openoffice-ximian-1.1.0 [now osbolete]

Message

kKDu · Post by **kKDu** » Tue Oct 14, 2003 7:34 pm

Have you set

PKGDIR=/usr/packages/

in /etc/make.conf?

liebenow · Post by **liebenow** » Tue Oct 14, 2003 8:12 pm

Thanks for the binary Nylle,
Seeing as how I relly don't want to start downgrading to GCC-3.2.3 and thats what it takes to fix copy/cut bug... You're binaries are a real life saver.

Nylle · Post by **Nylle** » Wed Oct 15, 2003 2:38 am

dufnutz wrote:hmmm, i noticed that /usr/packages/ALL thing on your page, i tried doing that but i still receive the same category error, any idea what i am doing wrong?

You're path is wrong, and so is the path in my README, it should be /usr/portage/packages/All/. I'll change it tomorrow.

Actually, to really play nice with portage, you should put it in /usr/portage/packages/app-office/ and just try to emerge it with emerge -K openoffice-ximian.

schoett · Post by **schoett** » Wed Oct 15, 2003 4:57 am

schoett wrote:My idea would be to remove net-libs/linc and then rebuild openoffice. My guess is that the liblinc dependency only occurred because that library happened to still be around after the big gnome upgrade.

The plan seems to have worked - after

Code: Select all

emerge -C net-libs/linc
emerge --deep /usr/local/portage/app-office/openoffice-ximian/openoffice-ximian-1.1.0-r2.ebuild

I now have an openoffice-ximian that works without liblinc.so

The ebuild is from an earlier Posting in this thread; my recommendation ist not to install it under /usr/portage (where it will be wiped by the next emerge sync), but under /usr/local/portage, which will not be wiped and can be activated with

Code: Select all

PORTDIR_OVERLAY=/usr/local/portage

in /etc/make.conf

Koon · Post by **Koon** » Wed Oct 15, 2003 12:25 pm

You should put the tbz2 file in : /usr/portage/packages/app-office
or <wherever your PKGDIR is>/app-office.

-K

Nylle · Post by **Nylle** » Wed Oct 15, 2003 1:22 pm

Ok, now I've uploaded a -r2 version of the 0.9.6 build as well and updated the README with some clearer installation instructions.

So, you can still get it at
http://www.update.uu.se/~adde/oo/

Both builds will run on a Pentium Pro or better, and they don't suffer from the copy & paste problem.

darkcoder · Post by **darkcoder** » Thu Oct 16, 2003 3:37 am

Thanks suka for the ebuild... after patching findutils work like a charm, even with pentium4 optimization.

In the topic of Copy/Paste in gcalc (haven't read all posts on the list, so maybe you already know this), but seen that the Copy/Paste operation is not performed if I click the cell, then perform the operation. But if I click the cell, select its contents and perform the Copy/Paste operation, it completes without problem

masterpe · Post by **masterpe** » Thu Oct 16, 2003 11:47 am

After a short while compiling I get this error:

Making: ../unxlngi4.pro/obj/pr.obj
gcc -fmessage-length=0 -c -I. -I. -I../inc -I../inc -I../unx/inc -I../unxlngi4.pro/inc -I. -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solver/645/unxlngi4.pro/inc/dont_use_stl -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solver/645/unxlngi4.pro/inc/external -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solver/645/unxlngi4.pro/inc -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solenv/unxlngi4/inc -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solenv/inc -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/res -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solver/645/unxlngi4.pro/inc/dont_use_stl -I/var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/solenv/inc/Xp31 -I/opt/blackdown-jdk-1.4.1/include -I/opt/blackdown-jdk-1.4.1/include/linux -I/opt/blackdown-jdk-1.4.1/include/native_threads/include -I/usr/X11R6/include -I. -I../res -I. -mcpu=athlon-xp -march=athlon-xp -O2 -pipe -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER -pipe -mcpu=pentiumpro -DLINUX -DUNX -DVCL -DGCC -DC300 -DINTEL -DCVER=C300 -D_USE_NAMESPACE -DGLIBC=2 -DX86 -D_PTHREADS -D_REENTRANT -DNEW_SOLAR -D_USE_NAMESPACE=1 -DSTLPORT_VERSION=400 -D__DMAKE -DUNIX -DCPPU_ENV=gcc3 -DSUPD=645 -DPRODUCT -DNDEBUG -DPRODUCT_FULL -DOSL_DEBUG_LEVEL=0 -DOPTIMIZE -DEXCEPTIONS_OFF -DCUI -DSOLAR_JAVA -DSRX645 -DNO_X11 -DXP_PC -DHW_THREADS -DINCLUDEDIR=\".\" -DSINGLETHREAD -o ../unxlngi4.pro/obj/pr.o pr.c
if ( -e ../unxlngi4.pro/obj/pr.o) touch ../unxlngi4.pro/obj/pr.obj
------------------------------
Making: ../unxlngi4.pro/bin/makedepend
unx
xargs: environment is too large for exec
dmake: Error code 1, while making '../unxlngi4.pro/bin/makedepend'
---* TG_SLO.MK *---

ERROR: Error 65280 occurred while making /var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/soltools/mkdepend

!!! ERROR: app-office/openoffice-ximian-1.1.0-r2 failed.
!!! Function src_compile, Line 462, Exitcode 1
!!! Build failed!

My system info is the following:

Portage 2.0.49-r13 (default-x86-1.4, gcc-3.3.1, glibc-2.3.2-r6, 2.4.22)
=================================================================
System uname: 2.4.22 i686 AMD Athlon(tm) XP 2700+
Gentoo Base System version 1.4.3.11
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CFLAGS="-mcpu=athlon-xp -march=athlon-xp -O2 -pipe"
CHOST="i686-pc-linux-gnu"
COMPILER="gcc3"
CONFIG_PROTECT="/etc /var/qmail/control /usr/kde/2/share/config /usr/kde/3/share/config /usr/X11R6/lib/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/gconf /etc/env.d"
CXXFLAGS="-mcpu=athlon-xp -march=athlon-xp -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="sandbox ccache autoaddcvs"
GENTOO_MIRRORS="ftp://ftp.snt.utwente.nl/pub/linux/gentoo"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 oss apm avi crypt encode foomaticdb gif jpeg libg++ libwww mad mikmod mpeg ncurses nls pdflib png quicktime truetype xml2 xmms xv zlib directfb gtkhtml gdbm berkdb slang readline aalib bonobo svga tcltk java guile sdl gpm tcpd pam ssl perl python esd imlib oggvorbis gtk motif opengl mozilla gphoto2 cdr X cups usb gtk2 gnome -spell -qt -kde -arts"

openoffice-ximian-1.1.0-r1 went fine.
Any thoughts?

jack_mort · Post by **jack_mort** » Thu Oct 16, 2003 1:14 pm

Argh, i was just about to post my problem, when i saw this post. I've exactly the same compilation error, wichever CFLAGS I tried (I changed a bit my CFLAGS between r1 and r2).

It's "good" to see I'm not alone

BTW, I use GCC 3.3.1-r5, upgraded yesterday from 3.3.1-r4 which gave me the same error.

darkcoder · Post by **darkcoder** » Fri Oct 17, 2003 1:58 am

masterpe wrote

Making: ../unxlngi4.pro/bin/makedepend
unx
xargs: environment is too large for exec
dmake: Error code 1, while making '../unxlngi4.pro/bin/makedepend'
---* TG_SLO.MK *---

ERROR: Error 65280 occurred while making /var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/soltools/mkdepend

!!! ERROR: app-office/openoffice-ximian-1.1.0-r2 failed.
!!! Function src_compile, Line 462, Exitcode 1
!!! Build failed!

