View previous topic :: View next topic |
Author |
Message |
fo_o n00b
Joined: 05 Jun 2007 Posts: 47 Location: bourg-en-bresse
|
Posted: Fri Oct 05, 2007 8:18 pm Post subject: [conky] vos .conkyrc |
|
|
Conky, le gadget par excellence
Je propose de partager nos cher .conkyrc, ainsi qu'un petit screenshot
(Je poste dans la section Documentations, Astuces et Scripts car je pense que ça pourra servir à d'autres)
Homepage de conky: http://conky.sourceforge.net/
Mon .conkyrc:
Code: |
kground no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
use_xft yes
xftfont Monospace:pixelsize=10
own_window_transparent no
xftalpha 0.8
update_interval 1
own_window no
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
stippled_borders 10
border_margin 4
border_width 1
default_color gray
default_shade_color white
default_outline_color white
gap_x 3
gap_y 40
alignment top_left
use_spacer no
no_buffers yes
uppercase no
# Colors:
color1 red
color2 97C12C
color3 green
color4 white
TEXT
$color4}[$nodename ~ $sysname $kernel]$color
${color4}Architecture$color : ${color2}$machine$color
${color4}Load$color : ${color2}$loadavg$color
${color4}Uptime$color : ${color2}$uptime$color
${color4}Processor$color
|
`- ${color4}Model$color : ${exec uname -p|cut -d\ -f1-2}
`- ${color4}Speed$color : $freq_g Ghz
`- ${color4}Core1$color : ${color }${cpugraph cpu1 8,80} ${cpu cpu1 }%
`- ${color4}Core2$color : ${color }${cpugraph cpu2 8,80} ${cpu cpu2 }%
`- ${color4}Temp$color : Core1 ${color1}${exec sensors | grep -A 2 '^coretemp-isa-0000' | cut -c15-18 | grep '°'}$color Core2 ${color1}${exec sensors | grep -A 2 '^coretemp-isa-0001' | cut -c15-18 | grep '°'}$color
${color4}Memory$color
|
`- ${color4}Size$color : $memmax
`- ${color4}Used$color : ${membar 8,80} $mem ($memperc %)
${color4}Disk$color
|
`- ${color4}/$color : ${fs_bar 8,80 /} Size: ${fs_size /} Free: ${fs_free /}
`- ${color4}/home$color : ${fs_bar 8,80 /home} Size: ${fs_size /home} Free: ${fs_free /home}
`- ${color4}Swap$color : ${swapbar 8,80} Size: $swapmax Used: $swap
`- ${color4}Temp$color : ${color1}${hddtemp /dev/hda}$color
${color4}Processes$color
|
`- ${color4}Amount$color : $processes
`- ${color4}Running$color : $running_processes
${color4}Network$color
|
`- ${color4}Down$color : ${downspeedgraph eth0 8,80} ${downspeed eth0} k/s Total: ${totaldown eth0}
`- ${color4}Up$color : ${upspeedgraph eth0 8,80} ${upspeed eth0} k/s Total: ${totalup eth0}
${color4}Audacious$color
|
`- ${color4}Status$color : $audacious_status
`- ${color4}Title$color : $audacious_title
`- ${color4}Length$color : $audacious_length
`- ${color4}Progress$color : ${audacious_bar 8,80}
|
Screenshot: http://foohey.net/assets/2007/10/5/conky.png
m'ci à geekounet pour le modèle du proc _________________ # emerge beer chips life
Calculating dependencies \
emerge: there are no ebuilds to satisfy "life". |
|
Back to top |
|
|
CryoGen Veteran
Joined: 11 Feb 2004 Posts: 1426 Location: Bamako - Mali - Afrique
|
Posted: Fri Oct 12, 2007 10:28 am Post subject: |
|
|
Voila mon mien:
Code: | # Conky configuration
background no
use_xft yes
xftfont Fixed:size=7
xftalpha 1.0
out_to_console no
update_interval 2
total_run_times 0
own_window yes
own_window_type normal
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 310 10
maximum_width 310
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
stippled_borders 5
border_margin 4
border_width 1
default_color 004eff
default_shade_color black
default_outline_color black
alignment bottom_left
gap_x 5
gap_y 5
no_buffers no
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale yes
use_spacer no
TEXT
${color}${hr 2}
${color ffa000}$alignc$sysname $kernel ($machine) ${color 00aae9}on ${color ffa000}$nodename
$color${hr 1}
${color}Date: ${color ffa000}${time %A %d %B} ${alignr}${color}Uptime: ${color orange}$uptime
$color${hr 2}
${color}System :
${color} Load: ${color ffa000}$loadavg
${color} CPU: ${color ffa000}${cpu cpu1}% ${color 00aae9}${cpubar cpu1}
$alignc${color 00aae9}${cpugraph 0 32, 300 00905f 003d54}
${color} RAM: ${color ffa000}$memperc% $mem/$memmax ${color 00aae9}$membar
${color} -> Buffered: ${color ffa000}$buffers ${color}Cached: ${color ffa000}$cached
${color} Swap: ${color ffa000}$swapperc% $swap/$swapmax ${color 00aae9}${swapbar}
$color${hr 1}
${color}Disk I/O: ${color ffa000}$diskio
${color}File systems :
${color} Gentoo${color ffa000} ${fs_used_perc /}% ${fs_used /}/${fs_size /} ${color 00aae9}${fs_bar /}
${color} Winux ${color ffa000} ${fs_used_perc /mnt/winux/}% ${fs_used /mnt/winux/}/${fs_size /mnt/winux/} ${color 00aae9}${fs_bar /mnt/winux/}
${if_mounted /mnt/p2p}${color} p2p ${color ffa000} ${fs_used_perc /mnt/p2p/}% ${fs_used /mnt/p2p/}/${fs_size /mnt/p2p/} ${color 00aae9}${fs_bar /mnt/p2p/}
$endif
$color${hr 1}
${color}Process:
${color} ->Total: ${color ffa000}$processes ${color}->Running: ${color ffa000}$running_processes
${color} Top3 cpu:
${color 00aae9} Name PID CPU% MEM%
${color ffa000} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color ffa000} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color ffa000} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color} Top3 mem:
${color 00aae9} Name PID CPU% MEM%
${color ffa000} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color ffa000} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color ffa000} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
$color${hr 1}
${color}Network:
${color 00aae9}$alignc${downspeedgraph eth0 32,120 00905f 003d54} ${upspeedgraph eth0 32,120 00905f 003d54}
${color} Download speed: ${color ffa000}${downspeedf eth0}$color KB/s ${alignr}Upload speed: ${color ffa000}${upspeedf eth0}$color KB/s
$color${hr 2}
${color}Paludis:
${color} Last Sync: ${color ffa000}${execi 300 ~/.conky/portage lastsync}
${color} Last Paludis: ${color ffa000}${execi 10 ~/.conky/portage lastemerge}
${color} -> Overlay: ${color ffa000}${execi 10 ~/.conky/portage lastemergeover}
${color} Current Paludis: ${color ffa000}${execi 10 ~/.conky/portage currentemerge}
${color} -> Elapsed Time: ${color ffa000}${execi 10 ~/.conky/portage currentemergeElapsed}
${color}${hr 2}
${color}Horus pppd:
${color} Status: ${color ffa000}${execi 10 ~/.conky/horuslog cnx}
${color} IP: ${color ffa000}${execi 10 ~/.conky/horuslog ip}
${color} Derniere deco: ${color ffa000}${execi 10 ~/.conky/horuslog date}
${color} ->duree: ${color ffa000}${execi 10 ~/.conky/horuslog ct}
${color}${hr 2} |
Et le script portage que j'ai fais (adapté pour paludis)
Code: | #!/bin/bash
case "$1" in
#lastsync
lastsync)
TMP=`qlop -C --sync | tail -n 1`
POS=2
MOIS=`echo $TMP | cut -f $POS -d " "`
POS=3
JOUR=`echo $TMP | cut -f $POS -d " "`
POS=4
if [ "$JOUR" -eq " " ]; then
JOUR=`echo $TMP | cut -f $POS -d " "`
POS=5
fi
HEURE=`echo $TMP | cut -f $POS -d " "`
echo "$JOUR/$MOIS $HEURE"
;;
#lastemerge
lastemerge)
TMP=`qlop -Cl | tail -n 1`
JOUR=`echo $TMP | cut -f 3 -d " "`
POS=7
if [ "$JOUR" == " " ]; then
POS=8
fi
RESULT=`echo $TMP | cut -f $POS -d " " | cut -f 1 -d ":"`
echo "$RESULT"
;;
lastemergeover)
TMP=`qlop -Cl | tail -n 1`
JOUR=`echo $TMP | cut -f 3 -d " "`
POS=7
if [ "$JOUR" == " " ]; then
POS=8
fi
RESULT=`echo $TMP | cut -f $POS -d " "`
RESULT=`echo $RESULT | cut -f 3 -d ":"`
echo $RESULT
;;
currentemerge)
TMP=`qlop -Cc | grep '*' | cut -f 3 -d " "`
if [ "$TMP" == "" ];then
RESULT="nothing now"
else
RESULT=$TMP
fi
echo "$RESULT"
;;
currentemergeElapsed)
TMP=`qlop -Cc | grep "elapsed" | cut -f 2- -d ":"`
if [ "$TMP" == "" ];then
TMP="no emerge in progress"
fi
echo "$TMP"
;;
distcc)
TMP=`qlop -Cc`
if [ "$TMP" == "" ];then
echo "nothing to distcc ;-)"
echo "" #spacer
echo ""
echo ""
else
DISTCC_DIR="/var/tmp/portage/.distcc/" distccmon-text > .conky-distcc
cat .conky-distcc
fi
;;
estimated)
TMP=`qlop -Cc | grep '*' | cut -f 3 -d " "`
if [ "$TMP" == "" ];then
RESULT=""
else
RESULT=$TMP
fi
if [ "$RESULT" == "" ];then
#bah rien
echo ""
else
TMP=`echo $RESULT | cut -f 1 -d "-"`
RESULT=`qlop -tH $TMP`
echo $RESULT
fi
;;
esac |
Bon c'est moche comme script mais il marche XD _________________ - CryoGen` on #gentoofr@irc.freenode.net
- ~amd64 / KDE4
- I'm the bone of my sword... |
|
Back to top |
|
|
kwenspc Advocate
Joined: 21 Sep 2003 Posts: 4954
|
Posted: Fri Oct 12, 2007 1:17 pm Post subject: |
|
|
@CryoGen: un ptit screenshoot? _________________ membre officieux du SAV Ati GEntoo |
|
Back to top |
|
|
Temet Advocate
Joined: 14 Mar 2006 Posts: 2586 Location: 92
|
Posted: Fri Oct 12, 2007 4:06 pm Post subject: |
|
|
Oui c'est un mytho, dans le screenshot de sa signature il n'utilise pas conky! _________________ Full Gentoo powered. |
|
Back to top |
|
|
truc Advocate
Joined: 25 Jul 2005 Posts: 3199
|
Posted: Sun Oct 14, 2007 8:42 am Post subject: |
|
|
@CryoGen
salut, j'n'ai pas décomposé ton script, mais je vois juste des petits trucs à améliorer (je sais que tu as dit que c'était crade hein? ).
Tu utilises plusieurs fois qlop -Cl | tai -n 1, et J'm dit que tu pourrais peut-être stocker cette ligne dans une variable un peu plus globale pour éviter de le faire deux fois.
Ensuite, les ` (backtick) de bash sont 'déconseillés' depuis maintenant un bon moment, il faut privilégier l'utilisation de $( )
Pour le lastsync) et la manipulation de la date, tu peux faire ce genre de chose en te galérant bien moins avec 'date' (enfin je crois que c'est plus simple hein )
Sinon, pour le estimated), puisque tu parles de paludis, j'imagine que tu utilises le portage-utils avec les supers patches pour les overlays&paludis, si c'est le cas, je pense que tu as peut-être loupé quelques nouvelles features :
Du style, dans la sortie de qlop --current -vv, tu vas avoir:
le temps passé,
le temps moyen pour le packet en cours,
et même (si tu as bien mis deux niveaux de verbosité):
la liste des packages restant,
ainsi que le temps estimé pour finir l'installation de tout ces packages.
J'dis ça car ça peut t'éviter de refaire encore appel à qlop pour des informations que tu as déjà.
(Si j'ai l'air d'être radin en process, c'est juste dans le principe hein? conky se raffraichi super souvent, donc autant essayer de lui mener la vie moins dure..
je tinvite biensûr à essayer, mais pour info: | qlop --current -vv
* x11-misc/beryl-settings-bindings-0.2.1.ebuild::gentoo
started: Fri Apr 13 13:31:37 2007
elapsed: 24 seconds avg build time: 36 seconds
* x11-misc/beryl-settings-bindings-0.2.1::gentoo
* x11-misc/beryl-settings-0.2.1::gentoo
* x11-apps/xlsclients-1.0.1::gentoo
* x11-apps/xvinfo-1.0.1::gentoo
* x11-misc/beryl-manager-0.2.1::gentoo
* x11-wm/beryl-0.2.1::gentoo
estimated time left: 1 minute, 19 seconds (6 packages) |
_________________ The End of the Internet! |
|
Back to top |
|
|
Ezka Guru
Joined: 17 Feb 2005 Posts: 352 Location: par là, mais vraiment ...
|
Posted: Sun Oct 14, 2007 1:07 pm Post subject: |
|
|
Ha bah mon conkyrc :
Code: | # maintain spacing between certain elements
use_spacer no
# set to yes if you want tormo to be forked in the background
background no
use_xft yes
# Xft font when Xft is enabled
xftfont anorexia:pixelsize=8
# Text alpha when using Xft
xftalpha 1
# Update interval in seconds
update_interval 4.0
# Create own window instead of using desktop (required in nautilus)
#own_window yes
#own_window_type override
#own_window_transparent yes
own_window yes
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_type normal
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
minimum_size 200 150
maximum_width 200
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no # amplifies text
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_margin 9
# border width
border_width 1
# Default colors and also border colors, grey90 == #e5e5e5
default_color grey90
default_shade_color black
default_outline_color DarkGrey
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 14
gap_y 35
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
#
# stuff after 'TEXT' will be formatted on screen
TEXT
${color #ffcb48}$nodename$color ${color #828282}$sysname $kernel sur $machine$color
${color #ffcb48}HEAT
${color #98c2c7}hdd: One${color #c4c4c4} ${execi 12 sudo hddtemp -n /dev/sda}${color #98c2c7}C - Two${color #c4c4c4} ${execi 12 sudo hddtemp -n /dev/sdb}${color #98c2c7}C - Three${color #c4c4c4} ${execi 12 sudo hddtemp -n /dev/sdd}${color #98c2c7}C
${color #ffcb48}PROCESSING$color
${color #98c2c7}CPU:$color $cpu% $freq_dyn ${color #98c2c7}Mhz$color
${color #286C81}${cpubar}
${color #286C81}${cpugraph 286C81 a3a3a3}
${color #98c2c7}NAME PID CPU% MEM%
${color #e5e5e5}${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color #c4c4c4}${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color #a3a3a3}${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color #828282}${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color #ffcb48}DATA$color
${color #98c2c7}RAM:$color $memperc% ${color #286C81}${membar 6}${color}
$mem/$memmax
${color #98c2c7}NAME PID CPU% MEM%
${color #e5e5e5}${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color #c4c4c4}${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color #a3a3a3}${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color #828282}${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color #98c2c7}Swap:$color $swapperc% ${color #286C81}${swapbar 6}$color
${color #98c2c7}free on /:$color ${fs_free_perc /}% $fs_free ${color #286C81}${fs_bar 6 /}$color
${color #98c2c7}Upload: $color${upspeed eth0}kb/s ${color #98c2c7}Wifi : $color${upspeed ath0}kb/s
${color #98c2c7}Download: $color${downspeed eth0}kb/s $color${downspeed ath0}kb/s
${color #ffcb48}EMERGE$color
${color #98c2c7}Last:$color ${execi 40 /home/ezka/.bin/emerge-current.sh}
${color #98c2c7}Progress:$color ${execi 40 /home/ezka/.bin/emerge-progress.sh} |
Bon pour emerge j'utilise des srcipts un peu fait a l'arrache qui ne sont pas trés interessant (et surtout bien vieux) :
pour emerge-current.sh :
Code: | #!/bin/bash
tac /var/log/emerge.log |\
grep 'Compiling' |\
head |\
sed -e 's/.*(//' |\
sed -e 's/::.*)//' |\
head -n 1 |\
cut -d \) -f 1 |
emerge-progress.sh
Code: | #!/bin/bash
tail -n 50 /var/log/emerge.log |\
tac |\
grep -v "Starting retry" |\
grep -iE '([0-9]* of [0-9]*)' -o -m 1 |\
sed -e 's/\(.*\) of \(.*\)/\1 \2/' |\
awk '{print 100.0*$1/$2}' |
si vous avez mieux je suis preneur, pas vraiment l'envie d'en faire
une chtite image par là : http://img463.imageshack.us/img463/958/screenshot1zk9.png _________________ Ez. |
|
Back to top |
|
|
Pwwwet n00b
Joined: 16 Oct 2007 Posts: 1 Location: /usr/src
|
Posted: Tue Oct 16, 2007 9:29 am Post subject: |
|
|
fo_o : C'est quoi ton thème xfce stp ? _________________ Sauvez un Kernel, mangez un Geek. Sauvez un lapin, mangez un chasseur. Sauvez un arbre, mangez un castor. |
|
Back to top |
|
|
CryoGen Veteran
Joined: 11 Feb 2004 Posts: 1426 Location: Bamako - Mali - Afrique
|
Posted: Tue Oct 16, 2007 12:23 pm Post subject: |
|
|
@tous:
Je n'utilise plus conky c'est pour ca qu'il n'y est pas sur mon screenshot... merci pour les améliorations et autres ca pourrait me servir pour d'autre scripts si je me met à faire des "screenlets"
[/b] _________________ - CryoGen` on #gentoofr@irc.freenode.net
- ~amd64 / KDE4
- I'm the bone of my sword... |
|
Back to top |
|
|
fo_o n00b
Joined: 05 Jun 2007 Posts: 47 Location: bourg-en-bresse
|
Posted: Tue Oct 16, 2007 1:58 pm Post subject: |
|
|
@Pwwwet: oulà me rappelle plus, j'ai changer entre temps (et c'est pas un thème xfce, mais gtk ) ya que le panel xfce, sinon c'est pur-openbox
CryoGen wrote: |
Je n'utilise plus conky c'est pour ca qu'il n'y est pas sur mon screenshot... merci pour les améliorations et autres ca pourrait me servir pour d'autre scripts si je me met à faire des "screenlets"
|
Voir même essayer d'intégrer conky dans un screenlets, ça me parait faisable[/quote] _________________ # emerge beer chips life
Calculating dependencies \
emerge: there are no ebuilds to satisfy "life". |
|
Back to top |
|
|
DidgeriDude Guru
Joined: 30 Jan 2005 Posts: 349
|
Posted: Thu Dec 20, 2007 9:44 pm Post subject: |
|
|
Bon je vous poste le mien seulement parce que ce n'est qu'une belle prise de tête avec des ${tab} et des ${voffset}... Mode horizontal oblige ! Mais il est vraiment simple et sans prétention !
Il me manque juste un moyen simple et efficace de tracer des traits verticaux...
