View previous topic :: View next topic |
Author |
Message |
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Sat Nov 05, 2011 1:53 pm Post subject: [SOLVED] Gnome 3 wont start |
|
|
Hello everybody
I recently just rebuilt my gentoo system from scratch. I installed gnome 3 using the instructions given in this link
http://oleeekchoff.blogspot.com/2011/10/gnome-3-on-gentoo.html
My problem is that I can boot up and log in fine but when I log in I get stuck with only the default background showing, nothing else. Sometimes there will be what looks like a bar flashing at the top for a split second and it won't show again. Any suggestions? Logs I should check? is there one central gnome log that might have an error in it? there's nothing about gnome in /var/log
Last bit of Xorg.0.log
Code: |
[ 23.340] Option "XkbLayout" "us"
[ 23.340] Option "_source" "server/udev"
[ 23.340] Option "name" "HID 0a5c:4502"
[ 23.340] Option "path" "/dev/input/event6"
[ 23.340] Option "device" "/dev/input/event6"
[ 23.340] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.0/input/input6/event6"
[ 23.340] Option "driver" "evdev"
[ 23.340] (**) HID 0a5c:4502: always reports core events
[ 23.340] (**) HID 0a5c:4502: Device: "/dev/input/event6"
[ 23.340] (--) HID 0a5c:4502: Found keys
[ 23.340] (II) HID 0a5c:4502: Configuring as keyboard
[ 23.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1:1.0/input/input6/event6"
[ 23.340] (II) XINPUT: Adding extended input device "HID 0a5c:4502" (type: KEYBOARD)
[ 23.340] (**) Option "xkb_rules" "evdev"
[ 23.340] (**) Option "xkb_model" "evdev"
[ 23.340] (**) Option "xkb_layout" "us"
[ 23.340] (II) XKB: Reusing cached keymap
[ 23.341] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/event7)
[ 23.341] (**) HID 0a5c:4503: Applying InputClass "evdev pointer catchall"
[ 23.341] (II) Using input driver 'evdev' for 'HID 0a5c:4503'
[ 23.341] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.341] Option "XkbRules" "evdev"
[ 23.341] Option "XkbModel" "evdev"
[ 23.341] Option "XkbLayout" "us"
[ 23.341] Option "_source" "server/udev"
[ 23.341] Option "name" "HID 0a5c:4503"
[ 23.341] Option "path" "/dev/input/event7"
[ 23.341] Option "device" "/dev/input/event7"
[ 23.341] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input7/event7"
[ 23.341] Option "driver" "evdev"
[ 23.341] (**) HID 0a5c:4503: always reports core events
[ 23.341] (**) HID 0a5c:4503: Device: "/dev/input/event7"
[ 23.341] (--) HID 0a5c:4503: Found 3 mouse buttons
[ 23.341] (--) HID 0a5c:4503: Found relative axes
[ 23.341] (--) HID 0a5c:4503: Found x and y relative axes
[ 23.341] (II) HID 0a5c:4503: Configuring as mouse
[ 23.341] (**) HID 0a5c:4503: YAxisMapping: buttons 4 and 5
[ 23.341] (**) HID 0a5c:4503: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input7/event7"
[ 23.341] (II) XINPUT: Adding extended input device "HID 0a5c:4503" (type: MOUSE)
[ 23.341] (II) HID 0a5c:4503: initialized for relative axes.
[ 23.341] (**) HID 0a5c:4503: (accel) keeping acceleration scheme 1
[ 23.341] (**) HID 0a5c:4503: (accel) acceleration profile 0
[ 23.341] (**) HID 0a5c:4503: (accel) acceleration factor: 2.000
[ 23.341] (**) HID 0a5c:4503: (accel) acceleration threshold: 4
[ 23.341] (II) config/udev: Adding input device HID 0a5c:4503 (/dev/input/mouse1)
[ 23.341] (II) No input driver/identifier specified (ignoring)
|
dmesg
Code: |
[ 3.591317] usb 2-1.8.2: configuration #1 chosen from 1 choice
[ 3.591496] usb 2-1.8.2: adding 2-1.8.2:1.0 (config #1, interface 0)
[ 3.591699] usbhid 2-1.8.2:1.0: usb_probe_interface
[ 3.591704] usbhid 2-1.8.2:1.0: usb_probe_interface - got id
[ 3.594362] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/input/input7
[ 3.594736] generic-usb 0003:0A5C:4503.0006: input,hidraw5: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.8.2/input0
[ 3.594747] drivers/usb/core/inode.c: creating file '009'
[ 3.594759] hub 2-1.8:1.0: 396mA power budget left
[ 3.594957] hub 2-1.8:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 3.657027] usb 2-1.8.3: new full speed USB device number 10 using ehci_hcd
[ 3.733525] usb 2-1.8.3: skipped 1 descriptor after interface
[ 3.733723] usb 2-1.8.3: default language 0x0409
[ 3.734739] usb 2-1.8.3: udev 10, busnum 2, minor = 137
[ 3.734743] usb 2-1.8.3: New USB device found, idVendor=0a5c, idProduct=2148
[ 3.734748] usb 2-1.8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.734752] usb 2-1.8.3: Product: BCM92046DG-CL1ROM
[ 3.734756] usb 2-1.8.3: Manufacturer: Broadcom Corp
[ 3.734759] usb 2-1.8.3: SerialNumber: 000272AF5883
[ 3.734839] usb 2-1.8.3: usb_probe_device
[ 3.734843] usb 2-1.8.3: configuration #1 chosen from 1 choice
[ 3.735023] usb 2-1.8.3: adding 2-1.8.3:1.0 (config #1, interface 0)
[ 3.735116] usb 2-1.8.3: adding 2-1.8.3:1.1 (config #1, interface 1)
[ 3.735157] usb 2-1.8.3: adding 2-1.8.3:1.2 (config #1, interface 2)
[ 3.735188] usb 2-1.8.3: adding 2-1.8.3:1.3 (config #1, interface 3)
[ 3.735210] drivers/usb/core/inode.c: creating file '010'
[ 3.735220] hub 2-1.8:1.0: 394mA power budget left
[ 3.735222] hub 2-1.8:1.0: state 7 ports 3 chg 0000 evt 0004
[ 4.136756] udev[1298]: starting version 164
[ 4.506331] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.506348] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.506467] r8169 0000:03:00.0: setting latency timer to 64
[ 4.506517] r8169 0000:03:00.0: irq 53 for MSI/MSI-X
[ 4.506902] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90000c7e000, bc:ae:c5:5d:cd:45, XID 083000c0 IRQ 53
[ 4.785245] skge 0000:0b:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.785432] skge: 1.13 addr 0xf7ffc000 irq 17 chip Yukon-Lite rev 9
[ 4.785868] skge 0000:0b:02.0: eth1: addr 5c:d9:98:0a:28:ce
[ 5.632257] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.632489] HDA Intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[ 5.632511] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.022432] nvidia: module license 'NVIDIA' taints kernel.
[ 7.022435] Disabling lock debugging due to kernel taint
[ 7.530701] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.530709] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.530713] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.531220] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.09.07 Wed Jun 8 14:16:46 PDT 2011
[ 8.300755] EXT3-fs (sda7): using internal journal
[ 8.541378] fuse init (API version 7.16)
|
Last edited by cyberpirate on Sun Nov 20, 2011 6:07 pm; edited 1 time in total |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Sat Nov 05, 2011 3:46 pm Post subject: |
|
|
Hi cyberpirate,
I installed Gnome-3.2 from yesterday to today. Its works!
If a problem came up I used
Code: | lafilefixer --justfixit |
and I need in /etc/portage/package.keywords/
gnome3-more.keywords wrote: |
dev-lang/spidermonkey
media-libs/gupnp-dlna
net-wireless/wpa_supplicant
x11-themes/gtk-engines
|
and in /etc/portage/package.use
gnome3-more.use wrote: |
net-dns/avahi gtk3
net-misc/curl ssl -nss -gnutls
|
A other problem are the applets. I had to deinstall Networkmanager an his dependencis and a lot more.
Aften installing Gnome3.2 is finished I installed Networkmanager, nm-applet, cairo-dock. And its works fine.
Thanks to the developers! Great work!
Ma _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Sun Nov 06, 2011 5:58 pm Post subject: |
|
|
Did everything you said, no effects. |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Sun Nov 06, 2011 9:52 pm Post subject: |
|
|
bad
I use a radeon card with the propiretäre driver.
If you use a Intel card look to the many threads in this forum.
Ma
ps.
