| View previous topic :: View next topic |
| Author |
Message |
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
 Posted: Thu Mar 01, 2007 3:10 pm Post subject: [SOLVED] Nokia 6280 |
 |
|
Witam
Staram się 'odpalić' moją Nokie pod Gentoo, ale nie za bardzo mi to wychodzi :) chodzi mi o dostęp do karty MMC w sumie tylko wrzucanie mp3, no może od czasu do czasu jakaś java. Niestety, nie bardzo mi to idzie :(
| Code: |
Feb 28 22:36:00 legion hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0400
Feb 28 22:36:00 legion ehci_hcd 0000:00:02.1: GetStatus port 10 status 001803 POWER sig=j CSC CONNECT
Feb 28 22:36:00 legion hub 2-0:1.0: port 10, status 0501, change 0001, 480 Mb/s
Feb 28 22:36:00 legion hub 2-0:1.0: debounce: port 10: total 100ms stable 100ms status 0x501
Feb 28 22:36:00 legion ehci_hcd 0000:00:02.1: port 10 full speed --> companion
Feb 28 22:36:00 legion ehci_hcd 0000:00:02.1: GetStatus port 10 status 003001 POWER OWNER sig=se0 CONNECT
Feb 28 22:36:00 legion hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0400
Feb 28 22:36:00 legion ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [9] = 0x00010101 CSC PPS CCS
Feb 28 22:36:00 legion hub 1-0:1.0: port 10, status 0101, change 0001, 12 Mb/s
Feb 28 22:36:00 legion hub 1-0:1.0: debounce: port 10: total 100ms stable 100ms status 0x101
Feb 28 22:36:00 legion ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [9] = 0x00100103 PRSC PPS PES CCS
Feb 28 22:36:00 legion usb 1-10: new full speed USB device using ohci_hcd and address 2
Feb 28 22:36:00 legion ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [9] = 0x00100103 PRSC PPS PES CCS
Feb 28 22:36:00 legion usb 1-10: default language 0x0409
Feb 28 22:36:00 legion usb 1-10: new device strings: Mfr=1, Product=2, SerialNumber=3
Feb 28 22:36:00 legion usb 1-10: Product: Nokia 6280
Feb 28 22:36:00 legion usb 1-10: Manufacturer: Nokia
Feb 28 22:36:00 legion usb 1-10: SerialNumber: 352264017542693
Feb 28 22:36:00 legion usb 1-10: uevent
Feb 28 22:36:00 legion usb 1-10: usb_probe_device
Feb 28 22:36:00 legion usb 1-10: configuration #1 chosen from 1 choice
Feb 28 22:36:00 legion usb 1-10: adding 1-10:1.0 (config #1, interface 0)
Feb 28 22:36:00 legion usb 1-10:1.0: uevent
Feb 28 22:36:00 legion drivers/usb/core/inode.c: creating file '002'
Feb 28 22:36:00 legion hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0400
Feb 28 22:36:00 legion Initializing USB Mass Storage driver...
Feb 28 22:36:00 legion usb-storage 1-10:1.0: usb_probe_interface
Feb 28 22:36:00 legion usb-storage 1-10:1.0: usb_probe_interface - got id
Feb 28 22:36:00 legion usb-storage: USB Mass Storage device detected
Feb 28 22:36:00 legion usb-storage: -- associate_dev
Feb 28 22:36:00 legion usb-storage: Vendor: 0x0421, Product: 0x045b, Revision: 0x0381
Feb 28 22:36:00 legion usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Feb 28 22:36:00 legion usb-storage: Transport: Bulk
Feb 28 22:36:00 legion usb-storage: Protocol: Transparent SCSI
Feb 28 22:36:00 legion usb-storage: *** thread sleeping.
Feb 28 22:36:00 legion scsi4 : SCSI emulation for USB Mass Storage devices
Feb 28 22:36:00 legion usb-storage: device found at 2
Feb 28 22:36:00 legion usb-storage: waiting for device to settle before scanning
Feb 28 22:36:00 legion usbcore: registered new interface driver usb-storage
Feb 28 22:36:00 legion USB Mass Storage support registered.
Feb 28 22:36:05 legion usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Feb 28 22:36:05 legion usb-storage: GetMaxLUN command result is 1, data is 0
Feb 28 22:36:05 legion usb-storage: queuecommand called
Feb 28 22:36:05 legion usb-storage: *** thread awakened.
Feb 28 22:36:05 legion usb-storage: Command INQUIRY (6 bytes)
Feb 28 22:36:05 legion usb-storage: 12 00 00 00 24 00
Feb 28 22:36:05 legion usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Feb 28 22:36:05 legion usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 28 22:36:05 legion usb-storage: Status code 0; transferred 31/31
Feb 28 22:36:05 legion usb-storage: -- transfer complete
Feb 28 22:36:05 legion usb-storage: Bulk command transfer result=0
Feb 28 22:36:05 legion usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Feb 28 22:36:05 legion usb-storage: Status code 0; transferred 36/36
Feb 28 22:36:05 legion usb-storage: -- transfer complete
Feb 28 22:36:05 legion usb-storage: Bulk data transfer result 0x0
Feb 28 22:36:05 legion usb-storage: Attempting to get CSW...
Feb 28 22:36:05 legion usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 28 22:36:05 legion usb-storage: Status code 0; transferred 13/13
Feb 28 22:36:05 legion usb-storage: -- transfer complete
Feb 28 22:36:05 legion usb-storage: Bulk status result = 0
Feb 28 22:36:05 legion usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Feb 28 22:36:05 legion usb-storage: scsi cmd done, result=0x0
Feb 28 22:36:05 legion usb-storage: *** thread sleeping.
Feb 28 22:36:05 legion scsi 4:0:0:0: Direct-Access Nokia Nokia 6280 0000 PQ: 0 ANSI: 4
Feb 28 22:36:05 legion usb-storage: queuecommand called
Feb 28 22:36:05 legion usb-storage: *** thread awakened.
Feb 28 22:36:05 legion usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 28 22:36:05 legion usb-storage: 00 00 00 00 00 00
Feb 28 22:36:05 legion usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 28 22:36:05 legion usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
|
i tak cały czas... sporo tych wpisów w logach robi, pojawia się ikonka na pulpicie xfce (pewnie pozostałość po gnome:)), ale wyskakuje błąd hal'a, że nie można zamontować.
Super by było jakby ktoś się podzielił doświadczeniami z podłączeniem telefonu.
Telefon łącze za pomocą kabelka, moduły od usb są :
| Code: |
usb_storage 45572 0
ehci_hcd 37516 0
ohci_hcd 27652 0
|
_________________
http://www.koniec-iti.eu
Last edited by kacper on Tue Mar 20, 2007 8:48 pm; edited 1 time in total |
|
| Back to top |
|
 |
garwol
Tux's lil' helper
Joined: 28 Aug 2006
Posts: 81
Location: Świdnica
|
| Posted: Thu Mar 01, 2007 3:44 pm Post subject: |
|
|
nie lepiej kupic czytnik kart mmc? na alegro to koszt doslownie 5zl! ja mam np taki i dziala wysmienicie, rozpoznawany jest jako pendrive
_________________
If you don't live for something, You'll die for nothing... |
|
| Back to top |
|
|
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
| Posted: Thu Mar 01, 2007 3:46 pm Post subject: |
|
|
| garwol wrote: |
nie lepiej kupic czytnik kart mmc? na alegro to koszt doslownie 5zl! ja mam np taki i dziala wysmienicie, rozpoznawany jest jako pendrive
|
miałem już czytnik kart, niech to będzie ostateczność jak nie uda się 'odpalić' normalnie :)
_________________
http://www.koniec-iti.eu |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2401
Location: Legnica, Poland
|
|
| Back to top |
|
|
Redhot
Apprentice
Joined: 16 Jul 2006
Posts: 196
|
| Posted: Fri Mar 02, 2007 4:36 pm Post subject: |
|
|
Mi Nokie E61 kernel potrafi obsługiwać od wersji 2.6.18.
Mountować trzeba przez:
| Code: | | mount /dev/sda /mnt/e61 |
|
|
| Back to top |
|
|
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
| Posted: Tue Mar 20, 2007 8:10 pm Post subject: |
|
|
| Redhot wrote: | Mi Nokie E61 kernel potrafi obsługiwać od wersji 2.6.18.
Mountować trzeba przez:
| Code: | | mount /dev/sda /mnt/e61 |
|
W moim przypadku to sdb, ale i tak nie mountuje :
| Code: |
legion kacper # mount /dev/sdb1 /mnt/nokia/
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
legion kacper # mount /dev/sdb /mnt/nokia/
mount: you must specify the filesystem type
legion kacper # mount -t vfat /dev/sdb /mnt/nokia/
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
legion kacper # dmesg |grep sdb
VFS: Can't find a valid FAT filesystem on dev sdb.
|
_________________
http://www.koniec-iti.eu |
|
| Back to top |
|
|
kacper
Guru
Joined: 07 Feb 2004
Posts: 300
Location: Poland, Słubice
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish) 
