Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
SCSI help, odd problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
divine
n00b
n00b


Joined: 18 Apr 2002
Posts: 16
Location: Groton, CT

PostPosted: Tue Apr 30, 2002 9:11 pm    Post subject: SCSI help, odd problem Reply with quote

Hello everyone!
I think I have my problem narrowed down to one issue...

Code:
~ $ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: PIONEER  Model: DVD-ROM DVD-305  Rev: 1.00
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: MATSHITA Model: CD-RW  CW-7586   Rev: 1.08
  Type:   CD-ROM                           ANSI SCSI revision: 02


Now.... both devices are seen at the same address ( I believe), which is not cool =)
The CD-RW is a scsi-emulated device, and the DVD drive is a genuine scsi device.

Does anyone have any idea on how to change the addresses on these devices from a kernel parameter? Thanks in advance for your help!
_________________
=)
Back to top
View user's profile Send private message
arkane
l33t
l33t


Joined: 30 Apr 2002
Posts: 918
Location: Phoenix, AZ

PostPosted: Tue Apr 30, 2002 9:19 pm    Post subject: Reply with quote

Just by the off chance, do you have the kernel parameter hd=ide-scsi in the grub menus.lst?

Just wondering... other than that, I'm out of ideas. I've never ran into that!
Back to top
View user's profile Send private message
divine
n00b
n00b


Joined: 18 Apr 2002
Posts: 16
Location: Groton, CT

PostPosted: Tue Apr 30, 2002 9:21 pm    Post subject: Reply with quote

I USED to have it like this.....

Code:
kernel /boot/bzImage root=/dev/hda1 hdc=ide-scsi



I am going to change it again, reboot and see if anything happens.
_________________
=)
Back to top
View user's profile Send private message
divine
n00b
n00b


Joined: 18 Apr 2002
Posts: 16
Location: Groton, CT

PostPosted: Tue Apr 30, 2002 9:36 pm    Post subject: Reply with quote

after a reboot and the new kernel param, I have the same problem

Code:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: PIONEER  Model: DVD-ROM DVD-305  Rev: 1.00
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: MATSHITA Model: CD-RW  CW-7586   Rev: 1.08
  Type:   CD-ROM                           ANSI SCSI revision: 02


any other suggestions?
_________________
=)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum