| View previous topic :: View next topic |
| Author |
Message |
electro
n00b
Joined: 28 Feb 2008
Posts: 46
Location: Poland-Zamość
|
 Posted: Sat Jun 11, 2011 7:55 am Post subject: problem z X'ami , xorg - nie działają , mam kartę nvidia |
 |
|
Mam problem z X'ami gdy pisuje startx, robilem wg kilku instrukcji z www gentoo - odnosnie x.org i instalacji sterownikow nvidia
pokazuje mi tylko blad :
| Code: |
(EE) Failed to load module "dri" (module does not exist, 0)
(EE) Failed to load module "dri2" (module does not exist, 0)
(EE) No devices detected. <------ mysle ze z tym jest problem nie rozpoznaje, nie moze wykryc karty itp.
Fatal server error:
no screens found
|
mam zainstalowane sterowniki nvidia-drivers , instalowalem potem rowiez najnowsze ze ze strony nvidi , i też nic
Mam geforce 9400GT 512MB PCI-E
Kde mam juz zainstalaowane.
Probowałem juz kilkadziesiąt razy modyfikować xorg.conf ale nic
mój obecny xorg.conf
| Code: |
Section "Module"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "i2c"
Load "ddc"
Load "vbe"
Load "dri"
Load "glx"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
VertRefresh 43 - 60
HorizSync 28 - 80
EndSection
Section "Device"
Identifier "SabayonVga0"
Driver "nvidia"
BusID "PCI:01:00.0"
#Option "RenderAccel" "on"
#Option "XAANoOffscreenPixmaps"
#Option "BusType" "PCI"
#Option "ColorTiling" "on"
#Option "EnablePageFlip" "on"
Option "UseEvents" "True"
EndSection
Section "Screen"
Identifier "Screen 0"
Device "SabayonVga0"
Monitor "Generic Monitor"
Option "AddARGBGLXVisuals" "true"
DefaultDepth 24
SubSection "Display"
Depth 8
ViewPort 0 0
#Modes "1024x768" "800x600" "640x480"
EndSubsection
SubSection "Display"
Depth 16
ViewPort 0 0
#Modes "1024x768" "800x600" "640x480"
EndSubsection
SubSection "Display"
Depth 24
ViewPort 0 0
#Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerLayout"
Identifier "Main Layout"
Screen 0 "Screen 0"
EndSection
Section "Extensions"
#Option "Composite" "Enable"
EndSection
|
i log z Xorga :
| Code: |
[ 8559.136]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 8559.147] X Protocol Version 11, Revision 0
[ 8559.150] Build Operating System: Linux 2.6.38-gentoo-r6 x86_64 Gentoo
[ 8559.154] Current Operating System: Linux localhost 2.6.38-gentoo-r6 #7 SMP Fri Jun 10 21:27:02 CEST 2011 x86_64
[ 8559.162] Kernel command line: root=/dev/sdb4 raid=noautodetect
[ 8559.166] Build Date: 10 June 2011 08:10:37PM
[ 8559.170]
[ 8559.174] Current version of pixman: 0.20.2
[ 8559.179] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8559.188] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8559.204] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 11 02:13:52 2011
[ 8559.210] (==) Using config file: "/etc/X11/xorg.conf"
[ 8559.215] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8559.221] (==) ServerLayout "Main Layout"
[ 8559.221] (**) |-->Screen "Screen 0" (0)
[ 8559.221] (**) | |-->Monitor "Generic Monitor"
[ 8559.221] (**) | |-->Device "SabayonVga0"
[ 8559.221] (**) Option "AllowMouseOpenFail" "true"
[ 8559.221] (==) Automatically adding devices
[ 8559.221] (==) Automatically enabling devices
[ 8559.221] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 8559.221] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 8559.221] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8559.221] (II) Loader magic: 0x7b5140
[ 8559.221] (II) Module ABI versions:
[ 8559.221] X.Org ANSI C Emulation: 0.4
[ 8559.221] X.Org Video Driver: 8.0
[ 8559.221] X.Org XInput driver : 11.0
[ 8559.221] X.Org Server Extension : 4.0
[ 8559.221] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8559.221] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 8559.221] (II) "dbe" will be loaded by default.
[ 8559.221] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 8559.221] (II) "record" will be loaded by default.
[ 8559.221] (II) "dri" will be loaded by default.
[ 8559.221] (II) "dri2" will be loaded by default.
[ 8559.221] (II) LoadModule: "extmod"
[ 8559.222] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 8559.222] (II) Module extmod: vendor="X.Org Foundation"
[ 8559.222] compiled for 1.9.5, module version = 1.0.0
[ 8559.222] Module class: X.Org Server Extension
[ 8559.222] ABI class: X.Org Server Extension, version 4.0
[ 8559.222] (II) Loading extension MIT-SCREEN-SAVER
[ 8559.222] (II) Loading extension XFree86-VidModeExtension
[ 8559.222] (II) Loading extension DPMS
[ 8559.222] (II) Loading extension XVideo
[ 8559.222] (II) Loading extension XVideo-MotionCompensation
[ 8559.222] (II) Loading extension X-Resource
[ 8559.222] (II) LoadModule: "i2c"
[ 8559.222] (II) Module "i2c" already built-in
[ 8559.222] (II) LoadModule: "ddc"
[ 8559.222] (II) Module "ddc" already built-in
[ 8559.222] (II) LoadModule: "vbe"
[ 8559.222] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 8559.222] (II) Module vbe: vendor="X.Org Foundation"
[ 8559.222] compiled for 1.9.5, module version = 1.1.0
[ 8559.222] ABI class: X.Org Video Driver, version 8.0
[ 8559.222] (II) LoadModule: "glx"
[ 8559.222] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 8559.234] (II) Module glx: vendor="NVIDIA Corporation"
[ 8559.234] compiled for 4.0.2, module version = 1.0.0
[ 8559.234] Module class: X.Org Server Extension
[ 8559.234] (II) NVIDIA GLX Module 275.09.04 Thu Jun 2 13:09:45 PDT 2011
[ 8559.234] (II) Loading extension GLX
[ 8559.234] (II) LoadModule: "dbe"
[ 8559.234] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 8559.235] (II) Module dbe: vendor="X.Org Foundation"
[ 8559.235] compiled for 1.9.5, module version = 1.0.0
[ 8559.235] Module class: X.Org Server Extension
[ 8559.235] ABI class: X.Org Server Extension, version 4.0
[ 8559.235] (II) Loading extension DOUBLE-BUFFER
[ 8559.235] (II) LoadModule: "record"
[ 8559.235] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 8559.235] (II) Module record: vendor="X.Org Foundation"
[ 8559.235] compiled for 1.9.5, module version = 1.13.0
[ 8559.235] Module class: X.Org Server Extension
[ 8559.235] ABI class: X.Org Server Extension, version 4.0
[ 8559.235] (II) Loading extension RECORD
[ 8559.235] (II) LoadModule: "dri"
[ 8559.235] (WW) Warning, couldn't open module dri
[ 8559.235] (II) UnloadModule: "dri"
[ 8559.235] (EE) Failed to load module "dri" (module does not exist, 0)
[ 8559.241] (II) LoadModule: "dri2"
[ 8559.241] (WW) Warning, couldn't open module dri2
[ 8559.241] (II) UnloadModule: "dri2"
[ 8559.241] (EE) Failed to load module "dri2" (module does not exist, 0)
[ 8559.247] (II) LoadModule: "nvidia"
[ 8559.247] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 8559.247] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 8559.247] compiled for 4.0.2, module version = 1.0.0
[ 8559.247] Module class: X.Org Video Driver
[ 8559.247] (II) NVIDIA dlloader X Driver 275.09.04 Thu Jun 2 12:53:09 PDT 2011
[ 8559.247] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 8559.248] (--) using VT number 7
[ 8559.252] (EE) No devices detected.
[ 8559.252]
Fatal server error:
[ 8559.252] no screens found
[ 8559.252]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 8559.252] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 8559.252]
|
|
|
| Back to top |
|
 |
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Sat Jun 11, 2011 9:01 am Post subject: |
|
|
Nie masz dodatkowo zintegrowanej karty intela tam? Jezeli masz nvidia optimus, to musisz najpierw sie na nvidie przelaczyc.
Problemem moze byc tez brak obslugi agp w kernelu, chociaz to emerge powinno sprawdzic przy emergowaniu. |
|
| Back to top |
|
|
electro
n00b
Joined: 28 Feb 2008
Posts: 46
Location: Poland-Zamość
|
| Posted: Sat Jun 11, 2011 1:21 pm Post subject: |
|
|
| SlashBeast wrote: | Nie masz dodatkowo zintegrowanej karty intela tam? Jezeli masz nvidia optimus, to musisz najpierw sie na nvidie przelaczyc.
Problemem moze byc tez brak obslugi agp w kernelu, chociaz to emerge powinno sprawdzic przy emergowaniu. |
Zintegrowanej na płycie głównej nie mam grafiki. Mam na PCi-E geforce 9400GT 512MB, na live cd gentoo ładnie działa, pod knoppixem live-dvd mam nawet full efekty compiz itp. |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Sat Jun 11, 2011 3:01 pm Post subject: |
|
|
| Quote: | | instalowalem potem rowiez najnowsze ze ze strony nvidi |
Blad. nie doczytalem tego wczesniej. emerge nvidia-drivers i moze tam wyskoczy, ze czegos brakuje w kernelu. |
|
| Back to top |
|
|
electro
n00b
Joined: 28 Feb 2008
Posts: 46
Location: Poland-Zamość
|
| Posted: Sat Jun 11, 2011 3:06 pm Post subject: |
|
|
| SlashBeast wrote: | | Quote: | | instalowalem potem rowiez najnowsze ze ze strony nvidi |
Blad. nie doczytalem tego wczesniej. emerge nvidia-drivers i moze tam wyskoczy, ze czegos brakuje w kernelu. |
emerge nvidia-drivers robiłem już wcześniej ale też nie pomogło
najpierw mialem nvidia-drivers ale nie chciały mi X działac - blad ten sam , a potem zainstalowałem te sterowniki od producenta nvidi i tez nic |
|
| Back to top |
|
|
Crenshaw
Guru
Joined: 23 Jun 2004
Posts: 474
Location: Poland
|
| Posted: Sat Jun 11, 2011 5:38 pm Post subject: |
|
|
| wklej wynik dmesg |grep NV |
|
| Back to top |
|
|
electro
n00b
Joined: 28 Feb 2008
Posts: 46
Location: Poland-Zamość
|
| Posted: Sat Jun 11, 2011 6:56 pm Post subject: |
|
|
pomoglo mi
| Code: | | rc-update add udev sysinit && /etc/init.d/udev start |
teraz mam problem z klawiaturą i myszą na usb , nie działają pod kde 4
klawiatura pod konsolą przed uruchomieniem kde mi dzialala
póżniej zapodam xorga i jeszcze raz spojrzę w dokumentacje gentoo odnosnie tych urzadzen - ich konfuguracji |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Sun Jun 12, 2011 10:30 am Post subject: |
|
|
| Jak Ty to gentoo instalowales jak udeva nie miales w runlevelu? |
|
| Back to top |
|
|
electro
n00b
Joined: 28 Feb 2008
Posts: 46
Location: Poland-Zamość
|
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Sun Jun 12, 2011 12:39 pm Post subject: |
|
|
| No to skoro pomijales, to zonk. udev jest w sysinit runlevelu juz w stage3, ostro namieszales, pomysl moze o nowej instalacji. |
|
| Back to top |
|
|
soban_
l33t
Joined: 27 Aug 2008
Posts: 668
Location: /home/soban
|
| Posted: Sun Jun 12, 2011 12:52 pm Post subject: |
|
|
E bez przesady, mysle ze jeszcze z tego wyjdziesz rc-update sprawdz czy czegos nie brakuje, do tego upgrade wykonaj systemu i dokladniej czytaj handbooki - wykonaj to czego brakuje lub pominales. Jednak podtrzymujac w pewnym stopniu rade @SlashBeasta zrob lepiej backup konfigow - bo jak sie posypie, to bedziesz mial spory problem, aby to wszystko odzyskac - co do tej pory stworzyles. Co do klawiatury/myszki: | Code: | [14:59:21 - 11-06-12] /home/soban % cat /etc/make.conf | grep INPUT
INPUT_DEVICES="evdev" |
Code Listing 2.6: Sample make.conf entries && emerge -avquDN world
_________________
gg: 525600 |
|
| Back to top |
|
|
Pryka
l33t
Joined: 08 Jun 2007
Posts: 658
Location: /dev/null
|
| Posted: Sun Jun 12, 2011 4:48 pm Post subject: |
|
|
To bardzo mądrze... aż dziw, że tak daleko zabrnąłeś pomijając polecenia. Czego tu można nie wiedzieć?
Jedziesz praktycznie od początku, czytając ZE ZROZUMIENIEM wszystko, a nie bez sensu przyklepywać komendy nie wiedząc co to oznacza, bo to się tak nie uda. Tam nie ma gotowców, sporo komend trzeba "dostosować" pod siebie i pod to co chcemy osiągnąć. |
|
| Back to top |
|
|
bike123
n00b
Joined: 05 Dec 2010
Posts: 4
|
| Posted: Thu Jun 23, 2011 8:38 pm Post subject: |
|
|
Niema problemu.
Wroce z pracy zrobie nowy temat.
Pozdrawiam.
Last edited by bike123 on Fri Jun 24, 2011 2:27 am; edited 1 time in total |
|
| Back to top |
|
|
SlashBeast
Retired Dev
Joined: 23 May 2006
Posts: 2922
|
| Posted: Thu Jun 23, 2011 9:10 pm Post subject: |
|
|
| Nie doklejaj sie do cudzego podobnego problemu tylko stworz nowy temat. |
|
| Back to top |
|
|
|
Polskie forum (Polish) 
