| View previous topic :: View next topic |
| Author |
Message |
ilikeit
n00b
Joined: 06 Jun 2004
Posts: 28
Location: France (07)
|
 Posted: Thu Aug 19, 2010 2:31 pm Post subject: [livecd]Unable to get a prompt via ttyS0 on a SunFire V480. |
 |
|
Hello,
I'm trying to install gentoo with a minimal liveCD (install-sparc64-minimal-20100816.iso) on two SunFires v480 via serial console.
The only card installed is the Sun RSC card, so i have no video out.
Both units behave the same way:
The boot PROM don't give any errors (pasted below).
I can boot the liveCD, but i don't get any prompt after the "* Starting local ... [ ok ]" line.
Following advices from #gentoo-sparc users (thanks), i tried -without success- to boot kernel with parameter console=ttySx (x from 0 to 4), with and without init=/bin/bash.
I'm accessing the server through the only (external) serial console, from a win32 hyperterminal (9600/8-N-1, ANSI).
Any hints on getting a prompt OR automatically starting sshd with a blank/known password?
Regards,
-Laurent.
Here is the full console output:
| Code: |
<*>
Hardware Power On
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 4XX
System is initializing with diag-switch? overrides.
Online: CPU0 CPU1 CPU2 CPU3*
Validating JTAG integrity...Done
Disabling DAR error circuitry...Done
Clearing DCS error circuitry state...Done
Initializing DTL circuitry state...Done
Initializing CDX via JTAG...Done
Enabling DAR error circuitry...Done
Probing core system FRUs..
Probing Centerplane....part# 501-5819-15 serial# 053250
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
'STICK' clock 10MHz; BootBus timing 014f.99fd.a7e6.3f29
Probing I/O Riser......part# 501-5820-04 serial# 050190
Probing System RSC.....part# 501-5856-06 serial# 074393
Probing PwrDistBoard...part# 375-3006-05 serial# M59212
Probing PowerSupply0...part# 300-1480-05 serial# N19929
Probing PowerSupply1...part# 300-1480-05 serial# N03679
Probing FCAL BPlane0...part# 501-5822-04 serial# 050876
Probing GPTwo Slot A...part# 501-6163-02 serial# 115358
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
CPU rated speed 1050MHz; ECache 8MB 3.3ns
Probing GPTwo Slot B...part# 501-6163-02 serial# 118444
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
CPU rated speed 1050MHz; ECache 8MB 3.3ns Done
Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00
... CPU1 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00
... CPU2 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00
... CPU3 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00 Done
Setting system speed (and resetting)...
<*>
Set Speed Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 4XX
System is initializing with diag-switch? overrides.
Online: CPU0 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU1 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU2 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: *CPU3 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Executing POST w/%o0 = 0000.0800.0101.2041
0:0>
0:0>@(#) Sun Fire[TM] V480/V490 POST 4.15.0 2004/05/27 13:25
/dat/fw/common-source/firmware_re/post/post-build-4.15.0/Camelot/cstone/integrated (firmware_re)
0:0>Copyright © 2004 Sun Microsystems, Inc. All rights reserved
SUN PROPRIETARY/CONFIDENTIAL.
Use is subject to license terms.
0:0>Jump from OBP->POST.
0:0>Diag level set to MIN.
0:0>Verbosity level set to NORMAL.
0:0>
0:0>Start selftest...
0:0>CPUs present in system: 0:0 1:0 2:0 3:0
0:0>Test CPU(s)..... \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - Done
0:0>Init Scan/I2C..... \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - Done
0:0>Basic Memory Test..... \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ Done
0:0>Memory Block..... | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / Done
0:0>IO-Bridge Tests..... - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ Done
0:0>Enable Errors..... | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | Done
0:0>INFO:
0:0> POST Passed all devices.
0:0>POST: Return to OBP.
CPU0: System POST Completed
Pass/Fail Status = 0000.0000.0000.0000
ESB Overall Status = ffff.ffff.ffff.ffff
<*>
POST Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 4XX
System is initializing with diag-switch? overrides.
Online: CPU0 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU1 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU2 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: *CPU3 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Configuring CPUs..........
... CPU0 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00
... CPU1 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00
... CPU2 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00
... CPU3 Rated Speed 1050MHz, Safari 150MHz, want 7:1, got 7:1 ==> CPU 1050MHz
Ecache 8MB 3.3ns mode=4-4-4 2-way ECCR: 0000.0000.0323.4c00 Done
<*>
CPU Configuration Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 4XX
System is initializing with diag-switch? overrides.
Online: CPU0 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU1 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU2 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: *CPU3 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Enabling system bus....... CPU0 CPU1 CPU2 CPU3 Done
Probing Memory............
Probing CPU0 memory configuration
NGDIMM#0 part# 501-5030-03 serial# K052S9, 256MB + 256MB, SC#0
NGDIMM#1 part# 501-5030-03 serial# B14G8B, 256MB + 256MB, SC#0
NGDIMM#2 part# 501-5030-03 serial# B14FX8, 256MB + 256MB, SC#0
NGDIMM#3 part# 501-5030-03 serial# B14FX5, 256MB + 256MB, SC#0
NGDIMM#4 part# 501-5030-03 serial# B14FXB, 256MB + 256MB, SC#0
NGDIMM#5 part# 501-5030-03 serial# B14GBG, 256MB + 256MB, SC#0
NGDIMM#6 part# 501-5030-03 serial# B14FVR, 256MB + 256MB, SC#0
NGDIMM#7 part# 501-5030-03 serial# B14FX4, 256MB + 256MB, SC#0
Probing CPU1 memory configuration
NGDIMM#0 part# 501-5030-03 serial# B14G84, 256MB + 256MB, SC#0
NGDIMM#1 part# 501-5030-03 serial# B14FW5, 256MB + 256MB, SC#0
NGDIMM#2 part# 501-5030-03 serial# B14G1G, 256MB + 256MB, SC#0
NGDIMM#3 part# 501-5030-03 serial# B14G1B, 256MB + 256MB, SC#0
NGDIMM#4 part# 501-5030-03 serial# B14G80, 256MB + 256MB, SC#0
NGDIMM#5 part# 501-5030-03 serial# B14G87, 256MB + 256MB, SC#0
NGDIMM#6 part# 501-5030-03 serial# B14G82, 256MB + 256MB, SC#0
NGDIMM#7 part# 501-5030-03 serial# B14G7X, 256MB + 256MB, SC#0
Probing CPU2 memory configuration
NGDIMM#0 part# 501-5030-03 serial# B14FX9, 256MB + 256MB, SC#0
NGDIMM#1 part# 501-5030-03 serial# B14FWR, 256MB + 256MB, SC#0
NGDIMM#2 part# 501-5030-03 serial# B14FXC, 256MB + 256MB, SC#0
NGDIMM#3 part# 501-5030-03 serial# B14FX7, 256MB + 256MB, SC#0
NGDIMM#4 part# 501-5030-03 serial# K052S4, 256MB + 256MB, SC#0
NGDIMM#5 part# 501-5030-03 serial# K052S8, 256MB + 256MB, SC#0
NGDIMM#6 part# 501-5030-03 serial# B14FXF, 256MB + 256MB, SC#0
NGDIMM#7 part# 501-5030-03 serial# B14FYG, 256MB + 256MB, SC#0
Probing CPU3 memory configuration
NGDIMM#0 part# 501-5030-03 serial# B14FW6, 256MB + 256MB, SC#0
NGDIMM#1 part# 501-5030-03 serial# B14G1F, 256MB + 256MB, SC#0
NGDIMM#2 part# 501-5030-03 serial# B14G1M, 256MB + 256MB, SC#0
NGDIMM#3 part# 501-5030-03 serial# B14G1R, 256MB + 256MB, SC#0
NGDIMM#4 part# 501-5030-03 serial# B14G1J, 256MB + 256MB, SC#0
NGDIMM#5 part# 501-5030-03 serial# B14G83, 256MB + 256MB, SC#0
NGDIMM#6 part# 501-5030-03 serial# B14G12, 256MB + 256MB, SC#0
NGDIMM#7 part# 501-5030-03 serial# B14G7Z, 256MB + 256MB, SC#0 Done
Initializing CPUs.........
Mungeing Memory...........Done
HiMem: 0000.00b0.0000.0000, size: 0000.0002.0000.0000
Configuring Memory........ CPU0 CPU1 CPU2 CPU3 Done
Init ICache/etc........... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Tags.......... CPU0 CPU1 CPU2 CPU3 Done
Clearing TLBs............. CPU0 CPU1 CPU2 CPU3 Done
Setup I/DTLBs............. CPU0 CPU1 CPU2 CPU3 Done
Enabling Cache/MMUs....... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Data.......... CPU0 CPU1 CPU2 CPU3 Done
Initializing boot memory..
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 128KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.48b3.35b0; ROM CRC = 0000.0000.48b3.35b0
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.2c30 (460KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0 Done
Boot CPU3 starting Forth at 0000.0000.f000.00e0
Diagnostic console initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 3,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Probing gptwo at 10,0 Nothing there
Probing gptwo at 11,0 Nothing there
Probing gptwo at 12,0 Nothing there
Probing gptwo at 13,0 Nothing there
Loading Support Packages: obp-tftp kbd-translator SUNW,i2c-ram-device
SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru
fru fru fru fru fru fru fru fru fru fru fru fru fru nvram idprom fru
fru i2c temperature temperature temperature ioexp ioexp ioexp
temperature ioexp ioexp ioexp ioexp temperature-sensor fru fru fru
fru fru rscrtc rtc gpio pmc rsc-control rsc-console serial
Memory Configuration:
CPU0 Bank0 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #0
CPU0 Bank1 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #2
CPU0 Bank2 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #4
CPU0 Bank3 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #6
CPU1 Bank0 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #0
CPU1 Bank1 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #2
CPU1 Bank2 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #4
CPU1 Bank3 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #6
CPU2 Bank0 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #1
CPU2 Bank1 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #3
CPU2 Bank2 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #5
CPU2 Bank3 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #7
CPU3 Bank0 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #1
CPU3 Bank1 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #3
CPU3 Bank2 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #5
CPU3 Bank3 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #7
Probing /pci@8,600000 Device 1 Nothing there
Probing /pci@8,600000 Device 2 Nothing there
Probing /pci@8,700000 Device 2 Nothing there
Probing /pci@8,700000 Device 3 Nothing there
Probing /pci@8,700000 Device 4 Nothing there
Probing /pci@8,700000 Device 5 Nothing there
Probing /pci@8,700000 Device 6 ide disk cdrom
Probing /pci@9,600000 Device 1 network
Probing /pci@9,600000 Device 2 SUNW,qlc fp disk
Probing /pci@9,700000 Device 1 usb
Probing /pci@9,700000 Device 2 network
Sun Fire 480R, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.15.1, 16384 MB memory installed, Serial #56428413.
Ethernet address 0:3:ba:5d:7:7d, Host ID: 835d077d.
Creating CPU memory layout properties.
Running diagnostic script obdiag/normal
Testing /pci@9,600000/SUNW,qlc@2
Testing /pci@9,700000/ebus@1/i2c@1,2e
Testing /pci@9,700000/ebus@1/i2c@1,30
Testing /pci@9,700000/ebus@1/bbc@1,0
Testing /pci@9,700000/ebus@1
Testing /pci@9,600000/network@1
Testing /pci@9,700000/network@2
Testing /pci@9,700000/usb@1,3
Testing /pci@9,700000/ebus@1/pmc@1,300700
Testing /pci@9,700000/ebus@1/rtc@1,300070
Initializing 1MB of memory at addr b1ffb3c000 -
Initializing 1MB of memory at addr b1ffa38000 -
Initializing 11MB of memory at addr b1ff000000 -
Initializing 8176MB of memory at addr b000000000 -
Initializing 8GB of memory at addr a000000000 \|/-\|/-\|/-\|/-
Reading temperature limits from FRUPROMs: CPU0/2 CPU1/3 BACKPLANE
Environmental monitor is ON
Resetting ...
<*>
Firmware I/O Diagnostics Reset
@(#)OBP 4.15.1 2004/06/02 16:06 Sun Fire 4XX
System is initializing with diag-switch? overrides.
Online: CPU0 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU1 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: CPU2 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Online: *CPU3 UltraSPARC III+ (v11.0) 7:1 1050MHz 8MB 4:1 ECache
Enabling system bus....... CPU0 CPU1 CPU2 CPU3 Done
Initializing CPUs.........
Init ICache/etc........... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Tags.......... CPU0 CPU1 CPU2 CPU3 Done
Clearing TLBs............. CPU0 CPU1 CPU2 CPU3 Done
Setup I/DTLBs............. CPU0 CPU1 CPU2 CPU3 Done
Enabling Cache/MMUs....... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Data.......... CPU0 CPU1 CPU2 CPU3 Done
Initializing boot memory..
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 128KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.48b3.35b0; ROM CRC = 0000.0000.48b3.35b0
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.2c30 (460KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0 Done
Boot CPU3 starting Forth at 0000.0000.f000.00e0
Diagnostic console initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 3,0 SUNW,UltraSPARC-III+ (1050 MHz @ 7:1, 8 MB)
memory-controller
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Probing gptwo at 10,0 Nothing there
Probing gptwo at 11,0 Nothing there
Probing gptwo at 12,0 Nothing there
Probing gptwo at 13,0 Nothing there
Loading Support Packages: obp-tftp kbd-translator SUNW,i2c-ram-device
SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru
fru fru fru fru fru fru fru fru fru fru fru fru fru nvram idprom fru
fru i2c temperature temperature temperature ioexp ioexp ioexp
temperature ioexp ioexp ioexp ioexp temperature-sensor fru fru fru
fru fru rscrtc rtc gpio pmc rsc-control rsc-console serial
Memory Configuration:
CPU0 Bank0 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #0
CPU0 Bank1 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #2
CPU0 Bank2 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #4
CPU0 Bank3 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #6
CPU1 Bank0 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #0
CPU1 Bank1 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #2
CPU1 Bank2 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #4
CPU1 Bank3 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #6
CPU2 Bank0 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #1
CPU2 Bank1 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #3
CPU2 Bank2 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #5
CPU2 Bank3 256 + 256 + 256 + 256 : 1GB @ a000000000 8-way #7
CPU3 Bank0 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #1
CPU3 Bank1 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #3
CPU3 Bank2 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #5
CPU3 Bank3 256 + 256 + 256 + 256 : 1GB @ b000000000 8-way #7
Probing /pci@8,600000 Device 1 Nothing there
Probing /pci@8,600000 Device 2 Nothing there
Probing /pci@8,700000 Device 2 Nothing there
Probing /pci@8,700000 Device 3 Nothing there
Probing /pci@8,700000 Device 4 Nothing there
Probing /pci@8,700000 Device 5 Nothing there
Probing /pci@8,700000 Device 6 ide disk cdrom
Probing /pci@9,600000 Device 1 network
Probing /pci@9,600000 Device 2 SUNW,qlc fp disk
Probing /pci@9,700000 Device 1 usb
Probing /pci@9,700000 Device 2 network
Sun Fire 480R, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.15.1, 16384 MB memory installed, Serial #56428413.
Ethernet address 0:3:ba:5d:7:7d, Host ID: 835d077d.
Creating CPU memory layout properties.
Initializing 1MB of memory at addr b1ffb3c000 -
Initializing 1MB of memory at addr b1ffa38000 -
Initializing 11MB of memory at addr b1ff000000 -
Initializing 8176MB of memory at addr b000000000 -
Initializing 8GB of memory at addr a000000000 \|/-\|/-\|/-\|/-
Reading temperature limits from FRUPROMs: CPU0/2 CPU1/3 BACKPLANE
Environmental monitor is ON
Rebooting with command: boot
Boot device: net File and args:
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
/pci@9,700000/network@2: Timed out waiting for Auto-Negotation to complete
/pci@9,700000/network@2: Cannot establish link via Auto-Negotation
Please check cable and/or connection
/pci@9,700000/network@2: link down
Retrying network initialization
Evaluating:
Can't open boot device
{3} ok boot cdrom
Boot device: /pci@8,700000/ide@6/cdrom@0,0:f File and args:
SILO Version 1.4.14
\
----------------------------------------------------
Welcome to the Gentoo/Linux SPARC64 weekly InstallCD
----------------------------------------------------
boot: gentoo
Allocated 64 Megs of memory at 0x40000000 for kernel
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Loaded kernel version 2.6.33
Loading initial ramdisk (1940841 bytes at 0xB1FF000000 phys, 0x40C00000 virt)...
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
PROMLIB: Sun IEEE Boot Prom 'OBP 4.15.1 2004/06/02 16:06'
PROMLIB: Root node compatible:
Linux version 2.6.33-gentoo-r2 (root@bender) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0) ) #1 SMP Mon Jul 19 19:39:06 UTC 2010
bootconsole [earlyprom0] enabled
ARCH: SUN4U
Ethernet address: 00:03:ba:5d:07:7d
Kernel: Using 2 locked TLB entries for main kernel image.
Remapping the kernel... done.
OF stdout device is: /pci@9,700000/ebus@1/serial@1,400000:a
PROM: Built device tree with 108062 bytes of memory.
Top of RAM: 0xb1ffb38000, Total RAM: 0x3ffb24000
Memory hole size: 712704MB
[0000010140000000-fffff8a000400000] page_structs=131072 node=0 entry=1280/0
[0000010140000000-fffff8a000800000] page_structs=131072 node=0 entry=1281/0
[0000010140800000-fffff8a000c00000] page_structs=131072 node=0 entry=1282/0
[0000010140800000-fffff8a001000000] page_structs=131072 node=0 entry=1283/0
[0000010141000000-fffff8a001400000] page_structs=131072 node=0 entry=1284/0
[0000010141000000-fffff8a001800000] page_structs=131072 node=0 entry=1285/0
[0000010141800000-fffff8a001c00000] page_structs=131072 node=0 entry=1286/0
[0000010141800000-fffff8a002000000] page_structs=131072 node=0 entry=1287/0
[0000010142000000-fffff8a002400000] page_structs=131072 node=0 entry=1288/0
[0000010142000000-fffff8a002800000] page_structs=131072 node=0 entry=1289/0
[0000010142800000-fffff8a002c00000] page_structs=131072 node=0 entry=1290/0
[0000010142800000-fffff8a003000000] page_structs=131072 node=0 entry=1291/0
[0000010143000000-fffff8a003400000] page_structs=131072 node=0 entry=1292/0
[0000010143000000-fffff8a003800000] page_structs=131072 node=0 entry=1293/0
[0000010143800000-fffff8a003c00000] page_structs=131072 node=0 entry=1294/0
[0000010143800000-fffff8a004000000] page_structs=131072 node=0 entry=1295/0
[0000010160000000-fffff8a004400000] page_structs=131072 node=0 entry=1408/0
[0000010160000000-fffff8a004800000] page_structs=131072 node=0 entry=1409/0
[0000010160800000-fffff8a004c00000] page_structs=131072 node=0 entry=1410/0
[0000010160800000-fffff8a005000000] page_structs=131072 node=0 entry=1411/0
[0000010161000000-fffff8a005400000] page_structs=131072 node=0 entry=1412/0
[0000010161000000-fffff8a005800000] page_structs=131072 node=0 entry=1413/0
[0000010161800000-fffff8a005c00000] page_structs=131072 node=0 entry=1414/0
[0000010161800000-fffff8a006000000] page_structs=131072 node=0 entry=1415/0
[0000010162000000-fffff8a006400000] page_structs=131072 node=0 entry=1416/0
[0000010162000000-fffff8a006800000] page_structs=131072 node=0 entry=1417/0
[0000010162800000-fffff8a006c00000] page_structs=131072 node=0 entry=1418/0
[0000010162800000-fffff8a007000000] page_structs=131072 node=0 entry=1419/0
[0000010163000000-fffff8a007400000] page_structs=131072 node=0 entry=1420/0
[0000010163000000-fffff8a007800000] page_structs=131072 node=0 entry=1421/0
[0000010163800000-fffff8a007c00000] page_structs=131072 node=0 entry=1422/0
[0000010163800000-fffff8a008000000] page_structs=131072 node=0 entry=1423/0
Zone PFN ranges:
Normal 0x05000000 -> 0x058ffd9c
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x05000000 -> 0x05100000
0: 0x05800000 -> 0x058ff7ff
0: 0x058ff800 -> 0x058ffd1a
0: 0x058ffd1c -> 0x058ffd8d
0: 0x058ffd94 -> 0x058ffd9c
Booting Linux...
PERCPU: Embedded 6 pages/cpu @fffff8a008400000 s13312 r8192 d27648 u1048576
pcpu-alloc: s13312 r8192 d27648 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022806
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/image.squashfs cdroot
PID hash table entries: 4096 (order: 2, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
Memory: 16607576k available (3384k kernel code, 1312k data, 224k init) [fffff80000000000,000000b1ffb38000]
Hierarchical RCU implementation.
NR_IRQS:255
clocksource: mult[c8000000] shift[25]
clockevent: mult[28f5c28] shift[32]
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
PROMLIB: Sun IEEE Boot Prom 'OBP 4.15.1 2004/06/02 16:06'
PROMLIB: Root node compatible:
Linux version 2.6.33-gentoo-r2 (root@bender) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0) ) #1 SMP Mon Jul 19 19:39:06 UTC 2010
bootconsole [earlyprom0] enabled
ARCH: SUN4U
Ethernet address: 00:03:ba:5d:07:7d
Kernel: Using 2 locked TLB entries for main kernel image.
Remapping the kernel... done.
OF stdout device is: /pci@9,700000/ebus@1/serial@1,400000:a
PROM: Built device tree with 108062 bytes of memory.
Top of RAM: 0xb1ffb38000, Total RAM: 0x3ffb24000
Memory hole size: 712704MB
[0000010140000000-fffff8a000400000] page_structs=131072 node=0 entry=1280/0
[0000010140000000-fffff8a000800000] page_structs=131072 node=0 entry=1281/0
[0000010140800000-fffff8a000c00000] page_structs=131072 node=0 entry=1282/0
[0000010140800000-fffff8a001000000] page_structs=131072 node=0 entry=1283/0
[0000010141000000-fffff8a001400000] page_structs=131072 node=0 entry=1284/0
[0000010141000000-fffff8a001800000] page_structs=131072 node=0 entry=1285/0
[0000010141800000-fffff8a001c00000] page_structs=131072 node=0 entry=1286/0
[0000010141800000-fffff8a002000000] page_structs=131072 node=0 entry=1287/0
[0000010142000000-fffff8a002400000] page_structs=131072 node=0 entry=1288/0
[0000010142000000-fffff8a002800000] page_structs=131072 node=0 entry=1289/0
[0000010142800000-fffff8a002c00000] page_structs=131072 node=0 entry=1290/0
[0000010142800000-fffff8a003000000] page_structs=131072 node=0 entry=1291/0
[0000010143000000-fffff8a003400000] page_structs=131072 node=0 entry=1292/0
[0000010143000000-fffff8a003800000] page_structs=131072 node=0 entry=1293/0
[0000010143800000-fffff8a003c00000] page_structs=131072 node=0 entry=1294/0
[0000010143800000-fffff8a004000000] page_structs=131072 node=0 entry=1295/0
[0000010160000000-fffff8a004400000] page_structs=131072 node=0 entry=1408/0
[0000010160000000-fffff8a004800000] page_structs=131072 node=0 entry=1409/0
[0000010160800000-fffff8a004c00000] page_structs=131072 node=0 entry=1410/0
[0000010160800000-fffff8a005000000] page_structs=131072 node=0 entry=1411/0
[0000010161000000-fffff8a005400000] page_structs=131072 node=0 entry=1412/0
[0000010161000000-fffff8a005800000] page_structs=131072 node=0 entry=1413/0
[0000010161800000-fffff8a005c00000] page_structs=131072 node=0 entry=1414/0
[0000010161800000-fffff8a006000000] page_structs=131072 node=0 entry=1415/0
[0000010162000000-fffff8a006400000] page_structs=131072 node=0 entry=1416/0
[0000010162000000-fffff8a006800000] page_structs=131072 node=0 entry=1417/0
[0000010162800000-fffff8a006c00000] page_structs=131072 node=0 entry=1418/0
[0000010162800000-fffff8a007000000] page_structs=131072 node=0 entry=1419/0
[0000010163000000-fffff8a007400000] page_structs=131072 node=0 entry=1420/0
[0000010163000000-fffff8a007800000] page_structs=131072 node=0 entry=1421/0
[0000010163800000-fffff8a007c00000] page_structs=131072 node=0 entry=1422/0
[0000010163800000-fffff8a008000000] page_structs=131072 node=0 entry=1423/0
Zone PFN ranges:
Normal 0x05000000 -> 0x058ffd9c
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x05000000 -> 0x05100000
0: 0x05800000 -> 0x058ff7ff
0: 0x058ff800 -> 0x058ffd1a
0: 0x058ffd1c -> 0x058ffd8d
0: 0x058ffd94 -> 0x058ffd9c
Booting Linux...
PERCPU: Embedded 6 pages/cpu @fffff8a008400000 s13312 r8192 d27648 u1048576
pcpu-alloc: s13312 r8192 d27648 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022806
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/image.squashfs cdroot
PID hash table entries: 4096 (order: 2, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
Memory: 16607576k available (3384k kernel code, 1312k data, 224k init) [fffff80000000000,000000b1ffb38000]
Hierarchical RCU implementation.
NR_IRQS:255
clocksource: mult[c8000000] shift[25]
clockevent: mult[28f5c28] shift[32]
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
Calibrating delay using timer specific routine.. 20.03 BogoMIPS (lpj=10018)
Mount-cache hash table entries: 512
CPU 0: synchronized TICK with master CPU (last diff 0 cycles, maxerr 11 cycles)
CPU 1: synchronized TICK with master CPU (last diff -1 cycles, maxerr 11 cycles)
CPU 2: synchronized TICK with master CPU (last diff 0 cycles, maxerr 11 cycles)
Brought up 4 CPUs
NET: Registered protocol family 16
Testing NMI watchdog ... OK.
/pci@8,700000: SCHIZO PCI Bus Module ver[7:0]
/pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000]
PCI: Scanning PBM /pci@8,700000
/pci@8,600000: SCHIZO PCI Bus Module ver[7:0]
/pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000]
PCI: Scanning PBM /pci@8,600000
/pci@9,700000: SCHIZO PCI Bus Module ver[7:0]
/pci@9,700000: PCI IO[7ffeb000000] MEM[7fc00000000]
PCI: Scanning PBM /pci@9,700000
/pci@9,600000: SCHIZO PCI Bus Module ver[7:0]
/pci@9,600000: PCI IO[7ffe9000000] MEM[7fb00000000]
PCI: Scanning PBM /pci@9,600000
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
/pci@9,700000/ebus@1/rtc@1,300070: RTC regs at 0x7fc7e300070
Switching to clocksource stick
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 9, 4194304 bytes)
TCP established hash table entries: 524288 (order: 10, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 5, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 5, 262144 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1895k freed
power: Control reg at 7fc7e30002e
chmc: UltraSPARC-III memory controller at /memory-controller@0,400000 [ACTIVE]
chmc: UltraSPARC-III memory controller at /memory-controller@1,400000 [ACTIVE]
chmc: UltraSPARC-III memory controller at /memory-controller@2,400000 [ACTIVE]
chmc: UltraSPARC-III memory controller at /memory-controller@3,400000 [ACTIVE]
HugeTLB registered 4 MB page size, pre-allocated 0 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 32441
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
f00aa094: ttyS0 at MMIO 0x7fc7e3062f8 (irq = 13) is a 16550A
f00ab8a4: ttyS1 at MMIO 0x7fc7e3083f8 (irq = 14) is a 16550A
f00ad0b4: ttyS2 at MMIO 0x7fc7e400000 (irq = 15) is a SAB82532 V3.2
Console: ttyS2 (SAB82532)
console [ttyS0] enabled
f00ad0b4: ttyS3 at MMIO 0x7fc7e400040 (irq = 15) is a SAB82532 V3.2
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
cmd64x 0000:00:06.0: IDE controller (0x1095:0x0646 rev 0x07)
cmd64x 0000:00:06.0: IDE port disabled
cmd64x 0000:00:06.0: 100% native mode on irq 5
ide0: BM-DMA at 0x7ffef000320-0x7ffef000327
hda: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
hda: UDMA/33 mode selected
ide0 at 0x7ffef000300-0x7ffef000307,0x7ffef00031a on irq 5 (serialized)
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 24X DVD-ROM drive, 192kB Cache
Uniform CD-ROM driver Revision: 3.20
megasas: 00.00.04.12-rc1 Thu Sep. 17 11:41:51 PST 2009
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
Fusion MPT FC Host driver 3.04.13
Fusion MPT SAS Host driver 3.04.13
Fusion MPT misc device (ioctl) driver 3.04.13
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: no alarms, 114 bytes nvram
NET: Registered protocol family 17
rtc_cmos rtc_cmos: setting system clock to 2010-08-13 11:48:29 UTC (1281700109)
ü[32;1m>>[0;39m[1m Loading modules [0;39m
[1m ::[0;39m Scanning for sata_promise...sata_promise loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for sata_sil...sata_sil loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for sata_sil24...sata_sil24 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for sata_via...sata_via loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for sata_sx4...sata_sx4 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for ahci...ahci loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for aic7xxx...aic7xxx loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for qla2xxx...qla2xxx loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for ehci-hcd...usbcore, ehci-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for usb-storage...usb-libusual, usb-storage loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for uhci-hcd...uhci-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for ohci-hcd...ohci-hcd loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for usbhid...usbhid loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for scsi_wait_scan...scsi_wait_scan loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mod...dm-mod loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mirror...dm-log, dm-region-hash, dm-mirror loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mod...[0G[0K[0;39m[1m ::[0;39m Scanning for dm-snapshot...dm-snapshot loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for dm-mirror...[0G[0K[0;39m[1m ::[0;39m Scanning for dm-bbr...dm-bbr loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for raid0...md-mod, raid0 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for raid1...raid1 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for raid456...async_tx, xor, async_xor, raid6_pq, async_pq, async_memcpy, async_raid6_recov, raid456 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for raid10...raid10 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for nfs...sunrpc, lockd, nfs_acl, auth_rpcgss, nfs loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for fuse...fuse loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for e1000...e1000 loaded.
[0G[0K[0;39m[1m ::[0;39m Scanning for tg3...libphy, tg3 loaded.
[0G[0K[0;39m[32;1m>>[0;39m[1m Activating mdev [0;39m
[32;1m>>[0;39m[1m Making tmpfs for /newroot [0;39m
[32;1m>>[0;39m[1m Looking for the cdrom [0;39m
[32;1m>>[0;39m[1m Attempting to mount media:- /dev/sda [0;39m
[32;1m>>[0;39m[1m Attempting to mount media:- /dev/sdb [0;39m
[32;1m>>[0;39m[1m Attempting to mount media:- /dev/hda [0;39m
[32;1m>>[0;39m[1m Media found on /dev/hda [0;39m
[32;1m>>[0;39m[1m Determining root device... [0;39m
[32;1m>>[0;39m[1m Determining looptype ... [0;39m
[32;1m>>[0;39m[1m Mounting squashfs filesystem [0;39m
[32;1m>>[0;39m[1m Copying read-write image contents to tmpfs [0;39m
[32;1m>>[0;39m[1m No cdupdate.sh script found, skipping... [0;39m
[32;1m>>[0;39m[1m Booting (initramfs)[0;39m[1m.[0;39m[1m.[0;39m
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2009 Gentoo Foundation; Distributed under the GPLv2
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting /dev ... [ ok ]
* Starting udevd ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Waiting for uevents to be processed ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Starting up RAID devices ...mdadm: No arrays found in config file or automatically
[ !! ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possible) swap ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Updating inittab ... [ ok ]
* Caching service dependencies ... [ ok ]
* Setting hostname to livecd ... [ ok ]
* Starting lo
* Bringing up lo
* 127.0.0.1/8
[ ok ]
* Adding routes
* 127.0.0.0/8 ... [ ok ]
* Initializing random number generator ... [ ok ]
Entering runlevel: 3
* Starting syslog-ng ... [ ok ]
* Hardware detection started ...
* Detected 4 active UltraSparc III+ (Cheetah+) CPU(s) of 4 total
[ ok ]
* Unpacking firmware ... [ ok ]
AT
* Not Loading APM Bios support ...
* Not Loading ACPI support ...
* Running hdparm on /dev/hda ... [ ok ]
* Network device eth0 detected, DHCP broadcasting for IP ...
* Network device eth1 detected, DHCP broadcasting for IP ...
* Starting portmap ... [ ok ]
* ERROR: cannot start nfsmount as rpc.statd could not start
* Auto-scrambling root password for security ... [ ok ]
* Starting local ... [ ok ] |
|
|
| Back to top |
|
 |
richard.scott
Veteran
Joined: 19 May 2003
Posts: 1497
Location: Oxfordshire, UK
|
| Posted: Thu Aug 26, 2010 9:14 am Post subject: |
|
|
you need to uncomment the Sx line in /etc/inittab once the livecd is booted and the reload it with 'init q'
(where x is the number of the port you want to use)
otherwise there will be nothing listening on that comp port for your connections via the serial cable. |
|
| Back to top |
|
|
JFGI_123
n00b
Joined: 03 Sep 2010
Posts: 17
|
| Posted: Fri Sep 03, 2010 12:39 pm Post subject: |
|
|
I had exactly the same issue with a 280R which also had an RSC card in it
Workaround:
Remove the RSC and the livecd boots
I've got a Wyse terminal attached to the serial port so I can use that instead of the RSC
Going to move onto building it and see if I can put the RSC card back in |
|
| Back to top |
|
|
ilikeit
n00b
Joined: 06 Jun 2004
Posts: 28
Location: France (07)
|
| Posted: Sun Sep 05, 2010 5:47 pm Post subject: |
|
|
richard.scott: that inittab line was indeed commented, but i couldn't access to the machine to edit the file.
Removing the RSC card did the trick, thanks JFGI! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on Sparc
