| View previous topic :: View next topic |
| Author |
Message |
AeroIllini
Tux's lil' helper
Joined: 01 Feb 2004
Posts: 89
|
 Posted: Mon Jul 30, 2007 9:52 am Post subject: |
 |
|
mkk,
That's possible. I'll keep it in mind as I'm working other solutions.
My lspci is in the first post, but I'll post it again here for convenience:
| Code: | # lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
03:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
03:0b.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
03:0b.3 Class 0805: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller |
| Code: | # lspci -s 1b.0 -nv
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 1179:0001
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at 5a080000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0 |
|
|
| Back to top |
|
 |
nasask8r
n00b
Joined: 16 Jul 2007
Posts: 19
|
| Posted: Mon Jul 30, 2007 3:24 pm Post subject: |
|
|
| What kind of laptop is this? I just ordered a Dell Inspiron 1420... I hope it doesn't have problems like this. |
|
| Back to top |
|
|
dustice
n00b
Joined: 06 Jun 2007
Posts: 20
|
| Posted: Mon Jul 30, 2007 4:32 pm Post subject: |
|
|
| nasask8r wrote: | | What kind of laptop is this? I just ordered a Dell Inspiron 1420... I hope it doesn't have problems like this. |
On the first post he says he has a Toshiba Tecra A8 laptop. (the latest Inspirons are ICH8 Family btw. I've gotten sound working fine on mine, except for the lack of headphone sensing ... but I'm thinking that it may be because the ALSA driver doesn't fully support it yet)
AeroIllini - just making sure, but what are you using to test if your sound is working? |
|
| Back to top |
|
|
AeroIllini
Tux's lil' helper
Joined: 01 Feb 2004
Posts: 89
|
| Posted: Mon Jul 30, 2007 4:37 pm Post subject: |
|
|
dustice,
I'm running a wav file in aplay. The same file plays just fine on the WinXP side of the house. |
|
| Back to top |
|
|
nasask8r
n00b
Joined: 16 Jul 2007
Posts: 19
|
| Posted: Mon Jul 30, 2007 5:00 pm Post subject: |
|
|
| dustice wrote: | | nasask8r wrote: | | What kind of laptop is this? I just ordered a Dell Inspiron 1420... I hope it doesn't have problems like this. |
On the first post he says he has a Toshiba Tecra A8 laptop. |
Wow, I'm stupid... for some reason I thought he said it was a Dell. |
|
| Back to top |
|
|
mkk
n00b
Joined: 10 Oct 2004
Posts: 56
|
| Posted: Mon Jul 30, 2007 5:35 pm Post subject: |
|
|
Yeah, I have exactly the same chip as you do, on a Toshiba to boot. I'll post ideas as they come to me. I don't know if you have an asound.state file, but here's mine:
| Code: | # cat /etc/asound.state
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 3'
iface MIXER
name 'Mic Boost'
value.0 30
value.1 30
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Mic Playback Volume'
value.0 19
value.1 19
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
}
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 3'
iface MIXER
name 'Front Mic Boost'
value.0 3
value.1 3
}
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Front Mic Playback Volume'
value.0 31
value.1 31
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Mic Playback Switch'
value.0 true
value.1 true
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Line Playback Volume'
value.0 30
value.1 30
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Line Playback Switch'
value.0 true
value.1 true
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'CD Playback Volume'
value.0 31
value.1 31
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'CD Playback Switch'
value.0 true
value.1 true
}
control.14 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'PC Speaker Playback Volume'
value.0 31
value.1 31
}
control.15 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'PC Speaker Playback Switch'
value.0 true
value.1 true
}
control.16 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Capture Volume'
value.0 31
value.1 31
}
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
}
control.18 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value 'Front Mic'
}
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Off-hook Switch'
value false
}
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Caller ID Switch'
value false
}
control.21 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
}
}
|
|
|
| Back to top |
|
|
HelperMaster
n00b
Joined: 31 Jul 2007
Posts: 9
|
| Posted: Tue Jul 31, 2007 12:21 pm Post subject: |
|
|
Hi,
I have the same problem on my lpt Compal FL90, no sound.
I have tryed the kernel built in driver, don't work.
With the alsa-driver, don't work too...
My chipset is recognized but no sound.
Here my outputs :
| Code: | # lspci
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation Mobile SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0407 (rev a1)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0a:00.0 Memory controller: Intel Corporation Unknown device 444e (rev 01)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
0e:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0e:06.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0e:06.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)
0e:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
|
| Code: | cat /etc/modules.d/alsa
# Alsa kernel modules' configuration file.
# ALSA portion
# OSS/Free portion
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
options snd-hda-intel model=toshiba
# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.14 ---
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. --- |
| Code: | # amixer
Simple mixer control 'Master',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 61 [95%] [-3.00dB]
Front Right: Playback 61 [95%] [-3.00dB]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Caller ID',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Off-hook',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
|
| Code: | # cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf8500000 irq 23 |
| Code: | # dmesg
Linux version 2.6.22-gentoo-r2 (root@myroxxorlpt) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #6 SMP Tue Jul 31 09:59:09 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7c80
Entering add_active_range(0, 0, 523984) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523984
early_node_map[1] active PFN ranges
0: 0 -> 523984
On node 0 totalpages: 523984
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292307 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP 000F7C00, 0024 (r2 Compal)
ACPI: XSDT 7FED7EAF, 0094 (r1 Compal CRESTLNE 6040000 LTP 0)
ACPI: FACP 7FEDFBD2, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
ACPI: DSDT 7FED9C80, 5EDE (r2 Compal CRESTLNE 6040000 INTL 20061109)
ACPI: FACS 7FEE2FC0, 0040
ACPI: APIC 7FEDFCC6, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: HPET 7FEDFD2E, 0038 (r1 Compal CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 7FEDFD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TCPA 7FEDFDA2, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A)
ACPI: TMOR 7FEDFDD4, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: SLIC 7FEDFDFA, 0176 (r1 Compal CRESTLNE 6040000 TBD 1)
ACPI: APIC 7FEDFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT 7FEDFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7FED9631, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 7FED8F9F, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 7FED84CF, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 7FED8429, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 7FED7F43, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists. Total pages: 519891
Kernel command line: root=/dev/sda5
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2194.582 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071624k/2095936k available (3233k kernel code, 23132k reserved, 1598k data, 296k init, 1178432k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05c1000 - 0xc060b000 ( 296 kB)
.data : 0xc04285a0 - 0xc05b800c (1598 kB)
.text : 0xc0100000 - 0xc04285a0 (3233 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 4393.51 BogoMIPS (lpj=8787038)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 961 Objects with 69 Devices 175 Methods 27 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 10 Objects with 3 Devices 4 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [02] enable : Transition to ACPI mode successful
CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4148.59 BogoMIPS (lpj=8297193)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
Total of 2 processors activated (8542.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=35
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfddef, last bus=14
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 10 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:.............................................................
Initialized 23/27 Regions 0/0 Fields 27/27 Buffers 11/13 Packages (1014 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
.
Executed 1 _INI methods requiring 0 _STA executions (examined 79 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
pnp: 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved
ACPI: PCI Interrupt 0000:0e:06.0[A] -> GSI 22 (level, low) -> IRQ 16
Time: tsc clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f8200000-f82007ff] Max Packet=[2048] IR/IT contexts=[4/4]
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: b4000000-b6ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: ac000000-afffffff
PREFETCH window: c8000000-cbffffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: f4000000-f7ffffff
PREFETCH window: f0000000-f3ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 5000-5fff
MEM window: a4000000-a7ffffff
PREFETCH window: c0000000-c3ffffff
PCI: Bridge: 0000:00:1c.3
IO window: 6000-6fff
MEM window: 9c000000-9fffffff
PREFETCH window: b8000000-bbffffff
PCI: Bridge: 0000:00:1c.4
IO window: 7000-7fff
MEM window: f8100000-f81fffff
PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: f8000000-f80fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f8200000-f82fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x38 set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 [20070126]
Linux agpgart interface v0.102 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 7FED8C5D, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 0092) - 6 Objects with 0 Devices 3 Methods 0 Regions
ACPI: SSDT 7FED872E, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 0093) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FED8ED7, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 0097) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7FED8BD8, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 0098) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clocksource tsc unstable (delta = -447171652 ns)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75b2402bff]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:dd:e0:15
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 20
ICH8M: chipset revision 3
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000118f8 ctl 0x000118ce bmdma 0x000118e0 irq 20
ata2: SATA max UDMA/133 cmd 0x000118f0 ctl 0x000118ca bmdma 0x000118e8 irq 20
ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8504000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8504400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 22, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-6: new high speed USB device using ehci_hcd and address 2
usb 2-6: configuration #1 chosen from 1 choice
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
usb 4-1: new full speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 296k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
EXT3 FS on sda5, internal journal
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22 PDT 2007
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0dmpr
ipw3945: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:0c:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1044184k swap on /dev/sda7. Priority:-1 extents:1 across:1044184k
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 40100506, writing 40100106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100506, writing 40100106)
eth1: no IPv6 routers present
ipw3945: Error sending cmd #07 to daemon: time out after 500ms.
ipw3945: Error sending cmd #08 to daemon: time out after 500ms.
ipw3945: Error sending cmd #07 to daemon: time out after 500ms.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
ipw3945: Error sending LEDS_CMD: time out after 500ms.
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
eth1: no IPv6 routers present
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA /var/tmp/portage/media-sound/alsa-driver-1.0.14/work/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:558: hda_intel: azx_get_response timeout, switching to polling mode...
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
|
Thx for all. ( scuse my english  )[/quote] |
|
| Back to top |
|
|
LiquidAcid
Tux's lil' helper
Joined: 11 Sep 2006
Posts: 91
|
| Posted: Tue Jul 31, 2007 3:08 pm Post subject: |
|
|
| What about disabling ACPI? Pass acpi=off as kernel parameters. I saw another thread where this solved the problem. |
|
| Back to top |
|
|
AeroIllini
Tux's lil' helper
Joined: 01 Feb 2004
Posts: 89
|
| Posted: Tue Jul 31, 2007 3:13 pm Post subject: |
|
|
That's a decent idea, I've seen that thread, too.
However, I already tried that earlier, with no effect. Plus, this is a laptop ... without ACPI, I'm pretty much sunk. |
|
| Back to top |
|
|
HelperMaster
n00b
Joined: 31 Jul 2007
Posts: 9
|
| Posted: Wed Aug 01, 2007 7:47 am Post subject: |
|
|
| No idea ? |
|
| Back to top |
|
|
linuxkrn
Tux's lil' helper
Joined: 12 Oct 2003
Posts: 140
Location: Denver,Colorado
|
| Posted: Wed Aug 01, 2007 10:57 am Post subject: |
|
|
I have problems too on a HP dv6575us with Intel HD.
This seems to a codec support problem for the cards. Even though they are all Intel HD, they have different codecs supported.
See https://bugs.launchpad.net/bugs/116326
Try this:
| Code: | | cat /proc/asound/card0/codec#0 | head -n1 |
I have a Realtek ID 268, and same issues. It appears that they need to patch a few files in Alsa for this to work. Patches included in the above bug reports. Although I haven't tried them myself. Btw, using gentoo-sources-2.6.22-r2 |
|
| Back to top |
|
|
PaulBredbury
Veteran
Joined: 14 Jul 2005
Posts: 5740
|
| Posted: Wed Aug 01, 2007 11:33 am Post subject: |
|
|
Those patches might be included in media-sound/alsa-driver-9999.
Hint: Use ** at end of line in /etc/portage/package.keywords, if KEYWORDS="" in ebuild. |
|
| Back to top |
|
|
linuxkrn
Tux's lil' helper
Joined: 12 Oct 2003
Posts: 140
Location: Denver,Colorado
|
| Posted: Wed Aug 01, 2007 12:59 pm Post subject: |
|
|
I've tried using the 9999 versions, and still didn't give me sound. I did get some more mixer channels, but no audio even after unmuting.
Furthermore, playing around with model types caused me to kernel panic. (3stack) 
EDIT/UPDATE: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3165 <- My problem, codec isn't supported yet, maybe others too. |
|
| Back to top |
|
|
Ion Silverbolt
n00b
Joined: 04 Nov 2004
Posts: 70
|
| Posted: Wed Aug 01, 2007 7:51 pm Post subject: |
|
|
| I haven't been able to get sound working with the newer kernels either. My backup kernels 2.6.21-r3 and previous all have working sound. Tried both the in-kernel driver and the seperate module in the newer ones. Something obviously is different with the newer kernels that some of the Intel sound controllers don't like. Both 2.6.22-r1 and r2 neither work for me. |
|
| Back to top |
|
|
Ion Silverbolt
n00b
Joined: 04 Nov 2004
Posts: 70
|
| Posted: Wed Aug 01, 2007 11:06 pm Post subject: |
|
|
Ok I managed to get my sound working with a newer kernel however, it required going back to an earlier version of alsa.
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Had to emerge the 1.0.14_rc3 version of alsa for it to work. |
|
| Back to top |
|
|
linuxkrn
Tux's lil' helper
Joined: 12 Oct 2003
Posts: 140
Location: Denver,Colorado
|
| Posted: Thu Aug 02, 2007 10:23 am Post subject: |
|
|
| Ion Silverbolt wrote: | Ok I managed to get my sound working with a newer kernel however, it required going back to an earlier version of alsa.
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
Had to emerge the 1.0.14_rc3 version of alsa for it to work. |
Doesn't work for me. Tried 9999 and rc3 as well.
| Code: | | 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) |
And the codec is a Realtek ID 268. |
|
| Back to top |
|
|
AeroIllini
Tux's lil' helper
Joined: 01 Feb 2004
Posts: 89
|
| Posted: Thu Aug 02, 2007 10:37 am Post subject: |
|
|
| You guys might be having a different problem than me. My card is a Realtek ALC262, not a 268. I'm not saying it *is* different, just something to keep in mind. |
|
| Back to top |
|
|
HelperMaster
n00b
Joined: 31 Jul 2007
Posts: 9
|
| Posted: Thu Aug 02, 2007 7:14 pm Post subject: |
|
|
with the alsa-driver-999 from portage:
/etc/init.d/alsasound start
* Caching service dependencies ... [ ok ]
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-seq ... [ ok ]
* Restoring Mixer Levels ...
alsactl: set_control:991: warning: name mismatch (Master Playback Volume/Front Playback Volume) for control #1
alsactl: set_control:993: warning: index mismatch (0/0) for control #1
alsactl: set_control:991: warning: name mismatch (Off-hook Switch/Front Playback Switch) for control #2
alsactl: set_control:993: warning: index mismatch (0/0) for control #2
alsactl: set_control:1085: bad control.2.value type
* Errors while restoring defaults, ignoring
dmesg | grep hda_codec
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... |
|
| Back to top |
|
|
thelee
Tux's lil' helper
Joined: 22 Jul 2007
Posts: 103
|
| Posted: Fri Aug 03, 2007 12:05 am Post subject: |
|
|
i've got a similar problem trying to get my intel hda to work, slightly different though.
i was getting no sound with mplayer, so i tried all sorts of module/builtin combinations in the kernel settings, tried emerging the unstable alsa-driver/headers packages, etc. all to no avail. and now i get error messages during udev boot about improper function calls or undefined symbols or something when it loads the sound modules (which is weird because i'm using a kernel with the intel hd thing now builtin). BUT, on a whim, i plugged in my headphones, and LO AND BEHOLD, i could hear music playing.
SO, while this is probably a different problem, WHY isn't sound coming out through the main speakers instead of exclusively through the headphone jack?
also my codec is not realtek but SigmaTel STAC9228. currently i'm using the kernel builtins for alsa/intel hd. (no longer seems to work if i compile them as modules) |
|
| Back to top |
|
|
HelperMaster
n00b
Joined: 31 Jul 2007
Posts: 9
|
| Posted: Fri Aug 03, 2007 5:06 am Post subject: |
|
|
New message in dmesg...
| Code: | # dmesg|grep ALSA
ALSA /var/tmp/portage/media-sound/alsa-driver-9999/work/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:563: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x10a90000
|
|
|
|
Multimedia