Probably you perform an emerge -u and the patched findutils was replaced. I got a similar error on all openoffice ebuilds until make a patched findutils ebuild, after that everything works fine.

antibiotic · Post by **antibiotic** » Fri Oct 17, 2003 2:37 am

Can anyone check if you guys have formula editor working properly? I mean, I'm getting symbol problems, instead of =,>,<,- and all those symbols I;m getting huge empty spaces

Ari Rahikkala · Post by **Ari Rahikkala** » Fri Oct 17, 2003 6:39 am

antibiotic: Yep, they're definitely wrong here. Letters and numbers work but most other characters (such as the ones you mentioned) create... um... some weird thingies that remind me of Wingdings (I can see stuff like a Mona Lisa and some orbits) and aren't spaced apart at all (they just stack on top of each other). Is this a known bug?

jack_mort · Post by **jack_mort** » Fri Oct 17, 2003 8:13 am

darkcoder wrote:masterpe wrote
Making: ../unxlngi4.pro/bin/makedepend
unx
xargs: environment is too large for exec
dmake: Error code 1, while making '../unxlngi4.pro/bin/makedepend'
---* TG_SLO.MK *---

ERROR: Error 65280 occurred while making /var/tmp/portage/openoffice-ximian-1.1.0-r2/work/oo_1.1_src/soltools/mkdepend

!!! ERROR: app-office/openoffice-ximian-1.1.0-r2 failed.
!!! Function src_compile, Line 462, Exitcode 1
!!! Build failed!
Probably you perform an emerge -u and the patched findutils was replaced. I got a similar error on all openoffice ebuilds until make a patched findutils ebuild, after that everything works fine.

Oh well it may be my case

Which findutils version is the good one ?

Nadhor · Post by **Nadhor** » Fri Oct 17, 2003 8:55 am

I'm using a german version of openoffice-ximian-r2 (by the way it compiled really nice) and experienced the same problem.
I solved it by copying /opt/OpenOffice.org/share/fonts/truetype/opens___.ttf to /usr/X11R6/lib/X11/fonts/truetype and running "/etc/init.d/xfs restart".
Simply inserting:
FontPath "/opt/OpenOffice.org/share/fonts/truetype/"
into the Section "Files" of your XF86Config and restarting xfs should also do the trick.

Torsten

Apolonius · Post by **Apolonius** » Fri Oct 17, 2003 1:40 pm

Thx Nadhor !!
By the way, your tip makes display the right bullets in the numberings/bullets toolbox

antibiotic · Post by **antibiotic** » Fri Oct 17, 2003 2:40 pm

Nadhor, thanks for tip, I'll try it once I reemerge

kKDu · Post by **kKDu** » Fri Oct 17, 2003 10:37 pm

wow, the best tip ever in this thread

antibiotic · Post by **antibiotic** » Sat Oct 18, 2003 2:38 am

Yes! it worked.

Thanks Nadhor!

Cheers,

SirJoltalot · Post by **SirJoltalot** » Sat Oct 18, 2003 6:37 am

jack_mort wrote:

Oh well it may be my case. Which findutils version is the good one ?

I don't think it's in the portage tree any more. You can apply this patch to your findutils (4.1.20 was the version I applied to):

Code: Select all

diff -ruN findutils-4.1.20.orig/xargs/xargs.c findutils-4.1.20/xargs/xargs.c
--- findutils-4.1.20.orig/xargs/xargs.c 2003-10-17 13:14:07.000000000 -0400
+++ findutils-4.1.20/xargs/xargs.c      2003-10-17 13:21:41.000000000 -0400
@@ -300,8 +300,10 @@
      have it at 1 meg).  Things will work fine with a large ARG_MAX but it
      will probably hurt the system more than it needs to; an array of this
      size is allocated.  */
+#if 0
   if (arg_max > 20 * 1024)
     arg_max = 20 * 1024;
+#endif
  
   /* Take the size of the environment into account.  */
   arg_max -= env_size (environ);

Save that in a file in /usr/portage/sys-apps/findutils/files as findutils-environment.patch, then edit the findutils-4.1.20 ebuild (I just copied mine to findutils-4.1.20-r1) and add a line

Code: Select all

    epatch ${FILESDIR}/findutils-environment.patch

to the ebuild in the src_unpack function, after the sed for Makefile.in.

Now, rebuild the digest by running

Code: Select all

ebuild /usr/portage/sys-apps/findutils/findutils-4.1.20-r1.ebuild digest

and finally, emerge -u findutils.

That fixed the xargs problem for me. I also had another build error fixed by adding nptl to my USE in make.conf.

Has anybody noticed that bullets don't work in this version? I hope it's not just me.. but I turn on bullets using the button on the toolbar or the option in the menu, and all I get is grey boxes. PDF export also shows no bullets.

I know Ximian has their own special font for bullets, and there's also a weird mapping from the internal symbol characters to the displayed symbol characters to make certain characters look better on Linux.. so this is probably the source of the problem.

I'd really like to see this go into the main tree as well, and I'm willing to put in time to migrate to the Ximian build system (I suspect this and the copy/paste problems might be a result of the non-standard build). I have a bit of experience packaging Ximian OO.o in RedHat for stuff I do at work, so if anybody's interested let me know at sirjoltalot@yahoo.com.

kKDu · Post by **kKDu** » Sat Oct 18, 2003 10:24 am

Has anybody noticed that bullets don't work in this version? I hope it's not just me.. but I turn on bullets using the button on the toolbar or the option in the menu, and all I get is grey boxes.

See above:

Nadhor: I solved it by copying /opt/OpenOffice.org/share/fonts/truetype/opens___.ttf to /usr/X11R6/lib/X11/fonts/truetype

[...]

Apolonius: Thx Nadhor !!
By the way, your tip makes display the right bullets in the numberings/bullets toolbox

Nadhor · Post by **Nadhor** » Sat Oct 18, 2003 10:51 am

To suka:
Because a lot of people (all?) seem to have problems with missing bulletts and wrong symbols in OOmath, perhaps it would be possible to add some lines to the ebuild like:

Code: Select all

        cd ${S}/extra/source/truetype/symbol
        insinto /usr/X11R6/lib/X11/fonts/truetype
        # or wherever best installed
        doins *.ttf

somewhere under src_install() and under pkg_postinst() something like:

Code: Select all

        if [ "${ROOT}" = "/" ] &&  [ -x /usr/bin/fc-cache ]
        then
                echo
                einfo "Creating font cache..."
                HOME="/root" /usr/bin/fc-cache -f
        fi

(borrowed from the ttf-bitstream-vera ebuild)?

george · Post by **george** » Sat Oct 18, 2003 4:15 pm

TinheadNed wrote:I've found the bmp file, and it's in sw/win/imglst as the log shows it's looking in.

I don't know if this will help as I haven't got a log to check through myself, but if the bmp file is produced just before it's looked for then this might be worth a go....

I found (while building gramps fwiw) that make would trip over itself when sorting out the language files and do some operations out of order. This meant that it would try and work on a file before it had finished being created. I fixed it my changing MAKEOPTS from "-j2" to "-j1".

SaFrOuT · Post by **SaFrOuT** » Sat Oct 18, 2003 4:36 pm

i have a small and maybe silly q here

what is the dif betwen the normal OO and the ximian version

Nadhor · Post by **Nadhor** » Sat Oct 18, 2003 4:57 pm

SaFrOuT wrote:i have a small and maybe silly q here

what is the dif betwen the normal OO and the ximian version

http://www.ximian.com/products/desktop/ ... openoffice

Stu L Tissimus · Post by **Stu L Tissimus** » Sat Oct 18, 2003 5:06 pm

Suka, just a question... Is your name Hindu? We're studying India right now in history, and I remember they said something about Suka... or am I thinking about the tent I had to put up a week ago... o_O

openoffice-ximian-1.1.0 [now osbolete]

Crash log on Ximian-OO-r2 compile

Strange fonts in formulas

Findutils