| View previous topic :: View next topic |
| Author |
Message |
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
 Posted: Sun Apr 15, 2012 3:26 pm Post subject: [solved] Problems compiling gtkhtml |
 |
|
Because this new problem isn't related to Gnome 3.4 anymore but to Gnome 3.2, I post it here and make a new thread.
When I try to compile gtkhtml, it exits every time with the same error. My build.log is located at http://pastebin.com/f6S5chuz
Any ideas?
Last edited by dansou90 on Tue Apr 17, 2012 6:17 pm; edited 1 time in total |
|
| Back to top |
|
 |
VoidMage
Advocate
Joined: 14 Oct 2006
Posts: 4809
|
| Posted: Sun Apr 15, 2012 5:39 pm Post subject: |
|
|
Actually, it is related to Gnome 3.4, or more exactly to glib 2.32.
There were certain changes made in glib pkgconfig files, that need a fix or two in a few places (and most likely Gnome 3.4 version of gtkhtml has them). |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Sun Apr 15, 2012 5:42 pm Post subject: |
|
|
| But gtkhtml-4.3.2 is pulled in by Gnome 3.4, while gtkhtml-4.2.2 is pulled in by Gnome 3.2, or am I missing something? |
|
| Back to top |
|
|
VoidMage
Advocate
Joined: 14 Oct 2006
Posts: 4809
|
| Posted: Sun Apr 15, 2012 7:16 pm Post subject: |
|
|
| As I already said, the version of gtkhtml in Gnome 3.4 has a fix for this problem (you can check its git log). |
|
| Back to top |
|
|
lebel
n00b
Joined: 25 Aug 2004
Posts: 29
|
| Posted: Mon Apr 16, 2012 2:53 am Post subject: |
|
|
Yeah, I have the exact same problem with my current build of Gnome. Both gtkhtml and gnome-utils has the g_thread_init missing issue.
I guess I'll have to wait a bit still. |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Mon Apr 16, 2012 7:38 pm Post subject: |
|
|
Found the error: In the file components/editor/main.c in the gtkhtml package there is a line saying
| Code: | | g_thread_init (NULL); |
This line has to be changed to
then it compiles just fine. I guess in gnome-utils there is a similar problem. The Use of g_thread_init is deprecated and gtkhtml isn't actively developed anymore, so it has become old over the last years...
But another question: How do I tell portage that a package is already in the system if it isn't compiled by portage? |
|
| Back to top |
|
|
gorkypl
Guru
Joined: 04 Oct 2010
Posts: 440
Location: Kraków, PL
|
| Posted: Mon Apr 16, 2012 7:52 pm Post subject: |
|
|
| dansou90 wrote: | | How do I tell portage that a package is already in the system if it isn't compiled by portage? |
Put the name in /etc/portage/package.provided
_________________
BTW, TWM FTW! |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Mon Apr 16, 2012 8:28 pm Post subject: |
|
|
For your record: It had to be /etc/portage/profile/package.provided
Anyway, thanks for the direction! Now it is compiling again  Let's see if it will be ready today so I can use it in my presentation tomorrow... |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Tue Apr 17, 2012 12:50 pm Post subject: |
|
|
Now evolution doesn't find GTKHTML... see the configuration error:
| Code: | configure: error: Package requirements (libgtkhtml-4.0 >= 4.1.2) were not met:
No package 'libgtkhtml-4.0' found |
How do I have to change the configure file of evolution that it works? |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Tue Apr 17, 2012 5:09 pm Post subject: |
|
|
I think I should provide the configure file so you don't have to search for it...
http://ifile.it/sd5xyc0
Maybe someone figures out how to tell evolution that gtkhtml is in its place... |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Tue Apr 17, 2012 5:26 pm Post subject: |
|
|
| Nevermind... it was my mistake: installing a package using the ebuild commands configure, compile and install doesn't install the binaries and libs properly... at least not for me. So I had to go in the work directory of gtkhtml and to do a "make install" which did the job... and evolution compiles again |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Tue Apr 17, 2012 6:16 pm Post subject: |
|
|
| With the above fix, everything works fine! Now I have a working Gnome 3.2 environment... Thank you all for your great help! |
|
| Back to top |
|
|
MisterMagister
n00b
Joined: 28 Aug 2011
Posts: 9
|
| Posted: Mon Sep 03, 2012 10:02 pm Post subject: |
|
|
Sorry to resurrect an old thread, but I'm having this same issue and none of the fixes I've located in the forums are working for me. Man, Gnome is just a COMPLETE train wreck these days,isn't it?
Running an ~amd64 system with KDE 4.9 running great, and trying to emerge Gnome 2.32.1-r2 with Gnome 3 masked out using this package mask.
So I first tried to apply the patch above, but my patched gtkhtml won't compile. It won't even get out of the gate:
| Code: | gtkhtml-3.32.2 # make
make all-recursive
make[1]: Entering directory `/usr/src/gtkhtml-3.32.2'
Making all in a11y
make[2]: Entering directory `/usr/src/gtkhtml-3.32.2/a11y'
CC cell.lo
CC factory.lo
CC html.lo
CC hyperlink.lo
hyperlink.c:40:1: error: unknown type name 'G_CONST_RETURN'
hyperlink.c:40:29: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
hyperlink.c:41:1: error: unknown type name 'G_CONST_RETURN'
hyperlink.c:41:29: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
hyperlink.c: In function 'atk_action_interface_init':
hyperlink.c:85:27: error: 'html_a11y_hyper_link_get_description' undeclared (first use in this function)
hyperlink.c:85:27: note: each undeclared identifier is reported only once for each function it appears in
hyperlink.c:86:27: error: 'html_a11y_hyper_link_get_name' undeclared (first use in this function)
hyperlink.c: At top level:
hyperlink.c:190:1: error: unknown type name 'G_CONST_RETURN'
hyperlink.c:190:29: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
hyperlink.c:204:1: error: unknown type name 'G_CONST_RETURN'
hyperlink.c:204:29: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
make[2]: *** [hyperlink.lo] Error 1
make[2]: Leaving directory `/usr/src/gtkhtml-3.32.2/a11y'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/gtkhtml-3.32.2'
make: *** [all] Error 2 |
Then I tried to unmask a newer version of gtkhtml. I unmasked and emerged gtkhtml-4.4.4, but something in Gnome just INSISTS on pulling in 3.32.2. I've looked at the tree to try and see what's pulling it in, but I can't figure it out. Gnome will not accept the newer version.
So then I tried to mask glib-2.32 and use 2.30, but just like the other package something INSISTED on pulling in 2.32 and the whole thing choked because a required package was masked.
Finally, I remembered that I built Gnome 2.32 successfully on an AMD stable system recently, so I edited my make.conf and commented out the ACCEPT_KEYWORDS="~amd64" line and tried 'emerge gnome' again. This time it pulled in glib-2.30 (downgrading a couple of cups packages, but that's fine), but glib-2.30 won't compile.
| Code: | checking for LIBFFI... no
configure: error: in `/var/tmp/portage/dev-libs/glib-2.30.3/work/glib-2.30.3':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables LIBFFI_CFLAGS
and LIBFFI_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/dev-libs/glib-2.30.3/work/glib-2.30.3/config.log
* ERROR: dev-libs/glib-2.30.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 85: Called src_configure
* environment, line 6250: Called econf '--disable-xattr' '--disable-man' '--disable-gtk-doc' '--disable-fam' '--disable-selinux' '--enable-static' '--disable-dtrace' '--disable-systemtap' '--enable-regex' '--with-pcre=internal' '--with-threads=posix'
* phase-helpers.sh, line 467: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-libs/glib-2.30.3'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/glib-2.30.3'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/glib-2.30.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/glib-2.30.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/glib-2.30.3/work/glib-2.30.3'
* S: '/var/tmp/portage/dev-libs/glib-2.30.3/work/glib-2.30.3'
>>> Failed to emerge dev-libs/glib-2.30.3, Log file:
>>> '/var/tmp/portage/dev-libs/glib-2.30.3/temp/build.log'
* Messages for package dev-libs/glib-2.30.3:
* ERROR: dev-libs/glib-2.30.3 failed (configure phase):
* econf failed
*
* Call stack:
* ebuild.sh, line 85: Called src_configure
* environment, line 6250: Called econf '--disable-xattr' '--disable-man' '--disable-gtk-doc' '--disable-fam' '--disable-selinux' '--enable-static' '--disable-dtrace' '--disable-systemtap' '--enable-regex' '--with-pcre=internal' '--with-threads=posix'
* phase-helpers.sh, line 467: Called die
* The specific snippet of code:
* die "econf failed"
*
* If you need support, post the output of `emerge --info '=dev-libs/glib-2.30.3'`,
* the complete build log and the output of `emerge -pqv '=dev-libs/glib-2.30.3'`.
* The complete build log is located at '/var/tmp/portage/dev-libs/glib-2.30.3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/dev-libs/glib-2.30.3/temp/environment'.
* Working directory: '/var/tmp/portage/dev-libs/glib-2.30.3/work/glib-2.30.3'
* S: '/var/tmp/portage/dev-libs/glib-2.30.3/work/glib-2.30.3' |
Any help much appreciated, as I'm pretty well stuck and completely out of ideas here. |
|
| Back to top |
|
|
dansou90
n00b
Joined: 13 Apr 2012
Posts: 65
|
| Posted: Tue Sep 04, 2012 6:26 pm Post subject: |
|
|
Could you please post your config.log and your build.log of glib-2.30 and also the configure script itself? As it already says, maybe it is too old for the version of pkg-config you are runníng. Information about this would be helpful too.
By the way, your package mask doesn't mask Gnome 3.2, but Gnome 3.0 (there are only a few Gnome 3.2 packages at the top). The Gnome meta package masked is Gnome 3.0. So maybe you should adjust the version numbers there a bit, too.
I hope you got a few ideas from this.
Just one last thing: In this thread, I definitely made a big mistake when it comes to compiling packages without portage. This is very dangerous and can screw up your whole system. Finally, I ended up setting up a local overlayand putting the patches in there (There is a good tutorial for this, I currently don't remember the link, just search for it in the forums, I posted it in another thread). Doing this, you also get rid of the package.provided, as everything is controlled via portage as it should be. |
|
| Back to top |
|
|
|
Desktop Environments