Screenshot
.conkyrc :
Code: | background yes
update_interval 0.5
total_run_times 0
alignment top_left
minimum_size 900 600
gap_x 315
gap_y 5
own_window no
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
use_xft yes
xftfont Bitstream Vera Serif:Roman:size=10:encoding=iso10646-1
xftalpha 1
override_utf8_locale yes
uppercase no
default_color black
default_shade_color black
default_outline_color black
cpu_avg_samples 2
no_buffers yes
TEXT
${tab 10}${execi 1 date '+%e %B %Y' | sed -e 's/ / /'}${tab 145 0}${voffset 8}CPU : ${color blue}${cpu}%${color}${tab 225 0}${voffset -9}${cpugraph 20,120}${tab 365 0}${voffset 10}RAM : ${color blue}${memperc}%${color}${tab 45 220}${membar 10,120}${tab 612 0}${color blue}${execi 60 wget http://checkip.dyndns.org/ -O - -o /dev/null | awk -F' |<' '{print $12}'}${color}${tab 720 0}${voffset -3}D/L : ${color blue}${downspeedf eth0} Ko/s${color}${tab 60 705}${voffset -6}${downspeedgraph eth0 15,120}
${voffset -14}${tab 40}${font Bitstream Vera Serif:Bold:size=10:encoding=iso10646-1}${time %H:%M:%S}${font}${tab 580 0}IPs :
${voffset 3}${tab 20}${execi 60 /home/dude/.bin/uptime.sh}${tab 145 0}${voffset -5}Temp : ${color blue}${exec sensors | grep temp2 | awk -F'+|C' '{print $2}'}${color}${tab 250 0}Volume : ${color blue}${exec amixer cget numid=30 | grep : | cut -d= -f2}%${color}${tab 365 0}${voffset -1}Swap : ${color blue}${swapperc}%${color}${tab 45 220}${swapbar 10,120}${tab 612 0}${voffset -2}${addr eth0}${tab 720 0}${voffset 2}U/L : ${color blue}${upspeedf eth0} Ko/s${color}${tab 60 705}${voffset -6}${upspeedgraph eth0 15,120} |
Désolé s'il est confus, mais je suis pas sûr de pouvoir simplifier son écriture...
Last edited by DidgeriDude on Sun Dec 23, 2007 3:04 pm; edited 1 time in total |
|
Back to top |
|
|
skiidoo n00b
Joined: 10 Feb 2007 Posts: 35 Location: Paris, France
|
|
Back to top |
|
|
fo_o n00b
Joined: 05 Jun 2007 Posts: 47 Location: bourg-en-bresse
|
Posted: Sun Dec 23, 2007 3:22 pm Post subject: |
|
|
salut DidgeriDude, vraiment sympa ton .conkyrc.
ça donne beaucoups d'idée pour personnaliser à fond.
dommage que je n'ai plus le net pour le moment, j'aurais bien tester _________________ # emerge beer chips life
Calculating dependencies \
emerge: there are no ebuilds to satisfy "life". |
|
Back to top |
|
|
DidgeriDude Guru
Joined: 30 Jan 2005 Posts: 349
|
Posted: Sun Dec 23, 2007 5:39 pm Post subject: |
|
|
@fo_o : Merci beaucoup.
Par contre, je trouve ça bizarre que tu puisses trouver mon .conkyrc sympa !!
Moi, je le trouve horrible à maintenir car tout tient sur 3 lignes qui sont donc à méga-rallonge !!
Mais comme il fait pil poil la hauteur de mon pager, il reste visible même avec les fenêtres maximisées.
Et puis, petit bonus : un coup de molette souris sur le mot volume et hop celui-ci monte ou descend comme souhaité
Amuse-toi bien, surtout si t'as envie de faire un conky "horizontal" car tu vas t'arracher les cheveux pour les alignements !!
Fab. |
|
Back to top |
|
|
fo_o n00b
Joined: 05 Jun 2007 Posts: 47 Location: bourg-en-bresse
|
Posted: Mon Dec 24, 2007 1:15 pm Post subject: |
|
|
ben je l'ai pas testé, mais à l'horizontal ça sort de l'ordinaire _________________ # emerge beer chips life
Calculating dependencies \
emerge: there are no ebuilds to satisfy "life". |
|
Back to top |
|
|
|