Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
笔记本cpu风扇的问题
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index 中文 (Chinese)
View previous topic :: View next topic  
Author Message
pd1986
Guru
Guru


Joined: 19 Feb 2012
Posts: 404
Location: Paris

PostPosted: Mon Mar 12, 2012 10:11 am    Post subject: 笔记本cpu风扇的问题 Reply with quote

HELLO
我装完GENTOO后,CPU风扇工作不正常。情况如下:
用minimal stage3装完,开机启动ACPI,fan模块也加载了,但在CPU温度上升的时,风扇不会自动启动。即使升到90度也不转,再高的时候,CPU风扇会疯狂地转2秒钟,然后就停了,再过一会再狂转2秒又停了,不能持续工作。然而,在CPU温度下降的且通过85,75,65,55度的时候(用电风扇在旁边吹的),风扇才会自动启动且持续工作,并且也能自动调节。试过lm_sensors,可惜不支持,上面写"ITE IT8512E/F/G Super IO, driver to be written"。请问如何解决?谢谢
Back to top
View user's profile Send private message
EricHsu
Bodhisattva
Bodhisattva


Joined: 03 May 2004
Posts: 591
Location: Aragon Consulting Group, Beijing, China

PostPosted: Sun Mar 25, 2012 9:38 am    Post subject: Reply with quote

請提供機器品牌、型號等信息。
_________________
- http://nkbit.com
- http://twitter.com/xuyihua
Back to top
View user's profile Send private message
pd1986
Guru
Guru


Joined: 19 Feb 2012
Posts: 404
Location: Paris

PostPosted: Sun Mar 25, 2012 5:00 pm    Post subject: Reply with quote

EricHsu wrote:
請提供機器品牌、型號等信息。


多谢回复

我在电脑上也保存过不少相关的信息,但是我不知道在这里如何发附件,因此我在这列出主要信息,更多的信息,麻烦请去下面的地址,谢谢
https://bugzilla.kernel.org/show_bug.cgi?id=42946

目前的问题是,风扇开机后,温度上升时会不会自动开始工作。但当温度下降的时候,并且经过trip_point的时候,才会开始工作,并且也可以自动调节。
另外,可以手动让风扇开始工作。在"/sys/class/thermal/"里面手动赋值使风扇工作,但是不会根据温度自动调节转速。另外,休眠再唤醒也可以启动风扇,但也不能自动调节,效果与手动打开一样。同时,xfce4里面的power-manager无法读取cpu温度,里面只有电池一项。

Toshiba Portégé M901
kernel: 3.2.1-gentoo-r2
Desktop: xfce4.8

Quote:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
02:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev 01)
02:00.1 System peripheral: Ricoh Co Ltd Memory Stick Host Controller (rev 01)
02:00.2 System peripheral: Ricoh Co Ltd Device e852 (rev 01)
03:00.0 Network controller: Intel Corporation WiFi Link 5100
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
08:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series]
08:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]


Quote:
dmesg
0xb080-0xb09f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xb000-0xb01f]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xac00-0xac1f]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfddff400-0xfddff7ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883]
pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807]
pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483]
pci 0000:00:1f.2: reg 20: [io 0xb400-0xb41f]
pci 0000:00:1f.2: reg 24: [mem 0xfddff800-0xfddfffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:08:00.0: [1002:9553] type 0 class 0x000300
pci 0000:08:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:08:00.0: reg 14: [io 0xe000-0xe0ff]
pci 0000:08:00.0: reg 18: [mem 0xfebf0000-0xfebfffff]
pci 0000:08:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.1: [1002:aa38] type 0 class 0x000403
pci 0000:08:00.1: reg 10: [mem 0xfebec000-0xfebeffff]
pci 0000:08:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 08-08]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1180:e822] type 0 class 0x000805
pci 0000:02:00.0: reg 10: [mem 0xfdeffc00-0xfdeffcff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [1180:e230] type 0 class 0x000880
pci 0000:02:00.1: reg 10: [mem 0xfdeff800-0xfdeff8ff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:00.2: [1180:e852] type 0 class 0x000880
pci 0000:02:00.2: reg 10: [mem 0xfdeff400-0xfdeff4ff]
pci 0000:02:00.2: supports D1 D2
pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:03:00.0: [8086:4232] type 0 class 0x000280
pci 0000:03:00.0: reg 10: [mem 0xfdffe000-0xfdffffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-06]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xfe000000-0xfe9fffff]
pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcfefffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:07:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:07:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
pci 0000:07:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP1_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP2_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP6_._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PILG] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009ec00 - 000000000009ffff
reserve RAM buffer: 000000007fd90000 - 000000007fffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x002fffff]
pnp 00:00: [mem 0x00300000-0x7fffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x002fffff] could not be reserved
system 00:00: [mem 0x00300000-0x7fffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x80000000-0xffffffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0060]
pnp 00:03: [io 0x0064]
pnp 00:03: [irq 1]
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: [irq 12]
pnp 00:04: Plug and Play ACPI device, IDs AUI0300 SYN1d00 SYN0002 PNP0f13 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x0062]
pnp 00:08: [io 0x0066]
pnp 00:08: [io 0x0100-0x0103]
system 00:08: [io 0x0100-0x0103] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0044-0x005f]
pnp 00:0a: [io 0x0063]
pnp 00:0a: [io 0x0065]
pnp 00:0a: [io 0x0067-0x006f]
pnp 00:0a: [io 0x0072-0x0080]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: [io 0x0378-0x037f]
pnp 00:0a: [io 0x0400-0x041f]
pnp 00:0a: [io 0x0500-0x053f]
pnp 00:0a: [io 0x0800-0x087f]
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: [mem 0xfec00000-0xfec000ff]
pnp 00:0a: [mem 0xfed10000-0xfed13fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed30000-0xfed30fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xff800000-0xffffffff]
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x0378-0x037f] has been reserved
system 00:0a: [io 0x0400-0x041f] has been reserved
system 00:0a: [io 0x0500-0x053f] has been reserved
system 00:0a: [io 0x0800-0x087f] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed30000-0xfed30fff] has been reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xff800000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.1: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 08-08]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-06]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xfe000000-0xfe9fffff]
pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcfefffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: enabling device (0106 -> 0107)
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:08: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe9fffff]
pci_bus 0000:04: resource 2 [mem 0xcc000000-0xcfefffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:07: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x80000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:08:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1331936890.620:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
GFS2 installed
msgmni has been set to 4012
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddff900 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddff980 irq 45
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddffb00 irq 45
ata6: SATA max UDMA/133 abar m2048@0xfddff800 port 0xfddffb80 irq 45
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
lirc_dev: IR Remote Control driver registered, major 252
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR LIRC bridge handler initialized
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2012-03-16 22:28:11 UTC (1331936891)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: HL-DT-ST DVDRAM GU10N, MT04, max UDMA/133
ata5.00: configured for UDMA/133
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MT04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > sda4
sd 1:0:0:0: [sda] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input1
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input2
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:10.
Freeing unused kernel memory: 480k freed
udevd[706]: starting version 171
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
cfg80211: Calling CRDA to update world regulatory domain
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI: Fan [FAN0] (on)
ACPI: Fan [FAN1] (on)
ACPI: Fan [FAN2] (on)
ACPI: Fan [FAN3] (on)
ACPI: Fan [FAN4] (on)
ACPI: Fan [FAN5] (on)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
acpi device:07: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:04/LNXVIDEO:01/input/input7
ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfddff000
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT] (battery present)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfddff400
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:07:00.0: setting latency timer to 64
r8169 0000:07:00.0: irq 46 for MSI/MSI-X
r8169 0000:07:00.0: eth0: RTL8168d/8111d at 0xffffc90010400000, 00:26:18:5e:01:5f, XID 081000c0 IRQ 46
r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
usb 1-1: new high-speed USB device number 2 using ehci_hcd
Disabling lock debugging due to kernel taint
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
input: Toshiba input device as /devices/virtual/input/input8
Registered led device: toshiba::illumination
[fglrx] Maximum main memory to use for locked dma buffers: 1879 MBytes.
[fglrx] vendor: 1002 device: 9553 count: 1
[fglrx] ioport: bar 1, base 0xe000, size: 0x100
pci 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:08:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a880
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a480
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ac00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (0 C)
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 1-1: New USB device found, idVendor=04f2, idProduct=b128
usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 UVC WebCam
usb 1-1: Manufacturer: Chicony Electronics Co., Ltd.
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:03:00.0: setting latency timer to 64
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90010954000
iwlwifi 0000:03:00.0: HW Revision ID = 0x0
iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X
iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4
iwlwifi 0000:03:00.0: Device SKU: 0Xf0
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
snd_hda_intel 0000:08:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
snd_hda_intel 0000:08:00.1: irq 49 for MSI/MSI-X
snd_hda_intel 0000:08:00.1: setting latency timer to 64
iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692
Registered led device: phy0-led
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
usb 7-1: new full-speed USB device number 2 using uhci_hcd
usb 7-1: New USB device found, idVendor=08ff, idProduct=2550
usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-1: Product: Fingerprint Sensor
usb 7-2: new low-speed USB device number 3 using uhci_hcd
usb 7-2: New USB device found, idVendor=15d9, idProduct=0a4c
usb 7-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-2: Product: USB OPTICAL MOUSE
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input9
generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT4-fs (sda10): re-mounted. Opts: (null)
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): mounted filesystem with ordered data mode
uhci_hcd 0000:00:1d.0: PCI INT A disabled
uhci_hcd 0000:00:1d.2: PCI INT C disabled
ehci_hcd 0000:00:1d.7: PCI INT A disabled
ehci_hcd 0000:00:1d.7: PME# enabled
r8169 0000:07:00.0: PME# enabled
ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xfddff400-0xfddff7ff] (PCI address [0xfddff400-0xfddff7ff])
ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x10f)
ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
ehci_hcd 0000:00:1d.7: PME# disabled
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
wlan0: authenticate with 5c:33:8e:e6:40:0b (try 1)
wlan0: authenticated
wlan0: associate with 5c:33:8e:e6:40:0b (try 1)
wlan0: RX AssocResp from 5c:33:8e:e6:40:0b (capab=0x431 status=0 aid=1)
wlan0: associated
r8169 0000:07:00.0: PME# disabled
r8169 0000:07:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
r8169 0000:07:00.0: eth0: link down
[fglrx] ATIF platform detected with notification ID: 0x81
fglrx_pci 0000:08:00.0: irq 50 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 3114
[fglrx] Firegl kernel thread PID: 3115
[fglrx] Firegl kernel thread PID: 3116
[fglrx] IRQ 50 Enabled
[fglrx] Gart USWC size:628 M.
[fglrx] Gart cacheable size:246 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
ata2.00: configured for UDMA/133
ata2: EH complete
EXT4-fs (sda10): re-mounted. Opts: commit=0
wlan0: no IPv6 routers present
iwlwifi 0000:03:00.0: Tx aggregation enabled on ra = 5c:33:8e:e6:40:0b tid = 0
operapluginwrap[3417] general protection ip:7f8beded0cf0 sp:7fff79a976e0 error:0 in libgobject-2.0.so.0.3000.2[7f8bede9c000+4f000]
operapluginwrap[4584] general protection ip:7fc0c820ccf0 sp:7fffde8893c0 error:0 in libgobject-2.0.so.0.3000.2[7fc0c81d8000+4f000]
operapluginwrap[4675] general protection ip:7f50ec746cf0 sp:7fff699aee70 error:0 in libgobject-2.0.so.0.3000.2[7f50ec712000+4f000]
Back to top
View user's profile Send private message
pd1986
Guru
Guru


Joined: 19 Feb 2012
Posts: 404
Location: Paris

PostPosted: Sun Apr 08, 2012 12:52 pm    Post subject: Reply with quote

终于这个问题貌似是解决了。

我将其它的跟acpi有关的选项全都编译成built-in,再将fan编译成module, 然后启动时,风扇刚开始会停传,等加载到fan的module的时候,再重新开始工作。
但是我仍然没有找到任何工具可以读取到我的fan的状态,除了在terminal里,手动查看/sys/class/thermal/这里面
Back to top
View user's profile Send private message
pd1986
Guru
Guru


Joined: 19 Feb 2012
Posts: 404
Location: Paris

PostPosted: Sun May 27, 2012 8:00 pm    Post subject: Reply with quote

发现这个问题还是没有解决。开机后风扇以最低速转,然后就不会自动调节了。必须在高温状态下手动激活后,等待温度自动下降到trip point时,风扇减速,然后就可以自动调节了。
请问怎么解决?有没有可以手动启动自己调功能?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index 中文 (Chinese) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum