View previous topic :: View next topic |
Author |
Message |
uxbod Guru
Joined: 30 Dec 2002 Posts: 474 Location: UK
|
Posted: Mon Aug 20, 2007 9:46 am Post subject: [SOLVED] Intel IWL4965 Problem |
|
|
Hi,
Just cannot seem to get my wireless card to work I have enabled the new mac80211 in the kernel as I am running :-
Code: | cyborg linux # uname -a
Linux cyborg 2.6.22-gentoo-r4 #4 SMP Mon Aug 20 09:56:12 GMT 2007 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux |
But when the modules loads I get the following in dmesg and no device is created :-
Code: | iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.0.0-1d
iwl4965: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Channel 14 [2.4GHz] is Tx only -- skipping.
iwl4965: Channel 183 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 184 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 185 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 187 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 188 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 189 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 192 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 196 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 7 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 8 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 11 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 12 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 16 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 34 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 38 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 42 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 46 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 145 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 149 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 153 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 157 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 161 [5.2GHz] is Tx only -- skipping.
iwl4965: Channel 165 [5.2GHz] is Tx only -- skipping.
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-4965-rs'
wmaster0: Failed to initialize wep
iwl4965: Failed to register network device (error -12) |
Any ideas ?
Last edited by uxbod on Mon Aug 27, 2007 9:09 am; edited 1 time in total |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Wed Aug 22, 2007 4:33 pm Post subject: |
|
|
Can you post emerge --info, and also can you post your installation method to install your wireless plz |
|
Back to top |
|
|
kekccc n00b
Joined: 06 Aug 2007 Posts: 2
|
Posted: Fri Aug 24, 2007 1:58 pm Post subject: |
|
|
I have the same problem on my Asus G1S
The problem was that the driver iwl4965 does not load kernel modules which it needs.
Try
rmmod iwl4965
modprobe blkcipher aes arc4 ecb cryptomgr crypto_algapi iwl4965
This work for me. Final solution was to add blkcipher aes arc4 ecb cryptomgr crypto_algapi iwl4965 at /etc/modules.autoload.d/kernel-2.6 and now it works.
Hope this will help
Regards |
|
Back to top |
|
|
uxbod Guru
Joined: 30 Dec 2002 Posts: 474 Location: UK
|
Posted: Sun Aug 26, 2007 8:55 am Post subject: |
|
|
Awesome that did it I did load a few crypto modules but one of them was the magic one Do you know how to stop UDEV from loading iwl4965 as it is being loaded before modules.autoload.d kicks in ? I know it can be hashed from the persistent udev net rules, but was unsure if there is a proper method of doing this ? |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Sun Aug 26, 2007 1:09 pm Post subject: |
|
|
Code: |
# nano -w /etc/modprobe.d/blacklist
blacklist iwl4965
|
This command will block iwl4965 from being started by udev |
|
Back to top |
|
|
uxbod Guru
Joined: 30 Dec 2002 Posts: 474 Location: UK
|
Posted: Mon Aug 27, 2007 9:09 am Post subject: |
|
|
Awesome. Thank you all for your help it is very appreciated. |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Mon Aug 27, 2007 4:14 pm Post subject: |
|
|
No problem |
|
Back to top |
|
|
GaMeS Guru
Joined: 08 Nov 2005 Posts: 374 Location: Nantes
|
Posted: Sun Sep 02, 2007 10:58 pm Post subject: |
|
|
Thank's for yours post ! this is help me for a Thinkpad T61P _________________ $this->setLife(FALSE);
printf "I'm not a gamer !";
|
|
Back to top |
|
|
at Apprentice
Joined: 20 Aug 2006 Posts: 185
|
Posted: Tue Feb 12, 2008 5:31 pm Post subject: |
|
|
Hm-m. I followed the described procedure on T61 and it seems to be working with WPA only with wpa_supplicant - which means that all the listed modules are irrelevant.
Can you really make iwl4965 and the in-kernel encryption work without wpa_supplicant?
Would it be too much to ask to post:
and /etc/conf.d/wireless?
Thank you! |
|
Back to top |
|
|
d2_racing Bodhisattva
Joined: 25 Apr 2005 Posts: 13047 Location: Ste-Foy,Canada
|
Posted: Wed Feb 13, 2008 12:44 pm Post subject: |
|
|
For the record, I use only a WEP key, so I can't help you with the /etc/conf.d/wireless |
|
Back to top |
|
|
|