| View previous topic :: View next topic |
| Author |
Message |
vrghost
n00b
Joined: 03 Oct 2003
Posts: 25
Location: London
|
 Posted: Wed May 02, 2012 7:00 am Post subject: Xorg with HD6850 - No DRI or DRI2. fglrx No Matching device |
 |
|
Have been struggling with this one for a while now, and I just don't seem to be able to resolve it. Have followed a number of walkthroughs and other bits, and think I may be at that situation where, due to the different walkthroughs, I may have turned off too much, or on too much in the kernel.
The Graphics card in question is a "PowerColor ATI Fanless HD6850 SCS3 1GB", and could not find many comments about people having problems with it.
One of my questions is also, does anyone know the answer to these three questions:
1. Is it the kernel that creates the DRI
2. If so, is it created at boot or when requested (there is no /dev/dri or /dev/dri2 device on the box)
3. Does fglrx require DRI or is it a replacement
4. Is there a seperate DRI module that can be compiles.
Config files in the end after the logfiles:
Xorg command line output:
| Code: |
xauth: file /home/vrghost/.serverauth.10909 does not exist
X.Org X Server 1.11.2
Release Date: 2011-11-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
Current Operating System: Linux visorghost 3.2.12-gentoo #5 SMP Wed Apr 4 10:29:53 BST 2012 x86_64
Kernel command line: root=/dev/ram0 real_root=/dev/sda5 pcie_aspm=force dolvm domdadm
Build Date: 04 April 2012 10:36:40AM
Current version of pixman: 0.24.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 4 13:15:18 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "dri" (module does not exist, 0)
(EE) Failed to load module "dri2" (module does not exist, 0)
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
/etc/X11/xinit/xinitrc: line 59: twm: command not found
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
/etc/X11/xinit/xinitrc: line 61: xterm: command not found
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 62: xterm: command not found
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file. |
lspci output:
| Code: | 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts PRO [ATI Radeon HD 6800 Series]
02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Barts HDMI Audio [Radeon HD 6800 Series]
04:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
05:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
06:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
07:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)
|
Xorg.0.log:
| Code: | [ 64853.949]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 64853.949] X Protocol Version 11, Revision 0
[ 64853.949] Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
[ 64853.949] Current Operating System: Linux visorghost 3.2.12-gentoo #8 SMP Thu Apr 26 17:01:26 BST 2012 x86_64
[ 64853.949] Kernel command line: root=/dev/ram0 real_root=/dev/sda5 pcie_aspm=force dolvm domdadm radeon.modeset=1 video=radeondrmfb:1400x1050-24@75
[ 64853.950] Build Date: 04 April 2012 10:36:40AM
[ 64853.950]
[ 64853.950] Current version of pixman: 0.24.0
[ 64853.950] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 64853.951] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 64853.952] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:04:20 2012
[ 64853.952] (==) Using config file: "/etc/X11/xorg.conf"
[ 64853.952] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 64853.952] (==) ServerLayout "aticonfig Layout"
[ 64853.952] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 64853.952] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 64853.952] (**) | |-->Device "aticonfig-Device[0]-0"
[ 64853.952] (**) |-->Screen "aticonfig-Screen[0]-1" (1)
[ 64853.952] (**) | |-->Monitor "aticonfig-Monitor[0]-1"
[ 64853.952] (**) | |-->Device "aticonfig-Device[0]-1"
[ 64853.952] (==) Automatically adding devices
[ 64853.952] (==) Automatically enabling devices
[ 64853.952] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 64853.952] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 64853.952] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 64853.952] (II) Loader magic: 0x7ceac0
[ 64853.952] (II) Module ABI versions:
[ 64853.952] X.Org ANSI C Emulation: 0.4
[ 64853.952] X.Org Video Driver: 11.0
[ 64853.952] X.Org XInput driver : 13.0
[ 64853.952] X.Org Server Extension : 6.0
[ 64853.953] (--) PCI:*(0:2:0:0) 1002:6739:1787:2304 rev 0, Mem @ 0xe0000000/268435456, 0xfbbc0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 64853.953] (II) "extmod" will be loaded by default.
[ 64853.953] (II) "dbe" will be loaded by default.
[ 64853.953] (II) "glx" will be loaded by default.
[ 64853.953] (II) "record" will be loaded by default.
[ 64853.953] (II) "dri" will be loaded by default.
[ 64853.953] (II) "dri2" will be loaded by default.
[ 64853.953] (II) LoadModule: "extmod"
[ 64853.953] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 64853.953] (II) Module extmod: vendor="X.Org Foundation"
[ 64853.953] compiled for 1.11.2, module version = 1.0.0
[ 64853.953] Module class: X.Org Server Extension
[ 64853.953] ABI class: X.Org Server Extension, version 6.0
[ 64853.953] (II) Loading extension MIT-SCREEN-SAVER
[ 64853.953] (II) Loading extension XFree86-VidModeExtension
[ 64853.953] (II) Loading extension XFree86-DGA
[ 64853.953] (II) Loading extension DPMS
[ 64853.953] (II) Loading extension XVideo
[ 64853.953] (II) Loading extension XVideo-MotionCompensation
[ 64853.953] (II) Loading extension X-Resource
[ 64853.953] (II) LoadModule: "dbe"
[ 64853.953] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 64853.953] (II) Module dbe: vendor="X.Org Foundation"
[ 64853.953] compiled for 1.11.2, module version = 1.0.0
[ 64853.953] Module class: X.Org Server Extension
[ 64853.954] ABI class: X.Org Server Extension, version 6.0
[ 64853.954] (II) Loading extension DOUBLE-BUFFER
[ 64853.954] (II) LoadModule: "glx"
[ 64853.954] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 64853.954] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 64853.954] compiled for 6.9.0, module version = 1.0.0
[ 64853.954] (II) Loading extension GLX
[ 64853.954] (II) LoadModule: "record"
[ 64853.954] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 64853.954] (II) Module record: vendor="X.Org Foundation"
[ 64853.954] compiled for 1.11.2, module version = 1.13.0
[ 64853.954] Module class: X.Org Server Extension
[ 64853.954] ABI class: X.Org Server Extension, version 6.0
[ 64853.954] (II) Loading extension RECORD
[ 64853.954] (II) LoadModule: "dri"
[ 64853.954] (WW) Warning, couldn't open module dri
[ 64853.954] (II) UnloadModule: "dri"
[ 64853.954] (II) Unloading dri
[ 64853.954] (EE) Failed to load module "dri" (module does not exist, 0)
[ 64853.954] (II) LoadModule: "dri2"
[ 64853.954] (WW) Warning, couldn't open module dri2
[ 64853.954] (II) UnloadModule: "dri2"
[ 64853.954] (II) Unloading dri2
[ 64853.954] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 64853.955] (II) LoadModule: "fglrx"
[ 64853.955] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 64853.963] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 64853.963] compiled for 1.4.99.906, module version = 8.95.3
[ 64853.963] Module class: X.Org Video Driver
[ 64853.963] (II) Loading sub module "fglrxdrm"
[ 64853.963] (II) LoadModule: "fglrxdrm"
[ 64853.963] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 64853.963] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 64853.963] compiled for 1.4.99.906, module version = 8.95.3
[ 64853.963] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[ 64853.963] (II) ATI Proprietary Linux Driver Release Identifier: 8.95
[ 64853.963] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:05:02
[ 64853.963] (--) using VT number 7
[ 64853.972] (WW) Falling back to old probe method for fglrx
[ 64853.975] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 64853.975] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 64853.975] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 64853.976] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 64853.977] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 64853.977] (II) AMD Video driver is signed
[ 64853.977] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 64853.977] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 64853.977] (II) fglrx(0): pEnt->device->identifier=0x7fe040
[ 64853.977] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 64853.977] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 64853.977] (II) fglrx(1): pEnt->device->identifier=0x7fe040
[ 64853.977] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 64853.977] (II) Loading sub module "vgahw"
[ 64853.977] (II) LoadModule: "vgahw"
[ 64853.977] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 64853.977] (II) Module vgahw: vendor="X.Org Foundation"
[ 64853.977] compiled for 1.11.2, module version = 0.1.0
[ 64853.977] ABI class: X.Org Video Driver, version 11.0
[ 64853.977] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 64853.977] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 64853.977] (==) fglrx(0): Default visual is TrueColor
[ 64853.977] (**) fglrx(0): Option "UseFastTLS" "0"
[ 64853.977] (**) fglrx(0): Option "DPMS" "true"
[ 64853.977] (==) fglrx(0): RGB weight 888
[ 64853.977] (II) fglrx(0): Using 8 bits per RGB
[ 64853.977] (==) fglrx(0): Buffer Tiling is ON
[ 64853.977] (II) Loading sub module "fglrxdrm"
[ 64853.977] (II) LoadModule: "fglrxdrm"
[ 64853.977] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 64853.977] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 64853.977] compiled for 1.4.99.906, module version = 8.95.3
[ 64853.978] ukiDynamicMajor: found major device number 246
[ 64853.978] ukiDynamicMajor: found major device number 246
[ 64853.978] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 64853.978] ukiOpenDevice: node name is /dev/ati/card0
[ 64853.978] ukiOpenDevice: open result is 12, (OK)
[ 64853.978] ukiOpenByBusid: ukiOpenMinor returns 12
[ 64853.978] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 64853.978] (**) fglrx(0): NoAccel = NO
[ 64853.978] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 64853.978] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739)
[ 64853.978] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2304)
[ 64853.978] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 64853.978] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 64853.978] (--) fglrx(0): MMIO registers at 0xfbbc0000
[ 64853.978] (--) fglrx(0): I/O port at 0x0000ce00
[ 64853.978] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 64853.979] (II) fglrx(0): AC Adapter is used
[ 64853.983] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 64854.151] (II) Loading sub module "vbe"
[ 64854.151] (II) LoadModule: "vbe"
[ 64854.151] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 64854.151] (II) Module vbe: vendor="X.Org Foundation"
[ 64854.151] compiled for 1.11.2, module version = 1.1.0
[ 64854.151] ABI class: X.Org Video Driver, version 11.0
[ 64854.151] (II) fglrx(0): VESA BIOS detected
[ 64854.151] (II) fglrx(0): VESA VBE Version 3.0
[ 64854.151] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 64854.151] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 64854.151] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 64854.151] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 64854.151] (II) fglrx(0): VESA VBE OEM Product: BARTS
[ 64854.151] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 64854.181] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 64854.181] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 64854.181] (II) fglrx(0): PCIE card detected
[ 64854.181] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 64854.181] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 64854.185] (II) fglrx(0): Using adapter: 2:0.0.
[ 64854.314] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 64854.464] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[ 64854.464] (II) fglrx(0): RandR 1.2 support is enabled!
[ 64854.464] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 64854.464] (==) fglrx(0): Center Mode is disabled
[ 64854.464] (II) Loading sub module "fb"
[ 64854.464] (II) LoadModule: "fb"
[ 64854.464] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 64854.464] (II) Module fb: vendor="X.Org Foundation"
[ 64854.464] compiled for 1.11.2, module version = 1.0.0
[ 64854.464] ABI class: X.Org ANSI C Emulation, version 0.4
[ 64854.464] (II) Loading sub module "ddc"
[ 64854.464] (II) LoadModule: "ddc"
[ 64854.464] (II) Module "ddc" already built-in
[ 64854.615] (II) fglrx(0): Finished Initialize PPLIB!
[ 64854.616] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 64854.616] (II) fglrx(0): Output DFP2 has no monitor section
[ 64854.616] (II) fglrx(0): Output DFP3 has no monitor section
[ 64854.616] (II) fglrx(0): Output DFP4 has no monitor section
[ 64854.616] (II) fglrx(0): Output DFP5 has no monitor section
[ 64854.616] (II) fglrx(0): Output DFP6 has no monitor section
[ 64854.616] (II) fglrx(0): Output DFP7 has no monitor section
[ 64854.616] (II) fglrx(0): Output CRT1 has no monitor section
[ 64854.616] (II) Loading sub module "ddc"
[ 64854.616] (II) LoadModule: "ddc"
[ 64854.616] (II) Module "ddc" already built-in
[ 64854.616] (II) fglrx(0): Connected Display0: DFP7
[ 64854.616] (II) fglrx(0): Display0 EDID data ---------------------------
[ 64854.616] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 64854.616] (II) fglrx(0): Year: 2006 Week: 12
[ 64854.616] (II) fglrx(0): EDID Version: 1.3
[ 64854.616] (II) fglrx(0): Digital Display Input
[ 64854.616] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 64854.616] (II) fglrx(0): Gamma: 2.20
[ 64854.616] (II) fglrx(0): DPMS capabilities: Off
[ 64854.616] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 64854.616] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 64854.616] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 64854.616] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 64854.616] (II) fglrx(0): Manufacturer's mask: 0
[ 64854.616] (II) fglrx(0): Supported detailed timing:
[ 64854.616] (II) fglrx(0): clock: 71.0 MHz Image Size: 646 x 406 mm
[ 64854.616] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 64854.616] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 64854.616] (II) fglrx(0): Supported detailed timing:
[ 64854.616] (II) fglrx(0): clock: 268.0 MHz Image Size: 646 x 406 mm
[ 64854.616] (II) fglrx(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 64854.616] (II) fglrx(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 64854.616] (II) fglrx(0): Monitor name: DELL 3007WFP
[ 64854.616] (II) fglrx(0): Serial No: 0XD31063HG06H
[ 64854.616] (II) fglrx(0): EDID (in hex):
[ 64854.616] (II) fglrx(0): 00ffffffffffff0010ac164047303648
[ 64854.616] (II) fglrx(0): 0c1001038040287828fe87a3574a9c25
[ 64854.616] (II) fglrx(0): 13505400000001010101010101010101
[ 64854.616] (II) fglrx(0): 010101010101bc1b00a0502017303020
[ 64854.616] (II) fglrx(0): 360086962100001ab06800a0a0402e60
[ 64854.616] (II) fglrx(0): 3020360086962100001e000000fc0044
[ 64854.616] (II) fglrx(0): 454c4c20333030375746500a000000ff
[ 64854.616] (II) fglrx(0): 003058443331303633484730364800f1
[ 64854.616] (II) fglrx(0): End of Display0 EDID data --------------------
[ 64854.617] (II) fglrx(0): EDID for output DFP1
[ 64854.617] (II) fglrx(0): EDID for output DFP2
[ 64854.617] (II) fglrx(0): EDID for output DFP3
[ 64854.617] (II) fglrx(0): EDID for output DFP4
[ 64854.617] (II) fglrx(0): EDID for output DFP5
[ 64854.617] (II) fglrx(0): EDID for output DFP6
[ 64854.617] (II) fglrx(0): EDID for output DFP7
[ 64854.617] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 64854.617] (II) fglrx(0): Year: 2006 Week: 12
[ 64854.617] (II) fglrx(0): EDID Version: 1.3
[ 64854.617] (II) fglrx(0): Digital Display Input
[ 64854.617] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 64854.617] (II) fglrx(0): Gamma: 2.20
[ 64854.617] (II) fglrx(0): DPMS capabilities: Off
[ 64854.617] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 64854.617] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 64854.617] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 64854.617] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 64854.617] (II) fglrx(0): Manufacturer's mask: 0
[ 64854.617] (II) fglrx(0): Supported detailed timing:
[ 64854.617] (II) fglrx(0): clock: 71.0 MHz Image Size: 646 x 406 mm
[ 64854.617] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 64854.617] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 64854.617] (II) fglrx(0): Supported detailed timing:
[ 64854.617] (II) fglrx(0): clock: 268.0 MHz Image Size: 646 x 406 mm
[ 64854.617] (II) fglrx(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 64854.617] (II) fglrx(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 64854.617] (II) fglrx(0): Monitor name: DELL 3007WFP
[ 64854.617] (II) fglrx(0): Serial No: 0XD31063HG06H
[ 64854.617] (II) fglrx(0): EDID (in hex):
[ 64854.617] (II) fglrx(0): 00ffffffffffff0010ac164047303648
[ 64854.617] (II) fglrx(0): 0c1001038040287828fe87a3574a9c25
[ 64854.617] (II) fglrx(0): 13505400000001010101010101010101
[ 64854.617] (II) fglrx(0): 010101010101bc1b00a0502017303020
[ 64854.617] (II) fglrx(0): 360086962100001ab06800a0a0402e60
[ 64854.617] (II) fglrx(0): 3020360086962100001e000000fc0044
[ 64854.617] (II) fglrx(0): 454c4c20333030375746500a000000ff
[ 64854.617] (II) fglrx(0): 003058443331303633484730364800f1
[ 64854.617] (II) fglrx(0): Printing probed modes for output DFP7
[ 64854.617] (II) fglrx(0): Modeline "1280x800"x60.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 64854.617] (II) fglrx(0): Modeline "1280x768"x60.0 71.00 1280 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 64854.617] (II) fglrx(0): Modeline "1280x720"x60.0 71.00 1280 1328 1360 1440 720 803 809 823 +hsync -vsync (49.3 kHz)
[ 64854.617] (II) fglrx(0): Modeline "1024x768"x60.0 71.00 1024 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 64854.617] (II) fglrx(0): Modeline "800x600"x60.0 71.00 800 1328 1360 1440 600 803 809 823 +hsync -vsync (49.3 kHz)
[ 64854.617] (II) fglrx(0): Modeline "640x480"x60.0 71.00 640 1328 1360 1440 480 803 809 823 +hsync -vsync (49.3 kHz)
[ 64854.617] (II) fglrx(0): EDID for output CRT1
[ 64854.617] (II) fglrx(0): Output DFP1 disconnected
[ 64854.617] (II) fglrx(0): Output DFP2 disconnected
[ 64854.617] (II) fglrx(0): Output DFP3 disconnected
[ 64854.617] (II) fglrx(0): Output DFP4 disconnected
[ 64854.617] (II) fglrx(0): Output DFP5 disconnected
[ 64854.617] (II) fglrx(0): Output DFP6 disconnected
[ 64854.617] (II) fglrx(0): Output DFP7 connected
[ 64854.617] (II) fglrx(0): Output CRT1 disconnected
[ 64854.617] (II) fglrx(0): Using exact sizes for initial modes
[ 64854.617] (II) fglrx(0): Output DFP7 using initial mode 1280x800
[ 64854.617] (II) fglrx(0): DPI set to (96, 96)
[ 64854.617] (II) fglrx(0): Eyefinity capable adapter detected.
[ 64854.617] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected.
[ 64854.617] (==) fglrx(0): PseudoColor visuals disabled
[ 64854.617] (II) Loading sub module "ramdac"
[ 64854.617] (II) LoadModule: "ramdac"
[ 64854.617] (II) Module "ramdac" already built-in
[ 64854.617] (==) fglrx(0): NoDRI = NO
[ 64854.617] (==) fglrx(0): Capabilities: 0x00000000
[ 64854.617] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 64854.617] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 64854.617] (**) fglrx(0): UseFastTLS=0
[ 64854.617] (==) fglrx(0): BlockSignalsOnLock=1
[ 64854.617] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === begin
[ 64854.617] (WW) fglrx(1): Quitting screen 1 -- no monitor specified.
[ 64854.617] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === end
[ 64854.617] (II) UnloadModule: "fglrx"
[ 64854.617] (II) Unloading fglrx
[ 64854.617] (II) UnloadModule: "fglrxdrm"
[ 64854.617] (II) Unloading fglrxdrm
[ 64854.617] (--) Depth 24 pixmap format is 32 bpp
[ 64854.617] (II) Loading extension ATIFGLRXDRI
[ 64854.617] (II) fglrx(0): doing swlDriScreenInit
[ 64854.617] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 64854.617] ukiDynamicMajor: found major device number 246
[ 64854.617] ukiDynamicMajor: found major device number 246
[ 64854.617] ukiDynamicMajor: found major device number 246
[ 64854.617] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 64854.617] ukiOpenDevice: node name is /dev/ati/card0
[ 64854.617] ukiOpenDevice: open result is 17, (OK)
[ 64854.617] ukiOpenByBusid: ukiOpenMinor returns 17
[ 64854.617] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 64854.617] (II) fglrx(0): [uki] DRM interface version 1.0
[ 64854.617] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 64854.617] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x62000
[ 64854.617] (II) fglrx(0): [uki] mapped SAREA 0x62000 to 0x7f6e7b074000
[ 64854.617] (II) fglrx(0): [uki] framebuffer handle = 0x63000
[ 64854.617] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 64854.617] (II) fglrx(0): swlDriScreenInit done
[ 64854.617] (II) fglrx(0): Kernel Module Version Information:
[ 64854.617] (II) fglrx(0): Name: fglrx
[ 64854.617] (II) fglrx(0): Version: 8.95.3
[ 64854.617] (II) fglrx(0): Date: Feb 14 2012
[ 64854.617] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 64854.617] (II) fglrx(0): Kernel Module version matches driver.
[ 64854.617] (II) fglrx(0): Kernel Module Build Time Information:
[ 64854.617] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.12-gentoo
[ 64854.617] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 64854.617] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 64854.617] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 64854.617] (II) fglrx(0): [uki] register handle = 0x00064000
[ 64854.628] (II) fglrx(0): DRI initialization successfull
[ 64854.628] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
[ 64854.628] (==) fglrx(0): Backing store disabled
[ 64854.628] (II) Loading extension FGLRXEXTENSION
[ 64854.628] (**) fglrx(0): DPMS enabled
[ 64854.628] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 64854.628] (**) fglrx(0): Textured Video is enabled.
[ 64854.628] (II) LoadModule: "glesx"
[ 64854.628] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 64854.629] (II) Module glesx: vendor="X.Org Foundation"
[ 64854.629] compiled for 1.4.99.906, module version = 1.0.0
[ 64854.629] (II) Loading extension GLESX
[ 64854.629] (II) fglrx(0): GLESX enableFlags = 592
[ 64854.629] (II) fglrx(0): GLESX is enabled
[ 64854.629] (II) LoadModule: "amdxmm"
[ 64854.629] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 64854.629] (II) Module amdxmm: vendor="X.Org Foundation"
[ 64854.629] compiled for 1.4.99.906, module version = 2.0.0
[ 64854.641] (II) Loading extension AMDXVOPL
[ 64854.641] (II) Loading extension AMDXVBA
[ 64854.641] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 64854.642] (II) fglrx(0): Enable composite support successfully
[ 64854.642] (WW) fglrx(0): Option "VendorName" is not used
[ 64854.642] (WW) fglrx(0): Option "ModelName" is not used
[ 64854.642] (II) fglrx(0): X context handle = 0x1
[ 64854.642] (II) fglrx(0): [DRI] installation complete
[ 64854.642] (==) fglrx(0): Silken mouse enabled
[ 64854.642] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 64854.643] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 64854.722] (--) RandR disabled
[ 64854.722] (II) Initializing built-in extension Generic Event Extension
[ 64854.722] (II) Initializing built-in extension SHAPE
[ 64854.722] (II) Initializing built-in extension MIT-SHM
[ 64854.722] (II) Initializing built-in extension XInputExtension
[ 64854.722] (II) Initializing built-in extension XTEST
[ 64854.722] (II) Initializing built-in extension BIG-REQUESTS
[ 64854.722] (II) Initializing built-in extension SYNC
[ 64854.722] (II) Initializing built-in extension XKEYBOARD
[ 64854.722] (II) Initializing built-in extension XC-MISC
[ 64854.722] (II) Initializing built-in extension XINERAMA
[ 64854.722] (II) Initializing built-in extension XFIXES
[ 64854.722] (II) Initializing built-in extension RENDER
[ 64854.722] (II) Initializing built-in extension RANDR
[ 64854.722] (II) Initializing built-in extension COMPOSITE
[ 64854.722] (II) Initializing built-in extension DAMAGE
[ 64854.723] ukiDynamicMajor: found major device number 246
[ 64854.723] ukiDynamicMajor: found major device number 246
[ 64854.723] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 64854.723] ukiOpenDevice: node name is /dev/ati/card0
[ 64854.723] ukiOpenDevice: open result is 18, (OK)
[ 64854.723] ukiOpenByBusid: ukiOpenMinor returns 18
[ 64854.723] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 64854.766] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 64854.773] (II) fglrx(0): Enable the clock gating!
[ 64854.773] (II) fglrx(0): Setting screen physical size to 338 x 211
[ 64854.814] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 64854.814] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 64854.814] (II) LoadModule: "evdev"
[ 64854.814] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 64854.814] (II) Module evdev: vendor="X.Org Foundation"
[ 64854.814] compiled for 1.11.2, module version = 2.6.0
[ 64854.814] Module class: X.Org XInput Driver
[ 64854.814] ABI class: X.Org XInput driver, version 13.0
[ 64854.814] (II) Using input driver 'evdev' for 'Power Button'
[ 64854.814] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 64854.814] (**) Power Button: always reports core events
[ 64854.814] (**) Power Button: Device: "/dev/input/event3"
[ 64854.814] (--) Power Button: Found keys
[ 64854.814] (II) Power Button: Configuring as keyboard
[ 64854.814] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 64854.814] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 64854.814] (**) Option "xkb_rules" "evdev"
[ 64854.814] (**) Option "xkb_model" "evdev"
[ 64854.814] (**) Option "xkb_layout" "us"
[ 64854.827] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 64854.827] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 64854.827] (II) Using input driver 'evdev' for 'Power Button'
[ 64854.827] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 64854.827] (**) Power Button: always reports core events
[ 64854.827] (**) Power Button: Device: "/dev/input/event2"
[ 64854.827] (--) Power Button: Found keys
[ 64854.827] (II) Power Button: Configuring as keyboard
[ 64854.827] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 64854.827] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 64854.827] (**) Option "xkb_rules" "evdev"
[ 64854.827] (**) Option "xkb_model" "evdev"
[ 64854.827] (**) Option "xkb_layout" "us"
[ 64854.827] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 64854.827] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 64854.827] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 64854.827] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 64854.827] (**) Logitech USB Receiver: always reports core events
[ 64854.827] (**) Logitech USB Receiver: Device: "/dev/input/event0"
[ 64854.827] (--) Logitech USB Receiver: Found keys
[ 64854.827] (II) Logitech USB Receiver: Configuring as keyboard
[ 64854.827] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input0/event0"
[ 64854.827] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 64854.827] (**) Option "xkb_rules" "evdev"
[ 64854.827] (**) Option "xkb_model" "evdev"
[ 64854.827] (**) Option "xkb_layout" "us"
[ 64854.828] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 64854.828] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 64854.828] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 64854.828] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 64854.828] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 64854.828] (**) Logitech USB Receiver: always reports core events
[ 64854.828] (**) Logitech USB Receiver: Device: "/dev/input/event1"
[ 64854.828] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 64854.828] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 64854.828] (--) Logitech USB Receiver: Found relative axes
[ 64854.828] (--) Logitech USB Receiver: Found x and y relative axes
[ 64854.828] (--) Logitech USB Receiver: Found keys
[ 64854.828] (II) Logitech USB Receiver: Configuring as mouse
[ 64854.828] (II) Logitech USB Receiver: Configuring as keyboard
[ 64854.828] (II) Logitech USB Receiver: Adding scrollwheel support
[ 64854.828] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 64854.828] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 64854.828] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input1/event1"
[ 64854.828] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 64854.828] (**) Option "xkb_rules" "evdev"
[ 64854.828] (**) Option "xkb_model" "evdev"
[ 64854.828] (**) Option "xkb_layout" "us"
[ 64854.828] (II) Logitech USB Receiver: initialized for relative axes.
[ 64854.828] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 64854.828] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 64854.828] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 64854.828] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 64854.828] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 64854.828] (II) No input driver/identifier specified (ignoring)
[ 64854.828] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 64854.828] (II) No input driver/identifier specified (ignoring)
[ 64854.830] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 64855.040] (II) Power Button: Close
[ 64855.040] (II) UnloadModule: "evdev"
[ 64855.040] (II) Unloading evdev
[ 64855.360] (II) Power Button: Close
[ 64855.360] (II) UnloadModule: "evdev"
[ 64855.360] (II) Unloading evdev
[ 64855.690] (II) Logitech USB Receiver: Close
[ 64855.690] (II) UnloadModule: "evdev"
[ 64855.690] (II) Unloading evdev
[ 64856.000] (II) Logitech USB Receiver: Close
[ 64856.000] (II) UnloadModule: "evdev"
[ 64856.000] (II) Unloading evdev
[ 64856.001] (II) fglrx(0): Shutdown CMMQS
[ 64856.001] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 64856.001] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x62000 at 0x7f6e7b074000
[ 64856.060] (II) fglrx(0): Interrupt handler Shutdown.
[ 64856.215] Server terminated successfully (0). Closing log file.
|
And now for the settings:
xorg.conf
| Code: | Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "UseFastTLS" "0"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
BusID "PCI:2:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
Kernel .config
[code:1:0b3b04c275]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.2.12-gentoo Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="visorghost"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ |
|
| Back to top |
|
 |
Jaglover
Advocate
Joined: 29 May 2005
Posts: 3974
Location: Saint Amant, Acadiana
|
|
| Back to top |
|
|
vrghost
n00b
Joined: 03 Oct 2003
Posts: 25
Location: London
|
| Posted: Wed May 02, 2012 2:48 pm Post subject: |
|
|
Think I found part of the problem thanks to that e-mail. Think the problem lay in my having set the DRM to built in rather than Module.
Now I have a second issue, but I can not for the life of me figure out why there is an issue, it seems like its all happy to start, but just decides that it is not worth it...
This is what happens when I run it under root.
Xorg.0.log
| Code: |
[ 2390.692]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 2390.692] X Protocol Version 11, Revision 0
[ 2390.692] Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
[ 2390.692] Current Operating System: Linux visorghost 3.2.12-gentoo #11 SMP Wed May 2 12:29:53 BST 2012 x86_64
[ 2390.692] Kernel command line: root=/dev/ram0 real_root=/dev/sda5 pcie_aspm=force dolvm domdadm radeon.modeset=1 video=radeondrmfb:1400x1050-24@75
[ 2390.693] Build Date: 02 May 2012 12:11:14PM
[ 2390.693]
[ 2390.693] Current version of pixman: 0.24.0
[ 2390.693] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2390.693] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2390.693] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 15:32:13 2012
[ 2390.694] (==) Using config file: "/etc/X11/xorg.conf"
[ 2390.694] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2390.695] (==) ServerLayout "aticonfig Layout"
[ 2390.695] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2390.695] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2390.695] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2390.695] (**) |-->Screen "aticonfig-Screen[0]-1" (1)
[ 2390.695] (**) | |-->Monitor "aticonfig-Monitor[0]-1"
[ 2390.695] (**) | |-->Device "aticonfig-Device[0]-1"
[ 2390.695] (==) Automatically adding devices
[ 2390.695] (==) Automatically enabling devices
[ 2390.699] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2390.699] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 2390.699] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2390.699] (II) Loader magic: 0x7ceac0
[ 2390.699] (II) Module ABI versions:
[ 2390.699] X.Org ANSI C Emulation: 0.4
[ 2390.699] X.Org Video Driver: 11.0
[ 2390.699] X.Org XInput driver : 13.0
[ 2390.699] X.Org Server Extension : 6.0
[ 2390.700] (--) PCI:*(0:2:0:0) 1002:6739:1787:2304 rev 0, Mem @ 0xe0000000/268435456, 0xfbbc0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 2390.700] (II) "extmod" will be loaded by default.
[ 2390.700] (II) "dbe" will be loaded by default.
[ 2390.700] (II) "glx" will be loaded by default.
[ 2390.700] (II) "record" will be loaded by default.
[ 2390.700] (II) "dri" will be loaded by default.
[ 2390.700] (II) "dri2" will be loaded by default.
[ 2390.700] (II) LoadModule: "extmod"
[ 2390.701] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 2390.702] (II) Module extmod: vendor="X.Org Foundation"
[ 2390.702] compiled for 1.11.4, module version = 1.0.0
[ 2390.702] Module class: X.Org Server Extension
[ 2390.702] ABI class: X.Org Server Extension, version 6.0
[ 2390.702] (II) Loading extension MIT-SCREEN-SAVER
[ 2390.702] (II) Loading extension XFree86-VidModeExtension
[ 2390.702] (II) Loading extension XFree86-DGA
[ 2390.702] (II) Loading extension DPMS
[ 2390.702] (II) Loading extension XVideo
[ 2390.702] (II) Loading extension XVideo-MotionCompensation
[ 2390.702] (II) Loading extension X-Resource
[ 2390.702] (II) LoadModule: "dbe"
[ 2390.702] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 2390.703] (II) Module dbe: vendor="X.Org Foundation"
[ 2390.703] compiled for 1.11.4, module version = 1.0.0
[ 2390.703] Module class: X.Org Server Extension
[ 2390.703] ABI class: X.Org Server Extension, version 6.0
[ 2390.703] (II) Loading extension DOUBLE-BUFFER
[ 2390.703] (II) LoadModule: "glx"
[ 2390.703] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 2390.703] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2390.703] compiled for 6.9.0, module version = 1.0.0
[ 2390.703] (II) Loading extension GLX
[ 2390.703] (II) LoadModule: "record"
[ 2390.703] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 2390.704] (II) Module record: vendor="X.Org Foundation"
[ 2390.704] compiled for 1.11.4, module version = 1.13.0
[ 2390.704] Module class: X.Org Server Extension
[ 2390.704] ABI class: X.Org Server Extension, version 6.0
[ 2390.704] (II) Loading extension RECORD
[ 2390.704] (II) LoadModule: "dri"
[ 2390.704] (WW) Warning, couldn't open module dri
[ 2390.704] (II) UnloadModule: "dri"
[ 2390.704] (II) Unloading dri
[ 2390.704] (EE) Failed to load module "dri" (module does not exist, 0)
[ 2390.704] (II) LoadModule: "dri2"
[ 2390.704] (WW) Warning, couldn't open module dri2
[ 2390.704] (II) UnloadModule: "dri2"
[ 2390.704] (II) Unloading dri2
[ 2390.704] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 2390.704] (II) LoadModule: "fglrx"
[ 2390.704] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 2390.712] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 2390.712] compiled for 1.4.99.906, module version = 8.95.3
[ 2390.712] Module class: X.Org Video Driver
[ 2390.712] (II) Loading sub module "fglrxdrm"
[ 2390.712] (II) LoadModule: "fglrxdrm"
[ 2390.712] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2390.712] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 2390.712] compiled for 1.4.99.906, module version = 8.95.3
[ 2390.712] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[ 2390.712] (II) ATI Proprietary Linux Driver Release Identifier: 8.95
[ 2390.712] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:05:02
[ 2390.712] (--) using VT number 7
[ 2390.715] (WW) Falling back to old probe method for fglrx
[ 2390.719] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2390.720] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 2390.720] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 2390.720] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2390.721] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 2390.721] (II) AMD Video driver is signed
[ 2390.721] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 2390.721] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2390.721] (II) fglrx(0): pEnt->device->identifier=0x7fe050
[ 2390.721] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 2390.721] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2390.721] (II) fglrx(1): pEnt->device->identifier=0x7fe050
[ 2390.721] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 2390.721] (II) Loading sub module "vgahw"
[ 2390.721] (II) LoadModule: "vgahw"
[ 2390.721] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 2390.722] (II) Module vgahw: vendor="X.Org Foundation"
[ 2390.722] compiled for 1.11.4, module version = 0.1.0
[ 2390.722] ABI class: X.Org Video Driver, version 11.0
[ 2390.722] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2390.722] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2390.722] (==) fglrx(0): Default visual is TrueColor
[ 2390.722] (**) fglrx(0): Option "UseFastTLS" "0"
[ 2390.722] (**) fglrx(0): Option "DPMS" "true"
[ 2390.722] (==) fglrx(0): RGB weight 888
[ 2390.722] (II) fglrx(0): Using 8 bits per RGB
[ 2390.722] (==) fglrx(0): Buffer Tiling is ON
[ 2390.722] (II) Loading sub module "fglrxdrm"
[ 2390.722] (II) LoadModule: "fglrxdrm"
[ 2390.722] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 2390.722] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 2390.722] compiled for 1.4.99.906, module version = 8.95.3
[ 2390.723] ukiDynamicMajor: found major device number 246
[ 2390.723] ukiDynamicMajor: found major device number 246
[ 2390.723] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2390.723] ukiOpenDevice: node name is /dev/ati/card0
[ 2390.723] ukiOpenDevice: open result is 12, (OK)
[ 2390.723] ukiOpenByBusid: ukiOpenMinor returns 12
[ 2390.723] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2390.723] (**) fglrx(0): NoAccel = NO
[ 2390.723] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 2390.723] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739)
[ 2390.723] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2304)
[ 2390.723] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 2390.723] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 2390.723] (--) fglrx(0): MMIO registers at 0xfbbc0000
[ 2390.723] (--) fglrx(0): I/O port at 0x0000ce00
[ 2390.723] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2390.723] (II) fglrx(0): AC Adapter is used
[ 2390.727] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2390.807] (II) Loading sub module "vbe"
[ 2390.807] (II) LoadModule: "vbe"
[ 2390.807] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 2390.808] (II) Module vbe: vendor="X.Org Foundation"
[ 2390.808] compiled for 1.11.4, module version = 1.1.0
[ 2390.808] ABI class: X.Org Video Driver, version 11.0
[ 2390.808] (II) fglrx(0): VESA BIOS detected
[ 2390.808] (II) fglrx(0): VESA VBE Version 3.0
[ 2390.808] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2390.808] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2390.808] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 2390.808] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 2390.808] (II) fglrx(0): VESA VBE OEM Product: BARTS
[ 2390.808] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2390.844] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 2390.844] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 2390.844] (II) fglrx(0): PCIE card detected
[ 2390.844] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2390.844] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2390.848] (II) fglrx(0): Using adapter: 2:0.0.
[ 2390.877] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 2391.029] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 2391.029] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2391.029] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2391.029] (==) fglrx(0): Center Mode is disabled
[ 2391.029] (II) Loading sub module "fb"
[ 2391.029] (II) LoadModule: "fb"
[ 2391.029] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 2391.030] (II) Module fb: vendor="X.Org Foundation"
[ 2391.030] compiled for 1.11.4, module version = 1.0.0
[ 2391.031] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2391.031] (II) Loading sub module "ddc"
[ 2391.031] (II) LoadModule: "ddc"
[ 2391.031] (II) Module "ddc" already built-in
[ 2391.171] (II) fglrx(0): Finished Initialize PPLIB!
[ 2391.172] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2391.172] (II) fglrx(0): Output DFP2 has no monitor section
[ 2391.172] (II) fglrx(0): Output DFP3 has no monitor section
[ 2391.172] (II) fglrx(0): Output DFP4 has no monitor section
[ 2391.172] (II) fglrx(0): Output DFP5 has no monitor section
[ 2391.172] (II) fglrx(0): Output DFP6 has no monitor section
[ 2391.172] (II) fglrx(0): Output DFP7 has no monitor section
[ 2391.172] (II) fglrx(0): Output CRT1 has no monitor section
[ 2391.172] (II) Loading sub module "ddc"
[ 2391.172] (II) LoadModule: "ddc"
[ 2391.172] (II) Module "ddc" already built-in
[ 2391.172] (II) fglrx(0): Connected Display0: DFP7
[ 2391.172] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2391.172] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 2391.172] (II) fglrx(0): Year: 2006 Week: 12
[ 2391.172] (II) fglrx(0): EDID Version: 1.3
[ 2391.172] (II) fglrx(0): Digital Display Input
[ 2391.172] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 2391.172] (II) fglrx(0): Gamma: 2.20
[ 2391.172] (II) fglrx(0): DPMS capabilities: Off
[ 2391.172] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2391.172] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 2391.172] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 2391.172] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 2391.172] (II) fglrx(0): Manufacturer's mask: 0
[ 2391.172] (II) fglrx(0): Supported detailed timing:
[ 2391.172] (II) fglrx(0): clock: 71.0 MHz Image Size: 646 x 406 mm
[ 2391.172] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 2391.172] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 2391.172] (II) fglrx(0): Supported detailed timing:
[ 2391.172] (II) fglrx(0): clock: 268.0 MHz Image Size: 646 x 406 mm
[ 2391.172] (II) fglrx(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 2391.172] (II) fglrx(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 2391.172] (II) fglrx(0): Monitor name: DELL 3007WFP
[ 2391.172] (II) fglrx(0): Serial No: 0XD31063HG06H
[ 2391.172] (II) fglrx(0): EDID (in hex):
[ 2391.172] (II) fglrx(0): 00ffffffffffff0010ac164047303648
[ 2391.172] (II) fglrx(0): 0c1001038040287828fe87a3574a9c25
[ 2391.172] (II) fglrx(0): 13505400000001010101010101010101
[ 2391.172] (II) fglrx(0): 010101010101bc1b00a0502017303020
[ 2391.172] (II) fglrx(0): 360086962100001ab06800a0a0402e60
[ 2391.172] (II) fglrx(0): 3020360086962100001e000000fc0044
[ 2391.172] (II) fglrx(0): 454c4c20333030375746500a000000ff
[ 2391.172] (II) fglrx(0): 003058443331303633484730364800f1
[ 2391.172] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2391.172] (II) fglrx(0): EDID for output DFP1
[ 2391.172] (II) fglrx(0): EDID for output DFP2
[ 2391.172] (II) fglrx(0): EDID for output DFP3
[ 2391.172] (II) fglrx(0): EDID for output DFP4
[ 2391.172] (II) fglrx(0): EDID for output DFP5
[ 2391.172] (II) fglrx(0): EDID for output DFP6
[ 2391.172] (II) fglrx(0): EDID for output DFP7
[ 2391.172] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 2391.172] (II) fglrx(0): Year: 2006 Week: 12
[ 2391.172] (II) fglrx(0): EDID Version: 1.3
[ 2391.172] (II) fglrx(0): Digital Display Input
[ 2391.172] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 2391.172] (II) fglrx(0): Gamma: 2.20
[ 2391.172] (II) fglrx(0): DPMS capabilities: Off
[ 2391.172] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2391.172] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 2391.172] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 2391.172] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 2391.172] (II) fglrx(0): Manufacturer's mask: 0
[ 2391.172] (II) fglrx(0): Supported detailed timing:
[ 2391.172] (II) fglrx(0): clock: 71.0 MHz Image Size: 646 x 406 mm
[ 2391.172] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 2391.172] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 2391.172] (II) fglrx(0): Supported detailed timing:
[ 2391.172] (II) fglrx(0): clock: 268.0 MHz Image Size: 646 x 406 mm
[ 2391.172] (II) fglrx(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 2391.172] (II) fglrx(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 2391.172] (II) fglrx(0): Monitor name: DELL 3007WFP
[ 2391.172] (II) fglrx(0): Serial No: 0XD31063HG06H
[ 2391.172] (II) fglrx(0): EDID (in hex):
[ 2391.172] (II) fglrx(0): 00ffffffffffff0010ac164047303648
[ 2391.172] (II) fglrx(0): 0c1001038040287828fe87a3574a9c25
[ 2391.172] (II) fglrx(0): 13505400000001010101010101010101
[ 2391.172] (II) fglrx(0): 010101010101bc1b00a0502017303020
[ 2391.172] (II) fglrx(0): 360086962100001ab06800a0a0402e60
[ 2391.172] (II) fglrx(0): 3020360086962100001e000000fc0044
[ 2391.172] (II) fglrx(0): 454c4c20333030375746500a000000ff
[ 2391.172] (II) fglrx(0): 003058443331303633484730364800f1
[ 2391.172] (II) fglrx(0): Printing probed modes for output DFP7
[ 2391.172] (II) fglrx(0): Modeline "1280x800"x60.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 2391.172] (II) fglrx(0): Modeline "1280x768"x60.0 71.00 1280 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 2391.172] (II) fglrx(0): Modeline "1280x720"x60.0 71.00 1280 1328 1360 1440 720 803 809 823 +hsync -vsync (49.3 kHz)
[ 2391.172] (II) fglrx(0): Modeline "1024x768"x60.0 71.00 1024 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 2391.172] (II) fglrx(0): Modeline "800x600"x60.0 71.00 800 1328 1360 1440 600 803 809 823 +hsync -vsync (49.3 kHz)
[ 2391.172] (II) fglrx(0): Modeline "640x480"x60.0 71.00 640 1328 1360 1440 480 803 809 823 +hsync -vsync (49.3 kHz)
[ 2391.172] (II) fglrx(0): EDID for output CRT1
[ 2391.172] (II) fglrx(0): Output DFP1 disconnected
[ 2391.173] (II) fglrx(0): Output DFP2 disconnected
[ 2391.173] (II) fglrx(0): Output DFP3 disconnected
[ 2391.173] (II) fglrx(0): Output DFP4 disconnected
[ 2391.173] (II) fglrx(0): Output DFP5 disconnected
[ 2391.173] (II) fglrx(0): Output DFP6 disconnected
[ 2391.173] (II) fglrx(0): Output DFP7 connected
[ 2391.173] (II) fglrx(0): Output CRT1 disconnected
[ 2391.173] (II) fglrx(0): Using exact sizes for initial modes
[ 2391.173] (II) fglrx(0): Output DFP7 using initial mode 1280x800
[ 2391.173] (II) fglrx(0): DPI set to (96, 96)
[ 2391.173] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2391.173] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected.
[ 2391.173] (==) fglrx(0): PseudoColor visuals disabled
[ 2391.173] (II) Loading sub module "ramdac"
[ 2391.173] (II) LoadModule: "ramdac"
[ 2391.173] (II) Module "ramdac" already built-in
[ 2391.173] (==) fglrx(0): NoDRI = NO
[ 2391.173] (==) fglrx(0): Capabilities: 0x00000000
[ 2391.173] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2391.173] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2391.173] (**) fglrx(0): UseFastTLS=0
[ 2391.173] (==) fglrx(0): BlockSignalsOnLock=1
[ 2391.173] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === begin
[ 2391.173] (WW) fglrx(1): Quitting screen 1 -- no monitor specified.
[ 2391.173] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === end
[ 2391.173] (II) UnloadModule: "fglrx"
[ 2391.173] (II) Unloading fglrx
[ 2391.173] (II) UnloadModule: "fglrxdrm"
[ 2391.173] (II) Unloading fglrxdrm
[ 2391.173] (--) Depth 24 pixmap format is 32 bpp
[ 2391.173] (II) Loading extension ATIFGLRXDRI
[ 2391.173] (II) fglrx(0): doing swlDriScreenInit
[ 2391.173] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2391.173] ukiDynamicMajor: found major device number 246
[ 2391.173] ukiDynamicMajor: found major device number 246
[ 2391.173] ukiDynamicMajor: found major device number 246
[ 2391.173] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2391.173] ukiOpenDevice: node name is /dev/ati/card0
[ 2391.173] ukiOpenDevice: open result is 17, (OK)
[ 2391.173] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2391.173] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2391.173] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2391.173] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2391.173] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 2391.173] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fb46a5b4000
[ 2391.173] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 2391.173] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2391.173] (II) fglrx(0): swlDriScreenInit done
[ 2391.173] (II) fglrx(0): Kernel Module Version Information:
[ 2391.173] (II) fglrx(0): Name: fglrx
[ 2391.173] (II) fglrx(0): Version: 8.96.4
[ 2391.173] (II) fglrx(0): Date: Apr 5 2012
[ 2391.173] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 2391.173] (WW) fglrx(0): Kernel Module version does *not* match driver.
[ 2391.173] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[ 2391.173] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2391.173] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fb46a5b4000
[ 2391.173] (WW) fglrx(0): ***********************************************************
[ 2391.173] (WW) fglrx(0): * DRI initialization failed *
[ 2391.173] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 2391.173] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 2391.173] (WW) fglrx(0): ***********************************************************
[ 2391.173] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x08000000
[ 2391.181] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[ 2391.181] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[ 2391.181] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[ 2391.181] (==) fglrx(0): Backing store disabled
[ 2391.181] (II) Loading extension FGLRXEXTENSION
[ 2391.181] (**) fglrx(0): DPMS enabled
[ 2391.182] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2391.182] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 2391.182] (II) LoadModule: "glesx"
[ 2391.182] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 2391.182] (II) Module glesx: vendor="X.Org Foundation"
[ 2391.182] compiled for 1.4.99.906, module version = 1.0.0
[ 2391.182] (II) Loading extension GLESX
[ 2391.182] (II) fglrx(0): GLESX enableFlags = 576
[ 2391.182] (II) LoadModule: "amdxmm"
[ 2391.182] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 2391.182] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2391.182] compiled for 1.4.99.906, module version = 2.0.0
[ 2391.182] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 2391.182] (EE) fglrx(0): XMM failed to initialize
[ 2391.182] (WW) fglrx(0): No XV video playback available
[ 2391.182] (II) fglrx(0): Enable composite support successfully
[ 2391.182] (WW) fglrx(0): Option "VendorName" is not used
[ 2391.182] (WW) fglrx(0): Option "ModelName" is not used
[ 2391.182] (==) fglrx(0): Silken mouse enabled
[ 2391.183] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2391.183] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 2391.219] (--) RandR disabled
[ 2391.219] (II) Initializing built-in extension Generic Event Extension
[ 2391.219] (II) Initializing built-in extension SHAPE
[ 2391.219] (II) Initializing built-in extension MIT-SHM
[ 2391.219] (II) Initializing built-in extension XInputExtension
[ 2391.219] (II) Initializing built-in extension XTEST
[ 2391.219] (II) Initializing built-in extension BIG-REQUESTS
[ 2391.219] (II) Initializing built-in extension SYNC
[ 2391.219] (II) Initializing built-in extension XKEYBOARD
[ 2391.219] (II) Initializing built-in extension XC-MISC
[ 2391.219] (II) Initializing built-in extension XINERAMA
[ 2391.219] (II) Initializing built-in extension XFIXES
[ 2391.219] (II) Initializing built-in extension RENDER
[ 2391.219] (II) Initializing built-in extension RANDR
[ 2391.219] (II) Initializing built-in extension COMPOSITE
[ 2391.219] (II) Initializing built-in extension DAMAGE
[ 2391.220] (II) AIGLX: Screen 0 is not DRI capable
[ 2391.221] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 2391.223] (II) fglrx(0): Setting screen physical size to 338 x 211
[ 2391.293] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2391.293] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2391.293] (II) LoadModule: "evdev"
[ 2391.293] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 2391.293] (II) Module evdev: vendor="X.Org Foundation"
[ 2391.293] compiled for 1.11.2, module version = 2.6.0
[ 2391.293] Module class: X.Org XInput Driver
[ 2391.293] ABI class: X.Org XInput driver, version 13.0
[ 2391.293] (II) Using input driver 'evdev' for 'Power Button'
[ 2391.293] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 2391.293] (**) Power Button: always reports core events
[ 2391.293] (**) Power Button: Device: "/dev/input/event3"
[ 2391.293] (--) Power Button: Found keys
[ 2391.294] (II) Power Button: Configuring as keyboard
[ 2391.294] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2391.294] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2391.294] (**) Option "xkb_rules" "evdev"
[ 2391.294] (**) Option "xkb_model" "evdev"
[ 2391.294] (**) Option "xkb_layout" "us"
[ 2391.317] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2391.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2391.317] (II) Using input driver 'evdev' for 'Power Button'
[ 2391.317] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 2391.317] (**) Power Button: always reports core events
[ 2391.317] (**) Power Button: Device: "/dev/input/event2"
[ 2391.317] (--) Power Button: Found keys
[ 2391.317] (II) Power Button: Configuring as keyboard
[ 2391.317] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2391.317] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2391.317] (**) Option "xkb_rules" "evdev"
[ 2391.317] (**) Option "xkb_model" "evdev"
[ 2391.317] (**) Option "xkb_layout" "us"
[ 2391.317] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 2391.317] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 2391.317] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2391.317] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 2391.317] (**) Logitech USB Receiver: always reports core events
[ 2391.317] (**) Logitech USB Receiver: Device: "/dev/input/event0"
[ 2391.317] (--) Logitech USB Receiver: Found keys
[ 2391.317] (II) Logitech USB Receiver: Configuring as keyboard
[ 2391.317] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input0/event0"
[ 2391.317] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 2391.317] (**) Option "xkb_rules" "evdev"
[ 2391.317] (**) Option "xkb_model" "evdev"
[ 2391.317] (**) Option "xkb_layout" "us"
[ 2391.317] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 2391.317] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 2391.317] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 2391.317] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2391.317] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 2391.317] (**) Logitech USB Receiver: always reports core events
[ 2391.317] (**) Logitech USB Receiver: Device: "/dev/input/event1"
[ 2391.317] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 2391.317] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 2391.317] (--) Logitech USB Receiver: Found relative axes
[ 2391.317] (--) Logitech USB Receiver: Found x and y relative axes
[ 2391.317] (--) Logitech USB Receiver: Found keys
[ 2391.317] (II) Logitech USB Receiver: Configuring as mouse
[ 2391.317] (II) Logitech USB Receiver: Configuring as keyboard
[ 2391.317] (II) Logitech USB Receiver: Adding scrollwheel support
[ 2391.317] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2391.317] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2391.318] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input1/event1"
[ 2391.318] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 2391.318] (**) Option "xkb_rules" "evdev"
[ 2391.318] (**) Option "xkb_model" "evdev"
[ 2391.318] (**) Option "xkb_layout" "us"
[ 2391.318] (II) Logitech USB Receiver: initialized for relative axes.
[ 2391.318] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2391.318] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2391.318] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2391.318] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2391.318] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 2391.318] (II) No input driver specified, ignoring this device.
[ 2391.318] (II) This device may have been added with another device file.
[ 2391.318] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2391.318] (II) No input driver specified, ignoring this device.
[ 2391.318] (II) This device may have been added with another device file.
[ 2391.320] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2391.610] (II) Power Button: Close
[ 2391.610] (II) UnloadModule: "evdev"
[ 2391.610] (II) Unloading evdev
[ 2391.930] (II) Power Button: Close
[ 2391.930] (II) UnloadModule: "evdev"
[ 2391.930] (II) Unloading evdev
[ 2392.250] (II) Logitech USB Receiver: Close
[ 2392.250] (II) UnloadModule: "evdev"
[ 2392.250] (II) Unloading evdev
[ 2392.570] (II) Logitech USB Receiver: Close
[ 2392.570] (II) UnloadModule: "evdev"
[ 2392.570] (II) Unloading evdev
[ 2392.623] (II) fglrx(0): Interrupt handler Shutdown.
[ 2392.778] Server terminated successfully (0). Closing log file.
|
And then as a user I get this one?
[code:1:38f95795d1]
[ 331.368]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 331.370] X Protocol Version 11, Revision 0
[ 331.371] Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
[ 331.372] Current Operating System: Linux visorghost 3.2.12-gentoo #11 SMP Wed May 2 12:29:53 BST 2012 x86_64
[ 331.373] Kernel command line: root=/dev/ram0 real_root=/dev/sda5 pcie_aspm=force dolvm domdadm radeon.modeset=1 video=radeondrmfb:1400x1050-24@75
[ 331.374] Build Date: 02 May 2012 12:11:14PM
[ 331.375]
[ 331.376] Current version of pixman: 0.24.0
[ 331.377] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 331.379] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 331.382] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 15:40:27 2012
[ 331.387] (==) Using config file: "/etc/X11/xorg.conf"
[ 331.388] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 331.389] (==) ServerLayout "aticonfig Layout"
[ 331.389] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 331.390] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 331.390] (**) | |-->Device "aticonfig-Device[0]-0"
[ 331.390] (**) |-->Screen "aticonfig-Screen[0]-1" (1)
[ 331.390] (**) | |-->Monitor "aticonfig-Monitor[0]-1"
[ 331.390] (**) | |-->Device "aticonfig-Device[0]-1"
[ 331.390] (==) Automatically adding devices
[ 331.390] (==) Automatically enabling devices
[ 331.395] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 331.395] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 331.395] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 331.395] (II) Loader magic: 0x7ceac0
[ 331.395] (II) Module ABI versions:
[ 331.395] X.Org ANSI C Emulation: 0.4
[ 331.395] X.Org Video Driver: 11.0
[ 331.395] X.Org XInput driver : 13.0
[ 331.395] X.Org Server Extension : 6.0
[ 331.396] (--) PCI:*(0:2:0:0) 1002:6739:1787:2304 rev 0, Mem @ 0xe0000000/268435456, 0xfbbc0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 331.396] (II) "extmod" will be loaded by default.
[ 331.396] (II) "dbe" will be loaded by default.
[ 331.396] (II) "glx" will be loaded by default.
[ 331.396] (II) "record" will be loaded by default.
[ 331.396] (II) "dri" will be loaded by default.
[ 331.396] (II) "dri2" will be loaded by default.
[ 331.396] (II) LoadModule: "extmod"
[ 331.397] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 331.398] (II) Module extmod: vendor="X.Org Foundation"
[ 331.398] compiled for 1.11.4, module version = 1.0.0
[ 331.398] Module class: X.Org Server Extension
[ 331.398] ABI class: X.Org Server Extension, version 6.0
[ 331.398] (II) Loading extension MIT-SCREEN-SAVER
[ 331.398] (II) Loading extension XFree86-VidModeExtension
[ 331.398] (II) Loading extension XFree86-DGA
[ 331.398] (II) Loading extension DPMS
[ 331.398] (II) Loading extension XVideo
[ 331.398] (II) Loading extension XVideo-MotionCompensation
[ 331.398] (II) Loading extension X-Resource
[ 331.398] (II) LoadModule: "dbe"
[ 331.399] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 331.399] (II) Module dbe: vendor="X.Org Foundation"
[ 331.399] compiled for 1.11.4, module version = 1.0.0
[ 331.399] Module class: X.Org Server Extension
[ 331.399] ABI class: X.Org Server Extension, version 6.0
[ 331.399] (II) Loading extension DOUBLE-BUFFER
[ 331.399] (II) LoadModule: "glx"
[ 331.400] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 331.402] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 331.402] compiled for 6.9.0, module version = 1.0.0
[ 331.403] (II) Loading extension GLX
[ 331.403] (II) LoadModule: "record"
[ 331.403] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 331.403] (II) Module record: vendor="X.Org Foundation"
[ 331.403] compiled for 1.11.4, module version = 1.13.0
[ 331.403] Module class: X.Org Server Extension
[ 331.403] ABI class: X.Org Server Extension, version 6.0
[ 331.403] (II) Loading extension RECORD
[ 331.403] (II) LoadModule: "dri"
[ 331.404] (WW) Warning, couldn't open module dri
[ 331.404] (II) UnloadModule: "dri"
[ 331.404] (II) Unloading dri
[ 331.404] (EE) Failed to load module "dri" (module does not exist, 0)
[ 331.405] (II) LoadModule: "dri2"
[ 331.405] (WW) Warning, couldn't open module dri2
[ 331.405] (II) UnloadModule: "dri2"
[ 331.405] (II) Unloading dri2
[ 331.405] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 331.406] (II) LoadModule: "fglrx"
[ 331.406] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 331.435] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 331.436] compiled for 1.4.99.906, module version = 8.95.3
[ 331.436] Module class: X.Org Video Driver
[ 331.437] (II) Loading sub module "fglrxdrm"
[ 331.437] (II) LoadModule: "fglrxdrm"
[ 331.437] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 331.438] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 331.438] compiled for 1.4.99.906, module version = 8.95.3
[ 331.438] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[ 331.438] (II) ATI Proprietary Linux Driver Release Identifier: 8.95
[ 331.438] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:05:02
[ 331.438] (--) using VT number 7
[ 331.441] (WW) Falling back to old probe method for fglrx
[ 331.447] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 331.449] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 331.449] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 331.449] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 331.451] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 331.451] (II) AMD Video driver is signed
[ 331.451] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 331.451] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 331.451] (II) fglrx(0): pEnt->device->identifier=0x7fe050
[ 331.451] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 331.451] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 331.451] (II) fglrx(1): pEnt->device->identifier=0x7fe050
[ 331.451] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 331.452] (II) Loading sub module "vgahw"
[ 331.452] (II) LoadModule: "vgahw"
[ 331.452] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 331.452] (II) Module vgahw: vendor="X.Org Foundation"
[ 331.452] compiled for 1.11.4, module version = 0.1.0
[ 331.452] ABI class: X.Org Video Driver, version 11.0
[ 331.452] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 331.452] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 331.452] (==) fglrx(0): Default visual is TrueColor
[ 331.452] (**) fglrx(0): Option "UseFastTLS" "0"
[ 331.452] (**) fglrx(0): Option "DPMS" "true"
[ 331.452] (==) fglrx(0): RGB weight 888
[ 331.452] (II) fglrx(0): Using 8 bits per RGB
[ 331.452] (==) fglrx(0): Buffer Tiling is ON
[ 331.453] (II) Loading sub module "fglrxdrm"
[ 331.453] (II) LoadModule: "fglrxdrm"
[ 331.453] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 331.453] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 331.453] compiled for 1.4.99.906, module version = 8.95.3
[ 331.454] ukiDynamicMajor: found major device number 246
[ 331.454] ukiDynamicMajor: found major device number 246
[ 331.454] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 331.454] ukiOpenDevice: node name is /dev/ati/card0
[ 331.454] ukiOpenDevice: open result is 12, (OK)
[ 331.454] ukiOpenByBusid: ukiOpenMinor returns 12
[ 331.454] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 331.454] (**) fglrx(0): NoAccel = NO
[ 331.454] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 331.454] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739)
[ 331.454] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2304)
[ 331.454] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 331.454] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 331.454] (--) fglrx(0): MMIO registers at 0xfbbc0000
[ 331.454] (--) fglrx(0): I/O port at 0x0000ce00
[ 331.454] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 331.455] (II) fglrx(0): AC Adapter is used
[ 331.461] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 331.543] (II) Loading sub module "vbe"
[ 331.543] (II) LoadModule: "vbe"
[ 331.543] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 331.544] (II) Module vbe: vendor="X.Org Foundation"
[ 331.544] compiled for 1.11.4, module version = 1.1.0
[ 331.544] ABI class: X.Org Video Driver, version 11.0
[ 331.544] (II) fglrx(0): VESA BIOS detected
[ 331.544] (II) fglrx(0): VESA VBE Version 3.0
[ 331.544] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 331.544] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 331.544] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 331.544] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 331.544] (II) fglrx(0): VESA VBE OEM Product: BARTS
[ 331.544] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 331.579] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 331.579] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 331.579] (II) fglrx(0): PCIE card detected
[ 331.579] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 331.579] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 331.584] (II) fglrx(0): Using adapter: 2:0.0.
[ 331.612] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 331.764] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 331.764] (II) fglrx(0): RandR 1.2 support is enabled!
[ 331.764] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 331.764] (==) fglrx(0): Center Mode is disabled
[ 331.764] (II) Loading sub module "fb"
[ 331.764] (II) LoadModule: "fb"
[ 331.764] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 331.765] (II) Module fb: vendor="X.Org Foundation"
[ 331.766] compiled for 1.11.4, module version = 1.0.0
[ 331.766] ABI class: X.Org ANSI C Emulation, version 0.4
[ 331.766] (II) Loading sub module "ddc"
[ 331.766] (II) LoadModule: "ddc"
[ 331.766] (II) Module "ddc" already built-in
[ 331.914] (II) fglrx(0): Finished Initialize PPLIB!
[ 331.916] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 331.916] (II) fglrx(0): Output DFP2 has no monitor section
[ 331.916] (II) fglrx(0): Output DFP3 has no monitor section
[ 331.916] (II) fglrx(0): Output DFP4 has no monitor section
[ 331.916] (II) fglrx(0): Output DFP5 has no monitor section
[ 331.916] (II) fglrx(0): Output DFP6 has no monitor section
[ 331.916] (II) fglrx(0): Output DFP7 has no monitor section
[ 331.916] (II) fglrx(0): Output CRT1 has no monitor section
[ 331.916] (II) Loading sub module "ddc"
[ 331.916] (II) LoadModule: "ddc"
[ 331.916] (II) Module "ddc" already built-in
[ 331.916] (II) fglrx(0): Connected Display0: DFP7
[ 331.916] (II) fglrx(0): Display0 EDID data ---------------------------
[ 331.916] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 331.916] (II) fglrx(0): Year: 2006 Week: 12
[ 331.916] (II) fglrx(0): EDID Version: 1.3
[ 331.916] (II) fglrx(0): Digital Display Input
[ 331.916] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 331.916] (II) fglrx(0): Gamma: 2.20
[ 331.916] (II) fglrx(0): DPMS capabilities: Off
[ 331.916] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 331.916] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 331.916] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 331.916] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 331.916] (II) fglrx(0): Manufacturer's mask: 0
[ 331.916] (II) fglrx(0): Supported detailed timing:
[ 331.916] (II) fglrx(0): clock: 71.0 MHz Image Size: 646 x 406 mm
[ 331.916] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 331.916] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 331.916] (II) fglrx(0): Supported detailed timing:
[ 331.916] (II) fglrx(0): clock: 268.0 MHz Image Size: 646 x 406 mm
[ 331.916] (II) fglrx(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 331.916] (II) fglrx(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 331.916] (II) fglrx(0): Monitor name: DELL 3007WFP
[ 331.916] (II) fglrx(0): Serial No: 0XD31063HG06H
[ 331.916] (II) fglrx(0): EDID (in hex):
[ 331.916] (II) fglrx(0): 00ffffffffffff0010ac164047303648
[ 331.916] (II) fglrx(0): 0c1001038040287828fe87a3574a9c25
[ 331.916] (II) fglrx(0): 13505400000001010101010101010101
[ 331.916] (II) fglrx(0): 010101010101bc1b00a0502017303020
[ 331.916] (II) fglrx(0): 360086962100001ab06800a0a0402e60
[ 331.916] (II) fglrx(0): 3020360086962100001e000000fc0044
[ 331.916] (II) fglrx(0): 454c4c20333030375746500a000000ff
[ 331.916] (II) fglrx(0): 003058443331303633484730364800f1
[ 331.916] (II) fglrx(0): End of Display0 EDID data --------------------
[ 331.917] (II) fglrx(0): EDID for output DFP1
[ 331.917] (II) fglrx(0): EDID for output DFP2
[ 331.917] (II) fglrx(0): EDID for output DFP3
[ 331.917] (II) fglrx(0): EDID for output DFP4
[ 331.917] (II) fglrx(0): EDID for output DFP5
[ 331.917] (II) fglrx(0): EDID for output DFP6
[ 331.917] (II) fglrx(0): EDID for output DFP7
[ 331.917] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 331.917] (II) fglrx(0): Year: 2006 Week: 12
[ 331.917] (II) fglrx(0): EDID Version: 1.3
[ 331.917] (II) fglrx(0): Digital Display Input
[ 331.917] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 331.917] (II) fglrx(0): Gamma: 2.20
[ 331.917] (II) fglrx(0): DPMS capabilities: Off
[ 331.917] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 331.917] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 331.917] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 331.917] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 331.917] (II) fglrx(0): Manufacturer's mask: 0
[ 331.917] (II) fglrx(0): Supported detailed timing:
[ 331.917] (II) fgl |
|
| Back to top |
|
|
vrghost
n00b
Joined: 03 Oct 2003
Posts: 25
Location: London
|
| Posted: Wed May 02, 2012 6:59 pm Post subject: |
|
|
OK, seems like I am only getting the memory issue now.
| Code: | [ 331.917] (II) fglrx(0): EDID for output DFP1
[ 331.917] (II) fglrx(0): EDID for output DFP2
[ 331.917] (II) fglrx(0): EDID for output DFP3
[ 331.917] (II) fglrx(0): EDID for output DFP4
[ 331.917] (II) fglrx(0): EDID for output DFP5
[ 331.917] (II) fglrx(0): EDID for output DFP6
[ 331.917] (II) fglrx(0): EDID for output DFP7
[ 331.917] (II) fglrx(0): Manufacturer: DEL Model: 4016 Serial#: 1211510855
[ 331.917] (II) fglrx(0): Year: 2006 Week: 12
[ 331.917] (II) fglrx(0): EDID Version: 1.3
[ 331.917] (II) fglrx(0): Digital Display Input
[ 331.917] (II) fglrx(0): Max Image Size [cm]: horiz.: 64 vert.: 40
[ 331.917] (II) fglrx(0): Gamma: 2.20
[ 331.917] (II) fglrx(0): DPMS capabilities: Off
[ 331.917] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 331.917] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[ 331.917] (II) fglrx(0): redX: 0.640 redY: 0.343 greenX: 0.292 greenY: 0.611
[ 331.917] (II) fglrx(0): blueX: 0.146 blueY: 0.074 whiteX: 0.313 whiteY: 0.331
[ 331.917] (II) fglrx(0): Manufacturer's mask: 0
[ 331.917] (II) fglrx(0): Supported detailed timing:
[ 331.917] (II) fglrx(0): clock: 71.0 MHz Image Size: 646 x 406 mm
[ 331.917] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 331.917] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 331.917] (II) fglrx(0): Supported detailed timing:
[ 331.917] (II) fglrx(0): clock: 268.0 MHz Image Size: 646 x 406 mm
[ 331.917] (II) fglrx(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0
[ 331.917] (II) fglrx(0): v_active: 1600 v_sync: 1603 v_sync_end 1609 v_blanking: 1646 v_border: 0
[ 331.917] (II) fglrx(0): Monitor name: DELL 3007WFP
[ 331.917] (II) fglrx(0): Serial No: 0XD31063HG06H
[ 331.917] (II) fglrx(0): EDID (in hex):
[ 331.917] (II) fglrx(0): 00ffffffffffff0010ac164047303648
[ 331.917] (II) fglrx(0): 0c1001038040287828fe87a3574a9c25
[ 331.917] (II) fglrx(0): 13505400000001010101010101010101
[ 331.917] (II) fglrx(0): 010101010101bc1b00a0502017303020
[ 331.917] (II) fglrx(0): 360086962100001ab06800a0a0402e60
[ 331.917] (II) fglrx(0): 3020360086962100001e000000fc0044
[ 331.917] (II) fglrx(0): 454c4c20333030375746500a000000ff
[ 331.917] (II) fglrx(0): 003058443331303633484730364800f1
[ 331.917] (II) fglrx(0): Printing probed modes for output DFP7
[ 331.917] (II) fglrx(0): Modeline "1280x800"x60.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
[ 331.917] (II) fglrx(0): Modeline "1280x768"x60.0 71.00 1280 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 331.917] (II) fglrx(0): Modeline "1280x720"x60.0 71.00 1280 1328 1360 1440 720 803 809 823 +hsync -vsync (49.3 kHz)
[ 331.917] (II) fglrx(0): Modeline "1024x768"x60.0 71.00 1024 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz)
[ 331.917] (II) fglrx(0): Modeline "800x600"x60.0 71.00 800 1328 1360 1440 600 803 809 823 +hsync -vsync (49.3 kHz)
[ 331.917] (II) fglrx(0): Modeline "640x480"x60.0 71.00 640 1328 1360 1440 480 803 809 823 +hsync -vsync (49.3 kHz)
[ 331.917] (II) fglrx(0): EDID for output CRT1
[ 331.917] (II) fglrx(0): Output DFP1 disconnected
[ 331.917] (II) fglrx(0): Output DFP2 disconnected
[ 331.917] (II) fglrx(0): Output DFP3 disconnected
[ 331.917] (II) fglrx(0): Output DFP4 disconnected
[ 331.917] (II) fglrx(0): Output DFP5 disconnected
[ 331.917] (II) fglrx(0): Output DFP6 disconnected
[ 331.917] (II) fglrx(0): Output DFP7 connected
[ 331.917] (II) fglrx(0): Output CRT1 disconnected
[ 331.917] (II) fglrx(0): Using exact sizes for initial modes
[ 331.917] (II) fglrx(0): Output DFP7 using initial mode 1280x800
[ 331.917] (II) fglrx(0): DPI set to (96, 96)
[ 331.917] (II) fglrx(0): Eyefinity capable adapter detected.
[ 331.917] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected.
[ 331.917] (==) fglrx(0): PseudoColor visuals disabled
[ 331.917] (II) Loading sub module "ramdac"
[ 331.917] (II) LoadModule: "ramdac"
[ 331.917] (II) Module "ramdac" already built-in
[ 331.917] (==) fglrx(0): NoDRI = NO
[ 331.917] (==) fglrx(0): Capabilities: 0x00000000
[ 331.917] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 331.917] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 331.917] (**) fglrx(0): UseFastTLS=0
[ 331.917] (==) fglrx(0): BlockSignalsOnLock=1
[ 331.917] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === begin
[ 331.917] (WW) fglrx(1): Quitting screen 1 -- no monitor specified.
[ 331.917] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === end
[ 331.917] (II) UnloadModule: "fglrx"
[ 331.917] (II) Unloading fglrx
[ 331.917] (II) UnloadModule: "fglrxdrm"
[ 331.917] (II) Unloading fglrxdrm
[ 331.917] (--) Depth 24 pixmap format is 32 bpp
[ 331.917] (II) Loading extension ATIFGLRXDRI
[ 331.917] (II) fglrx(0): doing swlDriScreenInit
[ 331.917] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 331.917] ukiDynamicMajor: found major device number 246
[ 331.917] ukiDynamicMajor: found major device number 246
[ 331.917] ukiDynamicMajor: found major device number 246
[ 331.917] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 331.917] ukiOpenDevice: node name is /dev/ati/card0
[ 331.917] ukiOpenDevice: open result is 17, (OK)
[ 331.917] ukiOpenByBusid: ukiOpenMinor returns 17
[ 331.917] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 331.917] (II) fglrx(0): [uki] DRM interface version 1.0
[ 331.917] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 331.917] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 331.917] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f185e78f000
[ 331.917] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 331.917] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 331.917] (II) fglrx(0): swlDriScreenInit done
[ 331.917] (II) fglrx(0): Kernel Module Version Information:
[ 331.917] (II) fglrx(0): Name: fglrx
[ 331.917] (II) fglrx(0): Version: 8.95.3
[ 331.917] (II) fglrx(0): Date: Feb 14 2012
[ 331.917] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 331.917] (II) fglrx(0): Kernel Module version matches driver.
[ 331.917] (II) fglrx(0): Kernel Module Build Time Information:
[ 331.917] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.12-gentoo
[ 331.917] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 331.917] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 331.917] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 331.917] (II) fglrx(0): [uki] register handle = 0x00004000
[ 331.928] (EE) fglrx(0): Not enough video memory to allocate primary surface (frame buffer).
[ 331.928] (II) fglrx(0): Shutdown CMMQS
[ 331.929] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 331.929] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7f185e78f000
[ 331.929] (WW) fglrx(0): ***********************************************************
[ 331.929] (WW) fglrx(0): * DRI initialization failed *
[ 331.929] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 331.929] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 331.929] (WW) fglrx(0): ***********************************************************
[ 331.929]
Fatal server error:
[ 331.929] AddScreen/ScreenInit failed for driver 0
[ 331.929]
[ 331.929]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 331.929] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 331.929]
[ 332.611] Server terminated with error (1). Closing log file. |
|
|
| Back to top |
|
|
Jaglover
Advocate
Joined: 29 May 2005
Posts: 3974
Location: Saint Amant, Acadiana
|
| Posted: Wed May 02, 2012 9:14 pm Post subject: |
|
|
In first case you probably didn't give X anything to run, you should put exec <foo> into your .xinitrc where <foo> is some X application, in most cases it's a clever idea to run some window manager instead of a single app. But you have to run something on top if X, otherwise X will shut down because it has nothing to do.
Second problem ... don't know, maybe you enabled a wrong framebuffer for fglrx.
_________________
Please learn how to denote units correctly! |
|
| Back to top |
|
|
vrghost
n00b
Joined: 03 Oct 2003
Posts: 25
Location: London
|
| Posted: Thu May 03, 2012 8:02 am Post subject: |
|
|
Have checked that both users (testing both with root and user) have a .xinitrc.
Not certain why it seemed to work once, have rebooted the server a number of times in between, and can not think of anything that have changed since I ran that one X server session which seemed to work. (the first xorg log in my second post).
Is there any reset function or similar that may make a change? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Installing Gentoo
