Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
crossdev issue with perl-5.10.1 for arm
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
phoenix_me
Apprentice
Apprentice


Joined: 24 Dec 2003
Posts: 281
Location: Lubliniec

PostPosted: Mon Aug 15, 2011 8:48 pm    Post subject: crossdev issue with perl-5.10.1 for arm Reply with quote

I am trying to build perl-5.10.1 for arm but have the following error:
Code:

I used the command:

        armv5tel-softfloat-linux-gnueabi-gcc -o try -O2 -pipe -fomit-frame-pointer -I/usr/armv5tel-softfloat-linux-gnueabi/usr/include/ -I/usr/armv5tel-softfloat-linux-gnueabi/include/ -DOVR_DBL_DIG=14 -DDEBUGGING -L/usr/local/lib try.c -lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
         ./try

and I got the following output:

/bin/sh: ./try: cannot execute binary file
The program compiled OK, but exited with status 126.
You have a problem.  Shall I abort Configure [y] 
Ok.  Stopping Configure.

I am stuck and don't know where to look for resolution.
_________________
phoenix
___
myslenie ma przyszlosc
___
Back to top
View user's profile Send private message
spielc
Guru
Guru


Joined: 20 Apr 2004
Posts: 451

PostPosted: Mon Sep 19, 2011 12:07 pm    Post subject: Re: crossdev issue with perl-5.10.1 for arm Reply with quote

Hi!

phoenix_me wrote:
I am trying to build perl-5.10.1 for arm but have the following error:
Code:

I used the command:

        armv5tel-softfloat-linux-gnueabi-gcc -o try -O2 -pipe -fomit-frame-pointer -I/usr/armv5tel-softfloat-linux-gnueabi/usr/include/ -I/usr/armv5tel-softfloat-linux-gnueabi/include/ -DOVR_DBL_DIG=14 -DDEBUGGING -L/usr/local/lib try.c -lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
         ./try

and I got the following output:

/bin/sh: ./try: cannot execute binary file
The program compiled OK, but exited with status 126.
You have a problem.  Shall I abort Configure [y] 
Ok.  Stopping Configure.

....


That's actually not a crossdev-issue. The problem is that perl is one of the hardest things to cross-compile. Quite alot of ppl tried (including myself) but gave up on it. I usually install a binary-version of perl from the gentoo tinderbox.
_________________
Raise your beers up high...
Back to top
View user's profile Send private message
phoenix_me
Apprentice
Apprentice


Joined: 24 Dec 2003
Posts: 281
Location: Lubliniec

PostPosted: Mon Sep 19, 2011 12:54 pm    Post subject: Re: crossdev issue with perl-5.10.1 for arm Reply with quote

spielc wrote:
Hi!

phoenix_me wrote:
I am trying to build perl-5.10.1 for arm but have the following error:
Code:

I used the command:

        armv5tel-softfloat-linux-gnueabi-gcc -o try -O2 -pipe -fomit-frame-pointer -I/usr/armv5tel-softfloat-linux-gnueabi/usr/include/ -I/usr/armv5tel-softfloat-linux-gnueabi/include/ -DOVR_DBL_DIG=14 -DDEBUGGING -L/usr/local/lib try.c -lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
         ./try

and I got the following output:

/bin/sh: ./try: cannot execute binary file
The program compiled OK, but exited with status 126.
You have a problem.  Shall I abort Configure [y] 
Ok.  Stopping Configure.

....


That's actually not a crossdev-issue. The problem is that perl is one of the hardest things to cross-compile. Quite alot of ppl tried (including myself) but gave up on it. I usually install a binary-version of perl from the gentoo tinderbox.


I gave up not because I gave up but because I just don't have time anymore to resolve this one. Anyway under your link there is no perl for my architecture.
What I did finally - I just compiled a perl on target arch.

regards
_________________
phoenix
___
myslenie ma przyszlosc
___
Back to top
View user's profile Send private message
spielc
Guru
Guru


Joined: 20 Apr 2004
Posts: 451

PostPosted: Mon Sep 19, 2011 2:38 pm    Post subject: Re: crossdev issue with perl-5.10.1 for arm Reply with quote

phoenix_me wrote:

...

I gave up not because I gave up but because I just don't have time anymore to resolve this one. Anyway under your link there is no perl for my architecture.
What I did finally - I just compiled a perl on target arch.

regards


hmm now i wonder what this is? http://tinderbox.dev.gentoo.org/default-linux/arm/armv5tel-softfloat-linux-gnueabi/stable/dev-lang/perl-5.12.3-r1.tbz2 or http://tinderbox.dev.gentoo.org/default-linux/arm/armv5tel-softfloat-linux-gnueabi/unstable/dev-lang/perl-5.12.4-r1.tbz2 ;) I think one of the two might be the right one for you.... but as you compiled it yourself anyway no need to nitpick from my side, just wanted to show you the right place to look for stuff...
_________________
Raise your beers up high...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum