| View previous topic :: View next topic |
| Author |
Message |
xterm
n00b
Joined: 26 May 2012
Posts: 3
|
 Posted: Sat May 26, 2012 5:02 pm Post subject: [SOLVED] sys-libs/glibc-2.14.1-r3 failed (compile phase) |
 |
|
This is my first post, so if this is in the wrong section, or if I should pastebin the code or not, etc. please let me know, I will try to be as helpful as possible seeing as I am requesting help here 
Originally this failed to compile during emerge -uDNav world after first installing gentoo, but most other packages compile just fine (enlightenment overlay, docky, firefox, etc.)
I have also done emerge --depclean and revdep-rebuild, but everytime I do revdep-rebuild (as well as updating world) compilation fails for glibc.
Oh, and this may be a problem, originally my profile was set to hardened with selinux, and that what I compiled everything with, but it was too much of a pain and I didn't really want it that bad (just toying with it), so I changed my profile to 'default/linux/amd64/10.0/desktop' and thats when I ran emerge -uDNav world.
I am adding the two things it suggested to add below, if you need the complete build log or environment etc. just let me know, thank you for any help 
| Code: | ERROR: compile
ERROR: sys-libs/glibc-2.14.1-r3 failed (compile phase):
make for x86 failed
Call stack:
ebuild.sh, line 85: Called src_compile
environment, line 3303: Called eblit-run 'src_compile'
environment, line 841: Called eblit-glibc-src_compile
src_compile.eblit, line 211: Called src_compile
environment, line 3303: Called eblit-run 'src_compile'
environment, line 841: Called eblit-glibc-src_compile
src_compile.eblit, line 219: Called toolchain-glibc_src_compile
src_compile.eblit, line 130: Called die
The specific snippet of code:
emake || die "make for ${ABI} failed"
If you need support, post the output of 'emerge --info =sys-libs/glibc-2.14.1-r3',
the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.14.1-r3'.
The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'.
The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment'.
S: '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/glibc-2.14.1' |
| Code: | emerge --info =sys-libs/glibc-2.14.1-r3
Portage 2.1.10.49 (default/linux/amd64/10.0/desktop, gcc-4.5.3, glibc-2.14.1-r3, 3.2.12-gentoo x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-3.2.12-gentoo-x86_64-Genuine_Intel-R-_CPU_575_@_2.00GHz-with-gentoo-2.1
Timestamp of tree: Sat, 26 May 2012 14:45:01 +0000
app-shells/bash: 4.2_p20
dev-java/java-config: 2.1.11-r3
dev-lang/python: 2.7.3-r1, 3.2.3
dev-util/cmake: 2.8.7-r5
dev-util/pkgconfig: 0.26
sys-apps/baselayout: 2.1-r1
sys-apps/openrc: 0.9.8.4
sys-apps/sandbox: 2.5
sys-devel/autoconf: 2.13, 2.68
sys-devel/automake: 1.10.3, 1.11.1
sys-devel/binutils: 2.21.1-r1
sys-devel/gcc: 4.5.3-r2
sys-devel/gcc-config: 1.5-r2
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc: 2.14.1-r3
Repositories: gentoo enlightenment
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks ebuild-locks fixlafiles news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="ftp://ftp.ussg.iu.edu/pub/linux/gentoo http://lug.mtu.edu/gentoo/ ftp://lug.mtu.edu/gentoo/ http://gentoo.osuosl.org/"
LANG="en_US.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/var/lib/layman/enlightenment"
SYNC="rsync://rsync.us.gentoo.org/gentoo-portage"
USE="X a52 aac acl acpi alsa amd64 apm berkdb bluetooth branding bzip2 cairo cdda cdr cli consolekit cracklib crypt cups curl cxx dbus dri dts dvd dvdr emboss encode exif fam firefox flac fortran gdbm gif gpm gtk iconv intel ipv6 jpeg lcms ldap libnotify lm_sensors mad mmx mng modules mp3 mp4 mpeg mudflap multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds pppd python qt3support qt4 readline sasl sdl session sna spell sse sse2 ssl startup-notification svg tcpd threads tiff truetype udev udisks unicode upower usb vorbis wxwidgets x264 xcb xcomposite xinerama xml xorg xrandr xulrunner xv xvid zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev keyboard synaptics mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" PHP_TARGETS="php5-3" PYTHON_TARGETS="python3_2 python2_7" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" VIDEO_CARDS="intel" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
=================================================================
Package Settings
=================================================================
sys-libs/glibc-2.14.1-r3 was built with the following:
USE="(hardened) (multilib) (selinux) -debug -gd -profile -vanilla"
CFLAGS="-march=native -pipe -O2 -fno-strict-aliasing"
CXXFLAGS="-march=native -pipe -O2 -fno-strict-aliasing" |
| Code: | emerge -pqv =sys-libs/glibc-2.14.1-r3
[ebuild R ] sys-libs/glibc-2.14.1-r3 USE="(multilib) -debug -gd (-hardened*) -profile (-selinux*) -vanilla" |
Last edited by xterm on Wed May 30, 2012 3:32 am; edited 1 time in total |
|
| Back to top |
|
 |
popsUlfr
Tux's lil' helper
Joined: 27 Feb 2011
Posts: 80
|
| Posted: Sat May 26, 2012 7:37 pm Post subject: Re: sys-libs/glibc-2.14.1-r3 failed (compile phase) |
|
|
| xterm wrote: | | This is my first post, so if this is in the wrong section, or if I should pastebin the code or not, etc. please let me know, I will try to be as helpful as possible seeing as I am requesting help here |
Welcome to the wonderful gentoo forums ! We're all in this together, users helping each other <- that's what this is all about!
| xterm wrote: |
I am adding the two things it suggested to add below, if you need the complete build log or environment etc. just let me know, thank you for any help
|
Please pastebin the build.log. To determine what the trouble is, we'll first need to see the error. Switching from hardened profile to a "normal" one is no trivial task, I think it would actually be easier to start from scratch with a stage3. You'd need to re-emerge your whole world, actually the safest would be:
| Code: | emerge -e system
emerge -e world |
To make sure your base toolchain isn't hardened anymore. There's a high chance your issue is related to that. |
|
| Back to top |
|
|
xterm
n00b
Joined: 26 May 2012
Posts: 3
|
| Posted: Sat May 26, 2012 7:42 pm Post subject: |
|
|
| Alright, if it is that much of a pain then I will just emerge -e system and emerge -e world, if that doesn't work out then I will just redo from stage 3, thanks for the advice! I will post how it all turns out. |
|
| Back to top |
|
|
xterm
n00b
Joined: 26 May 2012
Posts: 3
|
| Posted: Wed May 30, 2012 3:26 am Post subject: Solved? |
|
|
| Well after a long process of emerge -e system, glibc failed to compile (which took forever to get to on my old celeron laptop). So I just reinstalled from a stage 3, kind of glad I did because I figured I would try another minimal wm/de. This turned out to be awesome, which is pretty awesome, despite me still learning how to customize it. I have a lot of it down, just need to install wicked, which I believe is in an overlay...which I find annoying...but oh well, thanks for all the help! |
|
| Back to top |
|
|
Bigun
Veteran
Joined: 21 Sep 2003
Posts: 1949
|
| Posted: Thu Jun 07, 2012 6:10 pm Post subject: |
|
|
I'm having a very close to the same problem as well.
revdep-rebuild shows no broken libraries, and I have plenty of space.
| Code: | >>> Failed to emerge sys-libs/glibc-2.14.1-r3, Log file:
>>> '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'
* Messages for package sys-libs/glibc-2.14.1-r3:
* ERROR: sys-libs/glibc-2.14.1-r3 failed (compile phase):
* make for default failed
*
* Call stack:
* ebuild.sh, line 85: Called src_compile
* environment, line 3345: Called eblit-run 'src_compile'
* environment, line 831: Called eblit-glibc-src_compile
* src_compile.eblit, line 219: Called toolchain-glibc_src_compile
* src_compile.eblit, line 130: Called die
* The specific snippet of code:
* emake || die "make for ${ABI} failed"
*
* If you need support, post the output of 'emerge --info =sys-libs/glibc-2.14.1-r3',
* the complete build log and the output of 'emerge -pqv =sys-libs/glibc-2.14.1-r3'.
* The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/temp/environment'.
* S: '/var/tmp/portage/sys-libs/glibc-2.14.1-r3/work/glibc-2.14.1'
|
emerge --info
| Code: | Portage 2.1.10.49 (default/linux/x86/10.0, gcc-4.5.3, glibc-2.13-r4, 3.2.1-gentoo-r2 i686)
=================================================================
System uname: Linux-3.2.1-gentoo-r2-i686-AMD_Athlon-tm-_XP_1800+-with-gentoo-2.0.3
Timestamp of tree: Thu, 07 Jun 2012 16:30:01 +0000
app-shells/bash: 4.2_p20
dev-lang/python: 2.6.6-r2, 3.2.2
dev-util/pkgconfig: 0.26
sys-apps/baselayout: 2.0.3
sys-apps/openrc: 0.9.8.4
sys-apps/sandbox: 2.5
sys-devel/autoconf: 2.68
sys-devel/automake: 1.11.1
sys-devel/binutils: 2.21.1-r1
sys-devel/gcc: 4.5.3-r2
sys-devel/gcc-config: 1.5-r2
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc: 2.13-r4
Repositories: gentoo
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=athlon-xp -O2 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks ebuild-locks fixlafiles news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="acl berkdb bzip2 cli cracklib crypt css cxx dvd dvdnav dvdr dvdread fat fortran gdbm gpm grub iconv modules mudflap ncurses nls nptl openmp pam pcre pppd readline rss session ssl szip tcpd unicode usb x86 xfs zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" PHP_TARGETS="php5-3" PYTHON_TARGETS="python3_2 python2_7" RUBY_TARGETS="ruby18 ruby19" USERLAND="GNU" VIDEO_CARDS="via" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
|
_________________
Sadhu Sundar Singh - responding to Darwinian Evolution - "...but I am more interested in Divine Selection and survival of the unfit" |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Portage & Programming
