Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Authentication failure on tty after update
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
moinmoin
n00b
n00b


Joined: 01 Jan 2011
Posts: 2

PostPosted: Sat Jan 01, 2011 4:05 pm    Post subject: Authentication failure on tty after update Reply with quote

Hello Everyone,

I am new here and not a native speaker, so please be patient... Although this is a relatively fresh install, I posted this here, because of the `security` issue

After some years with GNU/Linux - mostly Ubuntu - I now wanted to check out gentoo. Installed it via a stage3 tarball as mentioned in the handbook. Everything worked fine. Yesterday (sic), I did an update with
Code:
emerge --sync

and then
Code:
emerge -uDNav world


After this I was instructed that some config files needed updating. I searched in the doc and found the `dispatch-conf` tool from the gentoolkit bundle. I ran that and was prompted for thirty-odd config files. Since I did no real custom configuration on my system yet (apart from the ones mentioned in the handbook, e.g. make.conf, for gnome compatibility), I thought that all the suggested new config files would play along well. This is why I used the new versions for all of these config files.

Today I wanted to emerge gnome finally, but as mentioned in the title, I can not login as root or other user on the system. I always get `Authentication failure`.

I booted the liveCD and had a look at my dmesg output:
Code:
Authentication failure
pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty1 ruser= rhost= user=root
FAILED LOGIN (1) on '/dev/tty1' FOR 'root', Authentication failure


This has to be related to some of the config files, I presume.

Any hints on this?

Thanks in advance
Back to top
View user's profile Send private message
moinmoin
n00b
n00b


Joined: 01 Jan 2011
Posts: 2

PostPosted: Sat Jan 01, 2011 10:14 pm    Post subject: Reply with quote

I think I tracked down the responsible config file, namely /etc/pam.d/system-auth

Code:
auth required pam_env.so
auth required pam_unix.so try_first_pass likeauth nullok
auth optional pam_permit.so

account required pam_unix.so
account optional pam_permit.so

password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
password required pam_unix.so try_first_pass use_authok nullok sha512 shadow
password optional pam_permit.so

session required pam_limits.so
session required pam_env.so
session required pam_unix.so
session optional pam_permit.s


So as I understand it, the problem lies with
Code:
auth required pam_unix.so try_first_pass likeauth nullok


After consulting doc, I found none of the above options to pam_unix.so suspicious

I found no other debug option to get down to the problem...

Any hints?
Back to top
View user's profile Send private message
anesed
n00b
n00b


Joined: 12 Dec 2011
Posts: 4

PostPosted: Mon Dec 12, 2011 1:21 pm    Post subject: Bump Reply with quote

Greetings, I understand that this is an old topic but I'm facing the exact same problem (updated, now can't login by any means), has anyone found a solution? this really upsets me when I think of how long it took me to install the system and the desktop environment...
Back to top
View user's profile Send private message
John R. Graham
Administrator
Administrator


Joined: 08 Mar 2005
Posts: 7718
Location: Somewhere over Atlanta, Georgia

PostPosted: Mon Dec 12, 2011 3:04 pm    Post subject: Reply with quote

Fear not. You can boot up with any old install CD, mount your partitions, and chroot in to troubleshoot. Do you need specific instructions?

- John
_________________
This space intentionally left blank.
Back to top
View user's profile Send private message
anesed
n00b
n00b


Joined: 12 Dec 2011
Posts: 4

PostPosted: Thu Dec 15, 2011 1:08 pm    Post subject: Reply with quote

Greetings, I followed the instructions on the Handbook in order to chroot into my Gentoo partition, tried passwd but it didn't work (password changed but the error persisted), so I took a look at the logs and this is what I found in the last 20 lines of /var/log/everything/current:

Code:
Dec 11 23:14:50 [login] Authentication failure
Dec 11 23:14:53 [login] pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty2 ruser= rhost=  user=root
Dec 11 23:14:56 [login] FAILED LOGIN (1) on '/dev/tty2' FOR 'root', Authentication failure
Dec 11 23:15:01 [login] pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty2 ruser= rhost=  user=myuser
Dec 11 23:15:03 [login] FAILED LOGIN (2) on '/dev/tty2' FOR 'myuser', Authentication failure
Dec 11 23:15:07 [login] pam_tally2(login:auth): pam_get_uid; no such user
Dec 11 23:15:18 [login] Authentication failure
                - Last output repeated twice -
Dec 11 23:15:30 [login] pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty2 ruser= rhost=  user=myuser
Dec 11 23:15:33 [login] FAILED LOGIN (1) on '/dev/tty2' FOR 'myuser', Authentication failure
Dec 11 23:15:40 [gdm] pam_unix(gdm:auth): authentication failure; logname= uid=0 euid=0 tty=:0 ruser= rhost=  user=myuser
Dec 11 23:15:43 [gdm] WARNING: Couldn't authenticate user_
Dec 11 23:15:52 [gdm] WARNING: Couldn't set acct. mgmt for myuserr_
                - Last output repeated twice -
Dec 11 23:16:17 [gdm] WARNING: Couldn't set acct. mgmt for root_
Dec 11 23:16:23 [shutdown] shutting down for system halt
Dec 11 23:16:24 [init] Switching to runlevel: 0
Dec 11 23:16:25 [dhcpcd] received SIGTERM, stopping
Dec 11 23:16:25 [dhcpcd] eth1: removing interface
Dec 11 23:16:25 [dhcpcd] eth1: eth1: MTU restored to 1500


I changed the name of my user to "myuser", I also tried inputting incorrect usernames and passwords and obtained the usual errors so, according to this log, the error seems to be caused by pam, any clues on how to fix this? this is likely a config error, but the config file doesn't seem suspicious.

Cheers.
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 8905

PostPosted: Fri Dec 16, 2011 11:02 pm    Post subject: Reply with quote

Please post the output of emerge --info sys-libs/pam ; cat -n /etc/pam.d/{login,system-local-login,system-login,system-auth}.
Back to top
View user's profile Send private message
anesed
n00b
n00b


Joined: 12 Dec 2011
Posts: 4

PostPosted: Sun Dec 18, 2011 2:51 pm    Post subject: Reply with quote

Hu wrote:
Please post the output of emerge --info sys-libs/pam ; cat -n /etc/pam.d/{login,system-local-login,system-login,system-auth}.


This is the output I got:

Code:
Portage 2.1.10.11 (default/linux/x86/10.0/desktop/gnome, gcc-4.5.3, glibc-2.12.2-r0, 2.6.38-11-generic i686)
=================================================================
                        System Settings
=================================================================
System uname: Linux-2.6.38-11-generic-i686-Intel-R-_Pentium-R-_Dual_CPU_T3400_@_2.16GHz-with-gentoo-2.0.3
Timestamp of tree: Tue, 08 Nov 2011 13:15:01 +0000
app-shells/bash:          4.1_p9
dev-lang/python:          2.7.2-r3, 3.1.4-r3
dev-util/cmake:           2.8.4-r1
dev-util/pkgconfig:       0.26
sys-apps/baselayout:      2.0.3
sys-apps/openrc:          0.8.3-r1
sys-apps/sandbox:         2.4
sys-devel/autoconf:       2.13, 2.68
sys-devel/automake:       1.11.1
sys-devel/binutils:       2.20.1-r1
sys-devel/gcc:            4.5.3-r1
sys-devel/gcc-config:     1.4.1-r1
sys-devel/libtool:        2.4-r1
sys-devel/make:           3.82-r1
sys-kernel/linux-headers: 2.6.39 (virtual/os-headers)
sys-libs/glibc:           2.12.2
Repositories: gentoo
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs distlocks ebuild-locks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="http://gentoo.localhost.net.ar/ ftp://mirrors.tera-byte.com/pub/gentoo http://gentoo.mirrors.tera-byte.com/ http://ftp.ucsb.edu/pub/mirrors/linux/gentoo/"
LANG="es_VE.UTF-8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.us.gentoo.org/gentoo-portage"
USE="X a52 aac acl acpi alsa berkdb bluetooth branding bzip2 cairo cdda cdr cli colord consolekit cracklib crypt cups cxx dbus dri dts dvd dvdr eds emboss encode evo exif fam firefox flac fortran gdbm gdu gif gnome gnome-keyring gpm gstreamer gtk iconv ipv6 jpeg lcms ldap libnotify mad mng modules mp3 mp4 mpeg mudflap nautilus ncurses nls nptl nptlonly ogg opengl openmp pam pango pcre pdf png policykit ppds pppd qt3support readline sdl session spell ssl startup-notification svg sysfs tcpd tiff truetype udev unicode usb vorbis x264 x86 xcb xml xorg xulrunner xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="intel" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, LINGUAS, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

=================================================================
                        Package Settings
=================================================================

sys-libs/pam-1.1.5 was built with the following:
USE="berkdb cracklib nls -audit -debug -nis (-selinux) -test -vim-syntax"

     1  auth       required     pam_securetty.so
     2  auth       include      system-local-login
     3
     4  account    include      system-local-login
     5  password   include      system-local-login
     6  session    include      system-local-login
     7  auth            include         system-login
     8  account         include         system-login
     9  password        include         system-login
    10  session         include         system-login
    11  auth            required        pam_tally2.so onerr=succeed
    12  auth            required        pam_shells.so
    13  auth            required        pam_nologin.so
    14  auth            include         system-auth
    15  auth            required        pam_env.so
    16  auth            required        pam_unix.so try_first_pass likeauth nullok
    17  auth            optional        pam_permit.so
    18   
    19  account         required        pam_unix.so
    20  account         optional        pam_permit.so
    21   
    22  password        required        pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
    23  password        required        pam_unix.so try_first_pass use_authtok nullok sha512 shadow
    24  password        optional        pam_permit.so
    25   
    26  session         required        pam_limits.so
    27  session         required        pam_env.so
    28  session         required        pam_unix.so
    29  session         optional        pam_permit.so


By the way, does the "berkdb" USE flag refer to PostgreSQL? because I think I have not installed it yet... anyways, I'll be expecting your comments eagerly, thank you very much in advance.

Cheers.
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 8905

PostPosted: Sun Dec 18, 2011 6:55 pm    Post subject: Reply with quote

It looks like your /etc/pam.d/system-login is empty. For me, it is:
/etc/pam.d/system-login:
auth      required   pam_tally2.so onerr=succeed
auth      required   pam_shells.so
auth      required   pam_nologin.so
auth      include      system-auth
             
account      required   pam_access.so
account      required   pam_nologin.so
account      include      system-auth
account      required   pam_tally2.so onerr=succeed
 
password   include      system-auth
 
session         optional        pam_loginuid.so
session      required   pam_env.so
session      optional   pam_lastlog.so
session      include      system-auth
session      optional   pam_motd.so motd=/etc/motd
session      optional   pam_mail.so
Back to top
View user's profile Send private message
anesed
n00b
n00b


Joined: 12 Dec 2011
Posts: 4

PostPosted: Sun Dec 18, 2011 10:57 pm    Post subject: Reply with quote

Hu wrote:
It looks like your /etc/pam.d/system-login is empty. For me, it is:
/etc/pam.d/system-login:
auth      required   pam_tally2.so onerr=succeed
auth      required   pam_shells.so
auth      required   pam_nologin.so
auth      include      system-auth
             
account      required   pam_access.so
account      required   pam_nologin.so
account      include      system-auth
account      required   pam_tally2.so onerr=succeed
 
password   include      system-auth
 
session         optional        pam_loginuid.so
session      required   pam_env.so
session      optional   pam_lastlog.so
session      include      system-auth
session      optional   pam_motd.so motd=/etc/motd
session      optional   pam_mail.so


Thank you very much, Hu, this seemed to be precisely my problem, I just copied the old system-login that dispatch-conf wrote as a backup to my /etc/pam.d directory and voilá!, I could login once again.

Cheers.
Back to top
View user's profile Send private message
Martin Cmelik
n00b
n00b


Joined: 14 Oct 2010
Posts: 27
Location: Prague

PostPosted: Tue Dec 20, 2011 8:27 am    Post subject: Reply with quote

Hi,

Im facing this problem for last month with every new installation. Im installing gentoo from stage3 (hardened) and if I turn on debug mode for pam (touch /etc/pam_debug) I see difference when I put wrong password or correct one.

When password is wrong it says something like:
pam_unix(login:auth): authentication failure
and next line is: login: FAILED LOGIN

But when I put correct one I see in debug only FAILED LOGIN without previous reason why.

My /etc/pam.d/system-login is same as mentioned by Hu.

If you have some other hint please let me know.

Thank you!
_________________
Code:
sed '66!d;s/[0-9]*\.\s*//;s/\./\!/' /usr/src/linux/M*
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 8905

PostPosted: Wed Dec 21, 2011 12:33 am    Post subject: Reply with quote

Martin: please post the output of emerge --info sys-libs/pam; for a in /etc/pam.d/{login,system-local-login,system-login,system-auth}; do echo "$a"; cat -n "$a"; done. This is a variation of the command I requested above. The variant should produce more readable output.
Back to top
View user's profile Send private message
Martin Cmelik
n00b
n00b


Joined: 14 Oct 2010
Posts: 27
Location: Prague

PostPosted: Wed Dec 21, 2011 8:34 am    Post subject: Reply with quote

Hu wrote:
Martin: please post the output of emerge --info sys-libs/pam; for a in /etc/pam.d/{login,system-local-login,system-login,system-auth}; do echo "$a"; cat -n "$a"; done. This is a variation of the command I requested above. The variant should produce more readable output.


Hi,

here you have it:
Code:
/etc/pam.d/login
     1  auth       required     pam_securetty.so
     2  auth       include      system-local-login
     3
     4  account    include      system-local-login
     5  password   include      system-local-login
     6  session    include      system-local-login
/etc/pam.d/system-local-login
     1  auth            include         system-login
     2  account         include         system-login
     3  password        include         system-login
     4  session         include         system-login
/etc/pam.d/system-login
     1  auth            required        pam_tally2.so onerr=succeed
     2  auth            required        pam_shells.so
     3  auth            required        pam_nologin.so
     4  auth            include         system-auth
     5
     6  account         required        pam_access.so
     7  account         required        pam_nologin.so
     8  account         include         system-auth
     9  account         required        pam_tally2.so onerr=succeed
    10
    11  password        include         system-auth
    12
    13  session         optional        pam_loginuid.so
    14  session         required        pam_env.so
    15  session         optional        pam_lastlog.so
    16  session         include         system-auth
    17  session         optional        pam_motd.so motd=/etc/motd
    18  session         optional        pam_mail.so
    19
/etc/pam.d/system-auth
     1  auth            required        pam_env.so
     2  auth            required        pam_unix.so try_first_pass likeauth nullok
     3  auth            optional        pam_permit.so
     4
     5  account         required        pam_unix.so
     6  account         optional        pam_permit.so
     7
     8  password        required        pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
     9  password        required        pam_unix.so try_first_pass use_authtok nullok sha512 shadow
    10  password        optional        pam_permit.so
    11
    12  session         required        pam_limits.so
    13  session         required        pam_env.so
    14  session         required        pam_unix.so
    15  session         optional        pam_permit.so


Im now in chroot so Im not sure if
Code:
emerge --info
is needed because it will be related to LiveCD.
_________________
Code:
sed '66!d;s/[0-9]*\.\s*//;s/\./\!/' /usr/src/linux/M*
Back to top
View user's profile Send private message
Hu
Watchman
Watchman


Joined: 06 Mar 2007
Posts: 8905

PostPosted: Thu Dec 22, 2011 3:08 am    Post subject: Reply with quote

Those pam values look similar to my working configuration. Please provide the requested emerge --info after entering the chroot. Most of the information it prints is derived from the active filesystem, so it is relevant even when you use a LiveCD.
Back to top
View user's profile Send private message
Martin Cmelik
n00b
n00b


Joined: 14 Oct 2010
Posts: 27
Location: Prague

PostPosted: Thu Dec 22, 2011 8:36 am    Post subject: Reply with quote

Hu wrote:
Those pam values look similar to my working configuration. Please provide the requested emerge --info after entering the chroot. Most of the information it prints is derived from the active filesystem, so it is relevant even when you use a LiveCD.


Here it is:
Code:
Portage 2.1.9.42 (hardened/linux/amd64, gcc-4.4.5, libc-0-r0, 3.0.6-gentoo x86_64)
=================================================================
System uname: Linux-3.0.6-gentoo-x86_64-with-gentoo-2.0.3
Timestamp of tree: Wed, 21 Dec 2011 00:45:01 +0000
ccache version 3.1.6 [enabled]
app-shells/bash:     4.1_p9
dev-lang/python:     2.7.1-r1, 3.1.3-r1
dev-util/ccache:     3.1.6
dev-util/pkgconfig:  0.26
sys-apps/baselayout: 2.0.3
sys-apps/openrc:     0.8.3
sys-apps/sandbox:    2.4
sys-devel/autoconf:  2.65-r1
sys-devel/automake:  1.11.1
sys-devel/binutils:  2.21.1-r1
sys-devel/gcc:       4.4.5, 4.5.3-r1
sys-devel/gcc-config: 1.4.1-r1
sys-devel/libtool:   2.2.10
sys-devel/make:      3.82
sys-kernel/linux-headers: 2.6.36.1
sys-libs/glibc:      2.12.2
virtual/os-headers:  0
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -fforce-addr -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /etc/bash/bashrc /etc/conf.d/hostname /etc/issue /etc/profile /etc/ssh/sshd_config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -fforce-addr -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests binpkg-logs buildpkg ccache distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch"
FFLAGS=""
GENTOO_MIRRORS="http://ftp.fi.muni.cz/pub/linux/gentoo/"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="en"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="acl amd64 bash-completion bashlogger berkdb bzip2 chroot cli cracklib crypt cups cxx dri gdbm gnutls gpm hardened iconv jpeg justify ldap mmx modules mudflap multilib ncurses nls nptl nptlonly openmp pam pax_kernel pcre perl pic png pppd python readline secure-delete session snmp sse sse2 ssl symlink sysfs tcpd unicode urandom vim-syntax xml xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan stage tables krita karbon braindump" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY

_________________
Code:
sed '66!d;s/[0-9]*\.\s*//;s/\./\!/' /usr/src/linux/M*
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum