Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Samsung Galaxy S i Gentoo
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Polish OTW
View previous topic :: View next topic  
Author Message
Xywa
l33t
l33t


Joined: 23 Jul 2005
Posts: 836
Location: /mnt/Gentoo/

PostPosted: Wed May 18, 2011 9:36 am    Post subject: Samsung Galaxy S i Gentoo Reply with quote

Witam,

Czy ktoś może opisać jak skorzystać z Samsunga Galaxy S pod Gentoo (KDE)? Czy są potrzebne jakieś bibloteki (jak do iPhona)?
Wyczytałem w Linux Magazine że np. Banshee czy Amarok radzą sobie bez problemu z iPodem czy z Samasung Galaxy S.

Próbuje podłączyć Samsunga Galaxy S, ale jakoś bez rezultatów. Teoretycznie system go zauważa. Macie jakieś sugestie?

lsusb
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 001 Device 012: ID 04e8:6877 Samsung Electronics Co., Ltd
Bus 002 Device 002: ID 192f:0716 Avago Technologies, Pte.


dmesg
Code:
[  662.027989] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[  662.028002] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001002 0  ACK POWER sig=se0 CSC
[  662.028026] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
[  662.028030] usb 1-1: USB disconnect, address 10
[  662.028032] usb 1-1: unregistering device
[  662.028035] usb 1-1: unregistering interface 1-1:4.0
[  662.028102] usb 1-1: unregistering interface 1-1:4.1
[  662.028148] usb 1-1: unregistering interface 1-1:4.2
[  662.028206] usb 1-1: usb_disable_device nuking all URBs
[  662.132105] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
[  664.028100] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[  664.028111] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[  664.028119] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
[  664.054029] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001002 0  ACK POWER sig=se0 CSC
[  664.158024] hub 1-0:1.0: debounce: port 1: total 125ms stable 100ms status 0x100
[  664.158029] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[  665.610827] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
[  665.610839] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[  665.610847] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
[  665.714030] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
[  665.765264] ehci_hcd 0000:00:04.1: port 1 high speed
[  665.765272] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  665.816036] usb 1-1: new high speed USB device using ehci_hcd and address 11
[  665.867273] ehci_hcd 0000:00:04.1: port 1 high speed
[  665.867280] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[  665.930988] usb 1-1: skipped 4 descriptors after interface
[  665.931114] usb 1-1: default language 0x0409
[  665.931480] usb 1-1: udev 11, busnum 1, minor = 10
[  665.931482] usb 1-1: New USB device found, idVendor=04e8, idProduct=6877
[  665.931485] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  665.931488] usb 1-1: Product: SAMSUNG_Android
[  665.931490] usb 1-1: Manufacturer: SAMSUNG
[  665.931493] usb 1-1: SerialNumber: 1000de22b82c
[  665.931598] usb 1-1: usb_probe_device
[  665.931603] usb 1-1: configuration #4 chosen from 1 choice
[  665.931854] usb 1-1: adding 1-1:4.0 (config #4, interface 0)
[  665.932024] usb 1-1: adding 1-1:4.1 (config #4, interface 1)
[  665.932142] usb 1-1: adding 1-1:4.2 (config #4, interface 2)
[  665.932276] drivers/usb/core/inode.c: creating file '011'


Last edited by Xywa on Mon May 30, 2011 6:24 am; edited 1 time in total
Back to top
View user's profile Send private message
Xywa
l33t
l33t


Joined: 23 Jul 2005
Posts: 836
Location: /mnt/Gentoo/

PostPosted: Mon May 30, 2011 6:21 am    Post subject: Reply with quote

Znalazłem już rozwiązanie i podaje dla potomnych.

[1] W kernelu ustawiamy: CONFIG_SCSI_MULTI_LUN=y

[2] W telefonie w ustawieniach wybieramy: Settings -> Applications -> Development -> USB Debugging

[3] Podłączamy kabelek USB z telefonu do komputera

[4] U góry w telefonie na pasku zadań pojawi się ikonka z symbolem USB, rozwijamy menu i klikamy "USB Connectet"

[5] Pokaże się symbol Androida z przyciskiem "Connect USB storage"

[6] Mamy pełny dostęp do wszystkich plików zarówno na wbudowanej karcie w telefonie jak i na karcie dodatkowej :)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Polish OTW All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum