| View previous topic :: View next topic |
| Author |
Message |
bookwood
Tux's lil' helper
Joined: 06 Oct 2005
Posts: 123
Location: Dortmund
|
 Posted: Thu Apr 19, 2012 6:54 pm Post subject: emrge of gnustep-base/gnustep-base-1.24.0-r1 fails in econv |
 |
|
Hi all,
on upgrading with emerge -NDu world I got the following error on updating gnustep-base/gnustep-base-1.24.0-r1:
| Code: | >>> Emerging (1 of 4) gnustep-base/gnustep-base-1.24.0-r1
* gnustep-base-1.24.0.tar.gz RMD160 SHA1 SHA256 size ;-) ... [ ok ]
>>> Unpacking source...
>>> Unpacking gnustep-base-1.24.0.tar.gz to /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work
>>> Source unpacked in /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work
>>> Preparing source in /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work/gnustep-base-1.24.0 ...
* Cleaning paths from GNUmakefile ... [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work/gnustep-base-1.24.0 ...
/usr/share/GNUstep/Makefiles/GNUstep.sh: line 261: /usr/GNUstep/System/Library/Makefiles/filesystem.sh: No such file or directory
/usr/share/GNUstep/Makefiles/GNUstep.sh: line 288: /usr/GNUstep/System/Library/Makefiles/print_unique_pathlist.sh: No such file or directory
/usr/share/GNUstep/Makefiles/GNUstep.sh: line 303: /usr/GNUstep/System/Library/Makefiles/print_unique_pathlist.sh: No such file or directory
/usr/share/GNUstep/Makefiles/GNUstep.sh: line 359: /usr/GNUstep/System/Library/Makefiles/print_unique_pathlist.sh: No such file or directory
/usr/share/GNUstep/Makefiles/GNUstep.sh: line 489: /usr/GNUstep/System/Library/Makefiles/print_unique_pathlist.sh: No such file or directory
/usr/share/GNUstep/Makefiles/GNUstep.sh: line 529: /usr/GNUstep/System/Library/Makefiles/print_unique_pathlist.sh: No such file or directory
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --enable-libffi --disable-ffcall --with-ffi-include=/usr/lib64/libffi-3.0.10/include --enable-icu --enable-tls --disable-zeroconf --with-xml-prefix=/usr --with-gmp-include=/usr/include --with-gmp-library=/usr/lib --with-default-config=/etc/GNUstep/GNUstep.conf
configure: error: cannot find install-sh or install.sh in /usr/GNUstep/System/Library/Makefiles "."//usr/GNUstep/System/Library/Makefiles
|
I can't find any file in folder /usr/GNUstep/System/Library/Makefiles/
Here is the output of emerge --info =gnustep-base/gnustep-base-1.24.0-r1
| Code: |
Portage 2.1.10.49 (default/linux/amd64/10.0, gcc-4.5.3, glibc-2.13-r4, 3.2.12-gentoo x86_64)
=================================================================
System Settings
=================================================================
System uname: Linux-3.2.12-gentoo-x86_64-Intel-R-_Core-TM-_i7-2720QM_CPU_@_2.20GHz-with-gentoo-2.0.3
Timestamp of tree: Thu, 19 Apr 2012 15:15:01 +0000
app-shells/bash: 4.2_p20
dev-java/java-config: 2.1.11-r3
dev-lang/python: 2.7.2-r3, 3.2.2
dev-util/cmake: 2.8.6-r4
dev-util/pkgconfig: 0.26
sys-apps/baselayout: 2.0.3
sys-apps/openrc: 0.9.8.4
sys-apps/sandbox: 2.5
sys-devel/autoconf: 2.13, 2.68
sys-devel/automake: 1.11.1
sys-devel/binutils: 2.21.1-r1
sys-devel/gcc: 4.5.3-r2
sys-devel/gcc-config: 1.5-r2
sys-devel/libtool: 2.4-r1
sys-devel/make: 3.82-r1
sys-kernel/linux-headers: 3.1 (virtual/os-headers)
sys-libs/glibc: 2.13-r4
Repositories: gentoo rion java-overlay x-portage
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -march=native "
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /usr/share/maven-bin-3.0/conf /usr/share/openvpn/easy-rsa /var/lib/hsqldb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5.3/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/cli-php5.3/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-O2 -pipe -march=native "
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks ebuild-locks fixlafiles news parallel-fetch protect-owned sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox"
FFLAGS=""
GENTOO_MIRRORS="http://mirror.netcologne.de/gentoo/ http://de-mirror.org/gentoo/ http://mirror.ovh.net/gentoo-distfiles/ http://ftp.snt.utwente.nl/pub/os/linux/gentoo http://mirrors.linuxant.fr/distfiles.gentoo.org/"
LANG="de_DE.UTF-8"
LC_ALL="C"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="de en"
MAKEOPTS="-j 14"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/var/lib/layman/rion /var/lib/layman/java-overlay /usr/local/portage"
SYNC="rsync://rsync.de.gentoo.org/gentoo-portage"
USE="X acl alsa amd64 apache2 apng autoipd avahi berkdb bzip2 cairo cli consolekit cracklib crypt cups curl custom-optimization cvs cxx dbus declarative device-mapper dri extras fontconfig foomaticdb fortran gd gdbm git gpm gtk gtk3 iconv icu ipv6 java jpeg kde kpathsea libssh2 lightning lvm lzma lzo mmx mng modules mp4 mudflap multilib musicbrainz ncurses nls nptl nptlonly nsplugin objc ogg opengl openmp openvpn pam passwordsave pcre perl php png policykit postgres pppd python qemu qt3support qt4 readline reviewboard script semantic-desktop session spice sql sse sse2 ssl subversion svg sysfs tcpd threads truetype udev unicode upower utils v4l vde virt-network vlc vorbis webkit wicd wifi xetex xine xml xorg zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="proxy proxy_ajp poxy_http actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev synaptics wacom" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="de en" PHP_TARGETS="php5-3" QEMU_SOFTMMU_TARGETS="i386 x86_64" QEMU_USER_TARGETS="i386 x86_64" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="nvidia" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
|
Thanks in advance |
|
| Back to top |
|
 |
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Fri Apr 20, 2012 6:00 pm Post subject: |
|
|
on my amd64 system | Code: | | emerge gnustep-base |
just worked fine. You may have picked up a bad ebuild and/or package. suggest waiting a few hours, removing both, forcing a sync, and rerunning | Code: | | emerge gnustep-base |
. Do you have root status while doing this?
start of my build looks like: | Quote: | gnustep-base/gnustep-base-1.24.0-r1
* gnustep-base-1.24.0.tar.gz RMD160 SHA1 SHA256 size  ... [ ok ]
>>> Unpacking source...
>>> Unpacking gnustep-base-1.24.0.tar.gz to /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work
>>> Source unpacked in /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work
>>> Preparing source in /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work/gnustep-base-1.24.0 ...
* Cleaning paths from GNUmakefile ... [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work/gnustep-base-1.24.0 ...
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --enable-libffi --disable-ffcall --with-ffi-include=/usr/lib64/libffi-3.0.10/include --enable-icu --enable-tls --disable-zeroconf --with-xml-prefix=/usr --with-gmp-include=/usr/include --with-gmp-library=/usr/lib --with-default-config=/etc/GNUstep/GNUstep.conf
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking for GNUstep configuration file to use at runtime... /etc/GNUstep/GNUstep.conf
checking whether the GNUstep.conf file path can be set in the environment... yes
checking if we should import an existing configuration file now... yes
checking for default GNUstep configuration file to use... /etc/GNUstep/GNUstep.conf
trying to import "/etc/GNUstep/GNUstep.conf"
configure: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option
checking for GNUstep-base installation domain... LOCAL
checking if we are hardcoding any relative paths in gnustep-base... no
configure: We store the following filesystem layout into gnustep-base, to be used when no config file is found
checking for Makefiles directory... /usr/share/GNUstep/Makefiles
checking for user defaults directory... GNUstep/Defaults
checking for user config file... .GNUstep.conf
checking for System Applications directory... /usr/lib64/GNUstep/Applications
checking for System Admin Applications directory... /usr/lib64/GNUstep/Applications
checking for System Web Applications directory... /usr/lib64/GNUstep/WebApplications
|
_________________
Defund the FCC. |
|
| Back to top |
|
|
bookwood
Tux's lil' helper
Joined: 06 Oct 2005
Posts: 123
Location: Dortmund
|
| Posted: Sun Apr 22, 2012 10:25 pm Post subject: |
|
|
The configure step is missing the files:
| Code: | /usr/GNUstep/System/Library/Makefiles/filesystem.sh
/usr/GNUstep/System/Library/Makefiles/print_unique_pathlist.sh |
How can I determine the package of this files?
The execution of
| Code: | | qfile -q /usr/GNUstep/System/Library/Makefiles/filesystem.sh |
shows nothing. |
|
| Back to top |
|
|
DONAHUE
Watchman
Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC
|
| Posted: Mon Apr 23, 2012 3:06 am Post subject: |
|
|
try running just
| Code: | emerge --sync
emerge -avuND gnustep-base |
if that fails run
| Code: | | ls -al /var/tmp/portage/gnustep-base/gnustep-base-1.24.0-r1/work/gnustep-base-1.24.0 | wgetpaste |
look for a configure file
if you find one read it
as i read what you have shown gnustep-base/gnustep-base-1.24.0-r1 is the package that creates the file structure under /usr. the ebuild first makes the working file structure under /var.
_________________
Defund the FCC. |
|
| Back to top |
|
|
bookwood
Tux's lil' helper
Joined: 06 Oct 2005
Posts: 123
Location: Dortmund
|
| Posted: Thu Apr 26, 2012 7:27 am Post subject: |
|
|
I can't find anything in the configure script, but | Code: | | emerge -e gnustep-base |
did the job. Gnustep works fine. Let's update oolite |
|
| Back to top |
|
|
|
Portage & Programming
