View previous topic :: View next topic |
Author |
Message |
natalizi n00b
Joined: 13 Feb 2007 Posts: 17 Location: Rio de Janeiro - Brasil
|
Posted: Thu Apr 08, 2010 3:24 pm Post subject: HOWTO D-Link DWA-125 wireless usb adapter |
|
|
Based on (in portuguese): http://www.vivaolinux.com.br/topico/Debian/Dlink-DWA-125-1
1. Install the packages madwifi-ng-tools, wireless-tools, wpa_supplicant
For package wpa_supplicant enable madwifi as use flag
2. Download de linux driver in ftp://www.dlinkla.com/pub/drivers/DWA-125/
Extract the file for a local folder, for example using:
Code: | tar -xzvf <path to the file> |
3. Install the driver
As root, enter the folder extracted an run:
4. Plug the adpater on USB
Verify if the module rt3070sta (or similar) is loaded, with command:
5. Restart dbus
Code: | /etc/init.d/dbus restart |
6. Edit /etc/conf.d/net
This is my example (using wpa):
Code: | modules=( "wpa_supplicant" )
wpa_supplicant_ra0="-Dwext"
config_ra0=( "dhcpcd" ) |
7. Create or edit /etc/wpa_supplicant/wpa_supplicant.conf
This is my example:
Code: | update_config=1
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
ssid="YOURNETWORKNAME"
key_mgmt=WPA-PSK
psk="YOURPASSPHRASE"
priority=5
} |
8. Create the service net.ra0 with command:
Code: | ln -s net.lo /etc/init.d/net.ra0 |
9. Start the service and get connected with:
Code: | /etc/init.d/net.ra0 start |
10. Setting the connection to start at boot
Edit the line below in file /etc/conf.d/rc
Code: | RC_PLUG_SERVICES="!net.eth* net.ra0"
# Option !net.eth* avoid other network adapters to start - use wisely
# Option net.ra0 start the adpator at boot, initiating connection |
_________________ Daniel Natalizi |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54276 Location: 56N 3W
|
Posted: Thu Apr 08, 2010 5:36 pm Post subject: |
|
|
Moved from Networking & Security to Documentation, Tips & Tricks. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
rlittle Apprentice
Joined: 17 Dec 2003 Posts: 200
|
Posted: Tue Feb 15, 2011 3:42 am Post subject: |
|
|
I downloaded 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO from the RT site
I had to add one step to get it to load the module (rt3070sta)
add:
Code: | MODULE_LICENSE("GPL"); |
to 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO/os/linux/usb_main_dev.c
If I didn't, I got:
Code: | rt3070sta: Unknown symbol usb_alloc_urb (err 0)
rt3070sta: Unknown symbol usb_free_urb (err 0)
rt3070sta: Unknown symbol usb_alloc_coherent (err 0)
rt3070sta: Unknown symbol usb_register_driver (err 0)
rt3070sta: Unknown symbol usb_put_dev (err 0)
rt3070sta: Unknown symbol usb_get_dev (err 0)
rt3070sta: Unknown symbol usb_submit_urb (err 0)
rt3070sta: Unknown symbol usb_free_coherent (err 0)
rt3070sta: Unknown symbol usb_control_msg (err 0)
rt3070sta: Unknown symbol usb_deregister (err 0)
rt3070sta: Unknown symbol usb_kill_urb (err 0)
|
whenever I tried to load the module. _________________ I need a better signature... |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|