Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[OVH] réparation en cas d'emerge --sync sur release 2 ovh
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
goxha
n00b
n00b


Joined: 01 Jun 2011
Posts: 1

PostPosted: Wed Jun 01, 2011 2:12 pm    Post subject: [OVH] réparation en cas d'emerge --sync sur release 2 ovh Reply with quote

Bonjour,

J'ai la réponse a un bug de la release 2 de chez ovh.

j'ai pris un serveur chez ovh avec la release 2 (gentoo).

le système marchez très bien jusqu'à çe que je fasse un emerge --sync

quand je faisais un emerge imapsync ou autres j'avais l'erreur :
Code:

!!! Your current profile is deprecated and not supported anymore.
!!! Please upgrade to the following profile if possible:
        default/linux/x86/10.0

To upgrade do the following steps:
# Check 'eselect profile list'.
# Find the number that corresponds with the default/linux/x86/10.0 profile.
# Use 'eselect profile set <number>' to set a new /etc/make.profile symlink.
#
# Reference: http://www.gentoo.org/doc/en/gentoo-upgrading.xml
# See: "General instructions" in Section 3. "Profile updating instructions"


Calculating dependencies | *
 * ERROR: dev-lang/php4-ovh-4.4.8_pre20070816-r1 failed.
 * Call stack:
 *                              ebuild.sh, line 1590:  Called source '/usr/local/portage-ovh/dev-lang/php4-ovh/php4-ovh-4.4.8_pre20070816-r1.ebuild'
 *   php4-ovh-4.4.8_pre20070816-r1.ebuild, line   29:  Called inherit 'php4_4-sapi'
 *                              ebuild.sh, line 1312:  Called die
 * The specific snippet of code:
 * QA Notice: 'sed' called in global scope: eclass php4_4-sapi
 * QA Notice: 'sed' called in global scope: eclass php4_4-sapi
 *              [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *  The die message:
 *   php4_4-sapi.eclass could not be found by inherit()
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * This ebuild is from an overlay: '/usr/local/portage-ovh/'
 *                                                                                                                                                                                                  - *
 * ERROR: dev-lang/php5-ovh-5.2.13-r1 failed.
 * Call stack:
 *                   ebuild.sh, line 1590:  Called source '/usr/local/portage-ovh/dev-lang/php5-ovh/php5-ovh-5.2.13-r1.ebuild'
 *   php5-ovh-5.2.13-r1.ebuild, line   26:  Called inherit 'php5_2-sapi'
 *                   ebuild.sh, line 1312:  Called die
 * The specific snippet of code:
 * QA Notice: 'sed' called in global scope: eclass php5_2-sapi
 * QA Notice: 'sed' called in global scope: eclass php5_2-sapi
 *              [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *  The die message:
 *   php5_2-sapi.eclass could not be found by inherit()
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * This ebuild is from an overlay: '/usr/local/portage-ovh/'
 *                                                                                                                                                                                                  / *
 * ERROR: net-misc/openssh-5.5_p1 failed.
 * Call stack:
 *               ebuild.sh, line 1590:  Called source '/usr/local/portage-ovh/net-misc/openssh/openssh-5.5_p1.ebuild'
 *   openssh-5.5_p1.ebuild, line    5:  Called inherit 'eutils' 'flag-o-matic' 'ccc' 'multilib' 'autotools' 'pam'
 *               ebuild.sh, line 1312:  Called die
 * The specific snippet of code:
 * QA Notice: 'sed' called in global scope: eclass ccc
 * QA Notice: 'sed' called in global scope: eclass ccc
 *              [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()"
 *  The die message:
 *   ccc.eclass could not be found by inherit()
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * This ebuild is from an overlay: '/usr/local/portage-ovh/'
 *                                                                                                                                                                                                  |
!!! All ebuilds that could satisfy "imapsync" have been masked.
!!! One of the following masked packages is required to complete your request:
- net-mail/imapsync-1.303 (masked by: required EAPI 2, supported EAPI 1)
- net-mail/imapsync-1.350-r1 (masked by: required EAPI 2, supported EAPI 1)
- net-mail/imapsync-1.404 (masked by: required EAPI 3, supported EAPI 1)

For more information, see MASKED PACKAGES section in the emerge man page or
refer to the Gentoo Handbook.


J'ai résolu le problème avec:

Code:
cd /home
wget ftp://ftp.ovh.net/made-in-ovh/release/2.14-2.15/portage32.tar.gz
rm -rf /usr/portage/*
tar -xvzpf portage32.tar.gz -C /
#verifier le profile:
ls -al /etc/make.profile
emerge --metadata
#selectioné le bon profile si erreur
eselect profile list
eselect profile set l'id du profile


cordialement,
Back to top
View user's profile Send private message
nyx7
n00b
n00b


Joined: 02 Apr 2012
Posts: 1

PostPosted: Mon Apr 02, 2012 3:27 pm    Post subject: Reply with quote

Hello, j'ai tenté de suivre tes indications,

home # ls -al /etc/make.profile
lrwxrwxrwx 1 root root 46 jun 23 2011 /etc/make.profile -> /usr/portage/profiles/default/linux/x86/2008.0
home # emerge --metadata
--- 'profiles/arch.list' is empty or not available. Empty portage tree?
--- 'profiles/updates' is empty or not available. Empty portage tree?
>>> Updating Portage cache: 100%
home # eselect profile list
/usr/bin/sed: impossible de lire //usr/portage/profiles/profiles.desc: Aucun fichier ou répertoire de ce type
!!! Error: Failed to get a list of valid profiles
Processus arrêté
home # /usr/bin/sed: impossible de lire //usr/portage/profiles/profiles.desc: Aucun fichier ou répertoire de ce type
Back to top
View user's profile Send private message
XavierMiller
Moderator
Moderator


Joined: 23 Jul 2004
Posts: 5447
Location: ~Brussels - Belgique

PostPosted: Tue Apr 17, 2012 6:38 pm    Post subject: Reply with quote

Message déplacé dans la bonne section (ouch, je ne visite la section "documentation" que quand j'ai pris mon bain annuel :twisted: )
_________________
Xavier Miller
(FR) Merci de respecter les règles du forum.
http://www.xaviermiller.be
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum