Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
mdadm 3.1.4 + imsm + kernel 3.0.6 root read only problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Thu Dec 01, 2011 10:18 pm    Post subject: mdadm 3.1.4 + imsm + kernel 3.0.6 root read only problem Reply with quote

Hello, i have problem with root fs mounted read only. You can see problem in screenshots.
Thank you.

System: Hardened Gentoo, AMD64, multilib
Config: (grabbed from livecd for initial):
Kernel build: genkernel

Disks configuration: IMSM raid-1 via mdadm
md126
md126p1 - boot - ext4
md126p2 - extended
md126p5 - root - ext4
md126p6 - not used
md126p7 - not used
md126p8 - not used

blkid:
Code:

/dev/md126p1: UUID="155f5f49-ccb9-44fc-9a1a-2d713644bfc7" TYPE="ext4"
/dev/md126p5: UUID="06c4309a-88d3-48b3-afbd-be8a724d65f8" TYPE="ext4"


grub config:
Code:

default 0
timeout 10
title Gentoo Linux
root (hd0,0)
kernel /kernel-genkernel-x86_64-3.0.6-gentoo \
        ro logo.nologo domdadm nodmraid \
        vga=789 video=vesafb:mtrr:3,ywrap \
        console=tty1 quiet \
        root=/dev/ram0 init=/linuxrc ramdisk=8192 \
        rootfstype=ext4 \
        real_root=UUID=06c4309a-88d3-48b3-afbd-be8a724d65f8
initrd /initramfs-genkernel-x86_64-3.0.6-gentoo
quiet


fstab
Code:

livecd / # nano /etc/fstab
UUID="155f5f49-ccb9-44fc-9a1a-2d713644bfc7"     /boot           ext4    noauto,noatime  0 1
UUID="06c4309a-88d3-48b3-afbd-be8a724d65f8"     /               ext4    noatime         0 1


files
Code:

livecd gentoo # wget http://mirror.mcs.anl.gov/pub/gentoo/releases/amd64/autobuilds/current-stage3-amd64-hardened+nomultilib/stage3-amd64-hardened-20110625.tar.bz2
livecd gentoo # wget http://mirror.mcs.anl.gov/pub/gentoo/releases/snapshots/current/portage-latest.tar.bz2


dmesg:
Code:

Linux version 3.0.6-gentoo (root@livecd) (gcc version 4.4.5 (Gentoo Hardened 4.4.5 p1.2, pie-0.4.5) ) #1 SMP Thu Dec 1 01:28:15 EST 2011
Command line: ro logo.nologo domdadm nodmraid   vga=789 video=vesafb:mtrr:3,ywrap   console=tty1 quiet   root=/dev/ram0 init=/linuxrc ramdisk=8192   rootfstype=ext4   real_root=UUID=06c4309a-88d3-48b3-afbd-be8a724d65f8
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000094400 (usable)
 BIOS-e820: 0000000000094400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf417000 (usable)
 BIOS-e820: 00000000bf417000 - 00000000bf41f000 (ACPI data)
 BIOS-e820: 00000000bf41f000 - 00000000bf467000 (ACPI NVS)
 BIOS-e820: 00000000bf467000 - 00000000bf46e000 (usable)
 BIOS-e820: 00000000bf46e000 - 00000000bf483000 (reserved)
 BIOS-e820: 00000000bf483000 - 00000000bf484000 (ACPI NVS)
 BIOS-e820: 00000000bf484000 - 00000000bf495000 (reserved)
 BIOS-e820: 00000000bf495000 - 00000000bf498000 (ACPI NVS)
 BIOS-e820: 00000000bf498000 - 00000000bf4b2000 (reserved)
 BIOS-e820: 00000000bf4b2000 - 00000000bf4b4000 (usable)
 BIOS-e820: 00000000bf4b4000 - 00000000bf508000 (reserved)
 BIOS-e820: 00000000bf508000 - 00000000bf512000 (ACPI NVS)
 BIOS-e820: 00000000bf512000 - 00000000bf537000 (reserved)
 BIOS-e820: 00000000bf537000 - 00000000bf57a000 (ACPI NVS)
 BIOS-e820: 00000000bf57a000 - 00000000bf800000 (usable)
 BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 4.6.4 04/15/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FC0000000 write-back
  2 base 0C0000000 mask FC0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fce10] fce10
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000092000] 92000 size 8192
init_memory_mapping: 0000000000000000-00000000bf800000
 0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ bf7fc000-bf800000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 13fffa000-140000000
RAMDISK: 37b91000 - 37ff0000
ACPI: RSDP 00000000000f0450 00024 (v02 SYSMAX)
ACPI: XSDT 00000000bf417080 0007C (v01 SYSMAX SYXSUKIT 00000001 AMI  00010013)
ACPI: FACP 00000000bf41d9b8 000F4 (v04 SYSMAX SYXSUKIT 00000001 AMI  00010013)
ACPI: DSDT 00000000bf417188 0682F (v02 SYSMAX SYXSUKIT 00000000 INTL 20051117)
ACPI: FACS 00000000bf50ff80 00040
ACPI: APIC 00000000bf41dab0 00072 (v03 SYSMAX SYXSUKIT 00000001 AMI  00010013)
ACPI: SSDT 00000000bf41db28 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf41dc30 0003C (v01 SYSMAX SYXSUKIT 00000001 MSFT 00000097)
ACPI: SLIC 00000000bf41dc70 00176 (v01 SYSMAX SYXSUKIT 00000001 AMI  00010013)
ACPI: HPET 00000000bf41dde8 00038 (v01 SYSMAX SYXSUKIT 00000001 AMI. 00000004)
ACPI: SPMI 00000000bf41de20 00040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
ACPI: EINJ 00000000bf41de60 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 00000000bf41df90 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 00000000bf41e1a0 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 00000000bf41e248 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000010 -> 0x00000094
    0: 0x00000100 -> 0x000bf417
    0: 0x000bf467 -> 0x000bf46e
    0: 0x000bf4b2 -> 0x000bf4b4
    0: 0x000bf57a -> 0x000bf800
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1046058
  DMA zone: 56 pages used for memmap
  DMA zone: 2 pages reserved
  DMA zone: 3914 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 765662 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88013fc00000 s75968 r8192 d22336 u524288
pcpu-alloc: s75968 r8192 d22336 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1028136
Kernel command line: ro logo.nologo domdadm nodmraid   vga=789 video=vesafb:mtrr:3,ywrap   console=tty1 quiet   root=/dev/ram0 init=/linuxrc ramdisk=8192   rootfstype=ext4   real_root=UUID=06c4309a-88d3-48b3-afbd-be8a724d65f8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 4041640k/5242880k available (4056k kernel code, 1058648k absent, 142592k reserved, 2957k data, 528k init)
Hierarchical RCU implementation.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty1] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3092.912 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.82 BogoMIPS (lpj=30929120)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110413
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 92000
 #2
smpboot cpu 2: start_ip = 92000
 #3 Ok.
smpboot cpu 3: start_ip = 92000
Brought up 4 CPUs
Total of 4 processors activated (24743.35 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf509f18 00088 (v01    AMI      CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00088 (v01    AMI      CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfe7fffff]
pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.1: [8086:0105] type 1 class 0x000604
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfba00000-0xfba1ffff]
pci 0000:00:19.0: reg 14: [mem 0xfba24000-0xfba24fff]
pci 0000:00:19.0: reg 18: [io  0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfba23000-0xfba233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfba22000-0xfba223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:1c52] type 0 class 0x000601
pci 0000:00:1f.2: [8086:2822] type 0 class 0x000104
pci 0000:00:1f.2: reg 10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 20: [io  0xf000-0xf01f]
pci 0000:00:1f.2: reg 24: [mem 0xfba21000-0xfba217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfba20000-0xfba200ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x1180-0x119f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: [8086:10d3] type 0 class 0x000200
pci 0000:04:00.0: reg 10: [mem 0xfb900000-0xfb91ffff]
pci 0000:04:00.0: reg 18: [io  0xe000-0xe01f]
pci 0000:04:00.0: reg 1c: [mem 0xfb920000-0xfb923fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.4:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:03.0: [102b:0532] type 0 class 0x000300
pci 0000:05:03.0: reg 10: [mem 0xfe000000-0xfe7fffff pref]
pci 0000:05:03.0: reg 14: [mem 0xfb800000-0xfb803fff]
pci 0000:05:03.0: reg 18: [mem 0xfb000000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfe000000-0xfe7fffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfe7fffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
vgaarb: device added: PCI:0000:05:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:03.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000094400 - 000000000009ffff
reserve RAM buffer: 00000000bf417000 - 00000000bfffffff
reserve RAM buffer: 00000000bf46e000 - 00000000bfffffff
reserve RAM buffer: 00000000bf4b4000 - 00000000bfffffff
reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x03af window]
pnp 00:00: [io  0x03e0-0x0cf7 window]
pnp 00:00: [io  0x03b0-0x03df window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xf0000000-0xfe7fffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed10000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x0010-0x001f]
pnp 00:05: [io  0x0022-0x003f]
pnp 00:05: [io  0x0044-0x005f]
pnp 00:05: [io  0x0062-0x0063]
pnp 00:05: [io  0x0065-0x006f]
pnp 00:05: [io  0x0072-0x007f]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0084-0x0086]
pnp 00:05: [io  0x0088]
pnp 00:05: [io  0x008c-0x008e]
pnp 00:05: [io  0x0090-0x009f]
pnp 00:05: [io  0x00a2-0x00bf]
pnp 00:05: [io  0x00e0-0x00ef]
pnp 00:05: [io  0x04d0-0x04d1]
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0a00-0x0a1f]
pnp 00:07: [io  0x0a30-0x0a3f]
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
system 00:07: [io  0x0a00-0x0a1f] has been reserved
system 00:07: [io  0x0a30-0x0a3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:0a: [io  0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io  0x02f8-0x02ff]
pnp 00:0b: [irq 3]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0b00-0x0b7f]
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
system 00:0c: [io  0x0b00-0x0b7f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [io  0x0400-0x0453]
pnp 00:0d: [io  0x0458-0x047f]
pnp 00:0d: [io  0x1180-0x119f]
pnp 00:0d: [io  0x0500-0x057f]
pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0d: [mem 0xfec00000-0xfecfffff]
pnp 00:0d: [mem 0xfed08000-0xfed08fff]
pnp 00:0d: [mem 0xff000000-0xffffffff]
system 00:0d: [io  0x0400-0x0453] has been reserved
system 00:0d: [io  0x0458-0x047f] has been reserved
system 00:0d: [io  0x1180-0x119f] has been reserved
system 00:0d: [io  0x0500-0x057f] has been reserved
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0d: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0e: [io  0x0454-0x0457]
system 00:0e: [io  0x0454-0x0457] has been reserved
system 00:0e: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0f: [mem 0xfed00000-0xfed003ff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem disabled]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:01.1: PCI bridge to [bus 02-02]
pci 0000:00:01.1:   bridge window [io  disabled]
pci 0000:00:01.1:   bridge window [mem disabled]
pci 0000:00:01.1:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [mem disabled]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 04-04]
pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.4:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.4:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfe000000-0xfe7fffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfe7fffff]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:05: resource 1 [mem 0xfb000000-0xfb8fffff]
pci_bus 0000:05: resource 2 [mem 0xfe000000-0xfe7fffff 64bit pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x03af]
pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:05: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:05: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 10 [mem 0xf0000000-0xfe7fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:05:03.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4476k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800bb417000 - ffff8800bf417000
software IO TLB at phys 0xbb417000 - 0xbf417000
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.30 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 7902
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: setting latency timer to 64
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
vesafb: mode is 800x600x32, linelength=3200, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
mtrr: type mismatch for fe000000,800000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,400000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,200000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,100000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,80000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,40000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,20000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,10000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,8000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,4000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,2000 old: write-back new: write-combining
mtrr: type mismatch for fe000000,1000 old: write-back new: write-combining
vesafb: framebuffer at 0xfe000000, mapped to 0xffffc90010100000, using 3750k, total 8192k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ioatdma: Intel(R) QuickData Technology Driver 4.00
XENFS: not registering filesystem on non-xen platform
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
st: Version 20101219, fixed bufsize 32768, s/g segs 256
SCSI Media Changer driver v0.25
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.8
aoe: AoE v47 initialised.
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Freeing unused kernel memory: 528k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 20k freed
Freeing unused kernel memory: 656k freed
libata version 3.00 loaded.
Refined TSC clocksource calibration: 3092.974 MHz.
Switching to clocksource tsc
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21380 irq 42
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6.00: ATAPI: Slimtype DVD A  DS8A5S, WP56, max UDMA/100
ata6.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: WDC WD5003ABYX-01WERA0, 01.01S01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5003ABYX-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM            Slimtype DVD A  DS8A5S    WP56 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 5:0:0:0: Attached scsi generic sg2 type 5
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.19
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.19
Fusion MPT FC Host driver 3.04.19
Fusion MPT SAS Host driver 3.04.19
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-7[28000]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
QLogic Fibre Channel HBA Driver: 8.03.07.03-k
Emulex LightPulse Fibre Channel SCSI driver 8.3.23
Copyright(c) 2004-2009 Emulex.  All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfba23000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfba22000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
usb 2-1.2: new full speed USB device number 3 using ehci_hcd
md: raid0 personality registered for level 0
usb 2-1.2: New USB device found, idVendor=03f0, idProduct=010c
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: Multimedia Keyboard Hub
usb 2-1.2: Manufacturer: HP
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 3 ports detected
md: raid1 personality registered for level 1
raid6: int64x1   3307 MB/s
usb 2-1.2.1: new full speed USB device number 4 using ehci_hcd
usb 2-1.2.1: New USB device found, idVendor=03f0, idProduct=020c
usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2.1: Product: Multimedia Keyboard Hub
usb 2-1.2.1: Manufacturer: HP
input: HP Multimedia Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input0
generic-usb 0003:03F0:020C.0001: input,hidraw0: USB HID v1.00 Keyboard [HP Multimedia Keyboard Hub] on usb-0000:00:1d.0-1.2.1/input0
input: HP Multimedia Keyboard Hub as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.1/input/input1
generic-usb 0003:03F0:020C.0002: input,hiddev0,hidraw1: USB HID v1.00 Device [HP Multimedia Keyboard Hub] on usb-0000:00:1d.0-1.2.1/input1
raid6: int64x2   3238 MB/s
raid6: int64x4   2978 MB/s
raid6: int64x8   2310 MB/s
raid6: sse2x1    8381 MB/s
raid6: sse2x2   10175 MB/s
raid6: sse2x4   11835 MB/s
raid6: using algorithm sse2x4 (11835 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
   generic_sse: 13824.800 MB/sec
xor: using function: generic_sse (13824.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded
JFS: nTxBlock = 8192, nTxLock = 65536
fuse init (API version 7.16)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
md: md127 stopped.
md: bind<sda>
md: bind<sdb>
md: md126 stopped.
md: bind<sdb>
md: bind<sda>
bio: create slab <bio-1> at 1
md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 500104691712
mdmon[15403] general protection ip:400534 sp:7ff8cb2284f8 error:0 in mdmon[400000+e1000]
 md126: p1 p2 < p5 p6 p7 p8 >
EXT4-fs (md126p5): mounted filesystem with ordered data mode. Opts: (null)
udev[15611]: starting version 164
e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Real Time Clock Driver v1.12b
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:27:f2:d7
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:04:00.0: Disabling ASPM L0s
e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:04:00.0: setting latency timer to 64
e1000e 0000:04:00.0: irq 44 for MSI/MSI-X
e1000e 0000:04:00.0: irq 45 for MSI/MSI-X
e1000e 0000:04:00.0: irq 46 for MSI/MSI-X
e1000e 0000:04:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:27:f2:d6
e1000e 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:04:00.0: eth1: 10/100 speed: disabling TSO
usb 2-1.3: new high speed USB device number 5 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=090c, idProduct=6200
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: Generic USB2.0 card
usb 2-1.3: Manufacturer: Silicon Motion, Inc.
usb 2-1.3: SerialNumber: 12345678901234567890
scsi6 : usb-storage 2-1.3:1.0
scsi 6:0:0:0: Direct-Access     Generic  USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] 7716864 512-byte logical blocks: (3.95 GB/3.67 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 4b 00 00 08
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk


Screenshots:
http://tinypic.com/r/xo1pnq/5
http://tinypic.com/r/50p0kj/5


Last edited by sormy on Fri Dec 02, 2011 8:04 pm; edited 1 time in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31991
Location: 56N 3W

PostPosted: Thu Dec 01, 2011 10:51 pm    Post subject: Reply with quote

sormy,

Take the ro option out of your grub.conf
Its not needed as root is always mounted ro until ckroot has been run, after that passes, root is remounted rw.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Fri Dec 02, 2011 3:58 pm    Post subject: Reply with quote

NeddySeagoon, done but still have read-only root problem.
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Fri Dec 02, 2011 4:00 pm    Post subject: Reply with quote

Code:

md126: detected capacity change from 0 to 500104691712
 mdmon[15403] general protection ip:400534 sp:7ff8cb2284f8 error:0 in mdmon[400000+e1000]

May be this causes problem, but i didn't found any information about this kind of error.
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Fri Dec 02, 2011 7:13 pm    Post subject: Reply with quote

I found that all works correctly when I boot from gentoo minimal livecd:
Code:

md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 500104691712
 md126: p1 p2 < p5 p6 p7 p8 >
md: md126 switched to read-write mode.


But when i'm booting from the same .config kernel (copied from livecd) from hdd:
Code:

md/raid1:md126: active with 2 out of 2 mirrors
md126: detected capacity change from 0 to 500104691712
mdmon[15403] general protection ip:400534 sp:7ff8cb2284f8 error:0 in mdmon[400000+e1000]
 md126: p1 p2 < p5 p6 p7 p8 >
EXT4-fs (md126p5): mounted filesystem with ordered data mode. Opts: (null)


PS: raid1 array in normal state:
Code:

livecd ~ # cat /proc/mdstat
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md126 : active raid1 sda[1] sdb[0]
      488383488 blocks super external:/md127/0 [2/2] [UU]

md127 : inactive sdb[1](S) sda[0](S)
      4514 blocks super external:imsm

unused devices: <none>
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Fri Dec 02, 2011 7:50 pm    Post subject: Reply with quote

tried mdadm as static - nothing...
i have no idea why livecd mdadm works without general protection in mdmon
how to dump mdmon stack?
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Fri Dec 02, 2011 9:39 pm    Post subject: Reply with quote

tried mdmon ~3.1.5 - same result
hmm why livecd works different from real system kernel?
same kernel, same mdadm, same genkernel, same kernel config, same raid autodetect...
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Fri Dec 02, 2011 11:06 pm    Post subject: Reply with quote

solution so simple...

add to kernel params: scandelay=1
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Sat Dec 03, 2011 12:47 am    Post subject: Reply with quote

hmmm, not works, i'm just forgot domdadm and system started without raid.

question still opened!
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Mon Dec 05, 2011 2:42 am    Post subject: Reply with quote

i copied gentoo/gentoo.igz and modules from minimal install disk...
and it works!!!

I have no idea why fresh build kernel and mdadm not works correctly:
Code:

CFLAGS="-O2 -pipe -march=native"
CXXFLAGS="${CFLAGS}"
CHOST="x86_64-pc-linux-gnu"
USE="unicode"
MAKEOPTS="-j5"
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Mon Dec 05, 2011 6:42 pm    Post subject: Reply with quote

Where can I find official minimal cd build script?
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31991
Location: 56N 3W

PostPosted: Mon Dec 05, 2011 8:16 pm    Post subject: Reply with quote

sormy,

The CDs are made with a tool called catalyst.

I'm not sure if
Code:
emerge catalyst
also provides the build scripts to build the liveCDs.
The scripts are certianly available.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Mon Dec 05, 2011 8:18 pm    Post subject: Reply with quote

Finally...

Problem in code generated by genkernel only for mdadm.
I replaced mdadm/mdmon by livecd version from ramdisk image.

Now i can rebuild kernel, but need to patch mdadm/mdmon in ramdisk after every build...

Still looking for better solution...

PS: it seems like gcc code optimization bug...
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31991
Location: 56N 3W

PostPosted: Mon Dec 05, 2011 8:21 pm    Post subject: Reply with quote

sormy,

Genkernel is widely regarded as a part of the problem, not a part of the solution.

Build your kernel by hand, build your initrd by hand. I can post some links if you like.
Its only time consuming the fisrt time.

Oh, and go to bugs.gentoo.org and file a bug about genkernel.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Mon Dec 05, 2011 8:41 pm    Post subject: Reply with quote

NeddySeagoon, thanks for your help.

Yes, I undestand. There is no problems with kernel. Only with mdadm.
Both build of mdadm not works for me: from genkernel and USE="static" emerge mdadm.
Not works only for imsm!

But livecd mdadm in initramdisk works with no errors!!!

Now i'm using ramdisk overlay great feature of genkernel to not forget about replacing mdadm/mdmon in ramdisk by livecd's versions.

Hmm... How can i detect which gcc version was used to build mdadm for livecd and which params was used?

I know, I can build mdadm manually by different versions of gcc and with different optimization flags and finally locate problem... But it's so time consumption...
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 31991
Location: 56N 3W

PostPosted: Mon Dec 05, 2011 9:05 pm    Post subject: Reply with quote

sormy,

The liveCD is built with the current stable portage tree at the time of the build, so its gcc build version varies with time.
mdadm only take the static USE flag and that must be on for use in an initrd as no libraries or dynamic linker will be available.

If you mean what gcc options were used to build mdadm on the liveCD, you will need to ask the release engineering team.
The best way to reach them is an email to their alias, or ask in #gentoo-releng on irc.freenode.net
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
sormy
n00b
n00b


Joined: 01 Dec 2011
Posts: 24

PostPosted: Thu Dec 08, 2011 7:34 pm    Post subject: Reply with quote

it seems like a problem from using too old stage3...

Hardened profile updated not so often as regular profiles.

I don't know which action exactly helps, but
I have done two actions:
1) switched to gcc 4.5 from 4.4 (in current hardened stage 3 default is 4.4)
2) re emerge world, clear genkernel cache, genkernel all

Thank you for help. May be this topic will help to someone.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum