| View previous topic :: View next topic |
| Author |
Message |
silentbob
Apprentice
Joined: 09 Nov 2003
Posts: 159
Location: UK
|
 Posted: Wed Nov 26, 2003 12:15 am Post subject: kernel 2.6.0 test 1 PCI hardware problem, no network / sound |
 |
|
I've been trying to install the latest kernel since it was released yesterday. I've successfully compiled the new kernel and can boot into an (almost) fully working system, just as with 2.4.20 - the only problem is that both my network card and sound are not working.
I'm a beginner to this compile your own kernel game, but I've been through all of the options in "make menuconfig" quite a few times and I think I've compiled the new kernel about 10 times with slightly different options but still no luck resolving these issues.
The network card is a Netgear model and the sound card is the motherboard's on-board sound, it's a C-Media make. I have definitely enabled the drivers for both of these in the kernel options. Looking at the KDE "info center" (yes I'm still used to windows based GUI debugging!!) and it appears both the network card and sound card are disabled under 2.6.0 and don't have any IRQ assigned. Under the working 2.4.20 kernel both of these work and are given IRQs 19 and 17 respectively.
Below is a copy of "/var/log/messages" after booting the new kernel...
| Code: | Nov 25 23:41:29 silentbob syslog-ng[2898]: syslog-ng version 1.6.0rc3 starting
Nov 25 23:41:29 silentbob syslog-ng[2898]: Changing permissions on special file /dev/tty12
Nov 25 23:41:29 silentbob Linux version 2.6.0-test10-gentoo-r1 (root@silentbob) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #4 SMP Tue Nov 25 22:26:29 GMT 2003
Nov 25 23:41:29 silentbob BIOS-provided physical RAM map:
Nov 25 23:41:29 silentbob BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 25 23:41:29 silentbob BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 25 23:41:29 silentbob BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 25 23:41:29 silentbob BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
Nov 25 23:41:29 silentbob BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
Nov 25 23:41:29 silentbob BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
Nov 25 23:41:29 silentbob BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
Nov 25 23:41:29 silentbob BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 25 23:41:29 silentbob BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 25 23:41:29 silentbob BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 25 23:41:29 silentbob 511MB LOWMEM available.
Nov 25 23:41:29 silentbob found SMP MP-table at 000f7e90
Nov 25 23:41:29 silentbob hm, page 000f7000 reserved twice.
Nov 25 23:41:29 silentbob hm, page 000f8000 reserved twice.
Nov 25 23:41:29 silentbob hm, page 000f7000 reserved twice.
Nov 25 23:41:29 silentbob hm, page 000f8000 reserved twice.
Nov 25 23:41:29 silentbob On node 0 totalpages: 131052
Nov 25 23:41:29 silentbob DMA zone: 4096 pages, LIFO batch:1
Nov 25 23:41:29 silentbob Normal zone: 126956 pages, LIFO batch:16
Nov 25 23:41:29 silentbob HighMem zone: 0 pages, LIFO batch:1
Nov 25 23:41:29 silentbob DMI 2.3 present.
Nov 25 23:41:29 silentbob ACPI: RSDP (v000 ASUS ) @ 0x000f85e0
Nov 25 23:41:29 silentbob ACPI: RSDT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x1ffec000
Nov 25 23:41:29 silentbob ACPI: FADT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x1ffec100
Nov 25 23:41:29 silentbob ACPI: BOOT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x1ffec040
Nov 25 23:41:29 silentbob ACPI: MADT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x1ffec080
Nov 25 23:41:29 silentbob ACPI: DSDT (v001 ASUS A7M266-D 0x00001000 MSFT 0x0100000b) @ 0x00000000
Nov 25 23:41:29 silentbob ACPI: Local APIC address 0xfee00000
Nov 25 23:41:29 silentbob ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 25 23:41:29 silentbob Processor #0 6:6 APIC version 16
Nov 25 23:41:29 silentbob ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Nov 25 23:41:29 silentbob Processor #1 6:6 APIC version 16
Nov 25 23:41:29 silentbob ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1])
Nov 25 23:41:29 silentbob ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x1] trigger[0x1] lint[0x1])
Nov 25 23:41:29 silentbob Using ACPI for processor (LAPIC) configuration information
Nov 25 23:41:29 silentbob Intel MultiProcessor Specification v1.4
Nov 25 23:41:29 silentbob Virtual Wire compatibility mode.
Nov 25 23:41:29 silentbob OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000
Nov 25 23:41:29 silentbob I/O APIC #2 Version 17 at 0xFEC00000.
Nov 25 23:41:29 silentbob Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 25 23:41:29 silentbob Processors: 2
Nov 25 23:41:29 silentbob Building zonelist for node : 0
Nov 25 23:41:29 silentbob Kernel command line: root=/dev/hda3 vga=771
Nov 25 23:41:29 silentbob Initializing CPU#0
Nov 25 23:41:29 silentbob PID hash table entries: 2048 (order 11: 16384 bytes)
Nov 25 23:41:29 silentbob Detected 1667.053 MHz processor.
Nov 25 23:41:29 silentbob Console: colour VGA+ 80x25
Nov 25 23:41:29 silentbob Memory: 514952k/524208k available (1990k kernel code, 8460k reserved, 574k data, 360k init, 0k highmem)
Nov 25 23:41:29 silentbob Calibrating delay loop... 3284.99 BogoMIPS
Nov 25 23:41:29 silentbob Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 25 23:41:29 silentbob Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 25 23:41:29 silentbob Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 25 23:41:29 silentbob CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
Nov 25 23:41:29 silentbob CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
Nov 25 23:41:29 silentbob CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 25 23:41:29 silentbob CPU: L2 Cache: 256K (64 bytes/line)
Nov 25 23:41:29 silentbob CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Nov 25 23:41:29 silentbob Enabling fast FPU save and restore... done.
Nov 25 23:41:29 silentbob Enabling unmasked SIMD FPU exception support... done.
Nov 25 23:41:29 silentbob Checking 'hlt' instruction... OK.
Nov 25 23:41:29 silentbob POSIX conformance testing by UNIFIX
Nov 25 23:41:29 silentbob CPU0: AMD Athlon(TM) MP 2000+ stepping 02
Nov 25 23:41:29 silentbob per-CPU timeslice cutoff: 731.01 usecs.
Nov 25 23:41:29 silentbob task migration cache decay timeout: 1 msecs.
Nov 25 23:41:29 silentbob enabled ExtINT on CPU#0
Nov 25 23:41:29 silentbob ESR value before enabling vector: 00000000
Nov 25 23:41:29 silentbob ESR value after enabling vector: 00000000
Nov 25 23:41:29 silentbob Booting processor 1/1 eip 2000
Nov 25 23:41:29 silentbob Initializing CPU#1
Nov 25 23:41:29 silentbob masked ExtINT on CPU#1
Nov 25 23:41:29 silentbob ESR value before enabling vector: 00000000
Nov 25 23:41:29 silentbob ESR value after enabling vector: 00000000
Nov 25 23:41:29 silentbob Calibrating delay loop... 3325.95 BogoMIPS
Nov 25 23:41:29 silentbob CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
Nov 25 23:41:29 silentbob CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
Nov 25 23:41:29 silentbob CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Nov 25 23:41:29 silentbob CPU: L2 Cache: 256K (64 bytes/line)
Nov 25 23:41:29 silentbob CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Nov 25 23:41:29 silentbob CPU1: AMD Athlon(TM) MP 2000+ stepping 02
Nov 25 23:41:29 silentbob Total of 2 processors activated (6610.94 BogoMIPS).
Nov 25 23:41:29 silentbob ENABLING IO-APIC IRQs
Nov 25 23:41:29 silentbob Setting 2 in the phys_id_present_map
Nov 25 23:41:29 silentbob ...changing IO-APIC physical APIC ID to 2 ... ok.
Nov 25 23:41:29 silentbob init IO_APIC IRQs
Nov 25 23:41:29 silentbob IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-18, 2-20, 2-21, 2-22, 2-23 not connected.
Nov 25 23:41:29 silentbob ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 25 23:41:29 silentbob number of MP IRQ sources: 15.
Nov 25 23:41:29 silentbob number of IO-APIC #2 registers: 24.
Nov 25 23:41:29 silentbob testing the IO APIC.......................
Nov 25 23:41:29 silentbob IO APIC #2......
Nov 25 23:41:29 silentbob .... register #00: 02000000
Nov 25 23:41:29 silentbob ....... : physical APIC id: 02
Nov 25 23:41:29 silentbob ....... : Delivery Type: 0
Nov 25 23:41:29 silentbob ....... : LTS : 0
Nov 25 23:41:29 silentbob .... register #01: 00170011
Nov 25 23:41:29 silentbob ....... : max redirection entries: 0017
Nov 25 23:41:29 silentbob ....... : PRQ implemented: 0
Nov 25 23:41:29 silentbob ....... : IO APIC version: 0011
Nov 25 23:41:29 silentbob .... register #02: 00000000
Nov 25 23:41:29 silentbob ....... : arbitration: 00
Nov 25 23:41:29 silentbob .... IRQ redirection table:
Nov 25 23:41:29 silentbob NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Nov 25 23:41:29 silentbob 00 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 01 001 01 0 0 0 0 0 1 1 39
Nov 25 23:41:29 silentbob 02 001 01 0 0 0 0 0 1 1 31
Nov 25 23:41:29 silentbob 03 001 01 0 0 0 0 0 1 1 41
Nov 25 23:41:29 silentbob 04 001 01 0 0 0 0 0 1 1 49
Nov 25 23:41:29 silentbob 05 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 06 001 01 0 0 0 0 0 1 1 51
Nov 25 23:41:29 silentbob 07 001 01 0 0 0 0 0 1 1 59
Nov 25 23:41:29 silentbob 08 001 01 0 0 0 0 0 1 1 61
Nov 25 23:41:29 silentbob 09 001 01 0 0 0 0 0 1 1 69
Nov 25 23:41:29 silentbob 0a 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 0b 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 0c 001 01 0 0 0 0 0 1 1 71
Nov 25 23:41:29 silentbob 0d 001 01 0 0 0 0 0 1 1 79
Nov 25 23:41:29 silentbob 0e 001 01 0 0 0 0 0 1 1 81
Nov 25 23:41:29 silentbob 0f 001 01 0 0 0 0 0 1 1 89
Nov 25 23:41:29 silentbob 10 001 01 1 1 0 1 0 1 1 91
Nov 25 23:41:29 silentbob 11 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 12 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 13 001 01 1 1 0 1 0 1 1 99
Nov 25 23:41:29 silentbob 14 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 15 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 16 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob 17 000 00 1 0 0 0 0 0 0 00
Nov 25 23:41:29 silentbob IRQ to pin mappings:
Nov 25 23:41:29 silentbob IRQ0 -> 0:2
Nov 25 23:41:29 silentbob IRQ1 -> 0:1
Nov 25 23:41:29 silentbob IRQ3 -> 0:3
Nov 25 23:41:29 silentbob IRQ4 -> 0:4
Nov 25 23:41:29 silentbob IRQ6 -> 0:6
Nov 25 23:41:29 silentbob IRQ7 -> 0:7
Nov 25 23:41:29 silentbob IRQ8 -> 0:8
Nov 25 23:41:29 silentbob IRQ9 -> 0:9
Nov 25 23:41:29 silentbob IRQ12 -> 0:12
Nov 25 23:41:29 silentbob IRQ13 -> 0:13
Nov 25 23:41:29 silentbob IRQ14 -> 0:14
Nov 25 23:41:29 silentbob IRQ15 -> 0:15
Nov 25 23:41:29 silentbob IRQ16 -> 0:16
Nov 25 23:41:29 silentbob IRQ19 -> 0:19
Nov 25 23:41:29 silentbob .................................... done.
Nov 25 23:41:29 silentbob Using local APIC timer interrupts.
Nov 25 23:41:29 silentbob calibrating APIC timer ...
Nov 25 23:41:29 silentbob ..... CPU clock speed is 1666.0517 MHz.
Nov 25 23:41:29 silentbob ..... host bus clock speed is 266.0642 MHz.
Nov 25 23:41:29 silentbob checking TSC synchronization across 2 CPUs: passed.
Nov 25 23:41:29 silentbob Starting migration thread for cpu 0
Nov 25 23:41:29 silentbob Bringing up 1
Nov 25 23:41:29 silentbob CPU 1 IS NOW UP!
Nov 25 23:41:29 silentbob Starting migration thread for cpu 1
Nov 25 23:41:29 silentbob CPUS done 4
Nov 25 23:41:29 silentbob NET: Registered protocol family 16
Nov 25 23:41:29 silentbob PCI: PCI BIOS revision 2.10 entry at 0xf1f20, last bus=2
Nov 25 23:41:29 silentbob PCI: Using configuration type 1
Nov 25 23:41:29 silentbob mtrr: v2.0 (20020519)
Nov 25 23:41:29 silentbob mtrr: your CPUs had inconsistent fixed MTRR settings
Nov 25 23:41:29 silentbob mtrr: probably your BIOS does not setup all CPUs.
Nov 25 23:41:29 silentbob mtrr: corrected configuration.
Nov 25 23:41:29 silentbob Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 25 23:41:29 silentbob pnp: the driver 'system' has been registered
Nov 25 23:41:29 silentbob PnPBIOS: Scanning system for PnP BIOS support...
Nov 25 23:41:29 silentbob PnPBIOS: Found PnP BIOS installation structure at 0xc00fc5e0
Nov 25 23:41:29 silentbob PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc610, dseg 0xf0000
Nov 25 23:41:29 silentbob pnp: match found with the PnP device '00:06' and the driver 'system'
Nov 25 23:41:29 silentbob pnp: match found with the PnP device '00:0f' and the driver 'system'
Nov 25 23:41:29 silentbob pnp: 00:0f: ioport range 0xe400-0xe47f has been reserved
Nov 25 23:41:29 silentbob pnp: 00:0f: ioport range 0xe4e0-0xe4ff has been reserved
Nov 25 23:41:29 silentbob PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
Nov 25 23:41:29 silentbob SCSI subsystem initialized
Nov 25 23:41:29 silentbob PCI: Probing PCI hardware
Nov 25 23:41:29 silentbob PCI: Probing PCI hardware (bus 00)
Nov 25 23:41:29 silentbob PCI: Using IRQ router AMD768 [1022/7443] at 0000:00:07.3
Nov 25 23:41:29 silentbob PCI->APIC IRQ transform: (B1,I5,P0) -> 16
Nov 25 23:41:29 silentbob PCI->APIC IRQ transform: (B2,I0,P3) -> 19
Nov 25 23:41:29 silentbob radeonfb_pci_register BEGIN
Nov 25 23:41:29 silentbob radeonfb: ref_clk=2700, ref_div=12, xclk=14300 from BIOS
Nov 25 23:41:29 silentbob radeonfb: probed DDR SGRAM 65536k videoram
Nov 25 23:41:29 silentbob radeon_get_moninfo: bios 4 scratch = 2000002
Nov 25 23:41:29 silentbob radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
Nov 25 23:41:29 silentbob radeonfb: DVI port no monitor connected
Nov 25 23:41:29 silentbob radeonfb: CRT port CRT monitor connected
Nov 25 23:41:29 silentbob radeonfb_pci_register END
Nov 25 23:41:29 silentbob SBF: Simple Boot Flag extension found and enabled.
Nov 25 23:41:29 silentbob SBF: Setting boot flags 0x1
Nov 25 23:41:29 silentbob Starting balanced_irq
Nov 25 23:41:29 silentbob devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
Nov 25 23:41:29 silentbob devfs: boot_options: 0x0
Nov 25 23:41:29 silentbob pty: 256 Unix98 ptys configured
Nov 25 23:41:29 silentbob Real Time Clock Driver v1.12
Nov 25 23:41:29 silentbob [drm] Initialized radeon 1.9.0 20020828 on minor 0
Nov 25 23:41:29 silentbob RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Nov 25 23:41:29 silentbob Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
Nov 25 23:41:29 silentbob Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 25 23:41:29 silentbob ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 25 23:41:29 silentbob AMD7441: IDE controller at PCI slot 0000:00:07.1
Nov 25 23:41:29 silentbob AMD7441: chipset revision 4
Nov 25 23:41:29 silentbob AMD7441: not 100% native mode: will probe irqs later
Nov 25 23:41:29 silentbob ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 25 23:41:29 silentbob AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller
Nov 25 23:41:29 silentbob ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
Nov 25 23:41:29 silentbob ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
Nov 25 23:41:29 silentbob hda: IC35L090AVV207-0, ATA DISK drive
Nov 25 23:41:29 silentbob Using anticipatory io scheduler
Nov 25 23:41:29 silentbob ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 25 23:41:29 silentbob hdc: IC35L080AVVA07-0, ATA DISK drive
Nov 25 23:41:29 silentbob hdd: Maxtor 6Y160P0, ATA DISK drive
Nov 25 23:41:29 silentbob ide1 at 0x170-0x177,0x376 on irq 15
Nov 25 23:41:29 silentbob pnp: the driver 'ide' has been registered
Nov 25 23:41:29 silentbob hda: max request size: 1024KiB
Nov 25 23:41:29 silentbob hda: 160836480 sectors (82348 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
Nov 25 23:41:29 silentbob /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Nov 25 23:41:29 silentbob hdc: max request size: 128KiB
Nov 25 23:41:29 silentbob hdc: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
Nov 25 23:41:29 silentbob /dev/ide/host0/bus1/target0/lun0: p1
Nov 25 23:41:29 silentbob hdd: max request size: 1024KiB
Nov 25 23:41:29 silentbob hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(100)
Nov 25 23:41:29 silentbob /dev/ide/host0/bus1/target1/lun0: p1
Nov 25 23:41:29 silentbob mice: PS/2 mouse device common for all mice
Nov 25 23:41:29 silentbob input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
Nov 25 23:41:29 silentbob serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 25 23:41:29 silentbob input: AT Translated Set 2 keyboard on isa0060/serio0
Nov 25 23:41:29 silentbob serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 25 23:41:29 silentbob NET: Registered protocol family 2
Nov 25 23:41:29 silentbob IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 25 23:41:29 silentbob TCP: Hash tables configured (established 32768 bind 32768)
Nov 25 23:41:29 silentbob NET: Registered protocol family 1
Nov 25 23:41:29 silentbob NET: Registered protocol family 17
Nov 25 23:41:29 silentbob found reiserfs format "3.6" with standard journal
Nov 25 23:41:29 silentbob Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 25 23:41:29 silentbob reiserfs: checking transaction log (hda3) for (hda3)
Nov 25 23:41:29 silentbob Using r5 hash to sort names
Nov 25 23:41:29 silentbob VFS: Mounted root (reiserfs filesystem) readonly.
Nov 25 23:41:29 silentbob Freeing unused kernel memory: 360k freed
Nov 25 23:41:29 silentbob Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1
Nov 25 23:41:29 silentbob found reiserfs format "3.6" with standard journal
Nov 25 23:41:29 silentbob Reiserfs journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 25 23:41:29 silentbob reiserfs: checking transaction log (hdc1) for (hdc1)
Nov 25 23:41:29 silentbob Using r5 hash to sort names
Nov 25 23:41:29 silentbob found reiserfs format "3.6" with standard journal
Nov 25 23:41:29 silentbob Reiserfs journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 25 23:41:29 silentbob reiserfs: checking transaction log (hdd1) for (hdd1)
Nov 25 23:41:29 silentbob Using r5 hash to sort names
Nov 25 23:41:29 silentbob drivers/usb/core/usb.c: registered new driver usbfs
Nov 25 23:41:29 silentbob drivers/usb/core/usb.c: registered new driver hub
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:30 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:31 silentbob pci.agent: ... no modules for PCI slot
Nov 25 23:41:31 silentbob ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64
Nov 25 23:41:31 silentbob rc-scripts: Failed to bring eth0 up
Nov 25 23:41:31 silentbob rc-scripts: ERROR: Problem starting needed services.
Nov 25 23:41:31 silentbob rc-scripts: "mysql" was not started.
Nov 25 23:41:31 silentbob rc-scripts: ERROR: Problem starting needed services.
Nov 25 23:41:31 silentbob rc-scripts: "netmount" was not started.
Nov 25 23:41:31 silentbob rc-scripts: ERROR: Problem starting needed services.
Nov 25 23:41:31 silentbob rc-scripts: "apache2" was not started.
Nov 25 23:41:32 silentbob pnp: the driver 'parport_pc' has been registered
Nov 25 23:41:32 silentbob pnp: match found with the PnP device '00:00' and the driver 'parport_pc'
Nov 25 23:41:32 silentbob parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Nov 25 23:41:32 silentbob parport0: cpp_daisy: aa5500ff(98)
Nov 25 23:41:32 silentbob parport0: assign_addrs: aa5500ff(98)
Nov 25 23:41:32 silentbob parport0: Legacy device
Nov 25 23:41:32 silentbob lp0: using parport0 (polling).
Nov 25 23:41:32 silentbob lp0: console ready
Nov 25 23:41:33 silentbob rc-scripts: ERROR: Problem starting needed services.
Nov 25 23:41:33 silentbob rc-scripts: "samba" was not started.
Nov 25 23:41:33 silentbob cron[3674]: (CRON) STARTUP (fork ok)
Nov 25 23:41:35 silentbob init: Activating demand-procedures for 'A'
Nov 25 23:41:35 silentbob xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/freefont (unreadable)
Nov 25 23:41:35 silentbob xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/sharefont (unreadable)
Nov 25 23:41:35 silentbob xfs: ignoring font path element /usr/share/fonts/default/Type1 (unreadable)
Nov 25 23:41:35 silentbob xfs: ignoring font path element /usr/share/fonts/ttf/decoratives (unreadable)
Nov 25 23:41:35 silentbob xfs: ignoring font path element /usr/share/fonts/ttf/western (unreadable)
Nov 25 23:41:49 silentbob kde(pam_unix)[3939]: session opened for user root by (uid=0)
|
Anyone know what's going on...? I'm very puzzled, but I really want to 'crack' this new kernel.
Oh and one more thing, when I try to shutdown from 2.6.0 it doesn't power off the pc completely after shutting down. strange!
Thanks for any help 
_________________
My Gentoo Linux Stuff | Get FireFox |
|
| Back to top |
|
 |
vitriol
Apprentice
Joined: 01 Nov 2003
Posts: 162
Location: US
|
| Posted: Wed Nov 26, 2003 2:45 am Post subject: |
|
|
You said to you are new to compiling kernels...just to make sure, you did rm -rf /usr/src/linux and create a new symlink to the beta kernel, right? Sorry, I don't mean to insult your intelligence. 
_________________
The specs on the box said windows 98 or better, so I installed gentoo. |
|
| Back to top |
|
|
vitriol
Apprentice
Joined: 01 Nov 2003
Posts: 162
Location: US
|
| Posted: Wed Nov 26, 2003 2:48 am Post subject: |
|
|
Sorry, I just scrolled up and see the 2.6.0-test10 kernel label. 
To make sure you are using the correct modules/drivers, try this:
| Code: | root@fux0red syn # lspci
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 11)
00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 11)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03)
00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 03)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 03)
00:1f.6 Modem: Intel Corp. Intel 537 [82801BA/BAM AC'97 Modem] (rev 03)
01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02)
01:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
root@fux0red syn #
|
It's possible you are usin the wrong modules.
_________________
The specs on the box said windows 98 or better, so I installed gentoo. |
|
| Back to top |
|
|
silentbob
Apprentice
Joined: 09 Nov 2003
Posts: 159
Location: UK
|
| Posted: Wed Nov 26, 2003 9:49 am Post subject: thanks |
|
|
| vitriol wrote: | To make sure you are using the correct modules/drivers, try this:
|
Thanks for your help, I'll give that a go when I'm home from work this evening, I hope it is an easy to fix modules problem! Oh and yes I did create the symlink to the new kernel, /usr/src/linux -> /usr/src/linux-2.6.0-test1 (can't remember exact name now!).
_________________
My Gentoo Linux Stuff | Get FireFox |
|
| Back to top |
|
|
silentbob
Apprentice
Joined: 09 Nov 2003
Posts: 159
Location: UK
|
| Posted: Wed Nov 26, 2003 10:18 pm Post subject: latest |
|
|
I've just tried the "lspci" command on the new 2.6.0 kernel (and compared it with my working 2.4.20 kernel). The output was identical on both:
| Code: | bash-2.05b# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07)
02:04.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
02:08.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller |
Any other suggestions - the only PCI card plugged in to the motherboard is the network card, plug an ATI Radeon 7000 AGP graphics card, the sound is on-board I'm going to go back and re-read the kernel upgrade guide and follow it to the letter. Progress report later! |
|
| Back to top |
|
|
silentbob
Apprentice
Joined: 09 Nov 2003
Posts: 159
Location: UK
|
| Posted: Wed Nov 26, 2003 11:48 pm Post subject: update |
|
|
...an update! Well I recompiled the kernel after reading the guide on kerneltrap thoroughly, and going through every one of the options in "make menuconfig", then did "make && make modules_install". I don't know if this is a problem or not, but at the end of compiling the kernel produced the following:
| Code: | (....previous lines removed for clarity!)
INSTALL drivers/scsi/sr_mod.ko
INSTALL fs/udf/udf.ko
INSTALL drivers/usb/storage/usb-storage.ko
INSTALL drivers/usb/core/usbcore.ko
INSTALL fs/vfat/vfat.ko
INSTALL net/xfrm/xfrm_user.ko
if [ -r System.map ]; then /sbin/depmod -ae -F System.map 2.6.0-test10-gentoo-r1; fi
|
Rebooted the kernel and oops, I removed devfs which gentoo requires. Anyway the network card still doesn't work - but I realised that the driver I need is "National Semiconductor Corporation DP83815" (even though I had just included every network card driver previously).
Anyway, the error messages produced on boot in full is:
| Code: | * Bringing eth0 up...
SCOCSIFFLAGS: Device or resource busy
* Setting default gateway
SIOCADDRT: network is unreachable
* Failed to bring eth0 up
* Bring eth0 down |
Damn!
Similar problem here http://www.linuxquestions.org/questions/history/113273
and here http://www.knoppix.net/forum/viewtopic.php?t=5491&view=previous
I'm going to try the suggestion of disabling PnP ij the BIOS and see what happens.... |
|
| Back to top |
|
|
silentbob
Apprentice
Joined: 09 Nov 2003
Posts: 159
Location: UK
|
| Posted: Fri Nov 28, 2003 12:39 am Post subject: Re: update |
|
|
| silentbob wrote: | | I'm going to try the suggestion of disabling PnP in the BIOS and see what happens.... |
Success....! I now have the network card working, eth0, by disabling "PnP OS" in the bios...result.
| Code: | bash-2.05b$ uname -a
Linux silentbob 2.6.0-test10-gentoo-r1 #6 SMP Wed Nov 26 23:38:29 GMT 2003 i686 AMD Athlon(TM) MP 2000+ AuthenticAMD GNU/Linux |
Now I just need to get the sound card working with ALSA and I'll be sorted!
Ta'rah |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
