| View previous topic :: View next topic |
| Author |
Message |
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
 Posted: Mon Oct 15, 2007 1:13 pm Post subject: |
 |
|
| are wrote: | | bushwakko wrote: | after following all suggestions from powertop, disabling bluetooth and turning on usb suspend I get:
Cn Avg residency P-states (frequencies)
C0 (cpu running) ( 4.8%) 2.34 Ghz 0.0%
C1 0.0ms ( 0.0%) 2.17 Ghz 0.0%
C2 1.1ms ( 6.5%) 2.00 Ghz 0.0%
C3 2.6ms (88.7%) 1000 Mhz 100.0%
Wakeups-from-idle per second : 402.4 interval: 5.5s
no ACPI power usage estimate available
Top causes for wakeups:
36.1% ( 91.6) <interrupt> : uhci_hcd:usb2, ohci1394, libata
29.9% ( 75. <interrupt> : extra timer interrupt
7.2% ( 18.4) <interrupt> : wifi0
6.9% ( 17.6) firefox-bin : futex_wait (hrtimer_wakeup)
5.2% ( 13.2) <kernel module> : usb_hcd_poll_rh_status (rh_timer_func)
4.0% ( 10.2) Xorg : do_setitimer (it_real_fn)
if I don't use my mouse for a while I might get:
Wakeups-from-idle per second : 271.0 interval: 10.0s
no ACPI power usage estimate available
Top causes for wakeups:
34.5% ( 64.7) <interrupt> : extra timer interrupt
18.2% ( 34.2) firefox-bin : futex_wait (hrtimer_wakeup)
9.3% ( 17.5) Xorg : do_setitimer (it_real_fn)
8.7% ( 16.4) <interrupt> : wifi0
8.6% ( 16.1) <interrupt> : acpi
6.4% ( 12.0) <kernel module> : usb_hcd_poll_rh_status (rh_timer_func)
also, my soundcard still doesn't work:
[ 366.245108] hda_codec: STAC922x, Apple subsys_id=106b1e00
[ 366.273365] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 366.273741] HDA Intel: probe of 0000:00:1b.0 failed with error -16 |
Are you sure, that you activated all the dynticks hires-timers stuff? You still have a lot of wakeups and they seem to be timer related. Why your processors stay outside C3 while idle (12% C0 to C2)???
Although I have another laptop, the technical base ist similar. So less than 100 wakeups should be possible.
Best regards
are |
I have enabled both high res timers and tickless system.
here is my config: http://www.generation.no/~wakko/.config
I do btw run ubuntu.
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
 |
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Mon Oct 15, 2007 1:59 pm Post subject: |
|
|
do you guys use any startup stuff like powernowd cpufreqd cpufrequtils?
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
|
buddabrod
Apprentice
Joined: 15 Oct 2006
Posts: 241
Location: Germany
|
| Posted: Mon Oct 15, 2007 2:09 pm Post subject: |
|
|
| bushwakko wrote: | | do you guys use any startup stuff like powernowd cpufreqd cpufrequtils? |
No. |
|
| Back to top |
|
|
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Mon Oct 15, 2007 2:10 pm Post subject: |
|
|
| buddabrod wrote: | | bushwakko wrote: | | do you guys use any startup stuff like powernowd cpufreqd cpufrequtils? |
No. |
what handles disk spindown and such for you?
btw: does just using the mouse get it up to lik 1500 wakeups per second?
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb
Last edited by bushwakko on Mon Oct 15, 2007 2:18 pm; edited 1 time in total |
|
| Back to top |
|
|
Dottout
l33t
Joined: 07 Mar 2006
Posts: 882
|
| Posted: Mon Oct 15, 2007 2:15 pm Post subject: |
|
|
| try laptop-mode-tools. for cpufreq I suppose that most of us use ondemand governor, no need to run a daemon for it |
|
| Back to top |
|
|
are
Apprentice
Joined: 03 Jan 2006
Posts: 188
|
| Posted: Mon Oct 15, 2007 2:24 pm Post subject: |
|
|
| bushwakko wrote: | | do you guys use any startup stuff like powernowd cpufreqd cpufrequtils? |
No, sorry i'dont. Please could you show your dmesg after startup? Look there for output regarding hires-timers, idles acpi.
regards
are |
|
| Back to top |
|
|
bushwakko
Guru
Joined: 25 Mar 2003
Posts: 495
|
| Posted: Mon Oct 15, 2007 2:24 pm Post subject: |
|
|
is there anything I can to to find out what extra-timer-interrupts is?
_________________
Macbook Pro 15"
Core 2 Duo 2,33ghz
2gb Ram
ATI Mobility x1600 256mb |
|
| Back to top |
|
|
gigs94
n00b
Joined: 06 Aug 2004
Posts: 52
Location: DC
|
| Posted: Mon Oct 15, 2007 2:38 pm Post subject: Automating kamikaze-sources |
|
|
I thought I'd share my little shell script to automatically get new kamikaze-sources whenever they are available.
get_kamikaze.sh
| Code: | #!/usr/bin/env bash
KAMIKAZE_PORTAGE_OVERLAY_DIR="/usr/portageOverlay/sys-kernel/kamikaze-sources"
KAMIKAZE_EBUILD_HTTP="http://kamikaze.waninkoko.info/ebuilds"
cd $KAMIKAZE_PORTAGE_OVERLAY_DIR
wget -r -l1 --no-parent -nH --cut-dirs=1 $KAMIKAZE_EBUILD_HTTP
# remove stuff that we don't need
#FYI: kamikaze-sources-2.6.22-r7.ebuild can't find linux-2.6.22-kamikaze7.bz2 anymore so it can't build the manifest.
rm -rf kamikaze-sources-2.6.22-r7.ebuild index.html* *.gif klight-sources-*
firstEbuild=$(ls kamikaze-sources-* | head -1)
ebuild $firstEbuild digest
|
Then you just add to crontab:
| Code: |
00 04 * * * ~/get_kamikaze.sh > ~/get_kamikaze.out 2>&1
|
Then when you run emege -N world kamikaze-sources will appear automagically when there is a new version (but hopefully, you already knew that). And let me know if there is a better way to do this... |
|
| Back to top |
|
|
Ingmarv
Retired Dev
Joined: 27 Feb 2007
Posts: 188
Location: Belgium
|
| Posted: Mon Oct 15, 2007 2:40 pm Post subject: Re: Automating kamikaze-sources |
|
|
| gigs94 wrote: | I thought I'd share my little shell script to automatically get new kamikaze-sources whenever they are available.
get_kamikaze.sh
| Code: | #!/usr/bin/env bash
KAMIKAZE_PORTAGE_OVERLAY_DIR="/usr/portageOverlay/sys-kernel/kamikaze-sources"
KAMIKAZE_EBUILD_HTTP="http://kamikaze.waninkoko.info/ebuilds"
cd $KAMIKAZE_PORTAGE_OVERLAY_DIR
wget -r -l1 --no-parent -nH --cut-dirs=1 $KAMIKAZE_EBUILD_HTTP
# remove stuff that we don't need
#FYI: kamikaze-sources-2.6.22-r7.ebuild can't find linux-2.6.22-kamikaze7.bz2 anymore so it can't build the manifest.
rm -rf kamikaze-sources-2.6.22-r7.ebuild index.html* *.gif klight-sources-*
firstEbuild=$(ls kamikaze-sources-* | head -1)
ebuild $firstEbuild digest
|
Then you just add to crontab:
| Code: |
00 04 * * * ~/get_kamikaze.sh > ~/get_kamikaze.out 2>&1
|
Then when you run emege -N world kamikaze-sources will appear automagically when there is a new version (but hopefully, you already knew that). And let me know if there is a better way to do this... |
The custom-kernels overlay ? |
|
| Back to top |
|
|
buddabrod
Apprentice
Joined: 15 Oct 2006
Posts: 241
Location: Germany
|
| Posted: Mon Oct 15, 2007 3:08 pm Post subject: |
|
|
| bushwakko wrote: | | buddabrod wrote: | | bushwakko wrote: | | do you guys use any startup stuff like powernowd cpufreqd cpufrequtils? |
No. |
what handles disk spindown and such for you? |
hdparm or bios. CPU frequency is handled by ondemd governor.
| Quote: | | btw: does just using the mouse get it up to lik 1500 wakeups per second? |
Yes it can. |
|
| Back to top |
|
|
gigs94
n00b
Joined: 06 Aug 2004
Posts: 52
Location: DC
|
| Posted: Mon Oct 15, 2007 3:32 pm Post subject: Re: Automating kamikaze-sources |
|
|
| Ingmarv wrote: | | The custom-kernels overlay ? |
Ah... well, yeah. So something like this then:
So, I retract my previous implementation, and advise this instead:
| Code: |
emerge -av layman
layman -S
layman -a custom-kernels
emerge -av kamikaze-sources
|
And then run layman -S whenever you run emerge --sync and you'll get the latest kamikaze-sources.
Sorry this is a bit off-topic... but thought it was good information for anyone that is new to building these builds (like I am). |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Mon Oct 15, 2007 4:44 pm Post subject: |
|
|
Wow. ext4 is fast.  I compiled several heavy programs like xorg-server on a partition with these mount options:
/dev/hda4 on /var/tmp/portage type ext4dev (rw,noatime,delalloc,mballoc,data=writeback,nobh)
It was stable too. Someone said that mballoc wasn't stable, but it worked perfectly for me.  I am using version 1.40.2 of e2fsprogs as well. I haven't noticed anything odd with them yet. Maybe this will give you hope and allows some people to update from 1.39 since a lot of changes went into 1.40.x.
So far so good. I have two experimental filesystems on my computer now.  BTRFS and ext4. Whooo! Way to go me. I bet my hard drive hates me right about now.  |
|
| Back to top |
|
|
hornett
Tux's lil' helper
Joined: 12 Aug 2004
Posts: 84
|
| Posted: Mon Oct 15, 2007 5:38 pm Post subject: |
|
|
Hello Waninkoko,
I would like to use just some of your patches but not others. I have downloaded the broken out patchset, but I have trouble applying the powertop patches. Each hunk fails. Is there anywhere I can find out which order they need to be applied, or which patch depends on which others to work?
Thanks for your hard work! |
|
| Back to top |
|
|
wrc1944
Advocate
Joined: 15 Aug 2002
Posts: 3435
Location: Gainesville, Florida
|
| Posted: Mon Oct 15, 2007 5:42 pm Post subject: |
|
|
Sounds good!  Maybe I'll give it another try, (but this time not on /  )
I just googled for BTRFS info- here's 2 links for those interested in the basics. Thanks StifflerStealth for cluing me in about this new FS- I'm always interested in stuff like this. How's BTRFS working out so far, and what partition do you have it on?
http://oss.oracle.com/projects/btrfs/
http://en.wikipedia.org/wiki/Btrfs
(EDIT: I just realized- maybe we ought to stop what seems like hijacking the kamikaze2 thread???  )
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.36-r7, gcc-13.2.1_p20230304
kernel-6.8.4 USE=experimental python3_11 |
|
| Back to top |
|
|
Dottout
l33t
Joined: 07 Mar 2006
Posts: 882
|
| Posted: Mon Oct 15, 2007 5:54 pm Post subject: |
|
|
| wrc1944 wrote: | Sounds good! Maybe I'll give it another try, (but this time not on / )
I just googled for BTRFS info- here's 2 links for those interested in the basics. Thanks StifflerStealth for cluing me in about this new FS- I'm always interested in stuff like this. How's BTRFS working out so far, and what partition do you have it on?
http://oss.oracle.com/projects/btrfs/
http://en.wikipedia.org/wiki/Btrfs
(EDIT: I just realized- maybe we ought to stop what seems like hijacking the kamikaze2 thread??? ) |
lol indeed, I was thinkin about the same thing, this 3d by now looks like a bunch of friends in a pub |
|
| Back to top |
|
|
kernelOfTruth
Watchman
Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)
|
|
| Back to top |
|
|
dodo1122
Guru
Joined: 02 Sep 2006
Posts: 347
Location: York, England
|
| Posted: Mon Oct 15, 2007 5:58 pm Post subject: |
|
|
| Dottout wrote: | | wrc1944 wrote: | Sounds good! Maybe I'll give it another try, (but this time not on / )
I just googled for BTRFS info- here's 2 links for those interested in the basics. Thanks StifflerStealth for cluing me in about this new FS- I'm always interested in stuff like this. How's BTRFS working out so far, and what partition do you have it on?
http://oss.oracle.com/projects/btrfs/
http://en.wikipedia.org/wiki/Btrfs
(EDIT: I just realized- maybe we ought to stop what seems like hijacking the kamikaze2 thread??? ) |
lol indeed, I was thinkin about the same thing, this 3d by now looks like a bunch of friends in a pub |
Yeah, but where else could we all talk? How about waninkoko creates an official IRC channel for kamikaze, like #kamikaze-sources on freenode, and then we could talk there?
dodo
_________________
#zen-sources on irc.rizon.net |
|
| Back to top |
|
|
Dottout
l33t
Joined: 07 Mar 2006
Posts: 882
|
| Posted: Mon Oct 15, 2007 7:15 pm Post subject: |
|
|
| nice idea |
|
| Back to top |
|
|
StifflerStealth
Retired Dev
Joined: 03 Jul 2002
Posts: 968
|
| Posted: Mon Oct 15, 2007 7:24 pm Post subject: |
|
|
If you want to know more about BTRFS on Gentoo, try this thread:
https://forums.gentoo.org/viewtopic-t-565360-start-75-postdays-0-postorder-asc-highlight-.html
Page 4 has a post by me with the fixed live ebuilds. The version 0.8 and love ebuilds posted before that have a slight bug in them. I mention what it is in a post right before I post the live ebuilds. The live ebuilds are stable. A lot of bug fixes are in them.
Other than that, BTRFS is very nice. It's stable and it does handle /var/tmp/portage very well. I don't know which is better at it: ext4 or btrfs. I have BTRFS partition holding both /var/tmp/ccache and the repos. I have one partition" /dev/hda6 formatted BTRFS and that is broken into subvolumes. That feature is sweet. I can make a new partition without formatting the harddrive. A lot is explained the 4 pages of that thread. I don't think I will move repos off of btrfs, because it handles small files beautifully. Repos on ext3 was slow in comparison. btrfs really has it nailed when it comes to small files and the gentoo repo is thousands of small files, so you really need something that can handle that.
The developer is always looking for extra support, so if you find bugs, report them or if you know how to fix, he loves patches and gives credit.
Glad you are interested in btrfs. |
|
| Back to top |
|
|
Waninkoko
Guru
Joined: 13 May 2005
Posts: 549
|
| Posted: Mon Oct 15, 2007 7:34 pm Post subject: |
|
|
| hornett wrote: | Hello Waninkoko,
I would like to use just some of your patches but not others. I have downloaded the broken out patchset, but I have trouble applying the powertop patches. Each hunk fails. Is there anywhere I can find out which order they need to be applied, or which patch depends on which others to work?
Thanks for your hard work! |
Check the "series" file to know the right order.
PD: I've got btrfs working on kamikaze3 |
|
| Back to top |
|
|
yngwin
Retired Dev
Joined: 19 Dec 2002
Posts: 4572
Location: Suzhou, China
|
| Posted: Mon Oct 15, 2007 8:03 pm Post subject: |
|
|
| dodo1122 wrote: | | Yeah, but where else could we all talk? How about waninkoko creates an official IRC channel for kamikaze, like #kamikaze-sources on freenode, and then we could talk there? |
Well in the meantime, I wouldn't mind if you'd use #berkano on freenode for that. It's not like it's a very busy channel anyway...
_________________
"Those who deny freedom to others deserve it not for themselves." - Abraham Lincoln
Free Culture | Defective by Design | EFF |
|
| Back to top |
|
|
Waninkoko
Guru
Joined: 13 May 2005
Posts: 549
|
| Posted: Mon Oct 15, 2007 8:26 pm Post subject: |
|
|
| kamikaze-sources has its official channel!! #kamikaze |
|
| Back to top |
|
|
hornett
Tux's lil' helper
Joined: 12 Aug 2004
Posts: 84
|
| Posted: Mon Oct 15, 2007 8:29 pm Post subject: |
|
|
| Thanks but the patch still wouldn't apply. No obvious reason why it was failing either. Doesn't matter tho, I just applied the lot in the end. Compiling now |
|
| Back to top |
|
|
dodo1122
Guru
Joined: 02 Sep 2006
Posts: 347
Location: York, England
|
| Posted: Mon Oct 15, 2007 9:22 pm Post subject: |
|
|
| Waninkoko wrote: | | kamikaze-sources has its official channel!! #kamikaze |
Nice,
/me /join #kamikaze
dodo
_________________
#zen-sources on irc.rizon.net |
|
| Back to top |
|
|
post-factum
n00b
Joined: 19 Aug 2007
Posts: 14
Location: /ukraine/novi sanzhary
|
| Posted: Mon Oct 15, 2007 9:46 pm Post subject: |
|
|
I tried kamikaze2, but hibernation fails with suspend2. Tuxonice 3.0-rc1 works fine in general.
2.6.22-kamikaze9 worked fine. |
|
| Back to top |
|
|
|
Unsupported Software