Did you
etc-update? env-update? source /etc/profile?
and last
delete, or mv all .config .locale dirs in your /home-dir and restart? _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Mon Nov 07, 2011 11:53 am Post subject: |
|
|
I use the nvidia gts 250 with the drivers off portage, it worked fine in gnome 2. And instead of etc-update etc. I rebooted and instead of deleting all the config files I moved my home directory and made a new user
do you really think its a graphics issue? The graphics seem to be fine it's just that the desktop environment isn't loading |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Mon Nov 07, 2011 3:04 pm Post subject: |
|
|
cyberpirate wrote: |
do you really think its a graphics issue?... |
No, not really. It was only one thought.
In the meantime I had substantial problems with the start (many times like yours) and the sound.
Current is the sound there, other times not there. I run a emerge -e system and controlled the authorizations with this thread --> https://forums.gentoo.org/viewtopic-t-858965-postdays-0-postorder-asc-start-0.html.
If a problem arises, I must so often start again until it works. If I made a action, sometimes the screen flashes.
3.2 is still incorrectly.
I use xdm with gdm. My next plan is to start with .xinitrc
echo "exec gnome-session" > ~/.xinitrc
and
sed -i '1i\export XDG_MENU_PREFIX=gnome-' ~/.xinitrc
I try it now.
Ma _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Mon Nov 07, 2011 11:23 pm Post subject: |
|
|
Quote: |
echo "exec gnome-session" > ~/.xinitrc
and
sed -i '1i\export XDG_MENU_PREFIX=gnome-' ~/.xinitrc
|
Did this and it didn't seem to improve my situation, but the black bar that flashes once at the top of the screen was bigger and more noticeable now, if it counts for anything, also your link is broken
EDIT:
hold the phone, I just found a file in my home directory that may help
~/.xsession-errors
Code: |
/etc/gdm/Xsession: Beginning session setup...
localuser:cyberpirate being added to access control list
which: no keychain in (/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin)
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/dbus-launch --exit-with-session /usr/bin/ssh-agent -- gnome-session
gnome-session[2455]: WARNING: Session 'gnome' runnable check failed: Exited with code 1
GNOME_KEYRING_CONTROL=/tmp/keyring-yBlitG
SSH_AUTH_SOCK=/tmp/keyring-yBlitG/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-yBlitG
SSH_AUTH_SOCK=/tmp/keyring-yBlitG/ssh
GPG_AGENT_INFO=/tmp/keyring-yBlitG/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-yBlitG
SSH_AUTH_SOCK=/tmp/keyring-yBlitG/ssh
GPG_AGENT_INFO=/tmp/keyring-yBlitG/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-yBlitG
SSH_AUTH_SOCK=/tmp/keyring-yBlitG/ssh
GPG_AGENT_INFO=/tmp/keyring-yBlitG/gpg:0:1
** (gnome-settings-daemon:2484): WARNING **: Connection failed, reconnecting...
(gnome-settings-daemon:2484): color-plugin-WARNING **: failed to get edid: unable to get EDID for output
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
(gnome-panel:2520): Gtk-CRITICAL **: gtk_style_context_get: assertion `priv->widget_path != NULL' failed
gnome-session[2455]: WARNING: Application 'gnome-panel.desktop' killed by signal
** (gnome-settings-daemon:2484): WARNING **: Connection failed, reconnecting...
** (gnome-settings-daemon:2484): WARNING **: Connection failed, reconnecting...
Starting log:
File:'/home/cyberpirate/.local/share/tracker/tracker-miner-rss.log'
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/cyberpirate/.config/tracker/tracker-store.cfg'
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/home/cyberpirate/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/cyberpirate/.local/share/tracker/tracker-miner-fs.log'
Tracker-Message: Setting up monitor for changes to config file:'/home/cyberpirate/.config/tracker/tracker-store.cfg'
Failed to play sound: File or data not found
Starting log:
File:'/home/cyberpirate/.local/share/tracker/tracker-store.log'
(tracker-store:2635): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
** (gnome-fallback-mount-helper:2664): DEBUG: Starting automounting manager
(bluetooth-applet:2656): Bluetooth-WARNING **: Could not open RFKILL control device, please verify your installation
** (gnome-fallback-mount-helper:2664): DEBUG: Found ConsoleKit session at path /org/freedesktop/ConsoleKit/Session2
** (gnome-fallback-mount-helper:2664): DEBUG: ScreenSaver name appeared
** (gnome-fallback-mount-helper:2664): DEBUG: ScreenSaver proxy ready
** (gnome-fallback-mount-helper:2664): DEBUG: ConsoleKit session is active 1
** (gnome-fallback-mount-helper:2664): DEBUG: Screensaver GetActive() returned 0
** Message: applet now removed from the notification area
** (nm-applet:2658): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:2658): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:2658): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
(tracker-miner-rss:2627): Tracker-WARNING **: Locale '0' is not set, defaulting to C locale
(tracker-miner-fs:2648): Tracker-WARNING **: Locale '0' is not set, defaulting to C locale
|
does it help at all? |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Tue Nov 08, 2011 9:35 am Post subject: |
|
|
Hi,
I have similar error messages in my ~/.xsession-errors. Only a few more, because I installed gnome tweak tool.
# emerge gnome-tweak-tool -s wrote: |
Searching...
[ Results for search key : gnome-tweak-tool ]
[ Applications found : 1 ]
* gnome-extra/gnome-tweak-tool
Latest version available: 3.2.1
Latest version installed: 3.2.1
Size of files: 193 kB
Homepage: http://live.gnome.org/GnomeTweakTool
Description: Tool to customize GNOME 3 options
License: GPL-2
|
I changed back too xdm gdm and adjusted autologin. Thus I receive the sound after each restart.
I changed to the current GCC.
# gcc-config -l wrote: |
[1] x86_64-pc-linux-gnu-4.5.3 *
|
And now runs a emerge -e system and emerge - e world.
I dont know whether it helps.
Ma _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Tue Nov 08, 2011 9:45 am Post subject: |
|
|
cyberpirate wrote: |
Did this and it didn't seem to improve my situation,.. |
Did you do an rc-update del xdm?
reboot
login as user, not root?
Then: --> startx? _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Fri Nov 11, 2011 4:58 pm Post subject: |
|
|
I have the same gcc profile as you and I deleted xdm from my bootup. I logged into my non-root account and ran startx. The same thing came up as when I logged in using xdm but using startx from an ssh client allowed me to grab what startx printed out, which is what follows
Code: |
hostname: Unknown host
xauth: file /home/cyberpirate/.serverauth.2526 does not exist
X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
Current Operating System: Linux cybership 3.0.6-gentoo #1 SMP Fri Nov 4 06:44:40 Local time zone must be set--see zic m x86_64
Kernel command line: BOOT_IMAGE=/boot/kernel-3.0.6-gentoo root=/dev/sda7 ro
Build Date: 04 November 2011 05:40:59PM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 11 08:54:29 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(EE) Razer Razer Lycosa: failed to initialize for relative axes.
gnome-session-is-accelerated: Zaphod mode not supported.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[2563]: WARNING: Session 'gnome' runnable check failed: Exited with code 1
gnome-session[2563]: WARNING: Unable to determine session: Unable to lookup session information for process '2563'
GNOME_KEYRING_CONTROL=/tmp/keyring-RS0NUS
SSH_AUTH_SOCK=/tmp/keyring-RS0NUS/ssh
GNOME_KEYRING_PID=2578
GNOME_KEYRING_CONTROL=/tmp/keyring-RS0NUS
GNOME_KEYRING_CONTROL=/tmp/keyring-RS0NUS
SSH_AUTH_SOCK=/tmp/keyring-RS0NUS/ssh
SSH_AUTH_SOCK=/tmp/keyring-RS0NUS/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-RS0NUS
SSH_AUTH_SOCK=/tmp/keyring-RS0NUS/ssh
GPG_AGENT_INFO=/tmp/keyring-RS0NUS/gpg:0:1
GPG_AGENT_INFO=/tmp/keyring-RS0NUS/gpg:0:1
** (gnome-settings-daemon:2575): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '2575'
(gnome-settings-daemon:2575): color-plugin-WARNING **: failed to get edid: unable to get EDID for output
** (gnome-settings-daemon:2575): WARNING **: Failed to get session for pid: GDBus.Error:org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '2575'
=== auto configure Configuration ===
Clone: false
Output: Unknown attached to default
status: on
width: 1920
height: 1080
rate: 50
primary: false
position: 0 0
=== Applying Configuration Configuration ===
Clone: false
Output: Unknown attached to default
status: on
width: 1920
height: 1080
rate: 50
primary: true
position: 0 0
(gnome-settings-daemon:2575): color-plugin-WARNING **: failed to get devices: Failed to GetDevices: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.25" (uid=1000 pid=2575 comm="/usr/libexec/gnome-settings-daemon ") interface="org.freedesktop.ColorManager" member="GetDevices" error name="(unset)" requested_reply="0" destination=":1.11" (uid=102 pid=2347 comm="/usr/libexec/colord ")
(gnome-settings-daemon:2575): libcolord-CRITICAL **: cd_device_get_id: assertion `CD_IS_DEVICE (device)' failed
(gnome-settings-daemon:2575): color-plugin-WARNING **: not found device (null): Failed to FindDeviceByProperty: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.25" (uid=1000 pid=2575 comm="/usr/libexec/gnome-settings-daemon ") interface="org.freedesktop.ColorManager" member="FindDeviceByProperty" error name="(unset)" requested_reply="0" destination=":1.11" (uid=102 pid=2347 comm="/usr/libexec/colord ")
(gnome-settings-daemon:2575): libcolord-CRITICAL **: cd_device_get_id: assertion `CD_IS_DEVICE (device)' failed
(gnome-settings-daemon:2575): color-plugin-WARNING **: not found device (null): Failed to FindDeviceByProperty: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.25" (uid=1000 pid=2575 comm="/usr/libexec/gnome-settings-daemon ") interface="org.freedesktop.ColorManager" member="FindDeviceByProperty" error name="(unset)" requested_reply="0" destination=":1.11" (uid=102 pid=2347 comm="/usr/libexec/colord ")
(gnome-settings-daemon:2575): libcolord-CRITICAL **: cd_device_get_id: assertion `CD_IS_DEVICE (device)' failed
(gnome-settings-daemon:2575): color-plugin-WARNING **: not found device (null): Failed to FindDeviceByProperty: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.25" (uid=1000 pid=2575 comm="/usr/libexec/gnome-settings-daemon ") interface="org.freedesktop.ColorManager" member="FindDeviceByProperty" error name="(unset)" requested_reply="0" destination=":1.11" (uid=102 pid=2347 comm="/usr/libexec/colord ")
(gnome-settings-daemon:2575): libcolord-CRITICAL **: cd_device_get_id: assertion `CD_IS_DEVICE (device)' failed
(gnome-settings-daemon:2575): color-plugin-WARNING **: not found device (null): Failed to FindDeviceByProperty: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.25" (uid=1000 pid=2575 comm="/usr/libexec/gnome-settings-daemon ") interface="org.freedesktop.ColorManager" member="FindDeviceByProperty" error name="(unset)" requested_reply="0" destination=":1.11" (uid=102 pid=2347 comm="/usr/libexec/colord ")
(gnome-settings-daemon:2575): libcolord-CRITICAL **: cd_device_get_id: assertion `CD_IS_DEVICE (device)' failed
(gnome-settings-daemon:2575): color-plugin-WARNING **: not found device (null): Failed to FindDeviceByProperty: GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.25" (uid=1000 pid=2575 comm="/usr/libexec/gnome-settings-daemon ") interface="org.freedesktop.ColorManager" member="FindDeviceByProperty" error name="(unset)" requested_reply="0" destination=":1.11" (uid=102 pid=2347 comm="/usr/libexec/colord ")
[1321001673,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
(gnome-panel:2614): Gtk-CRITICAL **: gtk_style_context_get: assertion `priv->widget_path != NULL' failed
gnome-session[2563]: WARNING: Application 'gnome-panel.desktop' killed by signal
|
|
|
Back to top |
|
|
Marlo Veteran
Joined: 26 Jul 2003 Posts: 1591
|
Posted: Fri Nov 11, 2011 6:32 pm Post subject: |
|
|
cyberpirate wrote: |
Code: |
hostname: Unknown host
|
|
You need a FQDN. That is a basic requirement of gnome! --> http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#book_part1_chap8
In my case:
marlo@tux ~ $ hostname wrote: |
tux
|
marlo@tux ~ $ hostname -f wrote: |
tux.earth
|
You reach it, if in:
sudo cat /etc/conf.d/hostname wrote: |
# Set to the hostname of this machine
hostname="tux"
|
appears your hostname and in
sudo cat /etc/hosts wrote: |
127.0.0.1 tux.earth tux
|
also. Without this, gnome cannot use the internal services.
If you have a server for the Internet, you need a fqdn with 2 dots. For example: server1.mydomain.com
cyberpirate wrote: | Code: |
X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.6-gentoo x86_64 Gentoo
Current Operating System: Linux cybership 3.0.6-gentoo #1 SMP Fri Nov 4 06:44:40 Local time zone must be set--see zic m x86_64
Kernel command line: BOOT_IMAGE=/boot/kernel-3.0.6-gentoo root=/dev/sda7 ro
Build Date: 04 November 2011 05:40:59PM
|
|
This is a part from your /var/log/Xorg.0.log. How you can see, you must regulate the time. http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=7#doc_chap1
cyberpirate wrote: | Code: |
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 11 08:54:29 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(EE) Razer Razer Lycosa: failed to initialize for relative axes.
|
|
This is also a part from your /var/log/Xorg.0.log. And this is a very serious error.
Your nvidia driver does not work correctly, perhaps by a wrong /etc/X11/xorg.conf or wrong kernel.
Or both?
You must looking around in this forum how you can repair this error. If this error continues, you cannot use Gnome-3.
Greetings
Ma
PS: Perhaps helps --> https://forums.gentoo.org/viewtopic-p-6833674.html#6833674 _________________ ------------------------------------------------------------------
http://radio.garden/ |
|
Back to top |
|
|
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Sun Nov 20, 2011 6:06 pm Post subject: |
|
|
YES its working now
heres what I did
I added this section to my xorg.conf file
Code: |
Section "Module"
Load "glx"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
EndSection
|
that got rid of the glx error but then two more errors popped up about dri and dri2 so with the help of this site
https://forums.gentoo.org/viewtopic-t-845429-highlight-dri2.html
I added
Code: |
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
ModulePath "/usr/lib64/opengl/xorg-x11/extensions/"
EndSection
|
to my xorg, so my entire xorg.conf looks like this
Code: |
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 275.09.07 (buildmeister@swio-display-x86-rhel47-03.nvidia.com) Wed Jun 8 14:38:32 PDT 2011
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 275.09.07 (buildmeister@swio-display-x86-rhel47-03.nvidia.com) Wed Jun 8 14:38:19 PDT 2011
# added
# /added
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
ModulePath "/usr/lib64/opengl/xorg-x11/extensions/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS MS238"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DELL E1910"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
Thanks for all your Help |
|
Back to top |
|
|
cyberpirate n00b
Joined: 11 May 2011 Posts: 11
|
Posted: Sun Nov 20, 2011 6:23 pm Post subject: |
|
|
Also one more thing, if you have a second monitor, disconnect it. Gnome 3 doesn't seem to work for me under a multi-monitor setup, which I think may have been part of the original problem |
|
Back to top |
|
|
kaktuspalme n00b
Joined: 23 Apr 2006 Posts: 29
|
Posted: Tue Dec 27, 2011 4:24 pm Post subject: |
|
|
Quote: | Also one more thing, if you have a second monitor, disconnect it. Gnome 3 doesn't seem to work for me under a multi-monitor setup, which I think may have been part of the original problem |
So you disconnected your second monitor only to run gnome 3?
I have exactly the same problem as you. If i work with only one monitor. Gnome 3 works without any problems, but if i go to nvidia-settings and configure the second screen. Gnome 3 doesn't start (it tries to start in fallback mode).
I don't know why it doesn't start. I changed the xorg.conf like you pasted here, but it doesn't work.
Any ideas? |
|
Back to top |
|
|
Terrel Shumway n00b
Joined: 26 Aug 2011 Posts: 4
|
Posted: Fri Feb 03, 2012 12:34 am Post subject: Zaphod mode not supported |
|
|
from .xsession-errors:
Code: |
gnome-session-is-accelerated: Zaphod mode not supported.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[2708]: WARNING: Session 'cinnamon' runnable check failed: Exited with code 1
|
Both screens are in fact accelerated, but gnome-shell insists on dealing with only one screen.
In my case I get a fallback-style shell with no panels.
I am running cinnamon (a Gnome-shell fork) under Linux Mint 12, but the problem happens with a lot of other setups I have tried. KDE seems to deal OK with Zaphod mode. Awesome (a very geeky window manager) fully embraces it. Unfortunately time constraints prevent me from learning awesome well enough to make it pretty.
Maybe try xinerama as a workaround.
update: Nope. xinerama makes it worse. I'll stick with awesome. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|