| View previous topic :: View next topic |
| Author |
Message |
cfgauss
Apprentice
Joined: 18 May 2005
Posts: 265
Location: USA
|
 Posted: Mon Jul 20, 2009 1:15 am Post subject: [SOLVED] e2fsprogs blocks util-linux |
 |
|
I have a stable AMD64 with portage 2.1.6.13 and get this error when emerging util-linux: | Code: | ramanujan:/etc/conf.d# emerge -uDp util-linux
Calculating dependencies... done!
[ebuild U ] sys-apps/util-linux-2.16 [2.15.1]
[uninstall ] sys-libs/e2fsprogs-libs-1.41.3-r1
[blocks b ] <sys-libs/e2fsprogs-libs-1.41.8 ("<sys-libs/e2fsprogs-libs-1.41.8" is blocking sys-apps/util-linux-2.16)
[blocks B ] <sys-fs/e2fsprogs-1.41.8 ("<sys-fs/e2fsprogs-1.41.8" is blocking sys-apps/util-linux-2.16)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
('ebuild', '/', 'sys-apps/util-linux-2.16', 'merge') pulled in by
util-linux
('installed', '/', 'sys-fs/e2fsprogs-1.41.3-r1', 'nomerge') pulled in by
sys-fs/e2fsprogs required by world |
How do I resolve this? Thanks.
[SOLVED] See McNerl's solution, below. [/SOLVED]
Last edited by cfgauss on Tue Jul 21, 2009 2:45 pm; edited 1 time in total |
|
| Back to top |
|
 |
NathanZachary
Moderator
Joined: 30 Jan 2007
Posts: 2281
Location: /home/zach
|
| Posted: Mon Jul 20, 2009 1:49 am Post subject: |
|
|
Please post the output of emerge --info, and also please try doing another --sync.
_________________
“Truth, like infinity, is to be forever approached but never reached.” --Jean Ayres (1972)
---avatar cropped from =AimanStudio--- |
|
| Back to top |
|
|
cfgauss
Apprentice
Joined: 18 May 2005
Posts: 265
Location: USA
|
| Posted: Mon Jul 20, 2009 2:45 am Post subject: |
|
|
| kalos wrote: | | Please post the output of emerge --info, and also please try doing another --sync. |
I synced just before the emerge and synced again with the same result immediately afterward.
| Code: | # emerge --info
Portage 2.1.6.13 (default/linux/amd64/2008.0, gcc-4.1.2, glibc-2.9_p20081201-r2, 2.6.28-gentoo-r5 x86_64)
=================================================================
System uname: Linux-2.6.28-gentoo-r5-x86_64-AMD_Turion-tm-_64_Mobile_Technology_ML-34-with-glibc2.2.5
Timestamp of tree: Mon, 20 Jul 2009 02:15:01 +0000
app-shells/bash: 3.2_p39
dev-java/java-config: 1.3.7-r1, 2.1.7
dev-lang/python: 2.4.4-r9, 2.5.4-r3
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox: 1.6-r2
sys-devel/autoconf: 2.13, 2.63
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10.2
sys-devel/binutils: 2.18-r3
sys-devel/gcc-config: 1.4.1
sys-devel/libtool: 2.2.6a
virtual/os-headers: 2.6.27-r2
ACCEPT_KEYWORDS="amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-march=k8 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://mirror.datapipe.net/gentoo"
LDFLAGS="-Wl,-O1"
LINGUAS="en"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.us.gentoo.org/gentoo-portage"
USE="X acl acpi alsa amd64 arts berkdb bzip2 cdr cli cracklib crypt cups dri dvd fortran gdbm gpm gtk hal iconv ipv6 isdnlog kde kdeenablefinal laptop midi mmx mudflap multilib ncurses nls nptl nptlonly nsplugin opengl openmp pam pcre perl pppd python qt qt3 readline reflection session spl sse sse2 ssl symlink sysfs tcpd unicode xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="access auth auth_dbm auth_anon auth_digest alias file-cache echo charset-lite cache disk-cache mem-cache ext-filter case_filter case-filter-in filter deflate mime-magic cern-meta expires headers usertrack unique-id proxy proxy-connect proxy-ftp proxy-http info include cgi cgid dav dav-fs vhost-alias speling rewrite log_config logio env setenvif mime status autoindex asis negotiation dir imap actions userdir so authz_host" ELIBC="glibc" INPUT_DEVICES="keyboard mouse synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" USERLAND="GNU" VIDEO_CARDS="sis"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY |
|
|
| Back to top |
|
|
aych
Guru
Joined: 20 May 2004
Posts: 304
|
| Posted: Mon Jul 20, 2009 5:30 am Post subject: |
|
|
| I too have this exact problem. Have tried unmerging and reemerging to no avail |
|
| Back to top |
|
|
VoidMage
Advocate
Joined: 14 Oct 2006
Posts: 4058
|
| Posted: Mon Jul 20, 2009 9:01 am Post subject: |
|
|
Try 'emerge -1pv util-linux e2fsprogs' instead.
The block are because now util-linux will be providing
libuuid and libblkid, that were provided by e2fsprogs-libs before. |
|
| Back to top |
|
|
theotherjoe
Apprentice
Joined: 22 Nov 2003
Posts: 268
|
| Posted: Mon Jul 20, 2009 9:35 am Post subject: |
|
|
upgrading to util-linux-2.16 allows
e2fsprogs-libs-1.14.8 to compile/link properly, but
e2fsprogs-1.14.8 still craps out:
| Code: |
* ERROR: sys-fs/e2fsprogs-1.41.8 failed.
* Call stack:
* ebuild.sh, line 49: Called src_install
* environment, line 2584: Called gen_usr_ldscript '-a' 'e2p' 'ext2fs'
* environment, line 1518: Called die
* The specific snippet of code:
* [[ -z ${tlib} ]] && die "unable to read SONAME from ${lib}";
* The die message:
* unable to read SONAME from libe2p.so
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/home/tmp/portage/sys-fs/e2fsprogs-1.41.8/temp/build.log'.
* The ebuild environment file is located at '/home/tmp/portage/sys-fs/e2fsprogs-1.41.8/temp/environment'.
|
any idea?
EDIT: re-ran emerge --sync and emerge e2fsprogs.
works fine now, wonder what went on there.
Last edited by theotherjoe on Mon Jul 20, 2009 10:07 am; edited 1 time in total |
|
| Back to top |
|
|
Silenzium
Tux's lil' helper
Joined: 04 Aug 2005
Posts: 94
Location: Germany
|
| Posted: Mon Jul 20, 2009 9:36 am Post subject: |
|
|
| VoidMage wrote: | Try 'emerge -1pv util-linux e2fsprogs' instead.
The block are because now util-linux will be providing
libuuid and libblkid, that were provided by e2fsprogs-libs before. |
That worked for me, thanks. |
|
| Back to top |
|
|
cfgauss
Apprentice
Joined: 18 May 2005
Posts: 265
Location: USA
|
| Posted: Mon Jul 20, 2009 2:34 pm Post subject: |
|
|
| VoidMage wrote: | Try 'emerge -1pv util-linux e2fsprogs' instead.
The block are because now util-linux will be providing
libuuid and libblkid, that were provided by e2fsprogs-libs before. |
Here's what I get:
| Code: | # emerge -1pv util-linux e2fsprogs
Calculating dependencies... done!
[ebuild U ] sys-apps/util-linux-2.16 [2.15.1] USE="crypt nls unicode -loop-aes -old-linux (-selinux) -slang (-uclibc)" 3,389 kB
[ebuild R ] sys-fs/e2fsprogs-1.41.3-r1 USE="nls" 0 kB
[blocks B ] <sys-fs/e2fsprogs-1.41.8 ("<sys-fs/e2fsprogs-1.41.8" is blocking sys-apps/util-linux-2.16)
[blocks B ] <sys-libs/e2fsprogs-libs-1.41.8 ("<sys-libs/e2fsprogs-libs-1.41.8" is blocking sys-apps/util-linux-2.16)
Total: 2 packages (1 upgrade, 1 reinstall), Size of downloads: 3,389 kB
Conflict: 2 blocks (2 unsatisfied)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
('ebuild', '/', 'sys-apps/util-linux-2.16', 'merge') pulled in by
util-linux
('ebuild', '/', 'sys-fs/e2fsprogs-1.41.3-r1', 'merge') pulled in by
e2fsprogs |
In an older thread, http://forums.gentoo.org/viewtopic-t-712898.html, something like
| Code: | # emerge -f e2fsprogs e2fsprogs-libs util-linux
# emerge --unmerge e2fsprogs e2fsprogs-libs util-linux
# emerge e2fsprogs e2fsprogs-libs util-linux |
is suggested.
Will that work? Is it safe to unmerge e2fsprogs, e2fsprogs-lib, and util-linux? |
|
| Back to top |
|
|
myceliv
Apprentice
Joined: 29 Nov 2007
Posts: 178
|
| Posted: Mon Jul 20, 2009 3:21 pm Post subject: |
|
|
Not sure if there's a better way, but yes, that's what I just ended up doing. (fetch, unmerge, merge new).
I would make sure to also still have the old e2fsprogs and e2fsprogs-libs tar.gz's fetched in /usr/portage/distfiles, too, so you can re-emerge them if needed. Version 1.3 of the e2fsprogs-1.41.8 ebuild did not work for me, so if needed re-sync so you're using >= Version-1.4 of e2fsprogs-1.41.8.ebuild. |
|
| Back to top |
|
|
VoidMage
Advocate
Joined: 14 Oct 2006
Posts: 4058
|
| Posted: Mon Jul 20, 2009 5:12 pm Post subject: |
|
|
Then perhaps 'emerge -1pv util-linux e2fsprogs e2fsprogs-libs' will work.
I can't really tell, cause I did that upgrade while it was still masked. |
|
| Back to top |
|
|
cfgauss
Apprentice
Joined: 18 May 2005
Posts: 265
Location: USA
|
| Posted: Mon Jul 20, 2009 5:59 pm Post subject: |
|
|
| myceliv wrote: | | Not sure if there's a better way, but yes, that's what I just ended up doing. (fetch, unmerge, merge new). |
I used quickpkg to save e2fsprogs, e2fsprogs-libs, and util-linux and fetched and unmerged. I could then emerge util-linux-2.16 but not the other two so I re-emerged the binary, saved, copies of e2fsprogs, e2fsprogs-libs, and util-linux. I seem to be in dependency hell. Here's my current 'emerge -uDp world' problem immediately following a sync:
| Code: | [blocks B ] <sys-fs/e2fsprogs-1.41.8 ("<sys-fs/e2fsprogs-1.41.8" is blocking sys-apps/util-linux-2.16)
[blocks B ] <sys-libs/e2fsprogs-libs-1.41.8 ("<sys-libs/e2fsprogs-libs-1.41.8" is blocking sys-apps/util-linux-2.16)
* Error: The above package list contains packages which cannot be
* installed at the same time on the same system.
('installed', '/', 'sys-libs/e2fsprogs-libs-1.41.3-r1', 'nomerge') pulled in by
>=sys-libs/e2fsprogs-libs-1.41 required by ('installed', '/', 'sys-fs/cryptsetup-1.0.6-r2', 'nomerge')
sys-libs/e2fsprogs-libs required by world
sys-libs/e2fsprogs-libs required by ('installed', '/', 'x11-libs/libSM-1.1.0', 'nomerge')
(and 1 more)
('ebuild', '/', 'sys-apps/util-linux-2.16', 'merge') pulled in by
sys-apps/util-linux required by world
>=sys-apps/util-linux-2.13 required by ('ebuild', '/', 'sys-power/pm-utils-1.2.5', 'merge')
>=sys-apps/util-linux-2.13 required by ('installed', '/', 'sys-apps/hal-0.5.11-r9', 'nomerge')
(and 1 more)
('installed', '/', 'sys-fs/e2fsprogs-1.41.3-r1', 'nomerge') pulled in by
sys-fs/e2fsprogs required by world
|
I would be grateful for any pointers. |
|
| Back to top |
|
|
McNerl
n00b
Joined: 19 Oct 2007
Posts: 17
Location: Magdeburg, Germany
|
| Posted: Tue Jul 21, 2009 2:11 pm Post subject: |
|
|
I run:
| Code: | | emerge --unmerge e2fsprogs e2fsprogs-libs util-linux |
I know this will break my system, but i removed this packages anyway. And indeed my system was broken!
With a LiveCD I try to remerge e2fsprogs and Co but I get still the blocking error.
I recognize that I didn't unmask e2fsprogs-1.41.8 and e2fsprogs-libs-1.41.8. After I change that, i was able to install e2fsprogs-libs. util-linux failed with the "loop-aes" flag (can not apply the patch). I disabled it for util-linux. Finally i could install util-linux and e2fsprogs. Currently I'm back in my system and it works fine.
_________________
| Wernher von Braun wrote: | | Science does not have a moral dimension. It is like a knife. If you give it to a surgeon or a murderer, each will use it differently. |
|
|
| Back to top |
|
|
sgarcia
Apprentice
Joined: 21 May 2003
Posts: 226
Location: Bakersfield, CA
|
| Posted: Tue Jul 21, 2009 2:28 pm Post subject: |
|
|
Note that order matters.
When I tried to cut and paste some of the commands given in this thread, they all failed because libuuid was missing. (I had already unmerged e2fsprogs e2fsprogs-libs and util-linux )
To get them to successfully emerge again, I had to do this:
| Code: | emerge util-linux e2fsprogs
|
You don't have to specify e2fsprogs-libs, it gets pulled in by e2fsprogs.
Again, order matters. util-linux needs to be first.
_________________
Ignorance killed the cat. Curiosity was framed. |
|
| Back to top |
|
|
cfgauss
Apprentice
Joined: 18 May 2005
Posts: 265
Location: USA
|
| Posted: Tue Jul 21, 2009 2:44 pm Post subject: |
|
|
| McNerl wrote: |
I recognize that I didn't unmask e2fsprogs-1.41.8 and e2fsprogs-libs-1.41.8. |
Thanks. That works. Here's what I did.
1. Unmasked e2fsprogs and e2fsprogs-libs in /etc/portage/package.keywords. (I think I only needed e2fsprogs, however.)
2. Emerged e2fsprogs which brought in util-linux-2.16 as a dependency
Then 'emerge world' worked. |
|
| Back to top |
|
|
albright
Veteran
Joined: 16 Nov 2003
Posts: 1763
Location: Near Toronto
|
| Posted: Wed Jul 22, 2009 11:28 am Post subject: |
|
|
When I try to emerge util-linux I get this error:
| Code: | * Applying util-linux-ng-2.15-20090511.diff ...
* Failed Patch: util-linux-ng-2.15-20090511.diff !
* ( /var/tmp/portage/sys-apps/util-linux-2.16/work/util-linux-ng-2.15-20090511.diff )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-apps/util-linux-2.16/temp/util-linux-ng-2.15-20090511.diff-19826.out |
/var/tmp/portage/sys-apps/util-linux-2.16/temp/util-linux-ng-2.15-20090511.diff-19826.out
begins with this (I can post more if necessary):
| Code: | missing header for unified diff at line 13 of patch
can't find file to patch at input line 13
Perhaps you used the wrong -p or --strip option? |
 real nice screwed up system now
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
| Back to top |
|
|
Nerevar
l33t
Joined: 31 May 2008
Posts: 710
|
| Posted: Wed Jul 22, 2009 11:46 am Post subject: |
|
|
| albright wrote: | When I try to emerge util-linux I get this error:
| Code: | * Applying util-linux-ng-2.15-20090511.diff ...
* Failed Patch: util-linux-ng-2.15-20090511.diff !
* ( /var/tmp/portage/sys-apps/util-linux-2.16/work/util-linux-ng-2.15-20090511.diff )
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sys-apps/util-linux-2.16/temp/util-linux-ng-2.15-20090511.diff-19826.out |
|
You most likely have the loop-aes USE flag. You'll have to wait to install 2.16 until a patch is made for loop-aes support.
http://loop-aes.sourceforge.net/updates/ |
|
| Back to top |
|
|
albright
Veteran
Joined: 16 Nov 2003
Posts: 1763
Location: Near Toronto
|
| Posted: Wed Jul 22, 2009 1:13 pm Post subject: |
|
|
| Quote: | | You most likely have the loop-aes USE flag |
Thanks Nerevar, that was it. Disabling loop-aes appears to
have worked ... (util-linux was the only package that had
that use flag and I have no idea how it got into my make.conf)
_________________
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
| Back to top |
|
|
upengan78
l33t
Joined: 27 Jun 2007
Posts: 607
Location: IL
|
| Posted: Thu Jul 23, 2009 2:21 pm Post subject: |
|
|
| sgarcia wrote: | Note that order matters.
When I tried to cut and paste some of the commands given in this thread, they all failed because libuuid was missing. (I had already unmerged e2fsprogs e2fsprogs-libs and util-linux )
To get them to successfully emerge again, I had to do this:
| Code: | emerge util-linux e2fsprogs
|
You don't have to specify e2fsprogs-libs, it gets pulled in by e2fsprogs.
Again, order matters. util-linux needs to be first. |
Thank you very much, your post is really useful. Thanks to OP as well.
_________________
Life is a ride
Optiplex745 3.0.3-gentoo#1 SMP PREEMPT Tue May 31 13:19:24 CDT 2011 x86_64 IntelCore2 CPU 6400@ 2.13GHz
Optiplex755 2.6.34-gentoo-r6 x86_64 #1 SMP Wed Sep 22 17:17:13 CDT 2010 x86_64 IntelCore2 Duo CPU E6550 2.33GHz |
|
| Back to top |
|
|
Punchcutter
Apprentice
Joined: 11 Feb 2007
Posts: 171
|
| Posted: Mon Aug 10, 2009 6:58 pm Post subject: |
|
|
FWIW, I'm not sure why, but all I had to do was
(without unmerging anything first). And it fixed my blocks. Weird.
Dave |
|
| Back to top |
|
|
bloedie
Tux's lil' helper
Joined: 03 Jul 2006
Posts: 87
Location: Germany
|
| Posted: Tue Aug 11, 2009 7:33 am Post subject: |
|
|
Hi.
The only thing I had to do was using the stable sys-fs/udev version.
So I took it off my package.keywords and everything went fine for
me.
Cu.
Bloedie |
|
| Back to top |
|
|
jah2
n00b
Joined: 17 Nov 2004
Posts: 47
Location: NC
|
| Posted: Thu Aug 20, 2009 4:59 pm Post subject: |
|
|
| McNerl wrote: | I run:
| Code: | | emerge --unmerge e2fsprogs e2fsprogs-libs util-linux |
I know this will break my system, but i removed this packages anyway. And indeed my system was broken! |
Here's what I did:
To be safe -
quickpkg e2fsprogs
quickpkg e2fsprogs-libs
quickpkg util-linux
emerge -NuDav --fetchonly util-linux e2fsprogs e2fsprogs-libs
Then -
emerge -C e2fsprogs e2fsprogs-libs && emerge -NuDv --nodeps util-linux e2fsprogs-libs e2fsprogs
Seems to have worked, no issues as far as I know. I wish I could profess to some special insight or knowledge but I just duplicated what I did on another system for the "e2fsprogs, com_err, and ss blockers" as documented in a sticky post in this forum. |
|
| Back to top |
|
|
Darkshine
n00b
Joined: 06 Nov 2007
Posts: 46
Location: Kiev, Micronesia
|
| Posted: Thu Sep 10, 2009 10:53 am Post subject: |
|
|
| I had the same problem. I de-installed and installed back some packages as jah2 mentioned and all is ok now |
|
| Back to top |
|
|
Mgiese
Veteran
Joined: 23 Mar 2005
Posts: 1238
Location: indiana
|
| Posted: Fri Oct 02, 2009 9:17 am Post subject: |
|
|
| cfgauss wrote: | | McNerl wrote: |
I recognize that I didn't unmask e2fsprogs-1.41.8 and e2fsprogs-libs-1.41.8. |
Thanks. That works. Here's what I did.
1. Unmasked e2fsprogs and e2fsprogs-libs in /etc/portage/package.keywords. (I think I only needed e2fsprogs, however.)
2. Emerged e2fsprogs which brought in util-linux-2.16 as a dependency
Then 'emerge world' worked. |
hey thanks that worked for me !!
_________________
I do not have a Superman complex, for I am God not Superman  |
|
| Back to top |
|
|
The Mountain Man
l33t
Joined: 03 Sep 2003
Posts: 643
|
| Posted: Sat Oct 31, 2009 12:39 pm Post subject: |
|
|
| jah2 wrote: | | McNerl wrote: | I run:
| Code: | | emerge --unmerge e2fsprogs e2fsprogs-libs util-linux |
I know this will break my system, but i removed this packages anyway. And indeed my system was broken! |
Here's what I did:
To be safe -
quickpkg e2fsprogs
quickpkg e2fsprogs-libs
quickpkg util-linux
emerge -NuDav --fetchonly util-linux e2fsprogs e2fsprogs-libs
Then -
emerge -C e2fsprogs e2fsprogs-libs && emerge -NuDv --nodeps util-linux e2fsprogs-libs e2fsprogs
Seems to have worked, no issues as far as I know. I wish I could profess to some special insight or knowledge but I just duplicated what I did on another system for the "e2fsprogs, com_err, and ss blockers" as documented in a sticky post in this forum. |
I followed these instructions to the letter and got the following error:
| Code: | >>> Installing (2 of 3) sys-libs/e2fsprogs-libs-1.41.3-r1
* checking 52 files for package collisions
* This package will overwrite one or more files that may belong to other
* packages (see list below). You can use a command such as `portageq
* owners / <filename>` to identify the installed package that owns a
* file. If portageq reports that only one package owns a file then do
* NOT file a bug report. A bug report is only useful if it identifies at
* least two or more packages that are known to install the same file(s).
* If a collision occurs and you can not explain where the file came from
* then you should simply ignore the collision since there is not enough
* information to determine if a real problem exists. Please do NOT file
* a bug report at http://bugs.gentoo.org unless you report exactly which
* two packages install the same file(s). Once again, please do NOT file
* a bug report unless you have completely understood the above message.
*
* Detected file collision(s):
*
* /usr/lib/libblkid.so
* /usr/lib/libuuid.a
* /usr/lib/libuuid.so
* /usr/lib/libblkid.a
* /usr/lib/pkgconfig/blkid.pc
* /usr/lib/pkgconfig/uuid.pc
* /usr/share/man/man3/uuid_is_null.3.bz2
* /usr/share/man/man3/uuid_clear.3.bz2
* /usr/share/man/man3/uuid_generate_time.3.bz2
* /usr/share/man/man3/uuid_parse.3.bz2
* /usr/share/man/man3/uuid.3.bz2
* /usr/share/man/man3/uuid_unparse.3.bz2
* /usr/share/man/man3/uuid_generate_random.3.bz2
* /usr/share/man/man3/uuid_generate.3.bz2
* /usr/share/man/man3/uuid_compare.3.bz2
* /usr/share/man/man3/uuid_copy.3.bz2
* /usr/share/man/man3/libblkid.3.bz2
* /usr/share/man/man3/uuid_time.3.bz2
* /usr/include/uuid/uuid.h
* /usr/include/blkid/blkid.h
* /lib/libblkid.so.1
* /lib/libuuid.so.1
*
* Searching all installed packages for file collisions...
*
* Press Ctrl-C to Stop
*
* sys-apps/util-linux-2.16.1
* /lib/libblkid.so.1
* /lib/libuuid.so.1
* /usr/include/blkid/blkid.h
* /usr/include/uuid/uuid.h
* /usr/lib/libblkid.a
* /usr/lib/libblkid.so
* /usr/lib/libuuid.a
* /usr/lib/libuuid.so
* /usr/lib/pkgconfig/blkid.pc
* /usr/lib/pkgconfig/uuid.pc
* /usr/share/man/man3/libblkid.3.bz2
* /usr/share/man/man3/uuid.3.bz2
* /usr/share/man/man3/uuid_clear.3.bz2
* /usr/share/man/man3/uuid_compare.3.bz2
* /usr/share/man/man3/uuid_copy.3.bz2
* /usr/share/man/man3/uuid_generate.3.bz2
* /usr/share/man/man3/uuid_generate_random.3.bz2
* /usr/share/man/man3/uuid_generate_time.3.bz2
* /usr/share/man/man3/uuid_is_null.3.bz2
* /usr/share/man/man3/uuid_parse.3.bz2
* /usr/share/man/man3/uuid_time.3.bz2
* /usr/share/man/man3/uuid_unparse.3.bz2
*
* Package 'sys-libs/e2fsprogs-libs-1.41.3-r1' NOT merged due to file
* collisions. If necessary, refer to your elog messages for the whole
* content of the above message.
>>> Failed to install sys-libs/e2fsprogs-libs-1.41.3-r1, Log file:
>>> '/var/tmp/portage/sys-libs/e2fsprogs-libs-1.41.3-r1/temp/build.log' |
Now what? 
_________________
I suck at signatures. |
|
| Back to top |
|
|
VoidMage
Advocate
Joined: 14 Oct 2006
Posts: 4058
|
| Posted: Sat Oct 31, 2009 5:20 pm Post subject: |
|
|
| The Mountain Man wrote: | | I followed these instructions to the letter |
...and that was your mistake.
What would probably work, was:
'emerge -uDp util-linux e2fsprogs'.
That way, old e2fsprobgs-libs would be uninstalled before
installing the new version - due to certain changes, that required in this case.
Try unmerging sys-libs/e2fsprogs-libs and reemerging them immediately afterwards
(with '-1', of course), just make sure none of the files belonging now to util-linux gets unmerged.
And just why does it emerge 1.41.3 instead of 1.41.8 ? |
|
| Back to top |
|
|
|
Portage & Programming
