KoKA n00b
Joined: 25 Feb 2011 Posts: 21
|
Posted: Sat Oct 15, 2011 7:20 pm Post subject: [SOLVED][TuxOnIce] Po wybudzeniu nie działa USB |
|
|
Witam, niedawno zaktualizowałem kernel z 2.6.38-r2 do 3.0.6 (tuxonice-sources). Problem polega na tym że po wybudzeniu w ogóle przestaje działać USB. Żadne urządzenie, mysz, pendrive nie chce współpracować. System w ogóle ich nie widzi.
Przebudowałem wszystkie pakiety które pokazywało polecenie:
Code: | equery d linux-sources os-headers linux-headers |
Oprócz takich jak wine i ffmpeg
Oprócz tego:
Code: | sys-fs/udisks
sys-power/upower
sys-apps/tuxonice-userui
dev-libs/libusb
sys-apps/usbutils
|
Konfigurację kernela przekopiowałem ze starszej wersji.
http://wklej.org/id/608287/
# lsusb -v po wybudzeniu pokazuje
Code: | Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.00
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Couldn't get configuration descriptor 0, some information will be missing
Couldn't get configuration descriptor 0, some information will be missing
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.00
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Couldn't get configuration descriptor 0, some information will be missing
Couldn't get configuration descriptor 0, some information will be missing
|
$ dmesg (także po wybudzeniu)
http://wklej.org/id/608290/
Last edited by KoKA on Sat Oct 22, 2011 4:08 pm; edited 1 time in total |
|