View previous topic :: View next topic |
Author |
Message |
toby1234 n00b
Joined: 28 Mar 2012 Posts: 4
|
Posted: Thu Mar 29, 2012 4:15 am Post subject: gentoo prefix problem: Failed to emerge app-arch/tar-1.26-r |
|
|
Hi Every1,
I am trying to build a minimal gentoo stage 2 with gcc development libraries and auto-configuration tools on three supercompute clusters (in order to be able to build other software with non-root privileges). I do the following:
wget https://github.com/npinto/gentoo-prefix-bootstrap/tarball/master
mv master prefix.tgz
tar zxvf prefix.tgz
then issue the commands
cd npinto-gentoo-prefix-bootstrap-6d62ddc
make install/stage2-gcc
The build/compiling starts fine until the following error message (below).
On cluster 1 the command cat /etc/version gives:
Linux version 2.6.18-194.17.4.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-4) #1 SMP Mon Oct 25 15:50:53 EDT 2010
On cluster 2 the command cat /etc/version gives:
Linux version 2.6.32.13-0.4-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP 2010-06-15 12:47:25 +0200
On cluster 3 the command cat /etc/version gives:
Linux version 2.6.18-128.7.1.el5 (brewbuilder@norob.fnal.gov) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Mon Aug 24 08:12:52 EDT 2009
On all three clusters I get the same error message as follows: What to do? Any help appreciated?
>>> Emerging (1 of 1) app-arch/tar-1.26-r1
>>> Failed to emerge app-arch/tar-1.26-r1, Log file:
>>> '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/build.log'
* Package: app-arch/tar-1.26-r1
* Repository: gentoo_prefix
* USE: amd64 bootstrap elibc_glibc kernel_linux prefix userland_GNU
* FEATURES: preserve-libs
* Applying tar-1.26-xattr.patch ...
[ ok ]
* Running eautoreconf in '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/work/tar-1.26' ...
* Running aclocal -I m4 ...
[ !! ]
* Failed Running aclocal !
*
* Include in your bugreport the contents of:
*
* /home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/aclocal.out
* ERROR: app-arch/tar-1.26-r1 failed (prepare phase):
* Failed Running aclocal !
*
* Call stack:
* ebuild.sh, line 85: Called src_prepare
* environment, line 2842: Called eautoreconf
* environment, line 781: Called eaclocal
* environment, line 699: Called autotools_run_tool '--at-m4flags' 'aclocal' '-I' 'm4'
* environment, line 550: Called die
* The specific snippet of code:
* die "Failed Running $1 !";
*
* If you need support, post the output of 'emerge --info =app-arch/tar-1.26-r1',
* the complete build log and the output of 'emerge -pqv =app-arch/tar-1.26-r1'.
* The complete build log is located at '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/build.log'.
* The ebuild environment file is located at '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/environment'.
* S: '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/work/tar-1.26'
* Messages for package app-arch/tar-1.26-r1:
* Failed Running aclocal !
*
* Include in your bugreport the contents of:
*
* /home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/aclocal.out
* ERROR: app-arch/tar-1.26-r1 failed (prepare phase):
* Failed Running aclocal !
*
* Call stack:
* ebuild.sh, line 85: Called src_prepare
* environment, line 2842: Called eautoreconf
* environment, line 781: Called eaclocal
* environment, line 699: Called autotools_run_tool '--at-m4flags' 'aclocal' '-I' 'm4'
* environment, line 550: Called die
* The specific snippet of code:
* die "Failed Running $1 !";
*
* If you need support, post the output of 'emerge --info =app-arch/tar-1.26-r1',
* the complete build log and the output of 'emerge -pqv =app-arch/tar-1.26-r1'.
* The complete build log is located at '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/build.log'.
* The ebuild environment file is located at '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/temp/environment'.
* S: '/home/tobiash/gentoo/var/tmp/portage/app-arch/tar-1.26-r1/work/tar-1.26'
make: *** [install/stage2-up-to-bison] Error 1 |
|
Back to top |
|
|
dol-sen Retired Dev
Joined: 30 Jun 2002 Posts: 2805 Location: Richmond, BC, Canada
|
Posted: Thu Mar 29, 2012 7:34 am Post subject: |
|
|
Might I suggest you join #gentoo-prefix on the freenode irc network. Your likely to get prefix specific help there easier. Also, if you prefer the forums, possibly just use one thread for all your initial install problems, that way you won't have to keep repeating info about your system so people can figure out what you need to do. It helps us to know what step you are at, etc.. _________________ Brian
Porthole, the Portage GUI frontend irc@freenode: #gentoo-guis, #porthole, Blog
layman, gentoolkit, CoreBuilder, esearch... |
|
Back to top |
|
|
dol-sen Retired Dev
Joined: 30 Jun 2002 Posts: 2805 Location: Richmond, BC, Canada
|
Posted: Thu Mar 29, 2012 2:06 pm Post subject: |
|
|
I didn't see that last night. If you are using someone else's bootstrap script or tarball, you will need to get support from them.
I am not very familiar with doing prefix installs. I do know I had trouble with tar, but the info in the solaris guide had me try the different version which worked. Also as the tree evolves and different versions of apps are available there are some new problems that come up in a prefix install that do not normally come up.
Also I would stick with one system, get that one installed then use your new knowledge to get the next one installed. _________________ Brian
Porthole, the Portage GUI frontend irc@freenode: #gentoo-guis, #porthole, Blog
layman, gentoolkit, CoreBuilder, esearch... |
|
Back to top |
|
|
oclinux n00b
Joined: 12 Jan 2011 Posts: 4
|
Posted: Mon Oct 01, 2012 6:56 pm Post subject: |
|
|
When running the prefix installer, change de MAKEOPTS to 1....the configuration and scripting in tar install have problems when MAKEOPTS>1.
hope taht helps |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|