo


ACCEPT_KEYWORDS="ppc ~ppc"


ACCEPT_LICENSE="* -@EULA"


CBUILD="powerpc-unknown-linux-gnu"


CFLAGS="-O2 -mcpu=powerpc -mtune=powerpc -fno-strict-aliasing -pipe"


CHOST="powerpc-unknown-linux-gnu"


CONFIG_PROTECT="/etc"


CONFIG_PROTECT_MASK="${EPREFIX}/etc/gconf /etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"


CXXFLAGS="-O2 -mcpu=powerpc -mtune=powerpc -fno-strict-aliasing -pipe"


DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"


FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles news parallel-fetch parse-eapi-ebuild-head protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"


FFLAGS="-O2 -pipe"


GENTOO_MIRRORS="http://gentoo.localhost.net.ar/ ftp://mirrors.localhost.net.ar/pub/mirrors/gentoo/"


LANG="es_AR.UTF-8"


LDFLAGS="-Wl,-O1 -Wl,--as-needed"


MAKEOPTS="-j2"


PKGDIR="/usr/portage/packages"


PORTAGE_CONFIGROOT="/"


PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"


PORTAGE_TMPDIR="/var/tmp"


PORTDIR="/usr/portage"


PORTDIR_OVERLAY=""


SYNC="rsync://rsync.us.gentoo.org/gentoo-portage"


USE="X acl berkdb bzip2 cli cracklib crypt cups cxx dbus dri fortran gdbm gpm iconv ipv6 jpeg lock modules mudflap ncurses nls nptl openmp pam pcre ppc pppd readline session ssl startup-notification tcpd thunar udev unicode zlib"

ALSA_CARDS="aoa aoa-fabric-layout aoa-onyx aoa-soundbus aoa-soundbus-i2s aoa-tas aoa-toonie powermac usb-audio via82xx"

ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol"

APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias"

CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump"

CAMERAS="ptp2"

COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc"

GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx"

INPUT_DEVICES="evdev synaptics" KERNEL="linux"

LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text"

LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer"

PHP_TARGETS="php5-3" PYTHON_TARGETS="python3_2 python2_7"

RUBY_TARGETS="ruby18 ruby19"

USERLAND="GNU"

VIDEO_CARDS="radeon"

XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"


Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON


Xorg.0.log:

Code:
[   158.852]
This is a pre-release version of the X server from The X.Org Foundation.

It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.


[   158.859]
X.Org X Server 1.12.99.903 (1.13.0 RC 3)
Release Date: 2012-07-25

[   158.879] X Protocol Version 11, Revision 0

[   158.886] Build Operating System: Linux 3.5.0-gentoo ppc Gentoo

[   158.893] Current Operating System: Linux localhost 3.5.0-gentoo #5 Tue Jul 31 19:23:20 Local time zone must be set--see zic manu ppc

[   158.894] Kernel command line: ro root=/dev/sda5

[   158.908] Build Date: 31 July 2012  05:22:36AM

[   158.915] 

[   158.922] Current version of pixman: 0.26.2

[   158.936]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.

[   158.936] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[   158.966] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 31 20:22:48 2012

[   158.999] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[   159.000] (==) No Layout section.  Using the first Screen section.

[   159.000] (==) No screen section available. Using defaults.

[   159.001] (**) |-->Screen "Default Screen Section" (0)

[   159.001] (**) |   |-->Monitor "<default monitor>"

[   159.001] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.

[   159.002] (==) Automatically adding devices

[   159.002] (==) Automatically enabling devices

[   159.002] (==) Automatically adding GPU devices

[   159.002] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/TTF/,
   /usr/share/fonts/OTF/,
   /usr/share/fonts/Type1/,
   /usr/share/fonts/100dpi/,
   /usr/share/fonts/75dpi/

[   159.002] (==) ModulePath set to "/usr/lib/xorg/modules"

[   159.002] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.

[   159.002] (II) Loader magic: 0x1024c5f8

[   159.002] (II) Module ABI versions:

[   159.002]    X.Org ANSI C Emulation: 0.4

[   159.002]    X.Org Video Driver: 13.0

[   159.002]    X.Org XInput driver : 18.0

[   159.002]    X.Org Server Extension : 6.0

[   159.005] (--) PCI:*(0:0:16:0) 1002:4c59:1002:4c59 rev 0, Mem @ 0xb8000000/134217728, 0xb0000000/65536, I/O @ 0x00000400/256, BIOS @ 0x????????/131072

[   159.005] (II) Open APM successful

[   159.026] Initializing built-in extension Generic Event Extension

[   159.033] Initializing built-in extension SHAPE

[   159.040] Initializing built-in extension MIT-SHM

[   159.048] Initializing built-in extension XInputExtension

[   159.055] Initializing built-in extension XTEST

[   159.062] Initializing built-in extension BIG-REQUESTS

[   159.069] Initializing built-in extension SYNC

[   159.075] Initializing built-in extension XKEYBOARD

[   159.082] Initializing built-in extension XC-MISC
[   159.088] Initializing built-in extension XINERAMA

[   159.095] Initializing built-in extension XFIXES

[   159.101] Initializing built-in extension RENDER

[   159.107] Initializing built-in extension RANDR

[   159.114] Initializing built-in extension COMPOSITE

[   159.120] Initializing built-in extension DAMAGE

[   159.126] Initializing built-in extension MIT-SCREEN-SAVER

[   159.132] Initializing built-in extension DOUBLE-BUFFER

[   159.138] Initializing built-in extension RECORD

[   159.144] Initializing built-in extension DPMS

[   159.149] Initializing built-in extension X-Resource

[   159.155] Initializing built-in extension XVideo

[   159.161] Initializing built-in extension XVideo-MotionCompensation

[   159.167] Initializing built-in extension XFree86-VidModeExtension

[   159.172] Initializing built-in extension XFree86-DGA

[   159.178] Initializing built-in extension XFree86-DRI

[   159.183] Initializing built-in extension DRI2

[   159.183] (II) LoadModule: "glx"

[   159.184] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[   159.227] (II) Module glx: vendor="X.Org Foundation"

[   159.227]    compiled for 1.12.99.903, module version = 1.0.0

[   159.227]    ABI class: X.Org Server Extension, version 6.0

[   159.227] (==) AIGLX enabled

[   159.232] Loading extension GLX

[   159.232] (==) Matched ati as autoconfigured driver 0

[   159.233] (==) Matched modesetting as autoconfigured driver 1

[   159.233] (==) Matched fbdev as autoconfigured driver 2

[   159.233] (==) Assigned the driver to the xf86ConfigLayout

[   159.233] (II) LoadModule: "ati"
[   159.233] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so

[   159.234] (II) Module ati: vendor="X.Org Foundation"

[   159.234]    compiled for 1.12.99.903, module version = 6.14.6

[   159.234]    Module class: X.Org Video Driver

[   159.234]    ABI class: X.Org Video Driver, version 13.0

[   159.234] (II) LoadModule: "radeon"
[   159.235] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so

[   159.236] (II) Module radeon: vendor="X.Org Foundation"

[   159.236]    compiled for 1.12.99.903, module version = 6.14.6

[   159.236]    Module class: X.Org Video Driver

[   159.236]    ABI class: X.Org Video Driver, version 13.0

[   159.236] (II) LoadModule: "modesetting"

[   159.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[   159.237] (II) Module modesetting: vendor="X.Org Foundation"

[   159.237]    compiled for 1.12.99.903, module version = 0.4.0

[   159.237]    Module class: X.Org Video Driver
[   159.238]    ABI class: X.Org Video Driver, version 13.0

[   159.238] (II) LoadModule: "fbdev"

[   159.342] (WW) Warning, couldn't open module fbdev

[   159.342] (II) UnloadModule: "fbdev"

[   159.342] (II) Unloading fbdev

[   159.343] (EE) Failed to load module "fbdev" (module does not exist, 0)

[   159.343] (II) RADEON: Driver for ATI Radeon chipsets:
   ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
   ATI Radeon Mobility X300 (M24) 3152 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
   ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
   ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
   ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
   ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
   ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
   ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
   ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
   ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
   ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
   ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
   ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
   ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
   ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
   ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
   ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
   ATI Radeon Mobility X300 (M22) 5460 (PCIE),
   ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
   ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
   ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
   ATI FireGL unknown (R423) UR (PCIE),
   ATI FireGL unknown (R423) UT (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility Radeon X700 XL (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835,
   ATI Radeon XPRESS 200 5954 (PCIE),
   ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
   ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
   ATI Radeon XPRESS 200M 5975 (PCIE),
   ATI Radeon XPRESS 200 5A41 (PCIE),
   ATI Radeon XPRESS 200M 5A42 (PCIE),
   ATI Radeon XPRESS 200 5A61 (PCIE),
   ATI Radeon XPRESS 200M 5A62 (PCIE),
   ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI Radeon X550 (RV370) 5B63 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
   ATI Mobility Radeon X800 XT (M28) (PCIE),
   ATI Mobility FireGL V5100 (M28) (PCIE),
   ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
   ATI Radeon X850 XT PE (R480) (PCIE),
   ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
   ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
   ATI Radeon X850 XT (R480) (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE),
   ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
   ATI Radeon X700 PRO (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
   ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
   ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
   ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
   ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
   ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
   ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
   ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
   ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
   ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
   ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
   ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
   ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
   ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
   ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
   ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
   ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
   ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
   ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
   ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
   ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
   ATI Mobility Radeon X1700, ATI Radeon X2300HD,
   ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
   ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
   ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
   ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
   ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
   ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
   ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
   ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
   ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
   ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
   ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
   ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
   ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
   ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
   ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
   ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
   AMD FireStream 9250, ATI FirePro V8700 (FireGL),
   ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
   ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
   ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
   ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
   ATI Mobility Radeon HD 4670, ATI FirePro M5750,
   ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
   ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
   ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
   ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
   ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
   ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
   ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
   ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
   ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
   ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
   ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
   ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
   ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
   ATI Mobility Radeon HD 3850 X2, ATI RV670,
   ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
   ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
   ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
   ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
   ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
   ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
   ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
   ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
   ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
   ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
   ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
   ATI FireGL V3600, ATI Radeon HD 2600 LE,
   ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
   ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
   ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
   ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
   ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
   ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
   ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
   ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
   ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
   ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
   SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
   ATI Radeon 4100, ATI Mobility Radeon HD 4200,
   ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
   AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
   AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
   AMD Radeon HD 6300 Series Graphics,
   AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
   AMD Firestream 9350, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
   ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
   ATI Mobility Radeon HD 5800 Series,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Mobility Radeon HD 5000 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
   ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
   ATI Mobility Radeon HD 5000 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
   ATI Mobility Radeon Graphics, CEDAR,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
   ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
   CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
   AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
   CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
   BARTS, BARTS, Mobility Radeon HD 6000 Series,
   Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
   AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
   AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
   CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA


[   159.359] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[   159.359] (--) using VT number 7

[   159.449] (II) [KMS] drm report modesetting isn't supported.

[   159.449] (WW) Falling back to old probe method for modesetting

[   159.450] (EE) open /dev/dri/card0: No such file or directory

[   159.450] (II) RADEON(0): TOTO SAYS 00000000b0000000

[   159.450] (II) RADEON(0): MMIO registers at 0x00000000b0000000: size 64KB

[   159.450] (II) RADEON(0): PCI bus 0 card 16 func 0

[   159.450] (II) RADEON(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32

[   159.450] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32

[   159.450] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

[   159.451] (==) RADEON(0): Default visual is TrueColor

[   159.451] (II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped

[   159.451] (==) RADEON(0): RGB weight 888

[   159.451] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)

[   159.451] (--) RADEON(0): Chipset: "ATI Radeon Mobility M6 LY (AGP)" (ChipID = 0x4c59)

[   159.451] (--) RADEON(0): Linear framebuffer at 0x00000000b8000000

[   159.451] (II) RADEON(0): AGP card detected

[   159.452] (WW) RADEON(0): Failed to read PCI ROM!

[   159.452] (II) RADEON(0): Attempting to read un-POSTed bios

[   159.452] (WW) RADEON(0): Failed to read PCI ROM!

[   159.452] (WW) RADEON(0): Unrecognized BIOS signature, BIOS data will not be used

[   159.552] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.

[   159.552] (II) RADEON(0): Detected total video RAM=16384K, accessible=65536K (PCI BAR=131072K)

[   159.552] (--) RADEON(0): Mapped VideoRAM: 16384 kByte (64 bit DDR SDRAM)

[   159.553] (II) RADEON(0): Color tiling enabled by default
[   159.553] (II) Loading sub module "ddc"

[   159.553] (II) LoadModule: "ddc"
[   159.553] (II) Module "ddc" already built-in

[   159.553] (II) Loading sub module "i2c"
[   159.553] (II) LoadModule: "i2c"

[   159.553] (II) Module "i2c" already built-in
[   159.555] (WW) RADEON(0): Video BIOS not detected, using default clock settings!

[   159.676] (II) RADEON(0): Probed PLL values: xtal: 27.000000 Mhz, sclk: 166.153839 Mhz, mclk: 166.153839 Mhz

[   159.676] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=33231

[   159.677] (==) RADEON(0): Detected PowerBook with VGA.

[   159.677] (II) RADEON(0): If this is not correct, try Option "MacModel" and consider reporting to the

[   159.677] (II) RADEON(0): xorg-driver-ati@lists.x.org mailing list with the contents of /proc/cpuinfo.

[   159.682] (II) RADEON(0): Existing panel PLL dividers will be used.

[   159.682] (WW) RADEON(0): Panel size 1152x768 is derived, this may not be correct.
If not, use PanelSize option to overwrite this setting

[   159.682] (II) RADEON(0): Output LVDS has no monitor section

[   159.683] (II) RADEON(0): I2C bus "LVDS" initialized.
[   159.683] (II) RADEON(0): Output VGA-0 has no monitor section

[   159.683] (II) RADEON(0): I2C bus "VGA-0" initialized.

[   159.683] (II) RADEON(0): Output S-video has no monitor section

[   159.683] (II) RADEON(0): Port0:

[   159.683]   XRANDR name: LVDS

[   159.683]   Connector: LVDS

[   159.683]   LCD1: INTERNAL_LVDS

[   159.683]   DDC reg: 0x64

[   159.683] (II) RADEON(0): Port1:

[   159.683]   XRANDR name: VGA-0

[   159.683]   Connector: VGA

[   159.683]   CRT1: INTERNAL_DAC1

[   159.683]   DDC reg: 0x60

[   159.683] (II) RADEON(0): Port2:

[   159.683]   XRANDR name: S-video

[   159.684]   Connector: S-video

[   159.684]   TV1: INTERNAL_DAC2

[   159.684]   DDC reg: 0x0

[   159.684] (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.

[   159.687] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2

[   159.687] finished output detect: 0

[   159.687] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.

[   159.708] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0

[   159.708] finished output detect: 1

[   159.708] (II) RADEON(0): Output: S-video, Detected Monitor Type: 0

[   159.708] finished output detect: 2

[   159.708] finished all detect

[   159.712] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2

[   159.712] (II) RADEON(0): Added native panel mode using CVT: 1152x768

[   159.712] (II) RADEON(0): Printing probed modes for output LVDS

[   159.712] (II) RADEON(0): Modeline "1152x768"x59.8   62.00  1152 1200 1232 1312  768 771 781 790 +hsync -vsync (47.3 kHz eP)

[   159.712] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz e)

[   159.712] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz e)

[   159.712] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz e)

[   159.733] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[   159.733] (II) RADEON(0): EDID for output VGA-0

[   159.733] (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
[   159.733] (II) RADEON(0): EDID for output S-video

[   159.733] (II) RADEON(0): Output LVDS connected
[   159.733] (II) RADEON(0): Output VGA-0 disconnected

[   159.733] (II) RADEON(0): Output S-video disconnected
[   159.733] (II) RADEON(0): Using exact sizes for initial modes

[   159.733] (II) RADEON(0): Output LVDS using initial mode 1152x768
[   159.734] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

[   159.734] (==) RADEON(0): DPI set to (96, 96)
[   159.734] (II) Loading sub module "fb"
[   159.734] (II) LoadModule: "fb"

[   159.735] (II) Loading /usr/lib/xorg/modules/libfb.so

[   159.764] (II) Module fb: vendor="X.Org Foundation"

[   159.764]    compiled for 1.12.99.903, module version = 1.0.0

[   159.765]    ABI class: X.Org ANSI C Emulation, version 0.4

[   159.765] (II) Loading sub module "ramdac"

[   159.765] (II) LoadModule: "ramdac"

[   159.765] (II) Module "ramdac" already built-in

[   159.765] (==) RADEON(0): Using EXA acceleration architecture

[   159.765] (II) Loading sub module "exa"

[   159.765] (II) LoadModule: "exa"

[   159.765] (II) Loading /usr/lib/xorg/modules/libexa.so

[   159.783] (II) Module exa: vendor="X.Org Foundation"

[   159.783]    compiled for 1.12.99.903, module version = 2.6.0

[   159.783]    ABI class: X.Org Video Driver, version 13.0

[   159.783] (==) RADEON(0): Assuming overlay scaler buffer width is 1536

[   159.783] (II) RADEON(0): Cannot access BIOS or it is not valid.
      If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort,
      RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.

[   159.783] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support

[   159.783] (II) UnloadModule: "modesetting"

[   159.783] (II) Unloading modesetting

[   159.784] (--) Depth 24 pixmap format is 32 bpp

[   159.784] (II) RADEON(0): RADEONScreenInit b8000000 0 0

[   159.825] Entering TV Save

[   159.835] Save TV timing tables

[   159.835] saveTimingTables: reading timing tables

[   159.836] TV Save done
[   160.056] (II) RADEON(0): Dynamic Power Management Disabled

[   160.067] (II) RADEON(0): RADEONInitMemoryMap() :

[   160.067] (II) RADEON(0):   mem_size         : 0x04000000

[   160.067] (II) RADEON(0):   MC_FB_LOCATION   : 0xbbffb800

[   160.067] (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0

[   160.067] (II) RADEON(0): Depth moves disabled by default

[   160.069] (II) RADEON(0): Allocating from a screen of 16384 kb

[   160.069] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00510000

[   160.069] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00514000

[   160.069] (II) RADEON(0): Will use 5184 kb for front buffer at offset 0x00000000

[   160.069] (II) RADEON(0): Will use 11168 kb for X Server offscreen at offset 0x00518000

[   160.096] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[   160.096] (II) RADEON(0):   MC_FB_LOCATION   : 0xbbffb800 0x7fff0000

[   160.096] (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0

[   160.307] (==) RADEON(0): Backing store disabled

[   160.307] (WW) RADEON(0): Direct rendering disabled

[   160.307] (II) RADEON(0): Render acceleration enabled for R100 type cards.

[   160.307] (II) RADEON(0): Setting EXA maxPitchBytes

[   160.317] (II) EXA(0): Offscreen pixmap area of 11436032 bytes

[   160.317] (II) EXA(0): Driver registered support for the following operations:

[   160.317] (II)         Solid

[   160.317] (II)         Copy

[   160.317] (II)         Composite (RENDER acceleration)

[   160.317] (II) RADEON(0): Acceleration enabled

[   160.317] (==) RADEON(0): DPMS enabled

[   160.318] (==) RADEON(0): Silken mouse enabled

[   160.329] (II) RADEON(0): Detected Radeon Mobility M6, disabling multimedia i2c

[   160.329] (II) Loading sub module "theatre_detect"

[   160.329] (II) LoadModule: "theatre_detect"

[   160.330] (II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so

[   160.350] (II) Module theatre_detect: vendor="X.Org Foundation"

[   160.350]    compiled for 1.12.99.903, module version = 1.0.0

[   160.350]    ABI class: X.Org Video Driver, version 13.0

[   160.350] (II) RADEON(0): no multimedia table present, disabling Rage Theatre.

[   160.350] (II) RADEON(0): Set up overlay video

[   160.351] (II) RADEON(0): Set up textured video

[   160.351] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.

[   160.351] (II) RADEON(0): [XvMC] Extension initialized.

[   160.687] disable primary dac

[   160.688] disable TV

[   160.932] init memmap

[   160.932] init common

[   160.932] init crtc1

[   160.932] init pll1

[   160.932] restore memmap

[   160.932] (II) RADEON(0): RADEONRestoreMemMapRegisters() :

[   160.932] (II) RADEON(0):   MC_FB_LOCATION   : 0xbbffb800 0xbbffb800

[   160.932] (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0

[   161.032] restore common
[   161.132] restore crtc1

[   161.132] restore pll1

[   161.143] set RMX

[   161.143] set LVDS

[   161.143] enable LVDS

[   161.343] disable primary dac

[   161.343] disable TV

[   161.344] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[   161.346] (--) RandR disabled

[   161.413] (II) AIGLX: Screen 0 is not DRI2 capable

[   161.413] (II) AIGLX: Screen 0 is not DRI capable

[   161.720] (II) AIGLX: Loaded and initialized swrast

[   161.720] (II) GLX: Initialized DRISWRAST GL provider for screen 0

[   161.723] (II) RADEON(0): Setting screen physical size to 304 x 203

[   163.433] (II) config/udev: Adding input device PowerMac Beep (/dev/input/event3)

[   163.436] (II) No input driver specified, ignoring this device.

[   163.436] (II) This device may have been added with another device file.

[   163.438] (II) config/udev: Adding input device ADB keyboard (/dev/input/event0)

[   163.438] (**) ADB keyboard: Applying InputClass "evdev keyboard catchall"

[   163.438] (II) LoadModule: "evdev"

[   163.439] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[   163.519] (II) Module evdev: vendor="X.Org Foundation"

[   163.519]    compiled for 1.12.99.902, module version = 2.7.1

[   163.519]    Module class: X.Org XInput Driver

[   163.519]    ABI class: X.Org XInput driver, version 18.0

[   163.519] (II) Using input driver 'evdev' for 'ADB keyboard'

[   163.519] (**) ADB keyboard: always reports core events

[   163.519] (**) evdev: ADB keyboard: Device: "/dev/input/event0"

[   163.520] (--) evdev: ADB keyboard: Vendor 0x1 Product 0x22c4

[   163.520] (--) evdev: ADB keyboard: Found keys

[   163.520] (II) evdev: ADB keyboard: Configuring as keyboard

[   163.520] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"

[   163.520] (II) XINPUT: Adding extended input device "ADB keyboard" (type: KEYBOARD, id 6)

[   163.520] (**) Option "xkb_rules" "evdev"

[   163.520] (**) Option "xkb_model" "evdev"

[   163.520] (**) Option "xkb_layout" "us"

[   163.697] (II) config/udev: Adding input device ADB Powerbook buttons (/dev/input/event1)

[   163.697] (**) ADB Powerbook buttons: Applying InputClass "evdev keyboard catchall"

[   163.697] (II) Using input driver 'evdev' for 'ADB Powerbook buttons'

[   163.698] (**) ADB Powerbook buttons: always reports core events

[   163.698] (**) evdev: ADB Powerbook buttons: Device: "/dev/input/event1"

[   163.698] (--) evdev: ADB Powerbook buttons: Vendor 0x1 Product 0x771f

[   163.698] (--) evdev: ADB Powerbook buttons: Found keys

[   163.698] (II) evdev: ADB Powerbook buttons: Configuring as keyboard

[   163.698] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"

[   163.698] (II) XINPUT: Adding extended input device "ADB Powerbook buttons" (type: KEYBOARD, id 7)

[   163.698] (**) Option "xkb_rules" "evdev"

[   163.698] (**) Option "xkb_model" "evdev"

[   163.698] (**) Option "xkb_layout" "us"

[   163.702] (II) config/udev: Adding input device ADB mouse (/dev/input/event2)

[   163.702] (**) ADB mouse: Applying InputClass "evdev pointer catchall"

[   163.702] (II) Using input driver 'evdev' for 'ADB mouse'

[   163.702] (**) ADB mouse: always reports core events

[   163.702] (**) evdev: ADB mouse: Device: "/dev/input/event2"

[   163.703] (--) evdev: ADB mouse: Vendor 0x1 Product 0x3301

[   163.703] (--) evdev: ADB mouse: Found 3 mouse buttons

[   163.703] (--) evdev: ADB mouse: Found relative axes

[   163.703] (--) evdev: ADB mouse: Found x and y relative axes

[   163.703] (II) evdev: ADB mouse: Configuring as mouse

[   163.703] (**) evdev: ADB mouse: YAxisMapping: buttons 4 and 5

[   163.703] (**) evdev: ADB mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[   163.703] (**) Option "config_info" "udev:/sys/devices/virtual/input/input2/event2"

[   163.703] (II) XINPUT: Adding extended input device "ADB mouse" (type: MOUSE, id 8)

[   163.704] (II) evdev: ADB mouse: initialized for relative axes.

[   163.705] (**) ADB mouse: (accel) keeping acceleration scheme 1

[   163.705] (**) ADB mouse: (accel) acceleration profile 0

[   163.705] (**) ADB mouse: (accel) acceleration factor: 2.000

[   163.705] (**) ADB mouse: (accel) acceleration threshold: 4

[   163.707] (II) config/udev: Adding input device ADB mouse (/dev/input/mouse0)

[   163.707] (II) No input driver specified, ignoring this device.

[   163.707] (II) This device may have been added with another device file.

[   163.708] (II) config/udev: Adding input device PMU (/dev/input/event4)

[   163.708] (**) PMU: Applying InputClass "evdev keyboard catchall"

[   163.708] (II) Using input driver 'evdev' for 'PMU'

[   163.708] (**) PMU: always reports core events

[   163.709] (**) evdev: PMU: Device: "/dev/input/event4"

[   163.709] (--) evdev: PMU: Vendor 0x1 Product 0x1

[   163.709] (--) evdev: PMU: Found keys

[   163.709] (II) evdev: PMU: Configuring as keyboard

[   163.709] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"

[   163.709] (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD, id 9)

[   163.709] (**) Option "xkb_rules" "evdev"

[   163.709] (**) Option "xkb_model" "evdev"

[   163.709] (**) Option "xkb_layout" "us"

[   169.864] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2

[   169.865] (II) RADEON(0): Added native panel mode using CVT: 1152x768

[   169.888] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0

[   169.888] (II) RADEON(0): Output: S-video, Detected Monitor Type: 0

[   337.058] (II) evdev: PMU: Close

[   337.058] (II) UnloadModule: "evdev"

[   337.059] (II) evdev: ADB mouse: Close

[   337.059] (II) UnloadModule: "evdev"

[   337.059] (II) evdev: ADB Powerbook buttons: Close

[   337.059] (II) UnloadModule: "evdev"

[   337.059] (II) evdev: ADB keyboard: Close

[   337.059] (II) UnloadModule: "evdev"

[   337.088] (II) RADEON(0): RADEONRestoreMemMapRegisters() :

[   337.088] (II) RADEON(0):   MC_FB_LOCATION   : 0x7fff0000 0xbbffb800

[   337.088] (II) RADEON(0):   MC_AGP_LOCATION  : 0xffffe000

[   337.148] Restore Palette 1

[   337.258] finished PLL2

[   337.268] Entering Restore TV

[   337.268] Restore TV PLL

[   337.388] Restore TVHV

[   337.388] Restore TV Restarts

[   337.388] Restore Timing Tables

[   337.388] Restore TV standard

[   337.388] Leaving Restore TV

[   337.760] Server terminated successfully (0). Closing log file.



Well, I don`t know what else could be useful. If you see Radeon framebuffer loaded, its because if I deactivate it in kernel, I can`t boot, just keeps for about 15
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Wed Aug 01, 2012 2:20 pm    Post subject: Reply with quote

...seconds and then i get a purple colored aurora borealis :). If you see radeon framebuffer activated, its because if I dont do this, i could not boot. With this configuration, I can boot normally to console. If I launch startx (I have Xfce installed), Xfce starts, but I cant see text in buttons or menues, but I think this is not Xorg`s fault, but a kernel/driver misconfiguration. I tried everything, from setting things in kernel statically, as well as modules, activated and deactivated many options, but nothing worked.
If I insist its because this card worked just fine with 3d acceleration in previous version of gentoo (this is, previous kernels, and Xorgs, and etc :) ), and I dont see why i wouldnt work now. So i keep thinking this is a misconfiguration, or something that should be configured in a different way than any other radeon card. Well, waiting advice from experts!
If you need any other log, just ask it. Im here, by my pc waiting answers, while keep trying things. Thanks in advance!! :)
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Thu Aug 02, 2012 10:41 pm    Post subject: Reply with quote

Well, i keep trying options.. If I follow gentoo´s guide for hardware acceleration, this is: disabling any framebuffer device in kernel, activating radeon kms, agp, etc, my powerbook doesn`t boot, meaning it reaches kernel loading, but after that, i get that wonderful purple aurora... And I was thinking that when modesetting wasnt made by kernel, you needed to load your card configuration into xorg.conf. And I always needed to load modelines in this file, other way, it would cause the same screen I`m seeing now. But.. is there a way to set modelines in kernel? Or is it just plain autodetect? I still have not too much clear how dri, drm, and kms works now.. So, any hint would be very appreciated! Thank you!! :)
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Sat Aug 04, 2012 2:41 am    Post subject: Reply with quote

Well, some news about my graphic adventure :D. I kept trying not enabling a framebuffer at all, and trying to figure out why my screen showed nothing but a purpled aurora... and all in a sudden.. i thought.. what if i plug my desktop monitor to the vga output of my powerbook and see what happens...? and guess what: it works on my pc monitor! and to show how, here i paste the output of dmesg and Xorg.0.log:

dmesg:

Code:
pci 0001:10:1a.0: BAR 7: assigned [io  0x1000-0x10ff]
pci 0001:10:1a.0: BAR 8: assigned [io  0x1100-0x11ff]
pci 0001:10:1a.0: CardBus bridge to [bus 11-14]
pci 0001:10:1a.0:   bridge window [io  0x1000-0x10ff]
pci 0001:10:1a.0:   bridge window [io  0x1100-0x11ff]
pci 0001:10:1a.0:   bridge window [mem 0x84000000-0x87ffffff pref]
pci 0001:10:1a.0:   bridge window [mem 0x88000000-0x8bffffff]
pci_bus 0000:00: resource 4 [io  0x802000-0x1001fff]
pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
pci_bus 0000:00: resource 6 [mem 0xb0000000-0xbfffffff]
pci_bus 0001:10: resource 4 [io  0x0000-0x7fffff]
pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
pci_bus 0001:10: resource 6 [mem 0x80000000-0xafffffff]
pci_bus 0001:11: resource 0 [io  0x1000-0x10ff]
pci_bus 0001:11: resource 1 [io  0x1100-0x11ff]
pci_bus 0001:11: resource 2 [mem 0x84000000-0x87ffffff pref]
pci_bus 0001:11: resource 3 [mem 0x88000000-0x8bffffff]
pci_bus 0002:24: resource 4 [io  0xff7fe000-0xffffdfff]
pci_bus 0002:24: resource 5 [mem 0xf5000000-0xf5ffffff]
bio: create slab <bio-0> at 0
vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:10.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timebase
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0001:10:18.0: enabling device (0000 -> 0002)
pci 0001:10:19.0: enabling device (0000 -> 0002)
PCI: CLS mismatch (32 != 1020), using 32 bytes
Registering PowerMac CPU frequency driver
Low: 500 Mhz, High: 550 Mhz, Boot: 550 Mhz
NFS: Registering the id_resolver key type
Key type id_resolver registered
NTFS driver 2.1.30 [Flags: R/W].
msgmni has been set to 1000
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Generic RTC Driver v1.07
Generic non-volatile memory driver v1.1
Linux agpgart interface v0.103
agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset
agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
brd: module loaded
loop: module loaded
MacIO PCI driver attached to Keylargo chipset
adb: starting probe task...
mesh: configured for synchronous 5 MB/s
st: Version 20101219, fixed bufsize 32768, s/g segs 256
adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ISO, swapping keys.
input: ADB keyboard as /devices/virtual/input/input0
input: ADB Powerbook buttons as /devices/virtual/input/input1
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse as /devices/virtual/input/input2
adb: finished probe task...
pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
scsi0 : pata_macio
ata1: PATA max UDMA/66 irq 19
ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A2, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA
ata1.00: configured for UDMA/66
scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
scsi1 : pata_macio
ata2: PATA max MWDMA2 irq 20
ata2.00: ATAPI: MATSHITADVD-ROM SR-8187, HA18, max UDMA/33
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-ROM SR-8187  HA18 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 46x/46x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pata-macio 0.00021000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 1
scsi2 : pata_macio
ata3: PATA max MWDMA2 irq 21
sungem.c:v1.0 David S. Miller <davem@redhat.com>
gem 0002:24:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:45:3d:4c
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0001:10:18.0: OHCI Host Controller
ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:18.0: irq 27, io mem 0xa0002000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd 0001:10:19.0: OHCI Host Controller
ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:19.0: irq 28, io mem 0xa0001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
PowerMac i2c bus pmu 2 registered
i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/rtc
i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/adb
i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt
PowerMac i2c bus pmu 1 registered
i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/rtc
i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/adb
i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt
PowerMac i2c bus mac-io 0 registered
i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/cereal
i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/deq
i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
PowerMac i2c bus uni-n 1 registered
i2c i2c-3: i2c-powermac: invalid reg on /uni-n@f8000000/i2c@f8001000/cereal
PowerMac i2c bus uni-n 0 registered
i2c i2c-4: i2c-powermac: invalid reg on /uni-n@f8000000/i2c@f8001000/cereal
APM Battery Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using ppc/7450 performance monitoring.
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
input: PMU as /devices/virtual/input/input3
Registered led device: pmu-led::front
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
devtmpfs: mounted
Freeing unused kernel memory: 200k freed
systemd-udevd[1185]: starting version 187
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
0.00013020:ch-a: ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyS1 at MMIO 0x80013000 (irq = 29) is a Z85c30 ESCC - Infrared port
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:00:10.0: enabling device (0086 -> 0087)
[drm] initializing kernel modesetting (RV100 0x1002:0x4C59 0x1002:0x4C59).
[drm] register mmio base: 0xB0000000
[drm] register mmio size: 65536
radeon 0000:00:10.0: Invalid ROM contents
radeon 0000:00:10.0: Invalid ROM contents
[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[drm] Using device-tree clock info
agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
radeon 0000:00:10.0: putting AGP V2 device into 4x mode
radeon 0000:00:10.0: GTT: 256M 0x00000000 - 0x0FFFFFFF
radeon 0000:00:10.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (16M used)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 256246 kiB
[TTM] Initializing pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 256M of GTT memory ready.
radeon 0000:00:10.0: WB disabled
radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000000000000 and cpu addr 0xe15ba000
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x0000000000001000
[drm] ring test succeeded in 0 usecs
[drm] ib test succeeded in 0 usecs
[drm] Connector Table: 5 (powerbook vga)
[drm] No panel info found in BIOS
[drm] Panel info derived from registers
[drm] Panel Size 1152x768
[drm] radeon legacy LVDS backlight initialized
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   LVDS-1
[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm]   Encoders:
[drm]     LCD1: INTERNAL_LVDS
[drm] Connector 1:
[drm]   VGA-1
[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm]   Encoders:
[drm]     CRT1: INTERNAL_DAC1
[drm] Connector 2:
[drm]   SVIDEO-1
[drm]   Encoders:
[drm]     TV1: INTERNAL_DAC2
[drm] fb mappable at 0xB8040000
[drm] vram apper at 0xB8000000
[drm] size 884736
[drm] fb depth is 8
[drm]    pitch is 1152
[drm:drm_calc_timestamping_constants] *ERROR* crtc 10: Can't calculate constants, dotclock = 0!
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.17.0 20080528 for 0000:00:10.0 on minor 0
EXT3-fs (sda5): using internal journal
Adding 1048572k swap on /dev/sda4.  Priority:-1 extents:1 across:1048572k



Xorg.0.log:

Code:
[    92.235]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    92.238]
X.Org X Server 1.12.99.903 (1.13.0 RC 3)
Release Date: 2012-07-25
[    92.247] X Protocol Version 11, Revision 0
[    92.250] Build Operating System: Linux 3.5.0-gentoo ppc Gentoo
[    92.253] Current Operating System: Linux localhost 3.5.0-gentoo #23 Sat Aug 4 02:10:17 Local time zone must be set--see zic manu ppc
[    92.253] Kernel command line: ro root=/dev/sda5
[    92.259] Build Date: 31 July 2012  05:22:36AM
[    92.261] 
[    92.264] Current version of pixman: 0.26.2
[    92.270]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    92.270] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    92.282] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  4 02:14:10 2012
[    92.369] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    92.395] (==) No Layout section.  Using the first Screen section.
[    92.395] (==) No screen section available. Using defaults.
[    92.395] (**) |-->Screen "Default Screen Section" (0)
[    92.395] (**) |   |-->Monitor "<default monitor>"
[    92.421] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[    92.422] (==) Automatically adding devices
[    92.422] (==) Automatically enabling devices
[    92.422] (==) Automatically adding GPU devices
[    92.503] (==) FontPath set to:
   /usr/share/fonts/misc/,
   /usr/share/fonts/TTF/,
   /usr/share/fonts/OTF/,
   /usr/share/fonts/Type1/,
   /usr/share/fonts/100dpi/,
   /usr/share/fonts/75dpi/
[    92.503] (==) ModulePath set to "/usr/lib/xorg/modules"
[    92.503] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[    92.504] (II) Loader magic: 0x1024c5f8
[    92.504] (II) Module ABI versions:
[    92.504]    X.Org ANSI C Emulation: 0.4
[    92.504]    X.Org Video Driver: 13.0
[    92.504]    X.Org XInput driver : 18.0
[    92.504]    X.Org Server Extension : 6.0
[    92.507] (II) config/udev: Adding drm device (/dev/dri/card0)
[    92.509] (--) PCI:*(0:0:16:0) 1002:4c59:1002:4c59 rev 0, Mem @ 0xb8000000/134217728, 0xb0000000/65536, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[    92.509] (II) Open APM successful
[    92.514] Initializing built-in extension Generic Event Extension
[    92.517] Initializing built-in extension SHAPE
[    92.519] Initializing built-in extension MIT-SHM
[    92.522] Initializing built-in extension XInputExtension
[    92.525] Initializing built-in extension XTEST
[    92.528] Initializing built-in extension BIG-REQUESTS
[    92.531] Initializing built-in extension SYNC
[    92.533] Initializing built-in extension XKEYBOARD
[    92.536] Initializing built-in extension XC-MISC
[    92.539] Initializing built-in extension XINERAMA
[    92.541] Initializing built-in extension XFIXES
[    92.544] Initializing built-in extension RENDER
[    92.547] Initializing built-in extension RANDR
[    92.549] Initializing built-in extension COMPOSITE
[    92.552] Initializing built-in extension DAMAGE
[    92.554] Initializing built-in extension MIT-SCREEN-SAVER
[    92.556] Initializing built-in extension DOUBLE-BUFFER
[    92.559] Initializing built-in extension RECORD
[    92.561] Initializing built-in extension DPMS
[    92.563] Initializing built-in extension X-Resource
[    92.565] Initializing built-in extension XVideo
[    92.568] Initializing built-in extension XVideo-MotionCompensation
[    92.570] Initializing built-in extension XFree86-VidModeExtension
[    92.572] Initializing built-in extension XFree86-DGA
[    92.574] Initializing built-in extension XFree86-DRI
[    92.576] Initializing built-in extension DRI2
[    92.577] (II) LoadModule: "glx"
[    92.629] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    92.687] (II) Module glx: vendor="X.Org Foundation"
[    92.687]    compiled for 1.12.99.903, module version = 1.0.0
[    92.687]    ABI class: X.Org Server Extension, version 6.0
[    92.687] (==) AIGLX enabled
[    92.689] Loading extension GLX
[    92.689] (==) Matched ati as autoconfigured driver 0
[    92.689] (==) Matched ati as autoconfigured driver 1
[    92.689] (==) Matched modesetting as autoconfigured driver 2
[    92.689] (==) Matched fbdev as autoconfigured driver 3
[    92.689] (==) Assigned the driver to the xf86ConfigLayout
[    92.689] (II) LoadModule: "ati"
[    92.744] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    92.758] (II) Module ati: vendor="X.Org Foundation"
[    92.758]    compiled for 1.12.99.903, module version = 6.14.6
[    92.758]    Module class: X.Org Video Driver
[    92.758]    ABI class: X.Org Video Driver, version 13.0
[    92.758] (II) LoadModule: "radeon"
[    92.759] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    92.898] (II) Module radeon: vendor="X.Org Foundation"
[    92.898]    compiled for 1.12.99.903, module version = 6.14.6
[    92.899]    Module class: X.Org Video Driver
[    92.899]    ABI class: X.Org Video Driver, version 13.0
[    92.899] (II) LoadModule: "modesetting"
[    92.951] (WW) Warning, couldn't open module modesetting
[    92.951] (II) UnloadModule: "modesetting"
[    92.951] (II) Unloading modesetting
[    92.951] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    92.951] (II) LoadModule: "fbdev"
[    92.953] (WW) Warning, couldn't open module fbdev
[    92.953] (II) UnloadModule: "fbdev"
[    92.953] (II) Unloading fbdev
[    92.953] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    92.953] (II) RADEON: Driver for ATI Radeon chipsets:
   ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
   ATI Radeon Mobility X300 (M24) 3152 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
   ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
   ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
   ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
   ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
   ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
   ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
   ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
   ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
   ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
   ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
   ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
   ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
   ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
   ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
   ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
   ATI Radeon Mobility X300 (M22) 5460 (PCIE),
   ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
   ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
   ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
   ATI FireGL unknown (R423) UR (PCIE),
   ATI FireGL unknown (R423) UT (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility FireGL V5000 (M26) (PCIE),
   ATI Mobility Radeon X700 XL (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Mobility Radeon X700 (M26) (PCIE),
   ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835,
   ATI Radeon XPRESS 200 5954 (PCIE),
   ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
   ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
   ATI Radeon XPRESS 200M 5975 (PCIE),
   ATI Radeon XPRESS 200 5A41 (PCIE),
   ATI Radeon XPRESS 200M 5A42 (PCIE),
   ATI Radeon XPRESS 200 5A61 (PCIE),
   ATI Radeon XPRESS 200M 5A62 (PCIE),
   ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI Radeon X550 (RV370) 5B63 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
   ATI Mobility Radeon X800 XT (M28) (PCIE),
   ATI Mobility FireGL V5100 (M28) (PCIE),
   ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
   ATI Radeon X850 XT PE (R480) (PCIE),
   ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
   ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
   ATI Radeon X850 XT (R480) (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE),
   ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
   ATI Radeon X700 PRO (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
   ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
   ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
   ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
   ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
   ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
   ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
   ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
   ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
   ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
   ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
   ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
   ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
   ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
   ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
   ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
   ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
   ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
   ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
   ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
   ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
   ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
   ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
   ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
   ATI Mobility Radeon X1700, ATI Radeon X2300HD,
   ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
   ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
   ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
   ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
   ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
   ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
   ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
   ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
   ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
   ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
   ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
   ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
   ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
   ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
   ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
   ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
   ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
   AMD FireStream 9250, ATI FirePro V8700 (FireGL),
   ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
   ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
   ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
   ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
   ATI Mobility Radeon HD 4670, ATI FirePro M5750,
   ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
   ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
   ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
   ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
   ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
   ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
   ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
   ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
   ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
   ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
   ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
   ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
   ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
   ATI Mobility Radeon HD 3850 X2, ATI RV670,
   ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
   ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
   ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
   ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
   ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
   ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
   ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
   ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
   ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
   ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
   ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
   ATI FireGL V3600, ATI Radeon HD 2600 LE,
   ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
   ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
   ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
   ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
   ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
   ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
   ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
   ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
   ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
   ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
   SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
   ATI Radeon 4100, ATI Mobility Radeon HD 4200,
   ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
   AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
   AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
   AMD Radeon HD 6300 Series Graphics,
   AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
   AMD Firestream 9350, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
   ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
   ATI Mobility Radeon HD 5800 Series,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Mobility Radeon HD 5000 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
   ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
   ATI Mobility Radeon HD 5000 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
   ATI Mobility Radeon Graphics, CEDAR,
   ATI FirePro (FireGL) Graphics Adapter,
   ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
   ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
   CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
   AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
   CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
   BARTS, BARTS, Mobility Radeon HD 6000 Series,
   Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
   AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
   AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
   CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
   CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
   ARUBA, ARUBA
[    92.970] (--) using VT number 7

[    93.006] (II) [KMS] Kernel modesetting enabled.
[    93.006] (II) RADEON(0): Creating default Display subsection in Screen section
   "Default Screen Section" for depth/fbbpp 24/32
[    93.006] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    93.007] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    93.007] (==) RADEON(0): Default visual is TrueColor
[    93.007] (==) RADEON(0): RGB weight 888
[    93.007] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    93.007] (--) RADEON(0): Chipset: "ATI Radeon Mobility M6 LY (AGP)" (ChipID = 0x4c59)
[    93.007] (II) RADEON(0): AGP card detected
[    93.008] (II) Loading sub module "exa"
[    93.008] (II) LoadModule: "exa"
[    93.008] (II) Loading /usr/lib/xorg/modules/libexa.so
[    93.028] (II) Module exa: vendor="X.Org Foundation"
[    93.028]    compiled for 1.12.99.903, module version = 2.6.0
[    93.028]    ABI class: X.Org Video Driver, version 13.0
[    93.028] (II) RADEON(0): KMS Color Tiling: disabled
[    93.028] (II) RADEON(0): KMS Pageflipping: enabled
[    93.028] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    93.031] (II) RADEON(0): Output LVDS has no monitor section
[    93.050] (II) RADEON(0): Output VGA-0 has no monitor section
[    93.050] (II) RADEON(0): Output S-video has no monitor section
[    93.052] (II) RADEON(0): EDID for output LVDS
[    93.068] (II) RADEON(0): Printing probed modes for output LVDS
[    93.068] (II) RADEON(0): Modeline "1152x768"x59.8   62.00  1152 1200 1232 1312  768 771 781 790 +hsync -vsync (47.3 kHz eP)
[    93.068] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    93.068] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    93.068] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    93.068] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    93.068] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    93.087] (II) RADEON(0): EDID for output VGA-0
[    93.087] (II) RADEON(0): Printing probed modes for output VGA-0
[    93.087] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    93.087] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    93.087] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    93.087] (II) RADEON(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    93.087] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[    93.087] (II) RADEON(0): EDID for output S-video
[    93.088] (II) RADEON(0): Output LVDS connected
[    93.088] (II) RADEON(0): Output VGA-0 connected
[    93.088] (II) RADEON(0): Output S-video disconnected
[    93.088] (II) RADEON(0): Using fuzzy aspect match for initial modes
[    93.088] (II) RADEON(0): Output LVDS using initial mode 1024x768
[    93.088] (II) RADEON(0): Output VGA-0 using initial mode 1024x768
[    93.088] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    93.088] (II) RADEON(0): mem size init: gart size :fdff000 vram size: s:1000000 visible:ee8000
[    93.088] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
[    93.088] (==) RADEON(0): DPI set to (96, 96)
[    93.088] (II) Loading sub module "fb"
[    93.088] (II) LoadModule: "fb"
[    93.089] (II) Loading /usr/lib/xorg/modules/libfb.so
[    93.110] (II) Module fb: vendor="X.Org Foundation"
[    93.110]    compiled for 1.12.99.903, module version = 1.0.0
[    93.110]    ABI class: X.Org ANSI C Emulation, version 0.4
[    93.110] (II) Loading sub module "ramdac"
[    93.110] (II) LoadModule: "ramdac"
[    93.110] (II) Module "ramdac" already built-in
[    93.110] (--) Depth 24 pixmap format is 32 bpp
[    93.110] (II) RADEON(0): [DRI2] Setup complete
[    93.111] (II) RADEON(0): [DRI2]   DRI driver: radeon
[    93.111] (II) RADEON(0): [DRI2]   VDPAU driver: radeon
[    93.111] (II) RADEON(0): Front buffer size: 3072K
[    93.112] (II) RADEON(0): VRAM usage limit set to 10972K
[    93.127] (==) RADEON(0): Backing store disabled
[    93.127] (II) RADEON(0): Direct rendering enabled
[    93.142] (II) RADEON(0): Render acceleration enabled for R100 type cards.
[    93.142] (II) RADEON(0): Setting EXA maxPitchBytes
[    93.142] (II) EXA(0): Driver allocated offscreen pixmaps
[    93.143] (II) EXA(0): Driver registered support for the following operations:
[    93.143] (II)         Solid
[    93.143] (II)         Copy
[    93.143] (II)         Composite (RENDER acceleration)
[    93.143] (II)         UploadToScreen
[    93.143] (II)         DownloadFromScreen
[    93.164] (II) RADEON(0): Acceleration enabled
[    93.164] (==) RADEON(0): DPMS enabled
[    93.164] (==) RADEON(0): Silken mouse enabled
[    93.189] (II) RADEON(0): Set up textured video
[    93.189] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    93.190] (II) RADEON(0): [XvMC] Extension initialized.
[    93.190] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    93.194] (--) RandR disabled
[    93.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    93.606] (II) AIGLX: enabled GLX_INTEL_swap_event
[    93.606] (II) AIGLX: enabled GLX_ARB_create_context
[    93.606] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    93.606] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    93.606] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    93.606] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    93.607] (II) AIGLX: Loaded and initialized radeon
[    93.608] (II) GLX: Initialized DRI2 GL provider for screen 0
[    94.443] (II) RADEON(0): Setting screen physical size to 270 x 203
[    96.201] (II) config/udev: Adding drm device (/dev/dri/card0)
[    96.204] (II) config/udev: Adding input device ADB keyboard (/dev/input/event0)
[    96.204] (**) ADB keyboard: Applying InputClass "evdev keyboard catchall"
[    96.204] (II) LoadModule: "evdev"
[    96.205] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    96.263] (II) Module evdev: vendor="X.Org Foundation"
[    96.263]    compiled for 1.12.99.902, module version = 2.7.1
[    96.263]    Module class: X.Org XInput Driver
[    96.263]    ABI class: X.Org XInput driver, version 18.0
[    96.263] (II) Using input driver 'evdev' for 'ADB keyboard'
[    96.264] (**) ADB keyboard: always reports core events
[    96.264] (**) evdev: ADB keyboard: Device: "/dev/input/event0"
[    96.264] (--) evdev: ADB keyboard: Vendor 0x1 Product 0x22c4
[    96.264] (--) evdev: ADB keyboard: Found keys
[    96.265] (II) evdev: ADB keyboard: Configuring as keyboard
[    96.265] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[    96.265] (II) XINPUT: Adding extended input device "ADB keyboard" (type: KEYBOARD, id 6)
[    96.265] (**) Option "xkb_rules" "evdev"
[    96.265] (**) Option "xkb_model" "evdev"
[    96.265] (**) Option "xkb_layout" "us"
[    96.441] (II) config/udev: Adding input device ADB Powerbook buttons (/dev/input/event1)
[    96.441] (**) ADB Powerbook buttons: Applying InputClass "evdev keyboard catchall"
[    96.441] (II) Using input driver 'evdev' for 'ADB Powerbook buttons'
[    96.441] (**) ADB Powerbook buttons: always reports core events
[    96.442] (**) evdev: ADB Powerbook buttons: Device: "/dev/input/event1"
[    96.442] (--) evdev: ADB Powerbook buttons: Vendor 0x1 Product 0x771f
[    96.442] (--) evdev: ADB Powerbook buttons: Found keys
[    96.442] (II) evdev: ADB Powerbook buttons: Configuring as keyboard
[    96.442] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
[    96.442] (II) XINPUT: Adding extended input device "ADB Powerbook buttons" (type: KEYBOARD, id 7)
[    96.442] (**) Option "xkb_rules" "evdev"
[    96.442] (**) Option "xkb_model" "evdev"
[    96.442] (**) Option "xkb_layout" "us"
[    96.446] (II) config/udev: Adding input device ADB mouse (/dev/input/event2)
[    96.446] (**) ADB mouse: Applying InputClass "evdev pointer catchall"
[    96.446] (II) Using input driver 'evdev' for 'ADB mouse'
[    96.446] (**) ADB mouse: always reports core events
[    96.446] (**) evdev: ADB mouse: Device: "/dev/input/event2"
[    96.447] (--) evdev: ADB mouse: Vendor 0x1 Product 0x3301
[    96.447] (--) evdev: ADB mouse: Found 3 mouse buttons
[    96.447] (--) evdev: ADB mouse: Found relative axes
[    96.447] (--) evdev: ADB mouse: Found x and y relative axes
[    96.447] (II) evdev: ADB mouse: Configuring as mouse
[    96.447] (**) evdev: ADB mouse: YAxisMapping: buttons 4 and 5
[    96.447] (**) evdev: ADB mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    96.447] (**) Option "config_info" "udev:/sys/devices/virtual/input/input2/event2"
[    96.447] (II) XINPUT: Adding extended input device "ADB mouse" (type: MOUSE, id 8)
[    96.448] (II) evdev: ADB mouse: initialized for relative axes.
[    96.449] (**) ADB mouse: (accel) keeping acceleration scheme 1
[    96.449] (**) ADB mouse: (accel) acceleration profile 0
[    96.449] (**) ADB mouse: (accel) acceleration factor: 2.000
[    96.449] (**) ADB mouse: (accel) acceleration threshold: 4
[    96.451] (II) config/udev: Adding input device ADB mouse (/dev/input/mouse0)
[    96.451] (II) No input driver specified, ignoring this device.
[    96.451] (II) This device may have been added with another device file.
[    96.452] (II) config/udev: Adding input device PMU (/dev/input/event3)
[    96.452] (**) PMU: Applying InputClass "evdev keyboard catchall"
[    96.452] (II) Using input driver 'evdev' for 'PMU'
[    96.452] (**) PMU: always reports core events
[    96.453] (**) evdev: PMU: Device: "/dev/input/event3"
[    96.453] (--) evdev: PMU: Vendor 0x1 Product 0x1
[    96.453] (--) evdev: PMU: Found keys
[    96.453] (II) evdev: PMU: Configuring as keyboard
[    96.453] (**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event3"
[    96.453] (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD, id 9)
[    96.453] (**) Option "xkb_rules" "evdev"
[    96.453] (**) Option "xkb_model" "evdev"
[    96.453] (**) Option "xkb_layout" "us"
[   358.120] (II) AIGLX: Suspending AIGLX clients for VT switch
[   467.041] (II) evdev: PMU: Close
[   467.042] (II) UnloadModule: "evdev"
[   467.042] (II) evdev: ADB mouse: Close
[   467.042] (II) UnloadModule: "evdev"
[   467.042] (II) evdev: ADB Powerbook buttons: Close
[   467.042] (II) UnloadModule: "evdev"
[   467.042] (II) evdev: ADB keyboard: Close
[   467.042] (II) UnloadModule: "evdev"
[   467.083] Server terminated successfully (0). Closing log file.


I started Xfced with startx, and all was ok!! No problems with fonts, and acceleration works like a charm.. but in my vga, not my notebook screen... Like I said, i used to have this problem, and i used to solve it by adding correct modelines in my xorg.conf... but... how do i solve it in new kms?? any ideas? cheers!!
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Sat Aug 04, 2012 2:52 pm    Post subject: Reply with quote

Well, loogink through my Xorg log, i see this line:

Quote:
[ 93.088] (II) RADEON(0): Output LVDS using initial mode 1024x768


I remember that my screen never worked with such a resolution, bringing me the famous purple screen.. I think I can manage to force loading the right screen resolution for X to work.. Still, it doesn`t solve my problem of the same purple screen in pure console.. I gonna try to load right resolution to launch startx at least. Waiting for advice while searching... Thank you!
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Mon Aug 06, 2012 9:43 pm    Post subject: Reply with quote

Hi, I keep trying to solve something... the only way to make xorg run, is following gentoo´s guide, but that way, I have no image in my main display (LVDS from now on). Just image through VGA or S-Video to my television. Doing things the right way, i get this relevant lines in dmseg:

Quote:
Linux agpgart interface v0.103
agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset
agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:00:10.0: enabling device (0086 -> 0087)
[drm] initializing kernel modesetting (RV100 0x1002:0x4C59 0x1002:0x4C59).
[drm] register mmio base: 0xB0000000
[drm] register mmio size: 65536
radeon 0000:00:10.0: Invalid ROM contents
radeon 0000:00:10.0: Invalid ROM contents
[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[drm] Using device-tree clock info
agpgart-uninorth 0000:00:0b.0: putting AGP V2 device into 4x mode
radeon 0000:00:10.0: putting AGP V2 device into 4x mode
radeon 0000:00:10.0: GTT: 256M 0x00000000 - 0x0FFFFFFF
radeon 0000:00:10.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (16M used)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 255526 kiB
[TTM] Initializing pool allocator
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 256M of GTT memory ready.
radeon 0000:00:10.0: WB disabled
radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000000000000 and cpu addr 0xe1070000
[drm] Loading R100 Microcode
[drm] radeon: ring at 0x0000000000001000
[drm] ring test succeeded in 0 usecs
[drm] ib test succeeded in 0 usecs
[drm] Connector Table: 5 (powerbook vga)
[drm] No panel info found in BIOS
[drm] Panel info derived from registers
[drm] Panel Size 1152x768
[drm] radeon legacy LVDS backlight initialized
[drm] No TV DAC info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
[drm] fb mappable at 0xB8040000
[drm] vram apper at 0xB8000000
[drm] size 884736
[drm] fb depth is 8
[drm] pitch is 1152
[drm:drm_calc_timestamping_constants] *ERROR* crtc 10: Can't calculate constants, dotclock = 0!
[drm] crtc 1 is connected to a TV
Console: switching to colour frame buffer device 100x37
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.17.0 20080528 for 0000:00:10.0 on minor 0
brd: module loaded


and Xorg.0.log

Quote:
[ 1372.776]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 1372.778]
X.Org X Server 1.12.99.903 (1.13.0 RC 3)
Release Date: 2012-07-25
[ 1372.784] X Protocol Version 11, Revision 0
[ 1372.786] Build Operating System: Linux 3.5.0-gentoo ppc Gentoo
[ 1372.788] Current Operating System: Linux localhost 3.5.0-gentoo #28 Mon Aug 6 17:46:16 ART 2012 ppc
[ 1372.788] Kernel command line: ro root=/dev/sda5 fbcon=map
[ 1372.793] Build Date: 31 July 2012 05:22:36AM
[ 1372.795]
[ 1372.797] Current version of pixman: 0.26.2
[ 1372.801] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1372.801] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1372.811] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 6 18:19:00 2012
[ 1372.814] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1372.815] (==) No Layout section. Using the first Screen section.
[ 1372.815] (==) No screen section available. Using defaults.
[ 1372.815] (**) |-->Screen "Default Screen Section" (0)
[ 1372.815] (**) | |-->Monitor "<default monitor>"
[ 1372.816] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1372.816] (==) Automatically adding devices
[ 1372.816] (==) Automatically enabling devices
[ 1372.816] (==) Automatically adding GPU devices
[ 1372.816] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1372.816] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1372.816] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1372.816] (II) Loader magic: 0x1024c5f8
[ 1372.816] (II) Module ABI versions:
[ 1372.816] X.Org ANSI C Emulation: 0.4
[ 1372.817] X.Org Video Driver: 13.0
[ 1372.817] X.Org XInput driver : 18.0
[ 1372.817] X.Org Server Extension : 6.0
[ 1372.819] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1372.821] (--) PCI:*(0:0:16:0) 1002:4c59:1002:4c59 rev 0, Mem @ 0xb8000000/134217728, 0xb0000000/65536, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[ 1372.822] (II) Open APM successful
[ 1372.824] Initializing built-in extension Generic Event Extension
[ 1372.826] Initializing built-in extension SHAPE
[ 1372.828] Initializing built-in extension MIT-SHM
[ 1372.830] Initializing built-in extension XInputExtension
[ 1372.832] Initializing built-in extension XTEST
[ 1372.834] Initializing built-in extension BIG-REQUESTS
[ 1372.836] Initializing built-in extension SYNC
[ 1372.838] Initializing built-in extension XKEYBOARD
[ 1372.840] Initializing built-in extension XC-MISC
[ 1372.842] Initializing built-in extension XINERAMA
[ 1372.844] Initializing built-in extension XFIXES
[ 1372.846] Initializing built-in extension RENDER
[ 1372.848] Initializing built-in extension RANDR
[ 1372.849] Initializing built-in extension COMPOSITE
[ 1372.851] Initializing built-in extension DAMAGE
[ 1372.853] Initializing built-in extension MIT-SCREEN-SAVER
[ 1372.854] Initializing built-in extension DOUBLE-BUFFER
[ 1372.856] Initializing built-in extension RECORD
[ 1372.857] Initializing built-in extension DPMS
[ 1372.859] Initializing built-in extension X-Resource
[ 1372.860] Initializing built-in extension XVideo
[ 1372.862] Initializing built-in extension XVideo-MotionCompensation
[ 1372.863] Initializing built-in extension XFree86-VidModeExtension
[ 1372.865] Initializing built-in extension XFree86-DGA
[ 1372.866] Initializing built-in extension XFree86-DRI
[ 1372.867] Initializing built-in extension DRI2
[ 1372.867] (II) LoadModule: "glx"
[ 1372.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1372.869] (II) Module glx: vendor="X.Org Foundation"
[ 1372.870] compiled for 1.12.99.903, module version = 1.0.0
[ 1372.870] ABI class: X.Org Server Extension, version 6.0
[ 1372.870] (==) AIGLX enabled
[ 1372.871] Loading extension GLX
[ 1372.871] (==) Matched ati as autoconfigured driver 0
[ 1372.871] (==) Matched ati as autoconfigured driver 1
[ 1372.871] (==) Matched modesetting as autoconfigured driver 2
[ 1372.871] (==) Matched fbdev as autoconfigured driver 3
[ 1372.871] (==) Assigned the driver to the xf86ConfigLayout
[ 1372.871] (II) LoadModule: "ati"
[ 1372.872] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 1372.920] (II) Module ati: vendor="X.Org Foundation"
[ 1372.920] compiled for 1.12.99.903, module version = 6.14.6
[ 1372.920] Module class: X.Org Video Driver
[ 1372.920] ABI class: X.Org Video Driver, version 13.0
[ 1372.921] (II) LoadModule: "radeon"
[ 1372.921] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 1372.923] (II) Module radeon: vendor="X.Org Foundation"
[ 1372.923] compiled for 1.12.99.903, module version = 6.14.6
[ 1372.923] Module class: X.Org Video Driver
[ 1372.923] ABI class: X.Org Video Driver, version 13.0
[ 1372.923] (II) LoadModule: "modesetting"
[ 1372.925] (WW) Warning, couldn't open module modesetting
[ 1372.925] (II) UnloadModule: "modesetting"
[ 1372.925] (II) Unloading modesetting
[ 1372.925] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1372.925] (II) LoadModule: "fbdev"
[ 1372.926] (WW) Warning, couldn't open module fbdev
[ 1372.926] (II) UnloadModule: "fbdev"
[ 1372.926] (II) Unloading fbdev
[ 1372.926] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1372.926] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA
[ 1372.943] (--) using VT number 7

[ 1372.953] (II) [KMS] Kernel modesetting enabled.
[ 1372.953] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1372.953] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 1372.954] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1372.954] (==) RADEON(0): Default visual is TrueColor
[ 1372.954] (==) RADEON(0): RGB weight 888
[ 1372.954] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 1372.954] (--) RADEON(0): Chipset: "ATI Radeon Mobility M6 LY (AGP)" (ChipID = 0x4c59)
[ 1372.954] (II) RADEON(0): AGP card detected
[ 1372.954] (II) Loading sub module "exa"
[ 1372.955] (II) LoadModule: "exa"
[ 1372.955] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1372.961] (II) Module exa: vendor="X.Org Foundation"
[ 1372.962] compiled for 1.12.99.903, module version = 2.6.0
[ 1372.962] ABI class: X.Org Video Driver, version 13.0
[ 1372.962] (II) RADEON(0): KMS Color Tiling: disabled
[ 1372.962] (II) RADEON(0): KMS Pageflipping: enabled
[ 1372.962] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 1372.964] (II) RADEON(0): Output LVDS has no monitor section
[ 1373.000] (II) RADEON(0): Output VGA-0 has no monitor section
[ 1373.003] (II) RADEON(0): Output S-video has no monitor section
[ 1373.005] (II) RADEON(0): EDID for output LVDS
[ 1373.005] (II) RADEON(0): Printing probed modes for output LVDS
[ 1373.005] (II) RADEON(0): Modeline "1152x768"x59.8 62.00 1152 1200 1232 1312 768 771 781 790 +hsync -vsync (47.3 kHz eP)
[ 1373.005] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 1373.005] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 1373.005] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 1373.006] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 1373.006] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 1373.041] (II) RADEON(0): EDID for output VGA-0
[ 1373.044] (II) RADEON(0): EDID for output S-video
[ 1373.044] (II) RADEON(0): Printing probed modes for output S-video
[ 1373.044] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz eP)
[ 1373.044] (II) RADEON(0): Output LVDS connected
[ 1373.044] (II) RADEON(0): Output VGA-0 disconnected
[ 1373.044] (II) RADEON(0): Output S-video connected
[ 1373.044] (II) RADEON(0): Using exact sizes for initial modes
[ 1373.044] (II) RADEON(0): Output LVDS using initial mode 800x600
[ 1373.044] (II) RADEON(0): Output S-video using initial mode 800x600
[ 1373.044] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1373.044] (II) RADEON(0): mem size init: gart size :fdff000 vram size: s:1000000 visible:ee8000
[ 1373.044] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
[ 1373.044] (==) RADEON(0): DPI set to (96, 96)
[ 1373.044] (II) Loading sub module "fb"
[ 1373.044] (II) LoadModule: "fb"
[ 1373.045] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1373.047] (II) Module fb: vendor="X.Org Foundation"
[ 1373.047] compiled for 1.12.99.903, module version = 1.0.0
[ 1373.047] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1373.047] (II) Loading sub module "ramdac"
[ 1373.047] (II) LoadModule: "ramdac"
[ 1373.047] (II) Module "ramdac" already built-in
[ 1373.047] (--) Depth 24 pixmap format is 32 bpp
[ 1373.047] (II) RADEON(0): [DRI2] Setup complete
[ 1373.047] (II) RADEON(0): [DRI2] DRI driver: radeon
[ 1373.047] (II) RADEON(0): [DRI2] VDPAU driver: radeon
[ 1373.048] (II) RADEON(0): Front buffer size: 1952K
[ 1373.048] (II) RADEON(0): VRAM usage limit set to 11980K
[ 1373.049] (==) RADEON(0): Backing store disabled
[ 1373.049] (II) RADEON(0): Direct rendering enabled
[ 1373.049] (II) RADEON(0): Render acceleration enabled for R100 type cards.
[ 1373.049] (II) RADEON(0): Setting EXA maxPitchBytes
[ 1373.049] (II) EXA(0): Driver allocated offscreen pixmaps
[ 1373.049] (II) EXA(0): Driver registered support for the following operations:
[ 1373.049] (II) Solid
[ 1373.049] (II) Copy
[ 1373.049] (II) Composite (RENDER acceleration)
[ 1373.049] (II) UploadToScreen
[ 1373.049] (II) DownloadFromScreen
[ 1373.049] (II) RADEON(0): Acceleration enabled
[ 1373.049] (==) RADEON(0): DPMS enabled
[ 1373.050] (==) RADEON(0): Silken mouse enabled
[ 1373.050] (II) RADEON(0): Set up textured video
[ 1373.050] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 1373.050] (II) RADEON(0): [XvMC] Extension initialized.
[ 1373.050] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1373.412] (--) RandR disabled
[ 1373.501] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1373.501] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1373.501] (II) AIGLX: enabled GLX_ARB_create_context
[ 1373.501] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1373.501] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1373.501] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1373.501] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1373.503] (II) AIGLX: Loaded and initialized radeon
[ 1373.503] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1374.517] (II) RADEON(0): Setting screen physical size to 211 x 158
[ 1375.512] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1375.515] (II) config/udev: Adding input device ADB keyboard (/dev/input/event0)
[ 1375.515] (**) ADB keyboard: Applying InputClass "evdev keyboard catchall"
[ 1375.515] (II) LoadModule: "evdev"
[ 1375.516] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1375.517] (II) Module evdev: vendor="X.Org Foundation"
[ 1375.517] compiled for 1.12.99.902, module version = 2.7.1
[ 1375.517] Module class: X.Org XInput Driver
[ 1375.517] ABI class: X.Org XInput driver, version 18.0
[ 1375.517] (II) Using input driver 'evdev' for 'ADB keyboard'
[ 1375.517] (**) ADB keyboard: always reports core events
[ 1375.517] (**) evdev: ADB keyboard: Device: "/dev/input/event0"
[ 1375.518] (--) evdev: ADB keyboard: Vendor 0x1 Product 0x22c4
[ 1375.518] (--) evdev: ADB keyboard: Found keys
[ 1375.518] (II) evdev: ADB keyboard: Configuring as keyboard
[ 1375.518] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 1375.518] (II) XINPUT: Adding extended input device "ADB keyboard" (type: KEYBOARD, id 6)
[ 1375.518] (**) Option "xkb_rules" "evdev"
[ 1375.518] (**) Option "xkb_model" "evdev"
[ 1375.519] (**) Option "xkb_layout" "us"
[ 1375.694] (II) config/udev: Adding input device ADB Powerbook buttons (/dev/input/event1)
[ 1375.695] (**) ADB Powerbook buttons: Applying InputClass "evdev keyboard catchall"
[ 1375.695] (II) Using input driver 'evdev' for 'ADB Powerbook buttons'
[ 1375.695] (**) ADB Powerbook buttons: always reports core events
[ 1375.695] (**) evdev: ADB Powerbook buttons: Device: "/dev/input/event1"
[ 1375.695] (--) evdev: ADB Powerbook buttons: Vendor 0x1 Product 0x771f
[ 1375.695] (--) evdev: ADB Powerbook buttons: Found keys
[ 1375.695] (II) evdev: ADB Powerbook buttons: Configuring as keyboard
[ 1375.695] (**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
[ 1375.695] (II) XINPUT: Adding extended input device "ADB Powerbook buttons" (type: KEYBOARD, id 7)
[ 1375.695] (**) Option "xkb_rules" "evdev"
[ 1375.696] (**) Option "xkb_model" "evdev"
[ 1375.696] (**) Option "xkb_layout" "us"
[ 1375.699] (II) config/udev: Adding input device ADB mouse (/dev/input/event2)
[ 1375.699] (**) ADB mouse: Applying InputClass "evdev pointer catchall"
[ 1375.699] (II) Using input driver 'evdev' for 'ADB mouse'
[ 1375.699] (**) ADB mouse: always reports core events
[ 1375.700] (**) evdev: ADB mouse: Device: "/dev/input/event2"
[ 1375.700] (--) evdev: ADB mouse: Vendor 0x1 Product 0x3301
[ 1375.700] (--) evdev: ADB mouse: Found 3 mouse buttons
[ 1375.700] (--) evdev: ADB mouse: Found relative axes
[ 1375.700] (--) evdev: ADB mouse: Found x and y relative axes
[ 1375.700] (II) evdev: ADB mouse: Configuring as mouse
[ 1375.700] (**) evdev: ADB mouse: YAxisMapping: buttons 4 and 5
[ 1375.700] (**) evdev: ADB mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1375.701] (**) Option "config_info" "udev:/sys/devices/virtual/input/input2/event2"
[ 1375.701] (II) XINPUT: Adding extended input device "ADB mouse" (type: MOUSE, id 8)
[ 1375.701] (II) evdev: ADB mouse: initialized for relative axes.
[ 1375.702] (**) ADB mouse: (accel) keeping acceleration scheme 1
[ 1375.702] (**) ADB mouse: (accel) acceleration profile 0
[ 1375.702] (**) ADB mouse: (accel) acceleration factor: 2.000
[ 1375.702] (**) ADB mouse: (accel) acceleration threshold: 4
[ 1375.704] (II) config/udev: Adding input device ADB mouse (/dev/input/mouse0)
[ 1375.704] (II) No input driver specified, ignoring this device.
[ 1375.704] (II) This device may have been added with another device file.
[ 1375.705] (II) config/udev: Adding input device PMU (/dev/input/event3)
[ 1375.705] (**) PMU: Applying InputClass "evdev keyboard catchall"
[ 1375.705] (II) Using input driver 'evdev' for 'PMU'
[ 1375.705] (**) PMU: always reports core events
[ 1375.706] (**) evdev: PMU: Device: "/dev/input/event3"
[ 1375.706] (--) evdev: PMU: Vendor 0x1 Product 0x1
[ 1375.706] (--) evdev: PMU: Found keys
[ 1375.706] (II) evdev: PMU: Configuring as keyboard
[ 1375.706] (**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event3"
[ 1375.706] (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD, id 9)
[ 1375.706] (**) Option "xkb_rules" "evdev"
[ 1375.706] (**) Option "xkb_model" "evdev"
[ 1375.706] (**) Option "xkb_layout" "us"
[ 1376.179] (II) RADEON(0): Allocate new frame buffer 1152x768 stride 1152
[ 1376.180] (II) RADEON(0): VRAM usage limit set to 10627K
[ 1448.219] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1452.640] (II) evdev: PMU: Close
[ 1452.641] (II) UnloadModule: "evdev"
[ 1452.641] (II) evdev: ADB mouse: Close
[ 1452.641] (II) UnloadModule: "evdev"
[ 1452.641] (II) evdev: ADB Powerbook buttons: Close
[ 1452.641] (II) UnloadModule: "evdev"
[ 1452.641] (II) evdev: ADB keyboard: Close
[ 1452.641] (II) UnloadModule: "evdev"
[ 1452.661] Server terminated successfully (0). Closing log file.


If somebody sees something that shouldn`t be there.. will be much appreciated :). I really have no clue. Even disabling KMS on kernel, and having 3D disabled, cant get Xorg to work, no text in boxes, and after some minutes, it freezes.. Thank you!
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Tue Aug 07, 2012 8:58 am    Post subject: Reply with quote

Unfortunately, it seems to me that radeon on powerpc is in the advanced state of decay. I have a G4 powermac with a R300 based card, and it is a pain nowadays, while it used to work very decently abbout five years ago. From what I learned when I last tried it (a couple of months ago), KMS and gallium are unstable at best, and the only way to get them to work decently is to completely disable AGP (there's an option to the radeon KMS module, don't remember from the top of my head). What works for me is

- The old radeon framebuffer driver, _no_ KMS
- The xorg "radeon" driver which will revert to the old, non-modesetting code this way
- 3D with the MESA "classic" driver

This gives me a working desktop and basic 3D. However, those old drivers are not maintained anymore and slowly bitrotting, 3D is unstable and freezes the machine every now and then, so it's best to keep away from it. In particular, don't use a compositing window manager. Also, take a look at "man radeon"; there is a small set of ppc specific options to the non-modesetting driver which affect the enumeration of outputs and might fix your problems with the panel. Also, try to enforce a supported resultion via xorg.conf. I think KMS is only worth to bother with if there is absolutely no success this way.
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Wed Aug 08, 2012 4:58 pm    Post subject: Reply with quote

Well, my problem es "partially" solved. Thank you DirtyHairy for your directions, they were of much help for me! After reading this, and finding Gentoo PPC FAQ, i did disable KMS, enabled radeon framebuffer, and made a basic xorg.conf. Anyway, there is no way to have even a basic 3D acceleration, i keep getting a working desktop, but no way to read fonts (they appear garbbled and unreadable), this is when using a 24 color depth. If I use 16 color depth, fonts are displayed, but so so so whithe, that it is impossible to see if you dont select it to read :). In addition, colors are not displayed correctly. I don`t know if i explain myself right, not english speaker and i`m doing my best, haha! I can post a picture perhaps later to graphic what i`m saying. So, the only way to make xorg work, was to add Option NoAccel true.. this mean, no acceleration at all. That way, i have Xfce working. Of course, i`m not satisfied with the results, and will keep trying options to make this work as it should, until something make me think its impossible, haha! So I don`t consider to mark this post as solved.. but this is my opinion, not admins one, haha! Thank you so very very much for helping me.. I`ll keep in touch for news!!
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Wed Aug 08, 2012 7:54 pm    Post subject: Reply with quote

Glad it helped. You should be able to get (most likely unstable) 3D acceleration using the mesa "classic" driver (via eselect). As for the funky colors, you can play around with either XAA or EXA; there's a bunch of options to toggle various options for both of those. As an alternative, I remember having a funky color issue with an older radeon in my powermac which I worked around by hacking cairo. Take a look at https://bugs.gentoo.org/show_bug.cgi?id=186281 , there's more information on that specific problem there (which might or might not be the same issue you are seeing). I also attached a bunch of cairo patches there, if you manage to hack them into modern day's cairo, it might solve your problem.
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Wed Aug 08, 2012 9:17 pm    Post subject: Reply with quote

Thank you! One curious thing about eselect mesa is the result. Perhaps you could tell me if the results are ok:

Quote:
localhost:~ # eselect mesa list

i915 ( Intel 915, 945)
i965 ( Intel 965, G/Q3x, G/Q4x)
r300 (Radeon R30-R500)
[1] gallium *
r600 (Radeon R600-R700, Evergreen, Northern Islands)
[1] gallium *
sw (Software renderer)
[1] classic *
[2] gallium



Even having radeon and r100 in my VIDEO_CARDS, doesnt seem to be reflected here, perhaps because its not supported for hardware acceleration? and the only classic thing i see about mesa, is Software Renderer... i don`t know, if its ok, I keep going through other options, thank you very much again! :)

P.D: About EXA/XAA, thats is something i always had problems with. But I always solved it by using XAA acceleration setted in xorg.conf. But, now, even choosing XAA as architecture, in my xorg`s log I see the option is setted, but after that, a lot references to EXA, like if it is being ignored... Right now I`m compiling webkit, wich will take for ever at this speed :). After that, I can post my logs with/without setting XAA in xorg, to see if there is difference. And this thing about colors, and fonts was usually corrected by choosing XAA. But here, it looks like XAA is not being used.
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Thu Aug 09, 2012 7:33 am    Post subject: Reply with quote

For mesa, what you are looking for is the r300 classic driver. However, afaik, it has been removed in mesa 8; the only way to get it back is to dowgrade mesa to 7.x. As for XAA vs. EXA, I don't know, could you post your Xorg.0.log (preferably via pastebin)?
Back to top
View user's profile Send private message
Massimo B.
Veteran
Veteran


Joined: 09 Feb 2005
Posts: 1169
Location: PB, Germany

PostPosted: Thu Aug 09, 2012 2:28 pm    Post subject: Reply with quote

At least with my currently installed mesa-7.11.2 I always had EXA enabled on the PB G4 with radeon, as well as a working DRI:
Code:
$ grep EXA /var/log/Xorg.0.log.old
[    36.592] (**) RADEON(0): Option "AccelMethod" "EXA"
[    43.671] (**) RADEON(0): Using EXA acceleration architecture
[    44.144] (II) RADEON(0): Setting EXA maxPitchBytes
[    44.144] (II) EXA(0): Offscreen pixmap area of 128532480 bytes
[    44.144] (II) EXA(0): Driver registered support for the following operations:

$ grep DRI /var/log/Xorg.0.log.old
[    36.105] (II) Loading extension XFree86-DRI
[    36.211] (II) Loading extension DRI2
[    36.592] (**) RADEON(0): Option "DRI" "true"
[    43.448] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
[    45.046] (II) AIGLX: Screen 0 is not DRI2 capable
[    45.046] (II) AIGLX: Screen 0 is not DRI capable
[    45.667] (II) GLX: Initialized DRISWRAST GL provider for screen 0

Then my mesa is set to Gallium:
Code:
$ eselect mesa list
i915 (Intel 915, 945)
i965 (Intel 965, G/Q3x, G/Q4x)
r300 (Radeon R300-R500)
  [1]   classic
  [2]   gallium *
r600 (Radeon R600-R700, Evergreen, Northern Islands)
  [1]   classic
  [2]   gallium *
sw (Software renderer)
  [1]   classic
  [2]   gallium *

So lets check why mesa-8 fails building and why Xorg does not start at all currently...
/var/log/Xorg.0.log:
(EE) Failed to load module "radeon" (module requirement mismatch, 0)

_________________
ppc:PowerBook5,8 15"(1440)-G4/1.67, 2G(dev.notes[pdf]) | amd64:Core2Duo,i5-3470 | amd64-prefix:OpenSuse@Core2Quad | Lila-Theme
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Thu Aug 09, 2012 3:05 pm    Post subject: Reply with quote

Massimo, to me it looks like your DRI is _not_ working, according to the line in the log where it says so ;) Did you get KMS to work?
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Fri Aug 10, 2012 8:06 pm    Post subject: Reply with quote

DirtyHairy: Here is my Xorg.log: http://pastebin.com/6Hci5Afq

This is generated by this xorg.conf:

Quote:
Section "Monitor"
Identifer "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"

Identifier "Card0"
Driver "radeon"
BusID "PCI:0:16:0"
Option "BusType" "PCI"
Option "EnablePageFlip" "true"
Option "AccelMethod" "XAA"
EndSection



After that, irrelevant Screen Section. This options you see in xorg.conf, are just options i was trying after reading man radeon.. but no matter what i set.. results are the same. I loaded a couple of pictures too, for you to see what my desktop looks like, if i don`t disable acceleration through "NoAccel" "true":

http://imageshack.us/photo/my-images/689/img20120810162637.jpg/

http://imageshack.us/photo/my-images/853/img20120810162659.jpg/

As it can be seen, no text is displayed in menus, as in buttons.

Massimo, welcome to the DRI_not_working club, haha! take a sit, feel comfortable... :P

P.D: Dirty, do you think I should consider downgrading to mesa 7..? If so, what should i take into account to not break my system.. :). Thank you very much!
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Sat Aug 11, 2012 1:46 pm    Post subject: Reply with quote

Indeed, it looks like the XAA parameter is ignored. Might be a regression in the radeon driver, you could try an older (or newer) one. Btw, there shouldn't be any need to disable AGP with the non-modesetting driver. As for mesa, downgrading should be save, just mask 8.x. Of course, this is not a solution for the ages, at some point, dependencies on 8.x will appear, but I don't think that you'll run into any issues just yet.
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Sat Aug 18, 2012 12:59 am    Post subject: Reply with quote

Ok, I kept trying things.. but for what I`ve read, there is not even UMS support from mesa 8 to older radeon cards, so, I have to live with no kind of acceleration.. I tried to downgrade mesa 8 to 7, but i have many complains about blocked packages.. And i really need help to try to downgrade mesa (what package should I downgrade before, what problems might i face after downgrading, etc), and that way, see if this works with at least UMS dri support. I keep with my setting "NoAccel true" for X to work. Other way, i get no real colors and no text on boxes and menues, as I showed in my posted pics. Im lost here! Thank you! :)
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Sun Aug 19, 2012 1:58 am    Post subject: Reply with quote

Well, being it weekend, I took the necessary time to play a little with my problem, and i got it solved :). Basically, after some research, I found out that:

- XAA has no more support in newer xorg-server
- From my experience, my card never worked before with EXA, so, there was no reason for it to work now. What i had to do was to find out what version of xorg-server was the last supporting XAA, and i did. So, I downgraded to xorg-server-1.12.2, the last version known to support it.

I also had to downgrade xf86-video-ati too, to a version wich could compile with XAA support, and it was 6.14.4. I had trouble trying to downgrade mesa, because mesa 8.0.3 was blocking eselect-opengl, even I was trying to get mesa-7.11.2... so, i had to downgrade mesa without dependencies (i took the risk :)) with emerge -avO, but nothing bad happened. Mesa compiled perfectly not complaining about anything. Then i faced the typical problem of not having mouse or keyboard support, so i had to use disable autoadddevices, and reemerge xf86-input-keyboard and xf86-input-mouse. After that, i had a totally functional xorg, with XAA and 3d acceleration in perfect conditions :). I just have one more question: all this work involved downgrading packages wich cannot be upgraded if I want to keep 3D acceleration (I know that perhaps, one day, upgrading will be mandatory) but until then, whats the best way to keep this packages away from upgrading? I know I had to mask newer version, but if I update world, newer ebuilds will appear, and I should keep masking then.. and I dont think this is a clean way.. anyway, I hear opinions! I didnt want to make this thread larger than it is, so if anybody face same situation, and wants more direction, just ask, and i`ll be here :). Thanks to everyone who helped me in this thread, i always loved gentoo comunity! To serve: neopablo :).
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Tue Aug 21, 2012 7:30 am    Post subject: Reply with quote

Glad it worked. Masking mesa is more a topic for "Portage & Programming", however, I'd be surprised if you run into any issues with that in the near future. Xorg is more troublesome imho. I don't know about any better way to mask stuff other than successively addings masks to portage.mask. Are you running ppc or ~ppc?
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Thu Aug 23, 2012 10:20 pm    Post subject: Reply with quote

Hi Dirty!! Well, i'll keep masking new versions as soon as sync finish everytime. And i'm using ~ppc :). Thank you!!
_________________
Dont blame me for being curious.. Curiosity led to the biggest discoveries in history! :).. And curiosity brought me to Gentoo.. ;-)
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Fri Aug 24, 2012 1:41 pm    Post subject: Reply with quote

I'm not sure whether you're aware of this, but you can mask all mesa versions > 8 by putting ">=media-libs/mesa-8.0.0" into the mask file. Of course, once packages start to depend on mesa 8+ , you'll start to run into trouble earlier on ~ppc than on ppc ;)
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Sat Aug 25, 2012 8:31 pm    Post subject: Reply with quote

Wowww! I didn't know! But now I do :). Thank you!! And I was thinking... when mesa 8 become necessary... will kms be working with this old card...? :). I don't know if this is a matter of bugs with new way of managing video in kernel... or just a conscious indiference about old cards :P. Its just a rethoric question, hahaha! :)
_________________
Dont blame me for being curious.. Curiosity led to the biggest discoveries in history! :).. And curiosity brought me to Gentoo.. ;-)
Back to top
View user's profile Send private message
DirtyHairy
l33t
l33t


Joined: 03 Jul 2006
Posts: 604
Location: Würzburg, Deutschland

PostPosted: Sun Aug 26, 2012 2:58 pm    Post subject: Reply with quote

I wouldn't cross my fingers for things getting better on the KMS side. From what I found researching the net when I messed around with KMS on mac, I think the trouble is not so much the age of the graphics card, but the simple fact that desktop ppc has become a dying platform. On x86, the driver / card combo would likely work fine, but making it work smoothly on another architecture requires time and a dedicated effort from developers who have the necessary skill and the hardware in question. In addition, from what I read, there are problems with the way AGP is implemented in powermacs, specifically regarding memory conistency, which gallium / radeon KMS were not built to deal with, so AGP via KMS might well never work.

ppc / desktop linux always has been a small community, and with apple's move to x86, it has become a dying species. In a couple of years, I think the most reasonable path is installing a vintage distro or moving on to a more conventional and, let's be honest, much faster x86 based machine :) Just my two cents...
Back to top
View user's profile Send private message
neopablo2000
n00b
n00b


Joined: 21 Jun 2005
Posts: 65

PostPosted: Fri Aug 31, 2012 11:30 am    Post subject: Reply with quote

Haha! Thank you Dirty! :). Yeah, I think I knew in some way PPC would in some moment die. When I heard that PS3 had the same architecture, i only thought: well, that will just add a couple of years to this powerbook :). And I know I shouldn`t worry too much about this, but for me, Linux is kinda God! Allmighty, making things work were others failed, hahaha! But sometimes I forget that behind Linux, there are people working without being paid (mostly) for what they do, and that my powerbook is working today, thanks to that effort. So, im happy that this ppc of mine is still alive, and usefull! And the most important thing: this huge community, widely open to help!. Cheers!! :)
_________________
Dont blame me for being curious.. Curiosity led to the biggest discoveries in history! :).. And curiosity brought me to Gentoo.. ;-)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum